Condition: ready for operation (used), Year of construction: 2018, functionality: fully functional, machine/vehicle number: 18421, total length: 5,370 mm, total height: 1,600 mm, total width: 1,020 mm, Equipment: CE marking, MACHINE DETAILS Dimensions (L x W x H): 5,370 mm x 1,020 mm x 1,600 mm (l x w x h) Transport packages: 1 unit Gsdpfx Ahsx Ahhfo Douk EQUIPMENT CE marking

Condition: ready for operation (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: 36956, total length: 9,800 mm, workpiece height (max.): 60 mm, edge thickness (max.): 3 mm, overall weight: 600 kg, plate height: 1,060 mm, TECHNICAL DETAILS Workpiece height: 60 mm Edge thickness: up to 3 mm Minimum panel width: 55 mm Minimum panel length: 100 mm Panel height: 1,060 mm Tool interface: ISO 30 MACHINE DETAILS Dimensions & weight Total length: 9,800 mm Weight: 600 kg Input frequency: 50 Hz EQUIPMENT Return system Operates with PUR adhesive Spray system Pre-milling unit RT 20 Gluing unit SP 20 6-position edge magazine Gedpfxsx A Tzqs Ah Deuk End trimming unit IT 90-S Rough milling unit RS 10 Fine trimming unit RF 40 Note: Further information regarding equipment can be found on the attached machine data sheet.

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, workpiece height (max.): 60 mm, edge thickness (max.): 20 mm, workpiece width (max.): 60 mm, The machine has been serviced and is in excellent condition. It is immediately ready for operation! TECHNICAL DETAILS - Edge thickness (glued): max. 20 mm - Maximum gluing height: 60 mm - Maximum roll material thickness: 3 mm - Piece width: min. 60 mm - Maximum feed rate: up to 25 m/min - Feed: continuous - Electric height adjustment: available - Pressure system: upper belt pressure - Preheating zone: available - Granulate glue system: with pre-fabricated container - Glue pot: interchangeable/variable - Spray unit: available - Pre-milling unit: available - Trimming unit: with 2 motors - Milling stations: flush/radial/chamfer, 1 available - Corner rounding unit: with 2 motors - Edge scraper: profile and planer - Buffing unit: available - Strip magazine: available - Units: synchronized units with NC axis/axes Gujdpfx Ahexzfwbe Dsk - Machine version: left hand side - Quick-change units: available MACHINE DETAILS - Remote control: PowerControl PC 22 - Weight: 5,000 kg - Machine length: 7,845 mm - Standards: CE requirements EQUIPMENT - Special equipment: with nesting - New chains - HOMAG feed device with 2 rollers - HOMAG A 20 glue unit - HOMAG HL 84 - HOMAG FK 11 - HOMAG PN 10 profile pull scrape unit - HOMAG FA 11 finishing unit

Condition: ready for operation (used), Year of construction: 2005, General Data Machine weight 2600 kg Measurements height 2300 mm Dimensions Machine Length 6060 mm This BRANDT OPTIMAT KDF 670 edgebander was manufactured in 2005. It features a comprehensive range of processing units including pre-milling, glue application, edge feeding and cutting, and polishing. Capable of handling workpiece thicknesses from 8 to 60 mm and edge bands up to 15 mm. Feed speed reaches up to 20 m/min, optimizing productivity. Consider the opportunity to buy this BRANDT OPTIMAT KDF 670 edgebander. Contact us for more information about this machine. Gsdpfxjx E Eggo Ah Djuk Application Types Edge Banding

Condition: excellent (used), CATALOG NUMBER 7729 TECHNICAL DATA Equipment: - Tape holder - Glue tank (granulate) - Tape feeder - Guillotine – pre-cutting the edging - Pressure rollers 2 pcs - Min. width of processed components: 50mm - Thickness of processed components: 10-40mm - Min. internal radius: 50mm - Angled gluing with 1mm thick edging, 0-45° - Edge thickness: 0.3-3mm - Electric feed - Total power: 2kW - Compressed air pressure: 6-7 bar Gedpfx Aexaprgsh Dsuk - Dimensions (L/W/H): 1700x1300x1550mm - Weight: 310kg ADVANTAGES – Made in Poland – Unpainted – DTR technical documentation – Very good condition – used edge banding machine Net price: PLN 6500 Net price: EUR 1550 (exchange rate: 4.2 EUR) (Prices may vary depending on larger fluctuations)

