Used dust extractors / dedusters for sale (117)

Condition: new, Year of construction: 2024, volume flow: 3,000 m³/h, total length: 1,500 mm, total height: 2,000 mm, input voltage: 380 V, power: 3 kW (4.08 HP), Odprasivac sa 2 vrece ulaz fi 180mm , takodje vrsimo izradu raznih vrsta odprasivaca po zelji kupca Hfedot Etpyjpfx Ah Dsr

Condition: new, Year of construction: 2025, functionality: fully functional, The DC3000 from CORMAK is an advanced sawdust cyclone designed for intensive dust extraction processes in the woodworking, furniture and metalworking industries. Thanks to its state-of-the-art cyclone separator, powerful sawdust fan and double filtration system, the unit ensures effective air cleaning of fine and coarse dust fractions. The sawdust extractor DC3000 is distinguished by its automatic filter shaking and remote control - which significantly increases the comfort and efficiency of daily work. Technical parameters Extraction capacity 2000 - 7000 m³/h Fan rotation speed 2800 rpm Suction nozzle diameter 3 x 100 mm / 1 x 200 mm Number of containers 2 Motor power 3 kW / 400 V Hfedpfxjwwtz Ne Ah Dor Dimensions 1300 x 1000 x 2200 mm Weight 219 kg Standard equipment Automatic filter shaker Remote control Pressure gauge Double filtration system (main and pre-filter) Metal container under the separator Transport wheels

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 2000x800x2500 mm Weight 400 kg Total power requirement 2,2 kw Hjdev A Hxyepfx Ah Djfr

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, type of input current: three-phase, overall weight: 400 kg, input voltage: 400 V, input frequency: 50 Hz, power: 0.37 kW (0.50 HP), Aerotech OWW4A dust collector Hfedpfotxmqlsx Ah Dor Year of production 2005. Dust collector in working order.

Condition: used, Year of construction: 1993, used dust extractor Year of manufacture: 1995 Motor 2.2 kW Extraction nozzle 160 mm 20 m² filter surface Hedpfxsvymgfs Ah Defr Nominal volume flow 1900 cbm/h with automatic pneumatic cleaning with 2 filter cartridges and 2 dust collection bins Height 2500 mm Length 2200 mm Availability: short term Location: Röllbach

Condition: new, Year of construction: 2025, Extraction nozzle 355 mm Nominal motor rating 15.0 kW / 3 Ph Voltage 400 V / 50 Hz Max. flow rate ca. 10,000 m3/h Nominal flow rate* 7,127 m3/h Vacuum at nominal flow rate 3,000 Pa Filter area 73 m2 Pre-separator Integrated Extinguishing device Integrated Swarf collection capacity (net / gross) 3 x 165 L / 3 x 250 L Sound pressure level 73 dB(A) Dimensions (L / W / H) in mm 3,130 x 1,058 x 2,351 Weight net 1,040 kg Hfedpfjfzbqysx Ah Dsr

Condition: good (used), Year of construction: 2012, Year of manufacture: 2012 Air Volume: 3530 m3/h Pressure increase: 2500 Pa Extraction stub gauge: 250 mm Filter surface: 24,2 m2 Hfedpfxovxrnfj Ah Dor Power: 5,5 kW, Voltage: 400 V, Frequency: 50 Hz Weight: 740 kg Volume dust bin: 480 L Dimensions L x W x H: 3200 x 1020 x 2250 Filter Regeneration: Compressed-Air Pulse (Jet)

Condition: new, Year of construction: 2025, functionality: fully functional, Self-cleaning dust filter, more effective than cloth and felt bags. Holds dust up to 2 microns, thus guaranteeing increased cleanliness and safety at the workplace. The filter is equipped with a self-cleaning system. Technical specifications Cylinder diameter: 500 mm Height: 1175 mm Weight: 14 kg The filter also fits to extraction models: FM300, FM340, FM300S, FM300SA, FM500 Hfjdowwtnvepfx Ah Djr Manufacturer: Cormak

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 3480x1100x2500 mm Weight 900 kg Hedpfxovz Hc As Ah Dofr Total power requirement 5,5 kw

Condition: excellent (used), Year of construction: 2018, Only a few running hours. The table must be connected to a external dust extractor. We ship all over EU. Hedpow T Sicefx Ah Djfr

Condition: used, Year of construction: 2011, functionality: fully functional, machine/vehicle number: V-006-11, volume flow: 3,300 m³/h, Extraction filter device for filtering dust and small sawdust with a large filter surface and large collection bags. Hjdpewgb H Eefx Ah Dsfr Used on CNC as a drain for wood dust and sawdust. Including motor.

