Condition: ready for operation (used), Year of construction: 2015, clamping force: 900 kN, controller manufacturer: ENGEL, controller model: cc300, This 4-axis Engel Victory 200/90 tech + Viper 6 RC300 was manufactured in 2015. It features a clamping force of 90 tonnes and an injection unit size of 200. The machine includes a central ejector system and a magnetic clamping system for enhanced efficiency. If you are looking to get high-quality injection moulding capabilities, consider the Engel Victory 200/90 tech + Viper 6 RC300 hydraulic injection moulding machine we have for sale. Contact us for further details. Bsdpfxj Af Tyzs Afgsww ENGEL Victory 200/90 tech- Clamping Force: 90 tonnes - Injection Unit Size: 200 - Total Operating Hours (Machine): 15,903 h - Operating Hours in Automatic (Robot): 12,086 h - Clamping Platen Execution: Tie-bar-less standard platen according to EUROMAP - Centring Diameter: 125 mm EUROMAP - Magnetic Clamping System: Stäubli magnetic clamping plate - Ejector System: Central ejector with ejector safety interface - Heating System: 230 V ceramic cylinder heating bands ENGEL Viper 6 RC300- Maximum Manipulation Weight (Payload): 5 kg- Robot Axis Strokes: X-Stroke: 400 mm Y-Stroke (Single): 1,000 mm Z-Stroke: 2,360 mm C-Axis: Compact pneumatic rotary axis, 0–90° pivot, torque 6 Nm- Minimum Deposit Height: 1450 mm (center of unswiveled C-axis, without gripper head and part) - Max. Vertical Part / Gripper Head Size (TV): 200 mm - Maximum Total System Height: 4100 mm (handling and machine incl. machine shoes) - Part Deposit Side: Machine rear side - Entry Movement: Vertical

Condition: excellent (used), Year of construction: 2011, KRAUSSMAFFEI KM 850-12000 MX injection molding machine Year of manufacture: 2011 Clamping force: 8,500 kN (850 tons) Control system: MC5 Robot: KraussMaffei LRX 500 TECHNICAL SPECIFICATIONS 1. Clamping unit - Clamping system: hydraulic-mechanical, two-platen - Design: 4 pressure pads and 4 locking units on the moving platen - Clamping force: 8,500 kN (850 tons) - Opening force: 560 kN - Column spacing (H × V): 1,140 × 1,140 mm - Dimensions of mounting platens: 1,600 × 1,600 mm - Opening stroke: 1,600 mm - Minimum mold height: 500 mm - Maximum mold height: 1,100 mm - Maximum die opening: 2,100 mm - Ejector stroke: 300 mm - Ejector force: 200 / 100 kN 2. Plastification unit - Complete plastification unit for thermoplastics - Screw diameter: 135 mm - Backflow valve: yes - Nozzle type: open - Nozzle radius: 25 mm - Nozzle orifice diameter: 9 mm 3. Injection unit - Injection unit type: 12000 - Injection unit adjustment: PV Bwjdpfe Af H Imsx Afgow - Screw diameter: 135 mm - Injection volume: 8,588 cm³ - Injection shot weight (PS): 6,098 g - Maximum injection pressure: 1,389 bar - Injection rate: 1,414 cm³/s 4. Hydraulic and drive system - Rated motor power: 132 kW - Hydraulic oil tank capacity: 2,440 l - Cycle time according to EUROMAP 6: 965 cycles/h 5. Control system - Control system: KraussMaffei MC5 - Color operator monitor - Integrated control panel - USB port for data carrier operation 6. KraussMaffei LRX 500 linear robot - Manufacturer: KraussMaffei - Model: LRX 500 - Type: linear robot - Z-axis: 4,000 mm - X-axis: 1,500 mm - Y-axis: 1,250 / 1,250 mm 7. Machine dimensions and weight - Length: 11,720 mm - Width: 2,920 mm - Height: 2,710 mm - Net weight including control cabinet: approximately 49,000 kg (49 tons) Additional equipment - KraussMaffei LRX 500 linear robot - Two-platen hydraulic-mechanical clamping system - MC5 control system - PV adjustment of the injection unit - Plastification unit for thermoplastics with a 135 mm screw

