Used dust extractors / dedusters for sale (110)

Condition: not inspected (used), Year of construction: 1995, Connected load 380V 2.2kW Intake nozzle 200 mm mobile 2x chip bins á 190l Lsdpevz Uhyofx Adwshb Volume flow 2500 m³/h HxWxD: 2160 x 830 x 1900 mm

Condition: reconditioned (used), Year of construction: 2018, functionality: fully functional, machine/vehicle number: 25-28/2018, nominal flow rate: 2,500 m³/h, total width: 750 mm, total length: 2,000 mm, total height: 1,980 mm, compressed air connection: 6 bar, power: 3 kW (4.08 HP), SPÄNEX dust extractor, type SMU 25 Connected load 380V 5.6A 3kW Weight approx. 400 kg mobile Suction nozzle 180 mm Vnenn 2500 m³/h Manual-automatic operating mode Electric-pneumatic filter cleaning pneumatic connection 6 bar Lhedpfstwp Nzex Adwjb HxLxW: 1980 x 2000 x 750 mm

Condition: used, Power connection 480V 4kW Filter area 15.8 m² Vnom 3200 m³/h Vmin 2262 m³/h Lsdpfxjvz U Sre Adwehb Extraction connection D=200 mm Weight approx. 550 kg LxWxH: 2400 x 900 x 2100 mm

Condition: new, Year of construction: 2023, functionality: fully functional, machine/vehicle number: 200642, volume flow: 3,200 m³/h, RIEDEX - Deduster Model DM-200/M-B max. volume flow 3200 m³/h motor power 4.0 kW without extinguishing device Left-hand version Lodpfjtwz Hlsx Adwehb motorized cleaning with chip garbage cans

Condition: reconditioned (used), functionality: fully functional, machine/vehicle number: 2433345525, Suction nozzle 125 mm Nominal volume flow 884 m³/h motor power 2,2 kW 16A mobile weight approx. 194 kg LxWxH: 1000 x 840 x 1650 mm Lsdpfx Adoiw D U Njwshb tank size 730 x 660 mm manual shaking

Condition: as good as new (ex-display), Year of construction: 2025, functionality: fully functional, type of input current: three-phase, filter area: 29 m², volume flow: 6 m³/h, negative pressure: 3.15 Pa, intake manifold diameter: 300 mm, nominal flow rate: 5.8 m³/h, overall weight: 790 kg, total width: 1,250 mm, total length: 2,840 mm, total height: 2,470 mm, input voltage: 400 V, noise level: 68 dB, nominal power: 7.5 kW (10.20 HP), suction capacity: 5.8 m³/h, input frequency: 50 Hz, sheet thickness aluminum (max.): 2 mm, warranty duration: 12 months, Trade fair exhibition unit, deduster with rotary valve 1,500 mm length (dismounted in the picture), incl. control system. Star-delta start, optionally with frequency converter, incl. automatic fire extinguishing system (powder extinguisher) Lsdpfewrnwujx Adwjhb - available immediately -

Condition: used, Year of construction: 2000, functionality: fully functional, This Dustomat-63 - Suction nozzle Ø: 160 mm - Main motor: 3 kW - Item description: mobile, CE-mark, 3 kW, Ø=160 mm - Filter cleaning Lhjdpfx Adsxakdkjwob - Mobile separator container - Rated volumetric flow: 1,850 m³/h

Condition: as good as new (ex-display), Year of construction: 2025, Demonstration model, used only for testing purposes (occupational health and safety authority), dusted and cleaned. Lsdpfx Adjw H Rp Aswehb

Condition: as good as new (ex-display), Year of construction: 2025, functionality: fully functional, Demonstration model, used exclusively for testing purposes (trade association), intentionally dusted and cleaned. Right-hand version with connection diameter: 300 mm with flange JET cleaning system Motor power: 7.5 kW Filter area: 32 m² Nominal air flow: 5,089 m³/h Maximum air flow: 6,000 m³/h Ledsww Eryepfx Adwshb Vacuum at 20 m/s at suction port: 2,731 Pascal (in dusted condition) Collection volume: 3x160 liters 5-meter connection cable with 32A CEE plug Dimensions: see photo