Condition: new, Year of construction: 2025, The POWER UNIT 160 P is an approved clean-air dust extractor in a self-supporting sheet metal construction made from coloured powdered sheet steel. The device conforms to the most recent regulations, is certified with the BG–GS test seal, in accordance with GS-HO-07 (with endorsement for residual dust concentration test seal H3) and, thus, it can be directly installed in the workroom without additional fire or explosion protection measures. Therefore, it provides an ideal production condition with healthy air at the workplace. It is also suitable for use in workshops with a utilization factor of 2-4 machines (dependent on the required volume-flow), as well as to supplement a stationary plant as local extraction for universal application with different materials. The small external dimensions also allow the dust extractor to be installed in confined workshops. Technical data POWER UNIT 160 P : • Intake connection 160 mm • Motor rating 2.2 kW; 3 Ph; 400 V/ 50 Hz • Max. volume-flow 2,000 m³/h • Volume-flow at the connection at 20/ 22 m/s 1,448/ 1,592 m³/h • Vacuum at the connection at 20/ 22 m/s 2,503/ 2,399 Pa • Filter area 9.1 m² (23 x Ø 125 mm, 1000 mm long) • Filter cleaning Compressed air cleaning • Filter material Cat. M, el, white washable • Impact on filter 160 m³/m²/h • Max. noise level 71 dB(A) • Residual dust content H3 / (ᐸ0,1 mg/m³) • Swarf collection volume ca. 165 (241) liter • Basic controls Micro SPS-Logo Siemens without display • Electrical connections 5 m connection cable with CEE plug 5 poles, 16 A, with phase inverter • Compressed air supply ½” standard plug compressed air consumption 108 Std.l/ 6 bear • Volume flow monitoring differential pressure cell with warning lamp on control box • Dimensions (L x W x H) 1,688 x 830 x 2,050 mm • Undercarriage 4 plastic castors 125 mm, two of them steerable, one with locking Hfjdpfx Asfydzbsh Dor • Weight 340 kg • Design / Control side choice right / left • Finishing RAL 7001 (silver grey) and RAL 7035 (light grey)

Condition: used, Year of construction: 2000, functionality: fully functional, This Dustomat-63 Hfodpfxexakdkj Ah Djr - Suction nozzle Ø: 160 mm - Main motor: 3 kW - Item description: mobile, CE-mark, 3 kW, Ø=160 mm - Filter cleaning - Mobile separator container - Rated volumetric flow: 1,850 m³/h

Condition: new, Year of construction: 2025, The DCV8900E+ professional industrial extraction unit has been designed for the most demanding working environments. It is a high-performance unit designed to remove sawdust, dust and shavings from carpentry machines, guaranteeing continuous extraction performance throughout the production cycle. Thanks to its compact design and high suction power, the central extraction unit is suitable both as a stand-alone unit and as part of a multi-point extraction system. Technical data Motor power S1 7.5 kW / 400 V, 50 Hz Motor speed 3000 rpm Extraction capacity 8900 m³/h Hjdpfswwq Ndex Ah Dsfr Suction nozzle diameter 300 mm Suction speed 32 m/s Number of filters 45 Filter material Polyester (5 microns) Filter area 20 m² Dimensions (L x W x H) 2400 x 1170 x 2240 mm Weight 500 kg Standard equipment 45 polyester filters (5 microns) metal rotor and rotor housing hermetic film containers integrated filter cleaning system

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 5470x1100x2500 mm Weight 1100 kg Total power requirement 11 kw Hjdsvz E Nhjpfx Ah Djfr

Condition: used, Vacuum suction filter, for which the filter elements are automatically cleaned with compressed air, equipped with an explosion-proof hatch. Used for transport-suction of abrasive, metal or static materials (small amount of air). Hfjdpfxehcuute Ah Dsr

Condition: new, Holzprofi Maker clean air extraction system with double chip filtration. The first cleaning works via a cyclone, the second cleaning via a filter cartridge. Includes remote control. Nominal volume flow 1350 m³/h Negative pressure V/min 2000 Pa Filter area 2.6 m² Extraction nozzle 150 mm Hjdpfxovrv Age Ah Dsfr Branch 150/100/100/100 Motor rated power 1.5 kW 400V Chip collection volume 160 liters Dimensions 1250 x 650 x 1750 mm Weight 89 kg