Condition: ready for operation (used), Year of construction: 2015, operating hours: 29,446 h, clamping force: 2,600 kN, screw diameter: 60 mm, overall weight: 22,300 kg, controller manufacturer: ENGEL, controller model: CC300, product length (max.): 8,780 mm, Electrical injection moulding machine manufactured in 2015. This Engel e-victory 1640/260 features a clamping force of 2600 kN and an injection unit of 1640. It includes a tiebarless clamping system and a servo-electric injection system for high efficiency. If you are looking to get high-quality injection moulding capabilities, consider the Engel e-victory 1640/260 machine we have for sale. Contact us for further details. • Max swept volume cm³ 792 • Screw speed max r/min 250 • Injection rate cm³/s 765 • Spec. Injection pressure bar 2330 • Injection unit: 1640 • Injection system: Servo-electric, high execution • L/D ratio: 24 • Clamping system: Tiebarless ENGEL clamping system • Control unit: ENGEL CC300 (21.5" Full HD touchscreen) • Hydraulics: ECODRIVE SHV1 (1 demand-regulated servo pump) • Electrical connection: 3 x 400 V + N + PE, 50 Hz Bwedpfx Afsz Dgrpogow • Nominal connected load: approx. 164 kW • Centering: 160 mm • Hydraulic core pulls: 2 on moving platen, 2 on stationary platen • Vacuum/compressed air circuits: 8 on stationary platen with Venturi nozzles and pressure switches • Pneumatic mold valve control: 2-fold FESTO, up to 16 bar • Mold heating: 16 control zones, max heating power 25 kW • Nozzle radius: 15 mm • Nozzle bore: 4 mm • Nozzle contact stroke: approx. 405 mm • Hydraulic tank capacity: Main tank approx. 490 l, suction tank approx. 220 l • Robot interface: Euromap 67 / AN-146 • Additional equipment • MuCell package: • Complete MuCell Basic Package • PM cold-work steel screw Ø 60 mm • Hydraulic needle shut-off nozzle • Melt pressure sensor • Trexel auxiliary equipment: SII VC 30, MIK 1060 SII • Frame for two 50 L gas cylinders • Mold temperature control: 3 ENGEL flomo distributors (24 monitored circuits total) • Including GEKU robot

Condition: used, Year of construction: 2019, Sumitomo (SHI) Demag EL-EXIS SP 1000/1195-6300 Injection Moulding Machine General Information Manufacturer: Sumitomo (SHI) Demag Model: EL-EXIS SP 1000/1195-6300 Year of Manufacture: 2019 Country of Origin: Germany CE Marked: Yes Availability: Immediately available Location: Belgium ----- Technical Specifications Clamping Force: 10,000 kN (1,000 tonnes) Screw Diameter: 119.5 mm Injection Unit: 6300 International Size: 10000 / 6300 Control System: NC5 Plus / C-Dias Machine Weight: 67,600 kg Maximum Operating Pressure: 210 bar Power Supply: 3 × 400 V / 50 Hz Connected Load: 204 kVA Rated Current: 552 A ----- Operating Hours PLC / SPS Hours: 37,916.5 hours Drive Hours: 25,326.0 hours Heating Hours: 29,982.7 hours ----- Description Well-maintained Sumitomo (SHI) Demag EL-EXIS SP 1000/1195-6300 all-electric high-performance injection moulding machine built in 2019. The EL-EXIS series is specifically designed for applications requiring exceptional productivity, fast cycle times, high precision and reduced energy consumption. It is particularly suitable for packaging applications, thin-wall products and technical mouldings. The machine is equipped with the advanced NC5 Plus / C-Dias control system and remains in very good operating condition. Inspection under power can be arranged by appointment. Please Note: The information was obtained to the best of our abilities and - where possible - from the manufacturers. It is given in good faith, however, its accuracy cannot be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. Specific tooling must be requested before purchasing because in most cases the offered machines are still in production when the pictures were taken. We advise you to check any vital details! Manufacturer: Sumitomo (SHI) Demag Bjdpfe Afbz Ujx Afgoww Model: EL-EXIS SP 1000/1195-6300 Year of Manufacture: 2019 Availability: Immediately available Location: Belgium Clamping Force: 10,000 kN (1,000 tonnes) Screw Diameter: 119.5 mm Injection Unit: 6300 International Size: 10000 / 6300 Machine Weight: 67,600 kg PLC / SPS Hours: 37,916.5 hours Drive Hours: 25,326.0 hours Maximum Operating Pressure: 210 bar

