Condition: used, Year of construction: 1996, core drilling diameter max. 25 mm bore depth 1000 mm swing diameter mm total power requirement 25 kW weight of the machine ca. 12,5 t dimensions of the machine ca. m T B T (Germany) CNC-Controlled Horizontal Deep Hole Drilling " Centre " Model BWP 250 Year 1996, but reconditioned mechanically and electrically in 2006 _____ Working range: X Axis, machine column cross 2,000 mm Z Axis, drilling slide horizontal 1,200 mm Drilling depth 1.000 mm Y Axis, drilling slide vertical 1,100 mm Table clamping area 1,200 x 2,000 mm Drilling capacity in solid material, approx. 4 - 25 mm Tool holder taper HSK 50 Spindle speeds 1.260 - 15,000 rpm Feed rates / quickfeed, XYZ, infinitely variable 100 - 10,000/15.000 mm/min. Force rate of feed motors 27 Nm / 1.000 daN Spindle drive steplessly adjustable 7 kW Total electrical load, approx. 30 kW - 400 V - 50 Hz Weight, approx. 10,000 kg Accessories / Special Features: " Ideal machine for the complete processing of large workpieces like tool a. dies (cooling holes) mould- and dieplates, hydraulicparts etc. by means of deep hole drilling up to 25 x 1.000 mm, face milling up to Ø 60 mm, spiral twist drilling, counterboring and threading up to M 24 x 3 mm. " SIEMENS Continuous Path Control in 4 axes Model 840 D, with process monitoring for coolant pressure, operation data control function, toollife, feed force,Error diagnostics and easy dialogueprogramming directly on the panel, etc. " High Frequency Spindle Make GAMFIOR with stepless speeds " Hydraulically movable drill bush carrier, swivels 90° for holding gun drills (ELB) or picking up regular tools from the tool changer like twist drills, milling tools, taps, etc. " With automatic tool changer made by MIKSCH, Model CTM 40, using a 12-position tool changer, which is mounted on the r.h.side of machine housing, in fixed position, only moving forward and backward for tool changing operation. " Built-on indexing table as B-Axis made by FIBRO Model RTN 400 = 420 x 420 mm, " Extra Rotary Table made by FIBRO with Ø 1.000mm, for indexing 3-144 positions " Built-in coolant device with chip conveyor and various filters. " 2 steady rests. " Completely covered working area with access at the front and at the side. Condition : Very good condition. This is a rare and valuable machine. Under Power Dob Ey Ugst Hw Ayoiocg Delivery : immediately ex our Stock Payment : Net, after conclusion of contract.

Condition: good (used), Aciera 22VA precision drilling machine Dcebsqvnqxo Ey Ugiog - In very good condition. - Up to date in terms of safety. - Cross table and digital display included.

Condition: ready for operation (used), machine/vehicle number: 13110506, Item number MA1165 Manufacturer Flott Type SB 10 Year of manufacture older Machine-No. 13110506 length [mm] 600 Dcsb Eyelz I Twe Ugijg width [mm] 300 height [mm] 1500 Weight [kg] 70 Connected load 380V Gear [rpm] 400/4800 Mounting MK 2

Condition: good (used), JUARISTI MDR-125 Dob Ey Ujv Dgm Hegiocg Spindle: 125 mm Travels: 2000 x 2000 x 2000 mm DRO,universal head and Spindle support

Condition: used, bore capacity in steel (diameter) 17 mm turning speed range - drilling 200-3000 U/min boring chuck 3-16 mm weight of the machine ca. 120 kg dimensions of the machine ca. 1 x 0,5 x 2 m Djb Eou Hak Ijy Ugiocg No. 1328: Bench drill FLOTT, type TB 10 S drill chuck 3-16 mm Fixed lower table height-adjustable intermediate table Drill spindle holder MK 2 6 speeds 3-16 mm