Condition: good (used), Year of construction: 2005, machine/vehicle number: HSL 1500-8-12/8 GB, type of input current: AC, filter area: 33 m², volume flow: 2,500 m³/h, Dust filter herding with modular fan Technical data: Power consumption 1x15 kW option 2nd 15kw Filter is supplied with 1 side channel fan 2nd side channel fan is optional. Filter surface 33 m² Dust container capacity 40 litres Weight 660 kg Suction connection 2x 160mm Operating volume flow: 2500 m³/h Operating mode: Continuous operation Cleaning: compressed air Compressed air connection must be available Ljdpfx Adjvz Az Iewshb side channel fan: brand: Effepizeta Type: SCL K10-TS Power: 15kw Speed: 2908 rpm

Condition: used, Dust cyclone with rotary valve, dust cyclone 14,400 m³/h,Cyclone system, used machine Year: 2013 Dust Cyclone: HLZ-J 1600 Airflow rate: 14,000 Bm³/h Inlet (suction side): 400 mm Height: 5,853 mm Diameter: 1,695 mm Centrifugal Fan: Ventilatorenfabrik Oelde GmbH Type: HRV 56N-400/M GL360 Airflow rate: 14,400 m³/h Rated power: 22 kW Rotary Valve: Ventilatorenfabrik Oelde GmbH Type: MS 050-390 A Capacity per revolution: 58 liters Ljdpfxex U Amie Adwshb Rotor with 10 fixed rotor blades (cells)

Condition: new, CATALOGUE NUMBER HZ017 PRODUCT FEATURES As standard, they have mobile containers for sawdust, equipped with a pressure system that allows for tight connection of the container with the machine structure. Thanks to this, it is possible to achieve high negative pressures, without losses at individual connection points. Contaminants from the filter fall directly into hermetic containers with the possibility of quick unloading, which have a special suspension system and mobile wheels that allow for easy and quick transport and maneuvering. The 5.5 kW / 6500 m3/h negative pressure fan, at 2 800 Pa, operates on the principle of a turbine, and the soundproofed design of the fan allows for a significant reduction in the noise emitted during operation. The certified control cabinet allows for constant monitoring of the correctness of operation, thanks to the possibility of any location far from the machine. Standard with integrated fan control system and filter cloth cleaning system ADVANTAGES - new machine - CE certificate - high efficiency - professional Scope of delivery: Polyester filter, 5 microns 2 Containers Drive system Filter cleaning using a vibration system with control TECHNICAL DATA extraction efficiency approx. Ledpfx Adox Ux E Iswjhb 8900m3/h engine power 7.5kW rotational speed 3000 rpm voltage 400V, 50Hz extraction nozzle 300mm filter surface 20m2 extraction speed 28m/sec number of filters 45 negative pressure 2800 Pa filter category G filter material polyester dimensions length / width / height 921x2342x2304mm weight 500kg Net price: PLN 18,500 Net price: EUR 4,400 Net price calculated according to the exchange rate of PLN 4.2/EUR (in case of larger exchange rate fluctuations the price may change)

Condition: new, Year of construction: 2026, Step adapter for power tools, consisting of four elements that allow diameter reduction from 100 mm to 68/46/40/35 mm. Ledpfxeycvhne Adwehb

Condition: new, Year of construction: 2026, Features The unit quickly and quietly cleans and filters the air in your workspace. Clear LED display control panel located at the front of the machine. Filters 98% of all dust particles down to 5 microns and 85% of particles as small as 1 micron. Infrared remote control for easy operation — choose between three fan speeds, set the timer, and power the unit on/off. Remote control with automatic shut-off time recording included as standard. The unit can be suspended from the ceiling, providing faster and more efficient air cleaning through better air circulation. Applications Shops Workshops Garages Warehouses Laboratories Schools Kitchens Spray booths Carpentry and joinery shops Scope of delivery: Air filtration unit Mounting eyelets (for easy hanging installation) Remote control Technical data Motor power 150 W Voltage 230 V / 50 Hz Maximum air flow (3 speeds) Low: 840 m³/h Medium: 1080 m³/h Lsdpsycvbbjfx Adwshb High: 2030 m³/h Air velocity (3 speeds) Low: 14 m/s Medium: 19 m/s High: 22 m/s Timer settings 1/2 | 1 | 2 | 4 hours Pre-filter (mesh filter) 5 µm Main filter (bag filter) 1 µm Dimensions 710 × 610 × 310 mm Weight 29 kg Manufacturer: Cormak