Condition: new, Year of construction: 2024, functionality: fully functional, machine/vehicle number: 61037303, clamping force: 1,600 kN, screw diameter: 55 mm, displacement volume: 475 cm³, injection pressure: 1,564 bar, injection weight: 432 g, mold height (min.): 500 mm, ejector force: 3,300 N, ejector stroke: 175 mm, opening stroke: 750 mm, installation height: 400 mm, total length: 6,100 mm, total width: 1,710 mm, total height: 1,950 mm, overall weight: 8,400 kg, heating capacity: 8.9 kW (12.10 HP), drive type: Vollelektrisch, clear span: 520 mm, tool weight: 14,000 g, Injection molding machines directly from the manufacturer! As the manufacturer, KraussMaffei offers you our tested and versatile machines in stock: The fully electric PX series is the answer to your demands for greater flexibility combined with increasing productivity. Robust mechanics, highly precise and dynamic drive technologies, and intelligent energy management make the PX a reliable, productive, and efficient workhorse in any injection molding operation. An ergonomically optimized working height, maximum clearance under the mold, and excellent accessibility ensure maximum operator convenience. The PX series stands out due to its flexibility throughout its entire service life. TECHNICAL DATA: KM 160 / 750 PX G02 (Order 38621981) CONTROL  MC6 with 21.5" TFT color touchscreen and multi-touch function CLAMPING UNIT Bwodpfx Afo Afdategjw  Clamping force kN 1600  Mold opening force, max kN 240  Mold opening (h x v) mm 520 x 470  Platen size (h x v) mm 710 x 660  Mold height min. - max. mm 200 – 500  Opening stroke mm 850  Max. mold opening stroke mm 450  Ejector drive Hydraulic  Ejector stroke mm 175  Ejector force forward/backward kN 33 / 16  Ejector speed forward/backward mm/s 350 / 350  Max. mold weight kg 1400 INJECTION UNIT  Screw diameter / type mm 55 / Standard  Effective L/D ratio 21.3  Injection pressure bar 1564  Injection volume cm³ 475  Shot weight at max. stroke for PS g 432  Injection speed mm/s 125  Injection flow rate cm³/s 297  Screw drive / speed 1/min 267  Plasticizing rate (standard screw)4) g/s 75.8  Nozzle clamping force kN 42 ELECTRICAL PARAMETERS  Connected load kW 42  Installed heating power kW 18  Power supply V / Hz 415 / 50 WEIGHT AND DIMENSIONS  Net weight with control cabinet t 8.4  Length x width x height m 6.1 x 1.71 x 1.95 ADDITIONAL EQUIPMENT  Increased mold opening  Hydraulic core pull 1+1 - way  Pneumatic core pull 1+1 - way  Air valves 1+1 - way  Pneumatic cascade 4 - way  Euromap interfaces E18, E67, E77  Adaptive Process Control (APC) The machine is located in our factory in Parsdorf and is available for immediate delivery. Additional options can be offered upon request. We look forward to your inquiry.

Condition: good (used), Year of construction: 2011, operating hours: 45,087 h, SUMITOMO shi-Demag Systec 60/420-200 Clamping force 60 tons Year of manufacture 2011 Bjdpfo Agpc Rjx Afgsww Control system CDAIS Stroke 30 mm Displacement 106 cm³ Mold dimensions 420 x 420 Installation height 260 mm Operating hours 45,087

Condition: like new (used), Year of construction: 2017, operating hours: 12,500 h, functionality: fully functional, 1,0 St. gebr. Zweikomponenten Spritzgießmaschine Hersteller: ARBURG Typ: 720A3200-800/70 Baujahr: 2017 Schließkraft: 320 Tonnen Holmabstand 720 x 720 mm Einbauhöhe min. /max.: 300 - 800 mm Öffnungsweg: 600 mm Schnecken DN 1: 50 mm Max. Hubvolumen: 392 cm³ Spritzteilgewicht in PS: 359 g Bwjdpfov S E Dgsx Afgow Schnecke DN 2: 22 mm Max. Hubvolumen: 34 cm³ Spritzteilgewicht in PS: 31 g Steuerung: Selogica Technische Ausstattung anfordern.

Condition: good (used), Year of construction: 1999, clamping force: 3,000 kN, Manufacturer: KraussMaffei Model: KM 300-1400 C2 Machine type: Hydraulic injection molding machine Year of manufacture: 1999 Clamping force: 3000 kN International size designation: KM 1400 C2 / 300 Machine weight: 12,500 kg CE marking: present 2 units available WITHOUT LINEAR ROBOT! Further information available upon request. Bwsdpfx Aoytnnzjfgjw

Condition: excellent (used), Year of construction: 2016, operating hours: 33,921 h, functionality: fully functional, ENGEL Duo 1350H/330W/600WP combination machine including robot Year of manufacture: 2016 Operating hours: 33921 h Clamping unit Clamping force: 600 t Opening stroke: 1400 mm Tool mounting height: 450 - 1080 mm Maximum mold parting line distance: 1850 mm Mold size (h x v): 1115 x 975 mm Injection unit Screw diameter: 55 and 35 mm Injection volume: 618 + 154 cm³ Injection weight PS: 590 + 151 g Injection pressure: 2183 + 1600 bar Equipment: - Interface for rotary table/index plates - Core pull system, 2-way fixed mounting plate - Core pull system, 4-way movable mounting plate - Tool heating, 40 control circuits - Microcomputer CC200 Robot Engel Viper 40 RC300 - Max. handling weight: 23 kg - Z-axis: 4280 mm - X-axis: 1200 mm - Y-axis: 1500 mm - C-axis compact drive M - A-axis compact drive M - 8 additional compressed air circuits Bwjdpsz Nkavjfx Afgow - 6 additional vacuum circuits

