Condition: excellent (used), Year of construction: 2014, INGERSOLL RAND R 75 N Screw Compressor NIRVANA VSD Variable speed (inverter) Iedpokyuyzofx Abcotd Motor 75 kW Capacity 12.88 m³/min Pressure 10 bar Year of manufacture 2014 Compressor in full working order.

Condition: excellent (used), Year of construction: 2014, volume flow: 18.4 m³/h, operating pressure: 8 bar, BOGE S 150 screw compressor 110 KW engine Capacity 18.40 m3/min Pressure 8 bar Year of production 2014 Mileage 18,000 hours Itsdpfxet Au Tbo Abcod THE COMPRESSOR IS FULLY FUNCTIONAL.

Condition: good (used), Year of construction: 2014, Offer 26042 Iodjyrfzpspfx Abcjtd - Operating hours: 49,500 h - Operating pressure: 11 bar - Delivery rate: 680 l/min - Drive: 400 V / 5.5 kW - Motor speed: 2,950 rpm - Air receiver: 200 L - Required space: approx. W 600 x H 1,600 x D 1,000 mm - Weight: approx. 250 kg

Condition: excellent (used), Year of construction: 2015, volume flow: 1.6 m³/h, pressure (min.): 13 bar, ALUP ALLEGRO 11 Screw Compressor Variable speed (inverter-controlled) Iodpfxjymmdne Abcstd Motor 11 kW Capacity 1.60 m3/min Pressure 13 bar Year of manufacture 2015

Year of construction: 2026, condition: new, The purpose of a compressed air refrigerant dryer is to lower the temperature of the compressed air and remove water and oil particles contained in the air flow. Refrigerant dryers are important in applications where moist air could cause corrosion, contamination or damage to tools, machinery or products. By removing moisture, the dryer increases the reliability and durability of compressed air systems. The refrigerant dryer is designed for maximum efficiency and durability. The main design elements include: 1. Air-to-air heat exchanger In the first stage of the process, the inlet air passes through a heat exchanger, where it is pre-cooled by the cooler air leaving the evaporator. By using countercurrent flow, heat recovery increases the energy efficiency of the entire system. 2. Refrigeration system evaporator In the second stage, the compressed air is fed to the evaporator, where it is cooled to a dew point temperature of 3°C. This results in the condensation of water vapor and oil particles contained in it. 3. Condensate separator After cooling, the gas and condensate mixture is fed to an efficient separator, where the condensate is separated and automatically drained outside the device. 4. Fan control system The variable speed fan technology allows intelligent adjustment of the cooling intensity to the actual demand, which reduces energy consumption and increases the service life of the components. Technical parameters Ijdpfxsmt Dcxs Abcotd Inlet/outlet pipe diameter (BSP) 1 1/2" Maximum operating pressure 10 bar Maximum inlet air temperature ≤ 38°C Dew point temperature 3°C Efficiency 7000 l/min Power 1.37 kW Power supply voltage 230 V Dimensions (L x W x H) 1000 x 550 x 920 mm Weight 95 kg Type and amount of refrigerant R410a, 900 g

Condition: good (used), Year of construction: 2019, machine/vehicle number: API596817, overall weight: 960 kg, pressure (max.): 12.75 bar, Equipment: refrigerant dryer, type plate available, PROD. ALUP Iodpfx Aov E Hwnsbcstd TYPE EVOLUTO 45 S/N API596817 YEAR 2019 CAPACITY (kW) 45 OUTPUT (m3/min) 6.78 CIS (bar) 12.75 INVERTER YES BUILT-IN DRYER YES EXCHANGER YES ON THE TANK NO DOCUMENTS NO NEW/USED USED

Condition: good (used), Year of construction: 2016, High-quality oil-injected screw compressor. Manufacturer: KAESER Model: CSDX 140 Operating overpressure: 13 bar Max. operating overpressure: 15 bar Operating capacity: 592 m3/h (9.86 m3/min) Motor power: 75 kW / 130 A (SIEMENS) Load hours counter: 23,100 h Dimensions: 2110 x 1290 x 1950 (h) Year of manufacture: 2016 Iedjxpffnjpfx Abcotd Technical condition: used, fully functional machine.