Condition: new, Year of construction: 2025, The extractor has a time switch for automatic filter shaking, allowing for any setting of the work cycle! Our technology department has placed great emphasis on creating a motor shaking system, in which the entire filter cleaning cycle takes place automatically in a closed system. A safety lock prevents larger elements from entering the fan. Built-in, soundproof, RETURN OF WARM AIR Reinforced construction with special anti-corrosion coating Very high tightness of the entire suction system, guaranteeing the best air quality inside the plant, and no heat loss during the heating season Advantages of DCV dust extractors have an additional pair of doors for easier bag replacement Durable, massive construction guaranteeing quiet and vibration-free operation of the dust collector the new TC series of extractors has a full upper housing that absorbs noise and vibrations generated during operation and the possibility of returning warm air Very high tightness of the entire suction system, guaranteeing the best air quality inside the plant, and no heat loss during the heating season A strong and quiet radial fan guaranteeing you high negative pressure efficiency Possibility to build a ceiling system and connect several machines working simultaneously with DCV extractors A failure-free filter shaking system with the possibility of working in an automatic cycle A mobile system mobile, facilitating trouble-free movement of the extractors throughout the plant Waste containers designed to maintain 99.99% airtightness of the system, at the same time they have been equipped with a mobile mobile system Control cabinet for switching the device on/off polyester filter retains dust with a diameter of up to 5 microns, in order to filter smaller particles, a filter, e.g. HEPA, should be used It is forbidden to use this extractor in an explosive atmosphere The extractor is not adapted to work with wet raw materials (e.g. wet sawdust) Before starting the extractor, the lower beam must be dismantled to have free access to the chip containers Reduction - Warm air return additionally payable Technical parameters Supply voltage 400 V Power 18.5 kW (25 HP) Engine speed 3000 rpm Filter type Polyester Hfodpfx Asudaqyeh Der Filter dimensions Φ160 x 920 mm Number of filters 117 pieces Inlet diameter 400 mm Outlet dimensions 595 x 345 mm x2 Efficiency 15000 m3/h Dimensions (width x length x height) 1500 x 3830 x 2410 mm (without upper elbow) Weight 980 kg

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 4590x1100x2500 mm Weight 1000 kg Total power requirement 7,5 kw Hjdpovz E Iqofx Ah Dsfr

Condition: new, Year of construction: 2025, Reliability confirmed by our customers dealing with large orders every day. Pollutants from the filter fall directly into an airtight bag with quick discharge. Designed for the filtration of primarily chips and dust with very fine granulation in the woodworking and furniture industry. Advantages of Cleaning quality guaranteed! space-saving yet capable of extracting large quantities of dust and chips Hodpfxsuc Ucho Ah Dofr trouble-free operation confirmed by production facilities dealing with large orders on a daily basis Robust, vibration-free hardened construction for maintenance-free operation! dynamically balanced metal rotor to reduce noise levels metal intake nozzle with a diameter of 200 mm allows for a much higher air flow!!! possibility to build a ceiling system and feed several machines working simultaneously with the DCV ECO extraction units large filter surface area! have a special blade design, which makes them more efficient and effective, as well as contributing to energy savings very high tightness of the entire extraction system, guaranteeing the best quality of air inside the plant and, during the heating period, no loss of heat quick change of film containers designed to keep the system 99.99% airtight. The DCV 4500E is the next step in the production of efficient sawdust extraction, with the aim of constantly ensuring the same extraction performance throughout the entire extraction cycle. This type of extraction will ensure perfection and cleanliness at the workplace, which will have a direct effect on the quality of your products. Perfectly compatible with the following machines: sanding machines, format saws, veneering machines, panel saws, etc. It is forbidden to use this extraction in explosive atmospheres The extraction is used for working in the carpentry industry with sawdust, shavings, dust (it is not suitable for working with wet material such as wet sawdust) polyester filter retains dust with a diameter of up to 5 microns, for the filtration of smaller particles it is necessary to use a filter such as HEPA Technical parameters CONTINUOUS DUTY MOTOR POWER S1 3.0 kW / 400 V, 50 Hz RPM 2900 rpm SUCTION OUTPUT 4500 m3/h SUCTION NOZZLE DIAMETER 200 mm SUCTION VELOCITY 28-32 m/s FILTER AREA 170 x 1035 mm FILTER MATERIAL Polyester, 5 micron NUMBER OF FILTERS 12 DIMENSIONS 1530 x 665 x 2200 mm WEIGHT 120 kg