Condition: ready for operation (used), Year of construction: 2021, clamping force: 2,700 kN, overall weight: 10,700 kg, Vertical injection moulding machine manufactured in 2021. This Kloeckner Desma D 969.250 Z (S3) features a clamping force of 2700 kN and an injection volume of 500 cm³. The machine is equipped with a high-pressure injection unit and a touch-operated control system for process monitoring. If you are looking to get high-quality injection moulding capabilities, consider the Kloeckner Desma D 969.250 Z (S3) machine we have for sale. Contact us for further details. Bwsdpj Ad Inlofx Afgjw - Clamping Force: 2700 kN (300 US tons)- Injection Volume: 500 cm³- Injection Unit Type: B500HP (High Pressure)- Injection Pressure: 3500 bar- Nozzle Contact Force: 58 kN- Control System: 2030 TBM (Touch operation / process monitoring)- Operating System Status: Active 3,360 hours- Operating Hours (Hydraulic Motor): approx. 730 hours- Operating Hours (Hydraulic Pump - Clamping Force): 65 hours- Total Current: 138 A- Recommended Backup Fuse: 160 A- Supply Cable Cross-Section: 70 mm² Cu- Voltage: 3~400 V +N +PE- Frequency: 50 Hz- Max. Short-Circuit Current: 10 kA- Total Machine Weight: approx. 10.7 t (10,700 kg) (Clamping Unit + Hydraulic Unit: 9,700 kg; Injection Unit: 1,000 kg)- Footprint: 10 m²- Total Floor Load / Ceiling Load: 1,070 kg/m²- Foot Area / Floor Contact Area: 2,010 cm²- Specific Ceiling Load: 5.3 kg/cm²- Hydraulic Oil Tank Volume: 450/130 l- Temperature Control Medium Tank Volume: 2x7 l- Compressed Air Pressure: 6 bar- Compressed Air Flow: 0.5 m³/h- Cooling Water Flow: 1.6 m³/h- Cooling Water Inlet Temperature: max. 20 °C at 2.5 bar- Cooling Water Connection: 22-L- Pump Power / Rated Power: 22 kW (28.6 hp)- Pump Current Consumption: 32.0 A- Pump Pressure: 265 bar- Pump Flow Rate: 72/39 l/min- Maximum Mold Width: 560 mm- Maximum Mold Length: 780 mm- Platen / Stroke Dimensions: 600 mm stroke, platen distance 1480 mm, clamping stroke details 710 mm- Heating Plate Center Bore / Ring Size: Ø80 H9- Enclosure Type (UL): 1

Condition: like new (used), Year of construction: 2019, clamping force: 500 kN, Equipment: documentation/manual, _ENGEL – Injection Moulding Machine Technical Data_ Bjdpsz Iyldsfx Afgjww Serial number: 232665 Model: E‑VICTORY _Plasticising Unit 1_ • Screw diameter: 18 mm • Listed diameter options: 15 / 18 / 20 mm; 18 mm is installed • Screw stroke: 80 mm • Maximum injection volume: 20 cm³ • Screw speed: 450 rpm • Screw torque: 75 Nm • Plasticising rate, 3-zone screw: 4.2 g/s _Injection Unit 1_ • Version: Standard • Injection rate: 83.97 cm³/s • Specific injection pressure, regenerative mode: 2,400 bar _Nozzle 1_ • Nozzle stroke: 210 mm • Nozzle contact force: 40.6 kN _Material Cylinder 1_ • Screw L/D ratio: 24 • Heating zones, including nozzle: 4 • Heating power: 5.1 kW • Note: maximum available equipment _Clamping Unit_ • Clamping force: 500 kN (approximately 50 tonnes) • Opening stroke + cylinder tolerance: 408 mm • Maximum distance between platens: 600 mm • Minimum mould height: 200 mm • Platen dimensions, horizontal × vertical: 500 × 450 mm • Drop-out chute width: 400 mm • Maximum mould weight on moving platen: 300 kg • Maximum mould weight on stationary platen: 300 kg • Maximum total mould weight: 600 kg • Dry-cycle stroke according to Euromap 6: 150 mm • Dry-cycle time according to Euromap 6: 1.60 s Mould weight notes: 1. Mould overhang according to mounting platens. 2. Less the weight of any rotary table. _Ejector 1_ • Ejector stroke: 100 mm • Ejector force: 39.8 kN _Drive Unit_ • Oil reservoir capacity – injection unit, main tank: 135 l • Oil reservoir capacity – clamping unit, auxiliary tank: 0 l _Machine Basics_ • Total weight without oil: 4.0 tonnes • Total connected power: 65.0 kW Transcription note: the small footnotes below the plasticising section specify reference materials and test conditions. They are not fully legible in this photo.