Condition: used, New compressed air refrigeration dryer, unused compressed air dryer from stock Compressed air dehumidifier SMC type IDFA3E-23 Compressed air dryer, compressed air dehumidifier Serial No.: PP0213S Year of manufacture: 2011 SMC compressed air dryer IDFA size 3E Flow rate per hour: 12,000 liters/h (12 m³/h) Flow rate per minute: 200 liters/min. Operating pressure max. 10 bar Operating pressure: 0.15 to 1.0 MPa (manufacturer's specification) Refrigerant: R134a Temperature range: 5°C to 50°C Power consumption: 180 watts Power supply: 230 volts, 50 Hz, 1.2 amps Connection pipe thread: 3/8" - Stainless steel heat exchanger, air-cooled condenser - Condensate separator with automatic drain Iodpfx Abeyif I Uscstd - Condensate drainage via hose Space required (L x W x H): 410 x 226 x 473 mm Weight: 18 kg New, unused, in mint condition from stock

Condition: new, Year of construction: 2026, functionality: fully functional, The pressure container is used in the pneumatic control system of various devices and is used to suppress the pulsation of compressed air in the system, securing the optimal mode of compressor work, partial removal of moisture and oil from compressed air, creating its reserve. Characteristics of the 1000l pressure tank A compressed air pressure tank is a cylindrical pressure device consisting of two ellipsoidal bottoms, a jacket with nozzles and valves. Its main function is to dampen pulsations in the compressed air system, which contributes to the optimal operation of the compressor and helps to eliminate moisture and oil from the compressed air. High-quality pressure tanks are particularly suitable for difficult working conditions. Our pressure tank with a capacity of 1000 liters and a pressure of 11 bar is a solid and capacious device, ideal for storing compressed air and other gases under high pressure. It is designed to withstand high pressure and guarantee safe storage of gas. This tank is used in various industries, such as industry, construction, automotive or home workshops. It can be easily connected to an air compressor or other devices generating compressed air, providing a reliable source of gas in production processes and utility applications. With a capacity of 1000 liters, this tank allows for longer periods of operation without the need for frequent refilling. The pressure of 11 bar means that the tank is able to store gas at high pressure, which is extremely useful in applications requiring higher power. Our 11 bar 1000 L pressure tank is solidly made of high-quality materials, which guarantees its durability and safety. It also has appropriate valves and safeguards that prevent leaks and maintain a safe pressure level. What's more, our tank is supplied with complete documentation, passports, certificates and approvals, including information on the materials used in the production process. It has also passed the inspection by the Notified Body of the Office of Technical Inspection. It is marked with a nameplate with the CE symbol and the number of the Notified Body UDT. To sum up, the pressure tank with a capacity of 1000 liters and a pressure of 11 bar is a reliable device that allows the storage of compressed air or other gases at high pressure. Its versatile use makes it a permanent source of gas for various industrial or utility applications. Our offer includes a wide selection of pressure tanks of various capacities, which makes it easy to adapt the model to the specific needs of the installation in a given plant. Our tanks are made of durable steel with increased pressure resistance and covered with a properly prepared paint on both the inside and outside. Models are available for both vertical and horizontal installation, which allows for flexible adjustment to a specific situation. Our tanks are also used in pneumatic control systems for various devices. Technical data: Isdpfx Asv Axzmjbcetd Weight (kg) 230.00 Connections 8 Connection size 1/2", 2" Size 222.7 x 85 cm Tank capacity (l) 1000 Working pressure (bar) 11 Wall thickness (mm) 5 Diameter (mm) Ø 850 Height (mm) 2250 Manufacturer: Cormak

Condition: new, Year of construction: 2026, functionality: fully functional, 500 L COMPRESSED AIR TANK – HIGH-QUALITY PRESSURE VESSEL FOR COMPRESSED AIR SYSTEMS Key Features of the 500 L Pressure Vessel Professional Pressure Design – made from high-quality 4 mm thick steel, resistant to pressure and corrosion. UDT Certification and CE Marking – compliant with European safety and quality standards. Working Pressure of 11 bar – suitable for most pneumatic systems, including those with elevated requirements. Large Capacity – 500 Litres – enables stable supply to pneumatic installations and reduces compressor start-stop frequency. Multi-connection System – 6 connection ports with diameters of 1¼", 2", and ½" allow flexible integration with various installations. High-Quality Craftsmanship – durable anti-corrosion coating both inside and outside the tank. Universal Mounting Position – vertical design saves space in industrial facilities. Construction and Technology – Robust Design for Demanding Applications This compressed air tank is designed for intensive use in industrial environments. The body is made from structural steel with a wall thickness of 4 mm, ensuring resistance to pressure up to 11 bar and long-lasting operation. All welds undergo strict quality control, and the tank’s surfaces are protected with an anti-corrosion coating resistant to chemical and atmospheric factors. The tank is equipped with a nameplate bearing the CE mark and the UDT notified body number, confirming its approval for use in both the Polish and European markets. The set includes complete technical documentation, a pressure vessel passport, and material certificates. Standard Equipment Connection Ports: 6 pcs – diameters 1¼", 2", ½" Ijdpfx Absxbzbpjcetd Nameplate with CE Mark UDT Notified Body Number Complete Technical Documentation and Pressure Vessel Passport Internal and External Anti-Corrosion Coating