Condition: new, Year of construction: 2026, functionality: fully functional, CORMAK FM230 with dust filter is a compact, mobile professional dust extractor designed for efficient removal of chips, dust and sawdust in woodworking workshops. The fine dust filter ensures not only strong suction power but also increased filtration efficiency, improving air quality in the workplace. Main advantages of the machine Performance 1,000 m³/h – ideal for use with medium and small woodworking machines. Dust filter – effectively captures fine particles, including sanding dust. Motor 0.75 kW / 230 V – quiet, energy-efficient operation without the need for three-phase installation. Mobility – four castor wheels allow easy movement around the workshop. Compact design – takes up little space, ideal for small workshops. Lhedpeycuckjfx Adwjb Design and technology The unit is equipped with a metal chip extraction fan ensuring long service life and reliability. The high-quality dust filter effectively separates fine particles from the air stream, reducing workshop dust levels. The solid, powder-coated housing protects internal components, while the sealed suction system prevents pressure loss. Precision and efficiency The CORMAK FM230 woodworking extractor provides stable and consistent suction. With an output of 1,000 m³/h and low power consumption, it efficiently serves a single woodworking machine without interruptions. The fine particle filter also makes it an excellent dust extractor for sanding applications. Applications Small and medium-sized joinery workshops Craft and production facilities Technical schools and training workshops Home and hobby workshops The FM230 works perfectly with milling machines, planers, jointers, belt sanders and thicknessers. Standard equipment Dust filter Waste collection bag Castor wheels with brake Bag fastening clamp Optional equipment Extraction hose Ø100 mm Suction port reducers Additional set of filter bags Technical data Motor power 0.75 kW Extraction capacity [m³/h] 1,000 Vacuum pressure 1,800 Pa Noise level 70 dB Bag capacity 60 L Number of bags 2 (filter + waste) Suction port diameter 100 mm Dimensions (H × W × L) 1,500 × 420 × 600 mm Power supply 230 V Weight 27 kg

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, type of input current: three-phase, overall weight: 400 kg, input voltage: 400 V, input frequency: 50 Hz, power: 0.37 kW (0.50 HP), Aerotech OWW4A dust collector Lhedpfx Aotxmqledwsb Year of production 2005. Dust collector in working order.

Condition: excellent (used), Year of construction: 1999, Höcker Polytechnik Clean Air Dust Extractor – Clean Air Unit Inlet nozzle: right Control cabinet Diameter of inlet nozzle: 300 mm Rated air flow: 5,320 m³/h Minimum air flow: 4,433 m³/h Filter area: 28 m² Filter cleaning: motorized shaking Lhsdpfx Asyb T Ucjdweb 3 collection bins, total capacity: 495 liters Filter material: polyester needle felt Negative pressure at Vmax: 2,700 Pa Design: mobile Overall length: 3,210 mm Motor power: 7.5 kW Electrical connection: approx. 400 Volt/50 Hz Location: ex stock 54634 Bitburg - immediately available -

Condition: used, Year of construction: 2017, Used unit Year of manufacture: 2017 Extraction side: right Test mark: H 3 Nominal airflow: 3534 m³/h Max. negative pressure: 2750 Pa Connection diameter: 250 mm Filter area: 32 m² Dust class: "M", AWN 16 Motor power: 5.5 kW Filter regeneration: pneumatic Lsdpfx Adsx Twh Sjwohb With fire extinguisher as extinguishing device Sound pressure level: 70 dB(A) Incl. mounted switch cabinet Incl. forklift brackets Weight: 962 kg LxWxH: 3650x1540x2570 mm Availability: short-term Location: Flörsheim