Condition: ready for operation (used), Year of construction: 2007, clamping force: 800 kN, Hydraulic injection moulding machine manufactured in 2007. This Engel VICTORY 330/80 Tech features a clamping force of 800 kN and an injection pressure of 1,600 bar. It has an opening stroke of 456 mm and an ejector stroke of 100 mm. If you are looking to get high-quality injection moulding capabilities, consider the Engel VICTORY 330/80 Tech machine we have for sale. Contact us for further details. - Defective / Non-operational (control unit KEBA Kemro CP 251/Z fails to boot and displays error code "8")- Design: Tie-bar-less (Holmlos) - Injection Volume: 154 cm³ - Injection Pressure: 1,600 bar - Opening Stroke: 456 mm - Ejector Stroke: 100 mm - Total Weight: 5,300 kg - Dimensions (L × W × H): Approx. 4,000 × 1,400 × 2,300 mm - Controller: KEBA Kemro K2-200 CP 251/Z (CC 200) - Optional available (not included): Automation, 3-axis handling system, conveyor belt Bedpo Agvcyefx Afgsww

Condition: used, Year of construction: 2023, Machine No. 26, Serial No. 7271-0616, NC5+ control system, maximum clamping force 1,300 kN, conveyor system, manufacturer Colortronic, handling system, manufacturer Wittmann, type Primus 14-0704, year of manufacture 2023, safety enclosure, conveyor belt, L/W approx. 1,800 x 800 mm, skylight. Bsdez H Rc Dspfx Afgjww

Condition: like new (used), Year of construction: 2010, operating hours: 65,850 h, functionality: fully functional, machine/vehicle number: 61013689, clamping force: 2,500 kN, screw diameter: 50 mm, clearance between the columns: 630 mm, displacement volume: 432 cm³, injection pressure: 2,304 bar, injection weight: 393 g, Equipment: documentation/manual, As a dealer in injection moulding machines, we are offering the following well-maintained used injection moulding machine We also, of course, purchase well-maintained injection moulding machines manufactured from 2010 onwards We have been wholesalers of used injection moulding machines for over 25 years In light of recent developments – tax information and benefits for used machinery From 1 July 2025, used machinery will also be eligible for a special annual depreciation allowance of 30% for tax purposes. In addition to the lower price compared to a new machine, you can claim the same depreciation amounts as for a new machine Keyword: Growth booster (Section 7(2) EStG-E) Currently in stock and tested at our Hanover warehouse Manufacturer: Krauss Maffei Model: KM 250 1000 CX Control unit: MC5 Year of manufacture: 2010 Operating hours: 65,850 h Machine number: 61013689 Processed material: PE and PP – thermoplastics Extras - 2 x core pull (movable WAP, fixed WAP) - Pneumatic valve 1 on FWAP - Pressure accumulator for increased injection capacity - Fast SK removal CX Midrange - Ejection of cooled nozzle plug - Start handling during mould movement - Start-up sequence - Cycle time analysis - External USB keyboard - Graphical analysis – maintenance instructions - Electronic coding of injection unit - Pneumatic valve on BWAP blow-out - 12 temperature control points - Potential-free contact BDE - Process monitoring - Cycle storage - Trend graph - Target/Actual graph - PV control - Active back pressure control - From first owner - Origin: Germany Regular maintenance carried out by the manufacturer and previous owner Clamping unit Clamping force: 2500 kN / 250 tonnes. Column spacing: 630 x 630 mm Platen dimensions: 995 x 1050 mm Opening width: 820 mm Mould height: 330 mm min. Opening width max. 1150 mm Ejector stroke: 200 mm Ejector force: 57 kN max/26.3 kg Injection unit Screw diameter: 50 mm Injection volume: 432 cc Shot weight: 393 g/PS Injection pressure: 2304 bar Electrical Bjdpfxjxqhuuo Afgjww Pump: 45 kW Heating: 5 zones, 18.7 kW Weight: 13,900 kg. Dimensions: 5.7 x 2.3 x 2.3 m. Complete documentation, manual and software Available immediately from our warehouse in Hanover, Germany, or free delivery subject to reimbursement of freight costs The machine is offered with a functional test certificate The machine is our sole property The machine in question is available immediately from our warehouse in Hanover, is offered in a functionally tested condition and can be viewed whilst powered up. Information about the machines we offer and our company - We only sell machines purchased from current production from our warehouse in Hanover - All machines on offer are inspected and tested prior to dismantling - We do NOT sell goods from insolvency estates - We are NOT a broker dealing in third-party property. - All machines on offer come from successful companies for whom maintenance and upkeep are a matter of course - All machines on offer can be viewed at our warehouse