Condition: new, Year of construction: 2026, The screw compressor of the Polish brand CORMAK, the THEOR H1515.8 COMPACT series, with an integrated dryer is the most modern solutions used in pneumatics in combination with the use of high-quality materials and components. Low operating costs, ease of use, ergonomic and solid construction as well as high efficiency of the device guarantee effective and trouble-free operation. Key benefits: strong, compact design of a screw compressor from a European manufacturer automation based on modern and quality-tested components to ensure safe and effective work a specially designed cooler ensures optimal working conditions even when the device is heavily loaded connection of the radiator with the module through good quality hydraulic hoses the technology used allows for significant energy savings special air outlet design for more efficient work a powerful and robust pump is installed in the compressor unique filtration system with triple separation for effective work the compressor uses a reliable and reliable solution, which is a direct drive transmission system between the engine and the screw mechanism (via the so-called claw clutch), which ensures: high effective efficiency; more effective leveling of vibrations low noise of the screw compressor thanks to a specially designed soundproof housing (sound insulation boards) Isdpfemrmy Asx Abcstd electronic control from the MAM series allows you to set parameters, including: intervals between service inspections, power failure alarms, phase direction changes, phase loss, overheating. Possibility to buy additional cylinders. Technical parameters: Compressor Engine power 15kW Dimensions 1550x750x1200mm Weight 500kg Exhaust thread G 3/4" General parameters Capacity at 0-6 bar 1700L/min Capacity at 6 bar 1650L/min Capacity at 8 bar 1500L/min Capacity at 10 bar 1500L/min Capacity at 12 bar 1350L/min Capacity at 14 bar 1350L/min The price is a net price. Price does not include shipping costs. For more information, please contact us by phone or e-mail. We invite you to familiarize yourself with the offer on our website.

Condition: new, Year of construction: 2026, The screw compressor of the Polish brand CORMAK, the THEOR H1520 COMPACT series, with an integrated dryer is the most modern solutions used in pneumatics in combination with the use of high-quality materials and components. Low operating costs, ease of use, ergonomic and solid construction as well as high efficiency of the device guarantee effective and trouble-free operation. Key benefits: strong, compact design of a screw compressor from a European manufacturer automation based on modern and quality-tested components to ensure safe and effective work a specially designed cooler ensures optimal working conditions even when the device is heavily loaded connection of the radiator with the module through good quality hydraulic hoses the technology used allows for significant energy savings special air outlet design for more efficient work a powerful and robust pump is installed in the compressor unique filtration system with triple separation for effective work the compressor uses a reliable and reliable solution, which is a direct drive transmission system between the engine and the screw mechanism (via the so-called claw clutch), which ensures: high effective efficiency; more effective leveling of vibrations low noise of the screw compressor thanks to a specially designed soundproof housing (sound insulation boards) electronic control from the MAM series allows you to set parameters, including: intervals between service inspections, power failure alarms, phase direction changes, phase loss, overheating. Possibility to buy additional cylinders. Technical parameters: Compressor Engine power 15kW Dimensions 1550x750x1200mm Weight 500kg Exhaust thread G 3/4" General parameters Capacity at 0-6 bar 1350L/min Capacity at 6 bar 1350L/min Ijdpfxemrmx Ts Abcjtd Capacity at 8 bar 1250L/min Capacity at 10 bar 1250L/min Capacity at 12 bar 1150L/min Capacity at 14 bar 1150L/min Capacity at 16 bar 1050L/min Capacity at 18 bar 930L/min Capacity at 20 bar 930L/min The price is a net price. Price does not include shipping costs. For more information, please contact us by phone or e-mail. We invite you to familiarize yourself with the offer on our website.