Condition: new, Year of construction: 2025, The radial turbine is placed in a negative pressure cabin on the clean air side in special sound-absorbing cabins. The new generation reinforced turbine and large filtration field operate more efficiently and effectively, and also contribute to saving electricity. Advantages The DCV 7500 extractor is another milestone in the production of efficient sawdust and dust extractors, the aim of which is to constantly ensure the same extraction parameters during the entire work cycle. a durable, massive construction guaranteeing quiet and vibration-free operation of the extractor failure-free operation confirmed by production plants dealing with large orders every day takes up little space and yet can extract large amounts of dust and chips a metal suction nozzle with a large diameter of 280 mm ensures excellent air flow a strong and quiet fan guaranteeing high negative pressure efficiency! have a special blade design, which makes them more efficient and effective, and also contributes to saving electricity very high tightness of the entire suction system, guaranteeing the best air quality inside the plant, and no heat loss during the heating season large filter surface possibility of building a ceiling system and connecting several machines working simultaneously with DCV 7500E extractors quick replacement of foil waste bags designed in such a way as to maintain 99.99% airtightness of the system, low noise and high efficiency are ensured by a metal balanced rotor ensures perfection and cleanliness at the workplace, which directly translates into the quality of your products Lodpfxsvzqtxs Adwohb works perfectly with machines such as: grinders, edge banding machines, panel saws, etc. We guarantee high quality cleaning!!! the polyester filter stops dust with a diameter of up to 5 microns, to filter smaller particles, a filter such as HEPA should be used It is prohibited to use this extractor in an explosive atmosphere The extractor is used for work in the carpentry industry with sawdust, shavings, dust (it is not adapted to work with wet raw materials, e.g. wet sawdust) Technical parameters CONTINUOUS OPERATION MOTOR POWER S1 5.5 kW / 400 V, 50 Hz SPEED 2900 rpm SUCTION CAPACITY 7500 m3/h SUCTION PORT DIAMETER 280 mm SUCTION SPEED 28-32 m/s FILTER SURFACE AREA 18 m2 FILTER MATERIAL Polyester, 5 microns NUMBER OF FILTERS 35 DIMENSIONS 1040 x 625 x 2150 mm WEIGHT 306 kg Manufacturer: Cormak

Condition: new, Year of construction: 2025, functionality: fully functional, All our extractors feature simple operation and possibility of quick bag replacement. Metal rotor ensures silent work. Affordable price in comparison to machine's capabilities. Lhsdpfsvu Ryrex Adwjb Metal balanced rotor ensures vibration-free and quiet operation Quick mounting of the burlap extraction bag Stable metal construction Default equipment 8 burlap bags Technical data Suction efficiency 6800 m3/h Bag capacity 4×200 Number of bags 8 Extracting connector diameter 1×180, 4×100 mm Dimensions (L×W×H) 3560×580×2200 mm Weight 152 kg Motor power 5.6 kW Power supply 3-phase, 400V User manual yes EC declaration yes

Condition: new, Year of construction: 2025, functionality: fully functional, FM300 extractor is a simple machine for extracting chips and sawdust. Capability of quick bag replacement and portability due to the wheeled base make our extractor very practical. Additionally, absorber's metal rotor ensures quiet operation. Despite providing such great features as failure-free operation and high efficiency, it is very affordable. Metal balanced rotor ensures vibration-free and quiet operation Quickly mounted BURLAP extraction bag 4-wheeled base makes it portable Stable, metal construction Default equipment Y-shaped extracting connector, 2×100 Metal wheeled base Technical data Suction efficiency 2530 m3/h Lhjdovu Atwjpfx Adweb Engine speed 2850 rpm Bag capacity 150 L Number of bags 2 Extracting connector diameter 1×130, 2×100 mm Dimensions (L×W×H) 940×510×1960 mm Weight 56 kg Motor power 1.5 kW Power supply 3-phased, 400V EC declaration yes

Condition: new, Year of construction: 2025, functionality: fully functional, Vacuum air-flow perfectly sucks out excess sawdust produced during machining wood. Extractor equipped with an extracting connector rotary 180°. Machine features For chips from milling machines, planers and saws High suction power Easy relocating due to the drive system Rotor and metal body Quick attachment system for filter and bag Extracting connector can be rotated 180° simplifying attaching suction hoses Technical data Engine 1.5 kW/400V Speed 2850 rpm Ljdevu Aykjpfx Adwjhb Bags capacity (Diameter / Length) 190 L (500 mm / 1100 mm) Maximum efficiency 3200 m3/h Intake connector 150 mm/ 3×100 mm Rotor diameter 300 mm Dimensions 985×560×2210 mm Weight 45 kg