Condition: like new (used), Year of construction: 2023, Edge Banding Machine SCM Model Olympic 500 HP 'T-ER2' Gjdpfsq A Tyzox Ah Deuk Offer type: LEASE RETURN, Used machine Availability: Immediate Location: In stock Condition: As new Year of manufacture: 2023 GENERAL: A comprehensive and versatile edge banding machine designed for small and medium-sized enterprises, capable of processing a wide range of materials to a high-quality standard within a compact footprint. The SCM Olympic 500 features an electronic adjustment system and enables the machining of 2 radii, each with its own tooling, for workpieces with a minimum width of 60 mm. HIGHLIGHTS: • Large touchscreen control panel with “Maestro active edge” software for human-machine interface (HMI) • Maestro connect: prepared for later installation, no gateway required • 2-radius processing, chamfering at all units with multi-edge tooling - Fine trimming and radiusing unit, radius = 1 mm - Fine trimming and radiusing unit, radius = 2 mm • Electronic positioning of the pressure beam OPTIONAL MACHINE EQUIPMENT: Workpiece spacer at infeed KIT “SAV€NERGY” Interior lighting for the enclosure and edge banding area “Nesting” pressure roller kit Release agent spray unit “AAR” Finishing spray unit for edge processing Spray unit for sensitive edges Jointing cutter unit “RT-V1” “EASY SIZE” device – electronic fast adjustment of the jointing cutter Glue unit “VC-VM” Ceramic lamp with infrared for pre-heating workpieces Electronic positioning of all pressure rollers End trimming unit “K-2 Radius” Chamfer and radius trimming unit “R-HP Multiedge 2R” Corner rounding unit “Round 2-A Multiedge 1R” KIT 'MULTIEDGE 3' with automatic position change straight/R/R for “Round 2-A Multiedge 1R” unit Radius scraper aggregate “RAS-HP Multiedge 2R” Flat scraper aggregate “RC-N” Buffing unit “SP-V” MACHINE LANGUAGE: German TECHNICAL DATA: Edge thickness: 0.4–6 mm Workpiece thickness: 8–60 mm Min. workpiece width: 60 mm Feed speed: 12 m/min Machine length: approx. 4950 mm SPECIAL PRICE FOR LEASE RETURN!!

Condition: used, machine/vehicle number: 008323, Type of edging: Thin edge, Thick edge, Solid wood Gluing System: EVA Hotmelt, PUR Premilling Unit: yes Corner Rounding Unit: yes Max feed speed: 20 m/min Gsdpfx Ahjx Hpkxo Djuk Maximum panel thickness: 60 mm Operating Units: 7 nr

Condition: used, Holz Her Sprint 1312 FÜ + PU Heavy-duty design – edge thickness 0.4 - 12 mm PLC screen control Pre-milling unit for application before the gluing section Fully automatic edge magazine for roll and strip material Glue application station for cartridges + PU bonding automatic tracing nozzle Workpiece height 6-55 mm Guedpfx Ahjx Eilqo Djk End trimming unit for roll and strip material up to 12 mm edge thickness with adjustment from 0-10° angle of the trimming saws Milling unit, flush milling up to 12 mm, radius milling – bevel milling - 15° motorised - 4 axes Scraper unit for bevels and radii with 2 pneumatically operated scraper holders pneumatic infeed and outfeed Flat scraper unit – finishing Spray device – PU Machine in TOP CONDITION Available from stock Lieboch