Condition: like new (used), Year of construction: 2016, Wittmann Battenfeld Eco Power 110/130 Unilog B6P electric (2016) Clamping force: 110 t Screw diameter: 22 mm Shot volume: 41 cm3 Screw L/D ratio: 20 Calculated stroke volume : 41,8 cm3 Correct injection pressure : 2,864 bar Max. screw speed : 500 min Screw tongue : 150 Nm Nozzle path contact force : 250/40 mm/kN Injection flow outside : 76 cm3/s Cylinder heating capacity : 6,3 kW Number of heating zones : 4 Bwodpfxju Eki Sj Afgsw Working hours: 35.953 hours Type: Horizontal Drive: Electric

Condition: good (used), Year of construction: 2004, Arburg 570C-200-350/150 Bjdpfx Afe Ag S R Rogeww Clamping force: 200 tons Year of manufacture: 2004 Tie bar spacing: 57 x 57 mm Overall height: 300 mm Screw diameter: 45 mm + 35 mm Two-component machine

Condition: used, Year of construction: 1998, This Demag injection molding machine, type: ergotech pro 50-270, will be auctioned off online in our industrial auction / machinery auction focusing on warehouse clearance of industrial machines – injection molding machines, CNC machining centers, universal lathes, and more. Bwedpfxj Agkd Es Afgsw You can find this and many other items on our platform.

Condition: excellent (used), Year of construction: 2020, KRAUSSMAFFEI KM 201-380 PX electric injection molding machine Year of manufacture: 2020 Operating hours: 21,849 h Clamping force: 2,000 kN (200 tons) Control system: MC6 Drive system: servo-electric with servo-hydraulic components Machine characteristics • Five-point, double toggle mechanism for the clamping unit, three-platen design. • Servo-electric drive for the clamping unit. • Servo-electric drive for injection and plasticizing. • Servo-hydraulic drive for the injection unit movement. • MC6 control system based on an industrial computer with real-time Ethernet communication. • Plasticizing unit for thermoplastics with a 40 mm diameter screw. Clamping unit Parameter Value Clamping force 2,000 kN (200 t) Mold opening force 300 kN Mounting plate dimensions (H × V) 870 × 820 mm Distance between columns (H × V) 635 × 585 mm Mold opening stroke 500 mm Minimum mold height 250 mm Maximum mold height 550 mm Maximum plate clearance 1,050 mm Ejector stroke 200 mm Ejector force forward / backward 39 / 19 kN Ejector speed 350 mm/s Injection unit Parameter Value Screw diameter 40 mm L/D ratio 20:1 Maximum injection pressure 1,860 bar Injection volume 201 cm³ Injection shot weight 183 g Injection speed 125 mm/s Injection rate 157 cm³/s Maximum screw speed 334 rpm Plasticizing rate 24.7 g/s Screw torque 337 Nm Bwjdpfjz Szncjx Afgsw Nozzle clamping force 34 kN Nozzle radius 10 mm Nozzle orifice diameter 4 mm Electrical and hydraulic parameters Parameter Value Connected load 13.8 kW Electrical protection 63 A Installed heater power 11.5 kW Number of cylinder heating zones 5 Dry cycle time according to EUROMAP 6 2.0 s / 445 mm Oil tank capacity 200 l Weight and dimensions Parameter Value Net weight with control cabinet 14,300 kg Machine length 6,120 mm Machine width 2,170 mm Machine height 2,210 mm

Condition: ready for operation (used), Year of construction: 2011, operating hours: 32,000 h, functionality: fully functional, clamping force: 2,100 kN, screw diameter: 50 mm, clearance between the columns: 5,80,580 mm, injection weight: 402 g, opening stroke: 690 mm, installation height: 340 mm, Incl. Geiger robot Midiliner F 10.0 year 2011, Conveyor and safety cage Bjdpfo Aarbbox Afgsww

Condition: like new (used), Year of construction: 2022, operating hours: 8,000 h, functionality: fully functional, 1,0 St. gebr. Zweikomponenten Spritzgießmaschine Hersteller: ARBURG Typ: 570A2000-400/70 Bwedpfjvftnaex Afgsw Baujahr: 2022 Schließkraft: 200 Tonnen Holmabstand 570 x 570 mm Einbauhöhe min. /max.: 350 mm Öffnungsweg: 1.000 mm Schnecken DN 1: 35 mm Max. Hubvolumen: 154 cm³ Spritzteilgewicht in PS: 141 g Schnecke DN 2: 25 mm Max. Hubvolumen: 44 cm³ Spritzteilgewicht in PS: 40 g Steuerung: Selogica Technische Ausstattung anfordern.