Condition: new, functionality: fully functional, Year of construction: 2025, CORMAK DC2200 Model The CORMAK DC2200 is a powerful and robust cyclone dust extractor, designed to efficiently purify the air in woodworking shops, furniture factories, and metalworking facilities. Thanks to its cyclone separator, high-performance radial fan, and modern filtration system, the machine ensures effective particle separation and long-term high efficiency. Main Advantages of the CORMAK DC2200 Lhodoxrdhajpfx Adwsb High extraction capacity – up to 2800 m³/h – effective removal of dust and shavings from multiple workstations simultaneously Cyclone separator – separates larger particles before the filter, extending its service life Powerful 2.2 kW (2200 W / 50 Hz) motor – stable and reliable continuous operation Large 151-liter metal container – convenient and safe waste collection Filtration area of 4.8 m² – ensures high efficiency in capturing fine dust particles Compact, mobile design – sturdy frame with transport wheels for easy movement Quiet operation – optimized fan design reduces noise without sacrificing performance Design and Technology The CORMAK DC2200 is equipped with a 365 mm radial fan, generating a maximum static pressure of 2220 Pa. This allows efficient air suction through long ducting systems and multiple workstations. The extractor offers three suction inlets (3 × Ø100 mm) and one main inlet (Ø200 mm) for flexible setup according to the production area layout. The cyclone separation system effectively removes heavier particles at the inlet, directing only pre-cleaned air to the container. The cylindrical filter (Ø370 × 612 mm) ensures consistent airflow even during intensive operation. Performance and Ergonomics The DC2200 extractor is designed for daily use in small and medium-sized workshops. The 151-liter container (Ø620 × 570 mm) provides long working cycles without frequent emptying. With its compact dimensions (1320 × 900 × 1840 mm) and lightweight design (136 kg net), the unit fits easily into any workspace. Applications The CORMAK DC2200 is ideal for use in: Carpentry and furniture workshops Sawmills and wood-processing facilities Model-making and metalworking shops Production of composite and MDF components Standard Equipment Cyclone separator Cylindrical filter with large filtration surface 151 L metal container for dust and shavings Transport wheels Suction inlets: Ø200 mm and 3 × Ø100 mm Technical Specifications Parameter Specification Motor power 2.2 kW / 50 Hz Airflow (without filter) 2800 m³/h Max. static pressure 2220 Pa Fan diameter 365 mm Inlet diameter 1 × Ø200 mm / 3 × Ø100 mm Container volume 151 L Container dimensions Ø620 × 570 mm Filter surface area 4.8 m² Filter dimensions Ø370 × 612 mm Overall dimensions (L × W × H) 1320 × 900 × 1840 mm Weight (net / gross) 136 / 170 kg

Condition: new, functionality: fully functional, Year of construction: 2025, Advantages of DC Chip Extractors Lodpfx Aox Agpzedwshb The purpose of the Vibra Motor shaking system is to ensure stable operating parameters and to monitor the proper functioning of the extractor. A heavy-duty design enhanced with a radial fan guarantees maximum vacuum efficiency. The extractor is intended for dry sawdust and wood chips. Thanks to the airtight construction, it is suitable for operation both outdoors and inside the facility. Adapted for operation in a positive-pressure system (fans work on the contaminated side of the dust collector) as well as in a negative-pressure system (fans work on the clean side of the dust collector). The sound-insulated design and specially shaped impeller blades contribute to quiet and efficient operation while minimizing electrical power consumption. A key advantage of the extractor is the use of flexible and durable seals in critical areas, improving the tightness of the entire system without heat loss at connection points. A multifunctional device with a modular system allowing any configuration of the extractor. Warm air recovery system. Control cabinet equipped with an intuitive control panel that allows monitoring of filter contamination levels. For filtering smaller particles, a filter such as HEPA should be used. It is forbidden to use this extractor in an explosive atmosphere. The extractor is not designed to work with wet material (e.g., wet sawdust). Industrial Chip and Sawdust Extractor DCV21750 Technical Specifications Motor Power: 25 HP / 400 V, 50 Hz Extraction Capacity: 21,750 m³/h Inlet/Outlet Diameter: 400 / 400 mm Suction Speed: 28 m/s Number of Filters: 2 × 48 Number of Waste Bags: 8 Dimensions (L × W × H): 4600 × 1700 × 3500 mm Weight: 1400 kg SPECIAL OFFER!!! LAST UNIT IN STOCK!

Condition: new, Year of construction: 2025, functionality: fully functional, Self-cleaning dust filter, more efficient than burlap and felt bags. Catches particles up to 2 microns, making workplace cleaner and safer. Ledpfx Adovzpzbswjhb Technical parameters Cylinder diameter: 500 mm Height: 625 mm Weight: 13 kg Manufacturer: Cormak