Condition: excellent (used), Year of construction: 1995, Functionality: fully functional, High precision drilling and milling machine Fehlmann model Picomax 51 CNC Heidenhain TNC 360 very good condition CE conform Hthrgw39X Dcsb Ey Usuxprlegiog Technical Data: >> Year of construction: 1995 >> Travel X/Y/Z 420/ 240/ 120 mm >> Travel distance W 450 mm >> Clamping surface (L x W) 730 x 280 mm >> Permissible table load 75 kg >> Distance table - spindle nose 0 - 560 mm >> Feed speed X/Y 1 - 7200 mm/min >> Feed speed Z 1 - 3600 mm/min >> Tool quick-change system SF 32 >> Infinitely variable speed range 9200 rpm >> Drive power 4 kW >> Space requirement approx. (W x D x H) 2.0 x 1.5 x 2.4 m >> Fourth axis dividing head About the machine : We offer a high-precision drilling and milling machine Fehlmann model Picomax 51 CNC in very good condition with CE conformity. It has a Heidenhain TNC 360 contouring control. The program creation in the user-friendly Heidenhain plain text dialog is particularly easy. HEIDENHAIN TNCs are workshop-oriented contouring controls with which you can program conventional milling and drilling operations directly on the machine in easy-to-understand plain-language dialog. The tool holders (see pictures) are included. Mechanically and electrically tested. Take the opportunity to inspect and try out this machine under power on site.

Year of construction: 1985, Condition: used, spindle diameter 110 mm x-travel 900 mm y-travel 600 mm z-axis 200 mm table length 1020 mm table width 860 mm taper MK 40 Table size, approx. 1,020 x 860 mm Max. weight of workpiece 800 kg Dsb Ey Uot Hwyxogijcg Table travel, longitudinal, max. (X) 900 mm Boring head travel, cross, max. (Y) 600 mm Boring spindle stroke (Z) 200 mm Vertical travel of cross beam (W) 635 mm Vertical distance between table and boring spindle 15 - 850 mm Distance between columns 950 mm Spindle Ø 110 mm Spindle taper internal/external ISO 40 18 spindle speeds 10 - 2,500 rpm Milling feeds of table, infinitely variable 1 - 6,000 mm/min 4 milling feeds of boring head 30 - 180 mm/min 6 boring feeds 0.01 - 0.39 rpm Accuracy of all 3 axes when the machine was new 0.003 mm Quick feeds for table, boring head slide, and boring spindle, max. 6,000 mm/min Spindle drive 6.2 kW Weight, approx. 9,000 kg Total electrical load 15 kW - 380 V - 50 Hz Accessories / Special Features - BOSCH CNC Control, Model MICRO 8, in 3 axes, with monitor. Program input is either manual or via cassette, or via interface entry. - Digital display for Z Axis. - Separate switch cabinet. - Various tools. - Oil cooler for spindle lubrication.

Condition: good (used), Year of construction: 2004, TBT ML 200-2-800 deep hole drilling machine TECHNICAL DATA Type: ML 200-2-800 Year of construction: 2004 Control: Simatic OP17 Number of spindles: 2 Spindle distance: 12 mm Drilling slide stroke: 800 mm Drilling range: 1 - 10 mm Process: Single-lip drill Drilling depth: Immersion spindle: 110 mm Seal housing: 430 mm Sealing housing with steady rest: 400 mm Spindle drive: Dcsb Eovcbg Sey Ugiog Power: 1.7 / 2.9 / 1.3 Voltage: 240 / 350 / 350 V Frequency: 100 - 800 Hz Weight: Approx. 2.6 T We assume no liability for the accuracy, completeness and up-to-dateness of the information provided

Year of construction: 1962, Condition: used, machine/vehicle number: 7595, Article number: MA992 Manufacturer: Bluthard Type: 4BA Year of construction: 1962 Machine number: 7595 Length [mm]: 900 Width [mm]: 520 Height [mm]: 2400 Weight [kg]: 590 Power supply: 380V Automatically feed: Yes Djb Ey Ugjc Ti Nteiscg Gear [RPM]: 56-1120 Mount MT: 3 Left/right rotation: Yes Coolant system: Yes Accessories: Vice Machine data: Thread cutting device Coolant system Intermediate table

Condition: used, Year of construction: 1974, bore capacity in steel (diameter) ca. 40 mm throat 300 mm bore stroke 160 mm drive capacity - spindle motor 1,5 kW spindle taper MT Schnellwechsel/Quick chan column diameter 180 mm table surface area 300 x 400 mm distance spindle /table 680 mm distance spindle/base plate 1070 mm dimensions 0,7 x 0,45 x 1,85 m range L-W-H 1,0 x 0,5 x 2,32 m Dob Ey Ujtrhf Hogijcg weight of the machine ca. 0,65 t Heavy Pillar Drilling Machine. - spindle left/right - Manual tapping (manual change direction of rotation) - autom. feed with Depth gauge - coolant system - height adjustable head - hight adjustable table - quick change tool system