Condition: excellent (used), 4-SIDES LINE of Double-side Sizing and Edge Banding. Workpieces dimensions: min. mm 195 x 250 x 60 / max. mm 1200 x 2500 x 60 Composed of the following machines: Gjdpfx Asiztxyjh Douk KZ0400a) Infeed table "HOMAG" Mod. TBL 100/25/12/S with motorized rollers Adjustable feeding speed 7-40 m/min KZ0400b) 1st Double-side Sizing & Edge Bander "HOMAG" Mod. KFL 325/M1/C Adjustable feeding speed 15-40 m/min - with PC 22 SIZING: Double-Hogger KD10 (2 x Kw 6.6) + GLUEING: A3 with 2 reels BANDING: Overlapped Trimming BF10 (2 x Kw 0.55), NC controlled Fine Trimming PF20 (2 x Kw 0.4), Grooving Unit UF11 (Kw 4), Free space, Profile Scraper PN10, Finish (Glue Scraper + Buffing) KZ0400c) Turning Station "HOMAG" Mod. TDL 310 / 25 / 12 (from lengthwise to crosswise) Adjustable feeding speed 20-60 m/min KZ0400d) 2nd Double-side Sizing & Edge Bander "HOMAG" Mod. KFL 326/M2/C Adjustable feeding speed 15-32 m/min - with PC 22 SIZING: Anti-chipping (1xKw 4,5), Double-Hogger KD10 (2 x Kw 6.6) + GLUEING: A3 with 2 reels BANDING: End-trimming HL84 (2xKw 0.22), Overlapped Trimming BF10 (2 x Kw 0.55), NC controlled Fine Trimming PF20 (2 x Kw 0.4), Contour Trimming (Corner rounding) FF32 (4 x Kw 0.4), Free space, Profile Scraper PN10, Finish (Glue Scraper + Buffing) MINIMUM EDGE LENGTH 70 MM (Part thickness for narrow parts max. 25 mm, Edge thickness max. 2 mm, Cycle speed: max. 20 T/min, Feed rate max. 20 m/min.)

Condition: ready for operation (used), Year of construction: 2010, This BRANDT Highflex 1440 edgebander was manufactured in 2010. Ideal for precise edgebanding applications, it ensures consistent performance for a variety of woodworking tasks. Consider the opportunity to buy this BRANDT Highflex 1440 edgebander. Contact us for more information. Application Types Edge Banding Guodjx D Ht Nepfx Ah Dok

Condition: excellent (used), Catalogue number: 7531 TECHNICAL DATA Equipment: Gujdpfxsvtl Tqj Ah Dek - Disc - Tape feeder - Guillotine - Glue tank (granulate) - 3 pressure rollers - Trimming unit with final saws - 2 milling units for edge shaping (radius cutters) - 2 polishers Minimum length of workpiece: 140mm Minimum width of workpiece: 60mm Thickness of the edged workpiece: 10-55mm Edgebanding tape thickness: 0.4-3mm Extendable support from the table Motor power: 5.6kW Extraction port diameter: 120mm Dimensions (L/W/H): 3480x1050x1020mm Weight approx.: 900kg - Not repainted - Austrian manufacture - Year of production: 2007 - Condition: very good - Used edgebander Net price: 18,900 PLN Net price: 4,500 EUR Net price calculated with an exchange rate of 4.2 PLN/EUR (In the case of significant exchange rate fluctuations, the price may change)

Condition: good (used), Wood router bit, router head, router tool, wood router bit, profile router bit Guedpfxjb A Il Ee Ah Dsk -Outer diameter: 220 mm -Number: 2 milling cutters Price: complete -Weight: 14 kg

Condition: used, machine/vehicle number: 008325, Position 1: Single Edgebanders HOMAG-. Position 2: Panel Return Systems HOMAG-. Gsdpfx Ahox Hpklo Douk