Condition: new, Year of construction: 2026, Complete Compressed Air Set: LUFT 1000 INVERTER Screw Compressor + 270L Vertical Air Receiver + IZBERG N10S Air Dryer This complete set includes the LUFT 1000 INVERTER screw compressor, a 270-liter vertical air receiver with full compressed air accessories, and the IZBERG N10S refrigerated air dryer. Designed for professional use, this system is ideal for industrial plants, workshops, and pneumatic installations that demand high performance, energy efficiency, and reliability. The LUFT series screw compressors by the Polish brand CORMAK incorporate the latest advancements in pneumatic technology, paired with high-quality components and materials. Low operating costs, user-friendly operation, robust construction, and high output ensure efficient and hassle-free performance. LUFT 1000 INVERTER Screw Compressor – Technical Specifications: Parameter Value Motor Power 7.5 kW Voltage 400V / 50Hz Output at 0–6 bar 990 L/min Output at 6 bar 950 L/min Output at 8 bar 950 L/min Output at 10 bar 930 L/min Outlet Connection (G) 1/2" Dimensions (L x W x H) 810 x 610 x 850 mm Weight 160 kg IZBERG N10S Refrigerated Air Dryer – Technical Specifications: Parameter Value Inlet/Outlet Pipe Diameter (BSP) 1" Max Operating Pressure 10 bar Max Inlet Air Temperature ≤ 38°C Dew Point Temperature 3°C Flow Capacity 1500 L/min Power Consumption 0.58 kW Power Supply Voltage 230V Dimensions (L x W x H) 380 x 600 x 625 mm Weight 31 kg Refrigerant Type & Quantity R134a, 400 g CORMAK 270L Vertical Air Receiver – Key Features: This 270-liter vertical air tank with an operating pressure of 11 bar is a reliable solution for storing compressed air in industrial environments. It acts as both a buffer tank and a stabilizer for compressor operation. Professional Pressure Vessel Construction – Made from high-grade, 4 mm thick steel, resistant to both pressure and corrosion. UDT Certification & CE Marking – Compliant with EU safety and quality directives. Operating Pressure of 11 bar – Suitable for most pneumatic systems, including those with higher pressure requirements. High Storage Capacity (270 L) – Ensures steady air supply and reduces compressor cycling frequency. Multi-connection Ports – Equipped with five outlets in 1¼", 2", and ½" sizes for versatile system integration. Durable Finish – Internal and external anti-corrosive coating ensures long service life. Space-Saving Vertical Design – Ideal for facilities where floor space is limited. Itsdpexazlrofx Abced Ideal for: Manufacturing facilities Automotive and industrial workshops Pneumatic tool and machine operation Compressed air systems requiring stable pressure and high efficiency This comprehensive compressed air solution offers excellent energy efficiency, stable pressure control, and long-term reliability, making it a perfect fit for demanding industrial applications.