Condition: used, throat - mm tool adaptor siehe Fotos power requirement 0 kW internal diameter ca. 240 mm max. pitch circle ca. 200 mm total power requirement 0 kW Shipping weight 230 kg Packing ca. 800 x 500 x 400 mm Multi-spindle drill head Drilling bell Dsb Ey Usum Hqaegijcg incl. a total of 34 drilling plates

Condition: excellent (used), Year of construction: 2001, Functionality: fully functional, High-precision drilling and milling machine Dsb Ey Usukf Ncjgiocg Fehlmann model Picomax 54 Heidenhain TNC 310 very good condition Technical Data: >> Year of construction: 2001 >> Travel X/Y/Z 500/ 250/ 160 mm >> Travel distance W 480 mm >> Clamping surface (L x W) 885 x 320 mm >> Permissible table load 250 kg >> Distance table - spindle nose 0 - 605 mm >> Feed speed X/Y 1 - 2000 mm/min >> Feed speed Z 1 - 1200 mm/min >> Tool quick-change system SF 32 >> Speed range infinitely variable 9200 rpm >> Drive power 5 kW >> Space requirement (W x D x H) 1850 x 2550 x 2400 mm About the machine : We offer a high-precision drilling and milling machine Fehlmann model Picomax 54 in very good condition. It has a Heidenhain TNC 310 contouring control. The program creation in the user-friendly Heidenhain plain text dialog is particularly easy. HEIDENHAIN TNCs are workshop-oriented contouring controls with which you can program conventional milling and drilling operations directly on the machine in easy-to-understand plain-language dialog. The machine runs very smoothly at maximum speeds. Mechanically and electrically tested. Take the opportunity to view and try out this machine under power on site.

Condition: used, Year of construction: 1984, cycle time 0 sec total power requirement 2,5 kW weight of the machine ca. 1 t dimensions of the machine ca. m P O S A L U X (Switzerland) Horizontal 3-Spindle Fine Boring Machines Model MICROFOR PNC 3 Year 1984 Serial Nos. 6.8230/9 Boring Æ 0.15 - 2 mm Spindle stroke 0 - 18 mm Working stroke, max. 0 - 12 mm Quick feed 60 mm/sec Boring feed 0 - 5 mm/sec Dcjb Eet Hwvgoy Ugieg Spindle speeds 3,500 - 11,500 rpm Distance between spindles, vertical, approx. 80 mm Table speeds (for deburring) approx. 100 rpm Table Æ, approx. 100 mm Table bore, approx. 70 mm Table slide swivelling device, approx. 60 °/sec Swivelling range 0 - 100 ° Total drive, approx. 2.5 kW Weight 1,000 kg Accessories / Special Features Serial No. 6.8230/9 Machine is equipped with a modern POSALUX SELECTRON Control with keyboard and LED for direct programming on the machine (in principle the same as with a punchboard control). With setting microscope and machine lamp.

Condition: good (used), Year of construction: 1997, TBT ML 200-2-850 deep hole drilling machine TECHNICAL DATA Type: M200-2-850 Number of spindles: 2 Drill carriage stroke: 850 mm Dceb Ey Ugsvca Rcsijg Drilling method: Single-lip drilling Drilling depth with: Submersible spindle: 120 mm Sealing housing: 400 mm Sealing housing with bezel: 350 mm Spindle drive Power: 2 / 3.5 / 1.5 kW Voltage: 140 / 350 / 350 V Speed: 14 / 11 / 6 / A Feed - own drive Feed speed: 20 - 500 mm/min Rapid traverse speed NC operation: 12 m/min Feed force: 1.5 kN Motor power: 2.2 Nm at 3000 rpm Clamping tailstock Motor power: 0.75 kW at 1000 rpm Spindle speed: 500 rpm Stroke max: 200 mm Main dimensions L x W x H: 4600 x 2500 x 2100 mm Transport weight: 3200 kg Control: Sinumerik 805 M No liability is assumed for the correctness, completeness and up-to-dateness of the information provided

Condition: excellent (used), Drilling capacity -20 mm Spindle taper FEHLMANN Spindle speeds 50-6300 rpm Throat 276 mm Cross table 530 x 255 mm Digital read-out Dcob Ey Uouy Sazegieg Accessories MARCELS MASCHINEN CH

Condition: used, Year of construction: 1990, bore capacity in steel (diameter) 4 / 6 mm turning speeds 650 - 12.000 U/min table surface area 180 * 160 mm Debjt Azccs Ey Ugiscg spindle cone B 10 bore stroke 50 mm total power requirement ? kW weight of the machine ca. 50 kg dimensions of the machine ca. - m