Condition: used, Holz Her Triathlon 1488 FÜ + PU Heavy-duty design - edge thickness 0.4 - 25 mm SPS screen control Edge-Control Motor-driven, position-controlled height adjustment - belt bridge Automatic infeed fence Pre-milling unit for preparing the edge before the gluing station Fully automatic edge magazine for coil and strip material Glue application station for cartridges and PU gluing Glue application by nozzle technology Automatic glue height adjustment Workpiece height: 6-60 mm MOT pressure unit End trimming unit for coil and strip material up to 15 mm edge thickness, with pneumatic adjustment between 0-15° for the trimming saw inclination Milling units for flush trimming of coil and strip material for edge thicknesses from 0.4 - 20 mm Profile milling unit for longitudinal and end edge processing, working height 45 mm Scraper unit for chamfers and radii with 2 scraper holders, pneumatically switchable in and out Guedjxm Spbspfx Ah Dsk Flat scraper unit Usage-controlled buffing unit Automatic central lubrication for chain Electronically controlled spray system at infeed and outfeed The machine is IN WORKING CONDITION The machine is in use and can be inspected and demonstrated at any time at the seller’s location Offered on behalf of a customer Sold as inspected on site, without any warranty. NET €7,000.00

Condition: ready for operation (used), Year of construction: 2017, This FORMAT4 Tempora 60.08 edgebander was manufactured in 2017. It features a feed speed of 12 m/min with a chain feed system and can handle edge thicknesses from 0.4 to 8 mm. Designed for professional furniture manufacturing, it includes milling and scraper units for precise edge finishing and a heated glue pot for consistent adhesive application. Ideal for high-quality, reliable edgebanding performance. Contact us for more information. Guedpfx Ahex Eniwj Djk Application Types Edge Banding

Condition: good (used), Wood router bit, router head, router tool, wood router bit, profile router bit -Outer diameter: 170 mm Gujdpfx Aheb A Sqgs Djk -Number: 6 milling cutters -2x: left -4x: right Price: complete -Weight: 4.6 kg/piece

Condition: used, machine/vehicle number: 007818, Type of edging: Thin edge, Thick edge Gluing System: EVA Hotmelt Corner Rounding Unit: yes Combination Squaring Edgebanding Machine: First and Second Pass Max Panel Width: 3000 mm Guodowu Ab Tepfx Ah Dok Max feed speed: 40 m/min Operating Units Right Side: 12 nr Operating Units Left Side: 12 nr

Condition: ready for operation (used), Year of construction: 2002, This IMA Combima was manufactured in 2002. A robust double-sided edgebander, it features a working width of 235 to 2600 mm and a length range of 200 to 2600 mm. Capable of speeds from 10 to 40 m/min, it includes jointing milling, a semi-automatic gluing unit with a 6-piece edge magazine, and both straight and profile trimming units. Consider the opportunity to buy this IMA Combima double sided edgebander. Contact us for more information about this machine. Application Types Guedpfx Aex D Iq Noh Djk Edge Banding

Condition: ready for operation (used), Year of construction: 2022, Additional Equipment Control Panel: Smartouch 21" Control System: E-motion // control system with motorized adjustment (accuracy 0.01 mm) Gsdpfx Ahox D Idcj Djuk Chain Feed System: With automatic lubrication Top Pressure Beam: Motorized height adjustment Pre-milling Unit: 2 x 2.2 kW motors, diamond cutters, up to 3 mm removal Glue Application System: Compatible with EVA and PUR, fast heat-up (8 min) Additional Glue Tank: For fast glue change Edge Pressure Unit: 1 driven + 2 passive rollers, pneumatic control Trimming Unit: 2 motors (0.5 kW), adjustable 0–15° Multi-functional Trimming Unit: 2 motors, 0.75 kW, top and bottom Corner Rounding Unit: Edge thickness 0.4 – 3 mm, panel height 10 – 60 mm, 2 independent motors, 12000 rpm This FORMAT4 Tempora F800 60.12/2 E edgebander was manufactured in 2022. It features a Smartouch 21" control panel, E-motion control system, and a chain feed system with automatic lubrication. The machine includes a pre-milling unit with diamond cutters and a glue application system compatible with EVA and PUR. Consider the opportunity to buy this FORMAT4 Tempora F800 60.12/2 E edgebander. Contact us for more information. Application Types Edge Banding