Condition: new, Year of construction: 2026, NEW ON THE POLISH MARKET 230 V screw compressor Screw compressors from the Polish brand CORMAK are a guarantee of quality and reliability. Our several years of experience in selling compressors has allowed us to create models with an excellent price-quality ratio. The presented model is perfect for small workshops or small manufacturing companies. It is characterized by high efficiency (380 l / min) in relation to its dimensions, which allows you to operate several devices at the same time. Very low noise level (60 dB) makes staying in the same room not inconvenient. Thanks to the high-quality components used, the compressor is designed for continuous operation and can be used in industry. CORMAK screw compressors: When you expect the highest quality and efficiency! Are you looking for solutions that exceed market standards? CORMAK screw compressors are synonymous with innovation and reliability, created with the most demanding applications in mind. Innovative design: Our compressors are based on advanced engineering and European precision workmanship. The solid design, enriched with modern components, guarantees long-term and trouble-free operation in all conditions. Efficiency optimization: Thanks to inverter technology and intelligent algorithms, the LUFT 400 dynamically adjusts energy consumption to the current demand for compressed air. This means a significant reduction in operating costs while maintaining maximum efficiency. Proven drive system: The LUFT 400 compressor uses a reliable direct drive that minimizes loads on the screw block and engine, ensuring efficient operation and long service life. Quiet operation and comfort: Designed with attention to detail, our compressors are characterized by an exceptionally low noise level. Effective sound and vibration reduction systems provide a comfortable working environment, which translates into better concentration and well-being of operators. Intelligent control: The intuitive electronic control panel from the MAM series is the command center of your compressor. It allows precise monitoring of parameters, maintenance planning and quick diagnostics, ensuring stability and protection of key components. Adaptation to needs: We understand that each application is unique. CORMAK compressors can be configured with additional air treatment systems, allowing for a perfect fit to the specific requirements of your industry. Dynamic working pressure: Automatic pressure regulation ensures that the compressor delivers exactly the amount of compressed air needed at a given time, maximizing energy efficiency and minimizing losses. Sustainability: We focus on environmentally friendly solutions. Energy-saving technologies used in our compressors not only reduce your bills, but also reduce the impact on the environment, and the heat recovery option allows for maximum energy use. Technical parameters Itodotz S H Nopfx Abcsd Engine power 3.0 kW / 4 HP Voltage 230V/50Hz Efficiency 0-6 bar average 400 L/min Efficiency at 6 bar 390 L/min Capacity at 8 bar 380 L/min Capacity at 10 bar 380 L/min Outlet port diameter (G) 1/2" Dimensions 800 x 520 x 740 mm Weight 95 kg Manufacturer: Cormak

Condition: new, Year of construction: 2026, A set containing THEOR 20 INVERTER screw compressor, N20S refrigeration air dryer. The screw compressor of the Polish brand CORMAK THEOR series is the most modern solutions used in pneumatics in combination with the use of high-quality materials and components. Low operating costs, ease of use, ergonomic and solid construction as well as high efficiency of the device guarantee effective and trouble-free operation. Additional double filtration on the dehumidifier! Itsdjmqlqdopfx Abced KIT INCLUDES: THEOR 20 COMPRESSOR with inverter (version equipped with inverter) REFRIGERATION AIR DRYER N20S The set does not include a tank! Possibility to buy additional cylinders THEOR 20 COMPACT technical parameters Compressor Engine power 15kW Dehumidifier Engine power 0.69kW General parameters Capacity at 6 bar 1800 lpm Capacity at 8 bar 1700 l/min Capacity at 10 bar 1600 l/min Departure G3/4" The price is a net price. Price does not include shipping costs. For more information, please contact us by phone or e-mail. We invite you to familiarize yourself with the offer on our website.

Condition: new, Year of construction: 2026, Set including LUFT 1500 Inverter Screw Compressor, 1000L Vertical Air Receiver with Accessories, and IZBERG N20S Dryer The LUFT 1500 screw compressor with inverter, combined with a 1000-liter vertical compressed air tank equipped with fittings and the IZBERG N20S air dryer, provides a complete, efficient, and modern solution for compressed air systems. The LUFT series compressor from the Polish brand Cormak represents the latest technology in pneumatics, combining high-quality materials and precision-engineered components. Its low operating costs, ease of maintenance, ergonomic and durable design, and high performance guarantee reliable and efficient operation in industrial applications. Technical Specifications – LUFT 1500 INVERTER Motor Power: 11 kW Voltage: 400V / 50Hz Output at 0–6 bar: 1620 L/min Output at 6 bar: 1580 L/min Output at 8 bar: 1350 L/min Isdpfx Aboxnyhuecjtd Output at 10 bar: 1230 L/min Outlet Connection (G): 1" Dimensions: 1170 × 730 × 1020 mm Weight: 243 kg Technical Specifications – IZBERG N20S Dryer Inlet/Outlet Connection (BSP): 1" Maximum Operating Pressure: 10 bar Max. Inlet Air Temperature: ≤ 38°C Dew Point Temperature: 3°C Flow Capacity: 2800 L/min Power Consumption: 0.58 kW Power Supply: 230V Dimensions (L × W × H): 420 × 700 × 690 mm Weight: 37 kg Refrigerant Type and Quantity: R134a, 550 g Technical Specifications – 1000L Vertical Air Receiver Tank Capacity: 1000 liters Working Pressure: 11 bar Wall Thickness: 4 mm Diameter: Ø 808 mm Height: 2300 mm Weight: 230 kg Number of Connections: 6 Connection Sizes: 2", 1/2" Dimensions: 230 × 80.8 cm