Condition: new, Year of construction: 2025, functionality: fully functional, An ideal machine for professional and amateur joiners. The fan optimal output works perfectly with the following machines: planing machines, surfacers, thicknessing machines, milling machines, edge bending machines, sliding table saws. Technical data MOTOR POWER 0.75 kW ROTATIONS 2950 rpm SUCTION OFF EFFICIENCY 1000 m3/h SUCTION FERRULE DIAMETER 100 mm VOLTAGE / FREQUENCY Hfjdpfx Ahjvu Ad As Dsr 230 V

Condition: new, functionality: fully functional, Year of construction: 2025, A machine ideal both for professional and amateur joiners. The fan optimal output works perfectly with the machines such as: planing machines, surfacers, thicknessing machines, milling machines, scaleboarding machines and dimension saws. Machine characteristics MOTOR POWER 3,8kW REVOUTIONS 2950 rpm SUCTION OFF EFFICIENCY 4860 m3/h SUCTION FERRULE DIAMETER 4x 100 mm /1 x 180 VOLTAGE/FREQUENCY 3/400V Hsdpfx Ahjvu Anuj Dsfr

Condition: new, Year of construction: 2025, functionality: fully functional, Self-cleaning dust filter, more efficient than burlap and felt bags. Catches particles up to 2 microns, making workplace cleaner and safer. Technical parameters Cylinder diameter: 500 mm Hodovzpzbopfx Ah Defr Height: 625 mm Weight: 13 kg Manufacturer: Cormak

Condition: new, Year of construction: 2025, The manufacturer guarantees the quality of the treatment. A certified control cabinet allows the correctness of operation to be monitored at all times. The vacuum fan, 7.5 kW / 8900 m3/h, operates on the turbine principle, and the soundproofed design of the fan enables the noise emitted during operation to be significantly reduced. Very high tightness of the entire intake system, guaranteeing the best air quality inside the plant and, during the heating period, no loss of heat. Version with one exhaust duct and one BIG-BAG! Strengths of the SCV dust extraction units Robust solid construction for quiet and vibration-free operation of the dust collector The new TC series of extraction units has a full top casing to absorb noise and vibrations generated during operation and the possibility of warm air return Very high tightness of the entire extraction system, guaranteeing the best indoor air quality and no heat loss during the heating period Powerful and quiet radial fan guaranteeing you a high vacuum performance Possibility to build a ceiling system and feed several machines working simultaneously with the SCVs Trouble-free filter shaking system with automatic operation Mobile chassis to facilitate trouble-free movement of the extraction units throughout the plant Waste containers designed to maintain 99.99% containment of the system, at the same time equipped with a mobile trolley system Control cabinet for switching the unit on/off The polyester filter traps dust with a diameter of up to 5 microns, for the filtration of smaller particles a filter such as HEPA should be used It is not allowed to use this extractor in explosive atmosphere The extraction is not suitable for handling wet material (e.g. wet sawdust) The bottom beam needs to be removed before operating the extraction in order to have free access to the chip boxes Reduction - hot air return extra charge Technical specifications Supply voltage 400 V Power 7.5 kW Motor speed 3000 rpm Filter type Polyester Hfodpfxeup Df Tj Ah Dsr Filter dimensions Φ160 x 960 mm Number of filters 45 pieces Inlet diameter 350 mm Efficiency 8900 m3/h Dimensions 2400 x 1100 x 3600 mm Net weight 540 kg

Condition: new, functionality: fully functional, Year of construction: 2025, The extractor is characterized by high negative pressure and vibration-free operation. Thanks to its appropriate dimensions, the extractor can be placed under the table of the format saw. All our extractors are characterized by simple operation and quick bag change. The metal impeller of the absorber guarantees quiet, failure-free operation of the device. Very favorable price to the efficiency of the device. The extractor works perfectly with saws, format saws, planers, milling machines, etc. Device description For shavings, sawdust, dust from milling machines, planers and saws, etc. High suction power Easy movement thanks to the chassis Impeller and metal housing Quick mounting system for the filter and bag Thanks to its compact design, it takes up little space in the workshop, while maintaining high efficiency of 2200 m / h3!!! Technical parameters SUCTION CAPACITY 2200 m³/h BAG DIAMETERS 500 mm INLET DIAMETER 125 mm MOTOR POWER 2.2 kW / 400V DIMENSIONS 1160 x 605 x 750 mm Hedpfxevuzt Nj Ah Dsfr WEIGHT 50 kg