Condition: used, Year of construction: 1985, core drilling diameter max. 18 mm bore depth 320 mm Deb Eyjt Hwvae Ugiscg swing diameter mm total power requirement 33 kW weight of the machine ca. 6 t dimensions of the machine ca. m

Condition: ready for operation (used), Spindle taper Aciera Drilling capacity in steel 22 mm Throat 270 mm Table size 700 x 370 mm Spindle speeds , inf. variable 40-3'600 rpm Deb Ey Ugsuy R T Tsiecg MARCELS MASCHINEN CH

Condition: used, spindle cone MK 1 turning speeds 200 - 3000 U/min Dob Ejt Dcxnoy Ugijcg table-size 300 x 220 mm total power requirement 520 W weight of the machine ca. 200 kg dimensions of the machine ca. 800*400*1800 mm

Condition: used, Year of construction: 1965, core drilling diameter max. 50 mm bore depth 2000 mm swing diameter mm drilling capacity diameter max. 110 mm total power requirement 30 kW weight of the machine ca. 10 t Drilling Ø, approx. 2 - 50 mm Boring Ø, approx. 100 mm Drilling depth, max. (see stroke / mounting length) 1,600 - 2,000 mm Stroke of drilling slide, approx. 4,000 mm Distance between the two spindle heads 5,000 mm Height of centres above guideways 350 / 450 mm Drilling feed of drilling slide, infinitely variable 20 - 200 mm/min Quick feed of drilling slide 2,500 mm/min Spindle speeds via belt disks 260 - 650 / 650 - 1,625 rpm Dob Ey Uget Hwucoiocg Workspindle drive 24 kW Drive of coolant pumps 1 x 7.5/15 kW and 1 x 15/28 kW Total electrical load, approx. 60 kW - 380 V - 50 Hz Total length of machine / guideways 7,500 / 5,000 mm Weight, approx. 10,000 kg Accessories / Special Features * Machine consists of the following elements: Main spindle on the left-hand side, followed by the coolant oil supply device. Table group, driven by ball screw spindle. Coolant oil supply device with elevated height of centres. At the end is a headstock, Type B 16, with drive motor approx. 7.5 kW, n = 900/2400 and 2400/6000. Large coolant device with filter unit. Large selection of accessories and drilling tools with Ø up to 100 mm. * Machine is suitable for working with a rotating workpiece together with a fixed drilling tool (ELB and BTA Process), as well as for a fixed workpiece and a rotating drilling tool. It can work with internal oil feed (Elb) or with external oil feed (BTA). * Complete oil coolant unit with tank and filter and two SIG high pressure pumps. Number of litres can be set: 17 / 40 / 120 or 220 / 500 litres per minute. Capacity approx. 2,500 l. * Feed of main slide is via ball screw spindle and infinitely variable DC motor. Mounted on the main slide is at present a table, approx. 800 x 800 mm, cross-adjustable approx. 500 mm, and suitable for holding cubic and cylindrical workpieces. Electric control via cam rail, approx. 2,500 mm long. End switch for quick feed, feed and return. * 2 closed 3-point steady rests. * FORKHARDT 3-Jaw Chuck, manually operated, Ø approx. 315 mm. * Modernized control panel with speed display, feed setting and display, display for kW, switch for feed, quick feed, right/left, etc. * 2 separate switch cabinets, separate coolant oil display device, bushes, reducers, clamping helps and lots of other accessories. This is a very valuable machine because of all the accessories!

Condition: used, Year of construction: 1991, spindle diameter 95 mm x-travel 650 mm distance between columns 750 mm Control TNC 426 / 430 Dcobsulntyj Ey Ugieg total power requirement 5 kW weight of the machine ca. 5 t dimensions of the machine ca. 4,5 x 3 x 3 m No. 5265 CNC coordinate boring machine SIP - Hauser MP 44 Working area: 650 x 450 x 500 + 160 Drive: 5 kW Control: TNC 426 / 430 Table 730 x 630 mm Electronic handwheel documentation Spindle SK 40 Speed range approx. 25 - 4,000 min-1 RETROFIT with TNC 426/430 in 2004 3600 switch-on hours / 900 program hours Space requirement approx. 4.5 x 3 x 3 m Transport dimensions approx. 4 loading meters / height 2.60 m Weight approx. 4.5-5 tons