Condition: new, Year of construction: 2026, 270 L COMPRESSED AIR TANK – HIGH-QUALITY PRESSURE VESSEL FOR COMPRESSED AIR SYSTEMS Key Features of the 270 L Pressure Vessel Professional Pressure Design – made of high-grade 4 mm thick steel, resistant to pressure and corrosion. UDT Certification and CE Marking – compliance with European safety and quality standards. Working Pressure of 11 bar – suitable for most pneumatic systems, including those with higher demands. Large Capacity – 270 Litres – ensures stable air supply and reduces compressor start-stop frequency. Multi-connection System – 5 connection ports with diameters of 1", 2", and 1/2" allow flexible integration with various installations. High-Quality Finish – durable anti-corrosion coating inside and outside the tank. Universal Mounting Position – vertical design saves space in industrial environments. Construction and Technology – Robust Design for Demanding Applications This compressed air tank is engineered for heavy-duty use in industrial settings. The body is made from 4 mm thick structural steel, ensuring resistance to pressures up to 11 bar and enabling long-term operation. All welds undergo strict quality control, and the tank surfaces are protected with a corrosion-resistant coating that withstands chemical and atmospheric factors. The tank includes a nameplate with the CE mark and the notified body number of UDT, confirming its approval for use in the Polish and European markets. The set comes with complete technical documentation, a pressure vessel passport, and material certificates. Standard Equipment Itjdexbzalopfx Abcsd Connection Ports: 5 pcs – diameters: 1", 2", 1/2" Nameplate with CE Mark UDT Notified Body Number Complete Technical Documentation and Pressure Vessel Passport Internal and External Anti-Corrosion Coating

Condition: new, Year of construction: 2026, functionality: fully functional, Set containing LUFT 1000 screw compressor, N10S refrigeration air dryer and compressed air tank with a capacity of 500l. The screw compressor of the Polish brand CORMAK, the LUFT series, is the most modern solutions used in pneumatics in combination with the use of high-quality materials and components. Low operating costs, ease of use, ergonomic and solid construction as well as high efficiency of the device guarantee effective and trouble-free operation. Additional double filtration on the dehumidifier! KIT INCLUDES: LUFT 1000 COMPRESSOR REFRIGERATION AIR DRYER N10S 500L TANK Technical parameters LUFT 1000 COMPACT Compressor Isdpfx Absrh E Dqocstd Engine power 7.5kW Dehumidifier Engine power 0.29kW General parameters Capacity at 6 bar 750 lpm Capacity at 8 bar 700L/min Capacity at 10 bar 670 lpm Outlet G3/4" Overall dimensions 1320x650x945 mm Weight 500 kg The price is a net price. Price does not include shipping costs. For more information, please contact us by phone or e-mail. We invite you to familiarize yourself with the offer on our website.

Condition: new, Year of construction: 2026, Set including LUFT 1500 Inverter Screw Compressor, 500L Vertical Air Receiver with Accessories, and IZBERG N20S Dryer The LUFT 1500 screw compressor with inverter, combined with a 500-liter vertical compressed air tank equipped with fittings and the IZBERG N20S dryer, represents a comprehensive, high-performance pneumatic solution. The LUFT series screw compressor by the Polish brand Cormak features state-of-the-art technology, top-quality materials, and reliable components. Its low operating costs, easy maintenance, ergonomic and robust construction, and high efficiency ensure dependable, trouble-free operation in demanding environments. Technical Specifications – LUFT 1500 with Inverter Motor Power: 11 kW Voltage: 400V / 50Hz Output at 0–6 bar: 1620 L/min Output at 6 bar: 1580 L/min Output at 8 bar: 1350 L/min Output at 10 bar: 1230 L/min Outlet Connection (G): 1" Dimensions: 1170 × 730 × 1020 mm Weight: 243 kg Technical Specifications – IZBERG N20S Dryer Inlet/Outlet Pipe Diameter (BSP): 1" Maximum Operating Pressure: 10 bar Maximum Inlet Air Temperature: ≤ 38°C Dew Point Temperature: 3°C Capacity: 2800 L/min Power Consumption: 0.58 kW Power Supply: 230V Dimensions (L × W × H): 420 × 700 × 690 mm Weight: 37 kg Refrigerant Type and Quantity: R134a, 550 g Technical Specifications – 500L Vertical Air Receiver Tank Capacity: 500 liters Working Pressure: 11 bar Ijdoxnyfmspfx Abcjtd Wall Thickness: 4 mm Diameter: Ø 600 mm Height: 2098 mm Weight: 145 kg Connections: 6 Connection Sizes: 1 1/4", 2", 1/2"