Condition: good (used), Year of construction: 2016, clamping force: 13,000 kN, Equipment: documentation/manual, _KRAUSSMAFFEI KM 1300 MX – SP 8100_ _Screw Ø105 mm_ _CLAMPING UNIT_ • Clamping force: 13,000 kN / 1,300 t • Mold opening force: 910 kN • Moving platen force (open/close): 159 / 153 kN Bjdpfx Afeztpkpjgsww • Platen dimensions: 2,150 × 1,910 mm • Tie bar distance (H × V): 1,550 × 1,250 mm • Opening stroke: 2,350 mm • Mold height (min./max.): 700 / 1,400 mm • Maximum daylight: 3,050 mm • Ejector stroke: 350 mm • Ejector force (forward/backward): 250 / 125 kN • Optional mold height (min./max.): 950 / 1,650 mm • Daylight with increased mold height: 3,300 mm _INJECTION UNIT – SP 8100_ • Screw diameter: 105 mm • L/D ratio: 23 • Max. injection pressure: 1,778 bar • Stroke volume: 4,546 cm³ • Shot weight (PS): 4,137 g • Injection flow rate: 805 cm³/s • Screw speed (nominal/max.): 126 / 159 rpm • Plasticizing rate PS (nominal/max.): 147 / 187 g/s • Plasticizing rate PE (nominal/max.): 116 / 147 g/s • Nozzle contact force: 166 kN _ELECTRO-HYDRAULIC EQUIPMENT_ • Pump motor power: 110 kW • Installed heating capacity: 59 kW • Barrel heating zones: 7 • Dry cycle rate (Euromap 6): 761 cycles/h • Dry cycle time (Euromap 6): 4.7 s • Oil tank capacity: 1,500 l _DIMENSIONS & WEIGHT_ • Net weight incl. cabinet: 77 t • Dimensions (L × W × H): 12.09 × 3.66 × 2.67 m • Maximum mold weight: 29,000 kg _ELECTRIC SCREW DRIVE_ • Screw drive power: 117 kW • Screw speed (nominal/max.): 123 / 193 rpm • Plasticizing rate PS (nominal/max.): 144 / 226 g/s • Plasticizing rate PE (nominal/max.): 114 / 178 g/s _ACCUMULATOR (ZE)_ • Injection flow rate: 1,732 cm³/s _EQUIPMENT_ • Removable tie bar (retractable tie bar) • Euromap 67 – robot interface • 48 hot runner controllers • 8 pneumatic cascades • 6 hydraulic cascades • 2+2 cores • MC6 control panel _PROCESSED MATERIALS_ • PP, PC

Condition: excellent (used), Year of construction: 2008, DEMAG System 1500/1500-16000 injection molding machine Wittmann W753C robot Year of manufacture: 2008 Clamping force: 15,000 kN (1,500 tons) TECHNICAL SPECIFICATIONS 1. Basic data - Manufacturer: DEMAG - Model: System 1500/1500-16000 - Year of manufacture: 2008 - Clamping force: 15,000 kN (1,500 tons) - Injection unit: 16000 - Additional equipment: Wittmann W753C linear robot 2. Clamping unit - Clamping force: 15,000 kN (1,500 tons) - Mounting plate dimensions (H × V): 2,150 × 1,880 mm - Column spacing (H × V): 1,500 × 1,250 mm - Minimum mold height: 700 mm - Maximum mold height: 1,400 mm - Maximum opening: 2,900 mm 3. Plasticizing unit and injection unit - Injection unit: 16000 - Screw diameter: 145 mm - Injection volume: 10,981 cm³ - Injection shot weight (PS): 9,880 g - Maximum injection pressure: 1,454 bar 4. Hydraulic and electrical system - Rated power of the pump motor: 165 kW - Heater power: 97 kW 5. Machine dimensions and weight - Length: 14,400 mm - Width: 3,400 mm - Height: 2,900 mm Bwsdpfe Af Id Hsx Afgew - Net machine weight: 74,000 kg (74 tons) - Weight of the additional unit identified in the documentation as the control cabinet: 21,000 kg (21 tons) - Total weight according to the provided data: approximately 95,000 kg (95 tons)