Condition: used, Year of construction: 1973, spindle diameter 130 mm x-travel 3000 mm y-travel 2000 mm total power requirement 4,5 kW weight of the machine ca. 30 t Spindle Ø 130 mm Spindle taper SK 50 Working range: X = column, longitudinal 3,000 mm Y = headstock, vertical 2,000 mm Z = spindle stroke 1,000 mm Lower table 3,300 x 2.400 mm Max. weight on table 10 tons/m² Min./ max position of work spindle above table 770 / 2,770 mm Feeds 0.9 - 2,000 mm/min Quick feed for headstock and column 5,000 mm/min Quill feed 0.5 - 1,200 mm/min Speed range, partially infinitely variable 4.5 - 1,250 rpm Weight, approx. 30,000 kg Accessories / Special Features * HEIDENHAIN Digital Display for 3 axes. * Hardened guideways. * Ball screw spindles. * Infinitely variable spindle speeds and feeds. Feeds can be individually driven with motor. * Moving operating platform. * Hanging control panel. * Manual operating control. Dcjbet Hwt Sj Ey Ugijg * Platform. * Hydrostatics in the column displacement. * Mounting plate 3,200 x 2,500 mm, planed, with t-slots. * Top table approx. 1,400 x 2,600 x height 900 mm, one face is handled. * Hydraulic clamping of column and slides. * Motor driven tool clamp. * Lots of accessories, including tool holders with and without tools, separate chip extractor, clamping aids, 1 angle plate, and other plates. Lots of other accessories. This is a strong machine which is very suitable for heavy cuts and therefore ideal for the machine tool industry and for tool manufacturers. Condition : Good. Machine can soon be inspected under power. Delivery : Ex stock as inspected Payment : Net, after conclusion of contract Thank you for your interest. We have other horizontal borers on stock. Please let us know what you need.

Condition: used, Year of construction: 2000, spindle diameter - mm x-travel 1250 mm y-travel 630 mm Control Heidenhain TNC 426 / 430 total power requirement 48 kW weight of the machine ca. 12 t dimensions of the machine ca. ca. 5 x 6 x 4 m m CNC jig boring machine / vertical machining centre overhauled in 2000 Spindle ISO 50, speed range 30-3000 min-1 max. torque 522 Nm feeds 3-2000 mm, rapid traverse 10 m/min max. distance spindle nose - table surface 725 mm Projection spindle centre - stand 800 mm. Space requirement approx. 5 x 5 m, Weight approx. 12 tonnes The machine was completely overhauled and modernised in 2000 with digital drives and drives and Heidenhain control Fixed table 1200 x 710 36-fold tool changer, coolant system, the pictured magnetic clamping table is not included in the scope of delivery ! - Dcjb Ejug I Rmoy Ugisg Working area: 1250 x 630 x 560 Drive: 44 kW Control: Heidenhain TNC 426 PB

Condition: used, Year of construction: 1978, spindle diameter 105 mm x-travel 1250 mm Dcjb Ey Ust Hwtxegijg y-travel 1000 mm z-travel 600 mm table length 1100 mm table width 900 mm tool adaptor 50 ISO / MK total power requirement kW weight of the machine ca. t CNC Table Borer, Reconditioned 2002, BOSCH CC 300

Year of construction: 1980, Condition: used, table length 2000 mm table width 1800 mm table load 12,5 t total power requirement 10 kW weight of the machine ca. 7,5 t Djbot Hwq Rs Ey Ugiocg dimensions of the machine ca. m Table size approx. 2,000 x 1,800 mm Max. weight of workpiece, approx. 12,500 kg Table travel, longitudinal 1,250 mm Table height above floor 920 mm Longitudinal feed 0.63 - 2,000 mm/min Turning feed, with Ø 1,000 mm 1 - 3,150 mm/min Longitudinal quick feed 2,000 mm/min Turning quick feed, with Ø 1,000 mm 3,150 mm/min Weight of machine 7,500 kg External dimensions of machine 3,700 x 2,100 x 920 mm Total electrical load 10 KW - 180 V - 50 Hz Accessories / Special Features * Telescopic covers for the guides. * Infinitely variable table feed. * Optical display for setting and reading the longitudinal adjustment. * Optical display for setting and reading the angle. Condition : Satisfactory to good. Machine can be inspected under power. Delivery : Ex stock as inspected Payment : Net, after conclusion of contract Thank you for your interest.