Year of construction: 2026, condition: new, functionality: fully functional, The purpose of a compressed air refrigerant dryer is to lower the temperature of the compressed air and remove water and oil particles contained in the air flow. Refrigerant dryers are important in applications where moist air could cause corrosion, contamination or damage to tools, machinery or products. By removing moisture, the dryer increases the reliability and durability of compressed air systems. The refrigerant dryer is designed for maximum efficiency and durability. The main design elements include: 1. Air-to-air heat exchanger In the first stage of the process, the inlet air passes through a heat exchanger, where it is pre-cooled by the cooler air leaving the evaporator. By using countercurrent flow, heat recovery increases the energy efficiency of the entire system. 2. Refrigeration system evaporator In the second stage, the compressed air is fed to the evaporator, where it is cooled to a dew point temperature of 3°C. This results in the condensation of water vapor and oil particles contained in it. 3. Condensate separator After cooling, the gas and condensate mixture goes to an efficient separator, where the condensate is separated and automatically drained outside the device. 4. Fan control system The variable speed fan technology allows intelligent adjustment of the cooling intensity to the actual demand, which reduces energy consumption and increases the service life of the components. Technical parameters Itedpemt Dcqjfx Abcod Inlet/outlet pipe diameter (BSP) 1 1/2" Maximum operating pressure 10 bar Maximum inlet air temperature ≤ 38°C Dew point temperature 3°C Efficiency 3800 l/min Power 0.9 kW Supply voltage 230 V Dimensions (L x W x H) 850 x 480 x 480 mm Weight 59 kg Type and amount of refrigerant R410a, 650 g

Condition: new, Year of construction: 2026, Set containing LUFT 1000 screw compressor, N10S refrigeration air dryer and compressed air tank with a capacity of 270l. The screw compressor of the Polish brand CORMAK, the LUFT series, is the most modern solutions used in pneumatics in combination with the use of high-quality materials and components. Low operating costs, ease of use, ergonomic and solid construction as well as high efficiency of the device guarantee effective and trouble-free operation. Itsdpemqlprofx Abced Additional double filtration on the dehumidifier! KIT INCLUDES: LUFT 1000 COMPRESSOR REFRIGERATION AIR DRYER N10S 270L TANK Technical parameters LUFT 1000 COMPACT Compressor Engine power 7.5kW Dehumidifier Engine power 0.29kW General parameters Capacity at 6 bar 750 lpm Capacity at 8 bar 700L/min Capacity at 10 bar 670 lpm Outlet G3/4" Overall dimensions 1320x650x945 mm Weight 500 kg The price is a net price. Price does not include shipping costs. For more information, please contact us by phone or e-mail. We invite you to familiarize yourself with the offer on our website.

Condition: new, Year of construction: 2026, LUFT 1500 COMPACT Screw Compressor with Refrigerated Air Dryer The LUFT series screw compressor by the Polish brand Cormak represents the latest innovations in pneumatics, combined with the use of high-quality materials and components. Low operating costs, ease of use, ergonomic and robust design, and high performance guarantee efficient and trouble-free operation. Key Features of the Screw Modules in CORMAK Compressors: Modern Technology and Efficiency The screw modules ensure excellent performance and outstanding energy efficiency. Their design focuses on maximizing output while minimizing energy consumption. Precision and Control Thanks to advanced engineering solutions, the screw modules allow for precise control of the compressed air generation process. This translates into stable pressure and optimal operation of the entire pneumatic system. Itsdjxnk Acopfx Abcjd Durability and Reliability The screw modules used in CORMAK compressors are built for longevity. Their sturdy construction and use of high-grade materials ensure reliability even under harsh industrial conditions, minimizing downtime and the need for frequent repairs. Integrated Refrigerated Air Dryer – Top-Level Air Quality Two-Stage Drying System Effectively removes moisture and protects the pneumatic system. Variable-Speed Fan Automatically adjusts cooling capacity according to operating conditions, resulting in energy savings. Dual Filtration System A pre-filter with 3.0 µm accuracy removes larger solid contaminants. A precision filter with 0.1 µm accuracy captures fine oil particles (aerosols) and other impurities, ensuring ultra-clean air. Technical Specifications: Parameter Value Motor Power 11 kW Voltage 400V / 50Hz Output (0–6 bar) 1620 L/min Output at 6 bar 1580 L/min Output at 8 bar 1350 L/min Output at 10 bar 1230 L/min Outlet Connection Diameter (G) 1" Dimensions 1550 x 740 x 1150 mm Weight 500 kg Manufacturer: CORMAK