Condition: excellent (used), Year of construction: 2007, KraussMaffei KM 950-17200 MX injection molding machine Year of manufacture: 2007 Bwjdpfx As Af Hxxsfgow Clamping force increased to 1,000 tons (10,000 kN) TECHNICAL SPECIFICATIONS 1. Clamping unit - Clamping system: fully hydraulic - Clamping force: 10,000 kN (1,000 tons) – increased from the factory standard of 950 tons - Opening force: 665 kN - Column spacing (H × V): 1,400 × 1,150 mm - Dimensions of mounting plates: 1,960 × 1,710 mm - Opening stroke: 1,900 mm - Minimum mold height: 500 mm - Maximum mold height: 1,200 mm - Maximum mold opening: 2,400 mm - Ejector stroke: 300 mm 2. Plasticizing unit - Complete plasticizing unit for thermoplastics - High-performance HPS-UN screw - Screw diameter: 120 mm - Nozzle radius: 30 mm - Nozzle orifice diameter: 12 mm 3. Injection unit - Screw diameter: 120 mm - Injection weight (HDPE): 5,420 g - Injection volume: 7,634 cm³ - Specific injection pressure: 2,257 bar 4. Control system - Control system based on an industrial computer - Integrated operator panel - Color touchscreen 5. Machine dimensions and weight - Length: 12,770 mm - Width: 3,420 mm - Height: 2,750 mm - Total weight: 61,500 kg (61.5 tons)

Condition: excellent (used), Year of construction: 2007, KRAUSSMAFFEI KM 800-12000 MX Injection Molding Machine - Year of manufacture: 2007 - Machine serial number: 61009705 - Clamping force: 8,000 kN (800 tons) - Machine type: hydraulic, two-platen injection molding machine Bwsdpfx Afe Af Ib Ujgjw - Control system: KraussMaffei MC5 2. Clamping System - Clamping system: hydraulic-mechanical, two-platen - Design: 4 pressure pads and 4 locking units on the moving platen - Clamping force: 8,000 kN (800 tons) - Dimensions of mounting platens (H × V): 1,600 × 1,530 mm - Column spacing (H × V): 1,120 × 1,000 mm - Minimum mold height: 500 mm - Maximum mold height: 1,100 mm - Maximum opening stroke: 2,600 mm 3. Plasticizing System - Complete plasticizing system for thermoplastics - Injection unit: 12000 - Screw diameter: 135 mm - Check valve: yes - Nozzle: open - Injection unit adjustment: PV 4. Injection Unit - Screw diameter: 135 mm - Injection volume: 8,588 cm³ - Injection shot weight: 7,815 g - Maximum injection pressure: 1,389 bar 5. Hydraulic and Electrical System - Rated power of pump motor: 132 kW - Heater power: 90 kW - Operating voltage: 380 V - Power supply: three-phase - Frequency: 50 Hz - Rated current of circuit 1: 255 A - Rated current of circuit 2: 318 A - Main fuse for circuit 1: 315 A - Main fuse for circuit 2: 400 A 6. Control System - KraussMaffei MC5 control system - Color operator monitor - Integrated control panel - USB data carrier support - Adjustment of injection process parameters 7. Machine Dimensions and Weight - Length: 11,720 mm - Width: 2,920 mm - Height: 2,650 mm - Net weight including control cabinet: approximately 50,000 kg (50 tons)

Condition: excellent (used), Year of construction: 2008, KRAUSS MAFFEI KM 1000-4300 MX *General* Year of manufacture: 2008 Control: MC5 Clamping force: 11,000 kN Quick mould change: bolt holes *Clamping unit* Mould height min/max: 600 / 1,200 mm Platen size (H x V): 2,210 x 1,910 mm Tie bar distance (H x V): 1,550 x 1,250 mm Opening stroke: 2,000 mm Ejector stroke: 300 mm Locating ring FP/MP: Ø250 / Ø250 mm Max. mould weight FP/MP/total: 25 t / 25 t / 50 t *Injection unit 1 (main)* Screw diameter: 80 mm L/D ratio: 23 Bedpfx Afsz Eu Uuogjww Shot volume: 1,810 cm³ Injection rate: 503 cm³/s Max. hydraulic pressure: 190 bar Max. injection pressure: 2,328 bar Screw stroke: 354 mm *Injection unit 2 (2K)* Screw diameter: 40 mm L/D ratio: 20 Shot volume: 204 cm³ Injection rate: 161 cm³/s Max. injection pressure: 1,860 bar Screw stroke: 160 mm *Peripherals* Core pulls FP/MP: 2 / 2 Sequential valve gate control: 16 zones Hot runner zones: 48