Condition: ready for operation (used), Year of construction: 2007, General Data Measurements depth 7755 mm This HOMAG Optimat KAL 310 was manufactured in 2007. It features a left-hand version edgebander with a maximum workpiece thickness of 60 mm and a feed speed of up to 24 m/min. Equipped with a PU edge gluing system and PowerControl PC 22 unit, it spans 7755 mm in length and handles edge thickness up to 3 mm. Consider the opportunity to buy this HOMAG Optimat KAL 310 edgebander. Contact us for more information. Application Types Gusdpfsx D Nqwox Ah Dsk Edge Banding

Condition: ready for operation (used), Year of construction: 2010, operating hours: 19,714 h, Additional Equipment Jointing cutter Radiant heater EVA gluing unit Roll magazine for edge material Cutting unit Flush milling top/bottom MFA with 2 motors for radius r2, servo-controlled Profile scraper unit Surface scraper unit Buffing unit Gedpfjx D Szljx Ah Douk This IMA Advantage 550 was manufactured in 2010. A used single-sided edge bander featuring a jointing cutter, radiant heater, EVA gluing unit, and a roll magazine for edge material. It includes a cutting unit, flush milling top/bottom, and a profile scraper unit. The machine offers a feed speed of 20 m/min, ideal for efficient production. Consider the opportunity to buy this IMA Advantage 550 edgebander. Contact us for more information. Application Types Edge Banding

Condition: ready for operation (used), Year of construction: 2021, Additional Equipment Guodpjx D Rcbefx Ah Dsk Mobile Console with integrated PC"eye-M": 21.5" LCD color display through a 16/9 sized touch screen / AAR Anti-Adhesive Device: Positioned before panel edge trimming unit / Spray-Mist Device: Positioned for edge finishing and glue cooling / Loader for Narrow Pieces: Device to facilitate manual square loading of narrow pieces This SCM STEFANI MD edgebander was manufactured in 2021. It features a versatile automatic edge banding capability for solid wood up to 15 mm, with an option for 22 mm. The machine includes an "SGP" glue pot for both EVA and PUR glues, ensuring a perfect joint line. The "Startouch" control system offers a 12” touch-screen display, customizable working programs, and graphic simulation of machining. Ideal for high productivity with speeds up to 25 m/min. Contact us for more information. Application Types Edge Banding

Condition: ready for operation (used), Year of construction: 2010, This BRANDT Ambition 1660 FGC edgebander was manufactured in 2010. Ideal for precise edge finishing, it ensures consistent performance for woodworking projects. Consider the opportunity to buy this BRANDT Ambition 1660 FGC edgebander. Contact us for more information. Application Types Edge Banding Gjdpfxox D Rzwe Ah Deuk

Condition: ready for operation (used), Year of construction: 2013, Tools Godpfsx D Sp Ajx Ah Dsuk Max tool length 5760 mm Additional Equipment Joining Unit: 2 x 2.2 kW 200 Hz Gluing Unit: A12 Snipping Unit: Chamfer/Straight 2 x 0.35 kW Pneumatic Adjustment for Bevel/Straight Cross-Cuts Pneumatic 2-Point Adjustment for Cross-Cuts Pre-Milling Unit: 2 x 0.55 kW O degrees Pneumatic 2-Point Adjustment Multifunctional Shaping Unit: 2 x O, 4 kW Profile Scraper with Quick-Change Heads Pneumatic Adjustment Scraper Blade This BRANDT KDF 650 Highflex 1650 edgebander was manufactured in 2013. Ideal for precise edgebanding applications, it ensures reliable performance for woodworking professionals. Consider the opportunity to buy this BRANDT KDF 650 Highflex 1650 edgebander. Contact us for more information. Application Types Edge Banding

Condition: ready for operation (used), Year of construction: 2024, Additional Equipment Application unit with Teflon coating for 1.5 kg EVA granulate Upper and lower polishing unit This FORMAT4 TEMPORA 60.06 glueBox x-motion edgebander was manufactured in 2024. It features a turntable magazine with a diameter of 750 mm for edging material ranging from 0.4-3 mm, a GlueBox application unit, and upper and lower polishing units. The machine includes advanced x-motion Plus control with a 15' SmartTouch screen and a multifunctional milling unit for precise plastic edge machining. Contact us for more information about this machine. Gujdjx D Hbtjpfx Ah Dek Application Types Edge Banding