Condition: new, Year of construction: 2026, A compact set including a Theor 20 and an N20S air-dryer. The newest solution applied in pneumatics, along with quality materials and components. Easy handling, solid chassis and high efficiency. Additional double filtration in the air-dryer. Set by default includes: Theor 20 screw compressor N20S air-dryer 500L Container Theor 20 Compact technical data Compressor Motor power 15 kW Iodpfx Absmqlm Tscstd Air-dryer Motor power 0.69 kW Data Efficiency at 8 bar 2.6 m3/min Efficiency at 10 bar 2.2 m3/min Outlet G3/4" The price is a net price. Price does not include shipping costs. For more information, please contact us by phone or e-mail. We invite you to familiarize yourself with the offer on our website.

Condition: new, Year of construction: 2026, Set containing the LUFT 1000 VSD screw compressor and the N10S air dryer. The LUFT series screw compressor of the Polish brand CORMAK is the most modern solution used in pneumatics combined with the use of high-quality materials and components. Low operating costs, ease of use, ergonomic and solid construction and high efficiency of the device are a guarantee of effective and trouble-free operation. Iedpfxekly Itj Abcotd Additional double filtration at the dryer! Technical parameters LUFT 1000 COMPACT VSD Compressor Motor power 7.5 kW Dryer Motor power 0.29kW General parameters Efficiency at 0-6 bar 990 l/min Efficiency at 6 bar 950 l/min Efficiency at 8 bar 950 l/min Efficiency at 10 bar 930 l/min Outlet G 3/4" Overall dimensions 1320 x 650 x 945 mm Weight 500 kg Manufacturer: Cormak

Condition: new, Year of construction: 2026, 500 L COMPRESSED AIR TANK – HIGH-QUALITY PRESSURE VESSEL FOR COMPRESSED AIR SYSTEMS Key Features of the 500 L Pressure Vessel Professional Pressure Design – made of high-grade 4 mm thick steel, resistant to pressure and corrosion. UDT Certification and CE Marking – compliance with European safety and quality standards. Working Pressure of 11 bar – suitable for most pneumatic systems, including those with higher demands. Large Capacity – 500 Litres – ensures stable air supply and reduces compressor start-stop frequency. Multi-connection System – 6 connection ports with diameters of 1.1/4", 2", and 1/2" allow flexible integration with various installations. High-Quality Finish – durable anti-corrosion coating inside and outside the tank. Universal Mounting Position – vertical design saves space in industrial environments. Itodpfx Aexby D Aobcjd Construction and Technology – Robust Design for Demanding Applications This compressed air tank is engineered for heavy-duty use in industrial settings. The body is made from 4 mm thick structural steel, ensuring resistance to pressures up to 11 bar and enabling long-term operation. All welds undergo strict quality control, and the tank surfaces are protected with a corrosion-resistant coating that withstands both chemical and atmospheric conditions. The tank includes a nameplate with the CE mark and the notified body number of UDT, confirming its approval for use in both Polish and European markets. The set comes with complete technical documentation, a pressure vessel passport, and material certificates. Precision and Efficiency – Stable Pressure and Optimized Compressor Operation Thanks to its large 500-litre capacity, the tank acts as an air buffer, stabilizing pressure throughout the pneumatic system. This ensures consistent operation of air-powered devices and significantly extends compressor lifespan by reducing the number of start-stop cycles. The vertical design allows for space-efficient installation, which is especially important in facilities with limited room. A properly matched tank helps minimize pressure drops and prevents pneumatic system overloads, resulting in greater efficiency and enhanced safety across the entire installation. Standard Equipment Connection Ports: 6 pcs – diameters: 1.1/4", 2", 1/2" Nameplate with CE Mark UDT Notified Body Number Complete Technical Documentation and Pressure Vessel Passport Internal and External Anti-Corrosion Coating