Condition: used, Year of construction: 2006, Technical details: x-travel: 1000 / 600 mm y-travel: 570 mm z-travel: 570 mm control: Fagor 8055 MC tool changer with: 24 Plätze tool taper: SK 40 Revolution per minute: 10 000 U/min. spindle taper: SK40 feed speeds infinitely variable: X/Y/Z: 10 m/min. rapid traverse:: X/Y/Z: 24 m/min. operating hours - idle run: nicht einsehbar h table-size: 1200 x 500 mm table load capacity: 800 kg distance spindle nose and table: min./max. 100/670 mm interface: 232 total power requirement: 15 kW Weight approx.: 5,0 t dimension machine xH: 3,3 x 2,3 x 2,8 m Equipment: -Cooling device with feed to the spindle (no CTS cooling through spindle)) -operating panel with manual control unit Fpsdpfxeu Idfre Afpjc -chip conveyor -E-cabinet cooling Rittal SK 3305500 *

Condition: used, Year of construction: 2007, Technical details: x-travel: 1200 mm y-travel: 600 mm z-travel: 800 mm distance spindle /table: 125 / 925 mm control: Heidenhain iTNC 530 number of spindle speeds: 9000 steples U/min. max. torque on the spindle: max.82 Nm Fodpfx Afsvithzopspc switched on hours: 43363 h spindle hours: 16319 h tool changer with: 24 Plätze table-size: 1250 x 630 (Kreuzschiebetisch) mm max. table load: 1000 kg spindle taper MT: SK40 spindle drive: 13 kW feed range: X/Y/Z: 40/40/30 m/min rapid traverse:: X/Y/Z: 40/40/30 m/min feed power: X/Y/Z: 7/7/16 kN interface: ja total power requirement: 13 kW Weight approx.: 8,0 t dimension coolant device: ca. L:1,25 x B: 0,7 x H: 1,56 m dimension machine xH: 2,4 x 3,0 x 3,3 m Main spindle: Spindle head DIN 69871, SK 40/DIN 69 871-A40 and pull stud DIN 69872 Drive technology via ball screw drive Equipment: Compact filter/coolant high-pressure system Knoll Chip conveyor/scraper belt conveyor 300mm Tool changing unit with disk magazine for 24 tools Electronic handwheel Operation via Heidenhain control panel Accessories: AL plate 1200x600x45mm with holes Ø 15mm *

Condition: used, Year of construction: 1987, Technical details: x-travel: 700 mm y-travel: 500 mm z-travel: 600 mm table swivelling +/-: A-Achse: 20° / 60° Grad table rotating: B-Achse: 360° Grad control: Maho 432 (3-D Bahnsteuerung) Max. Milling-capacity: ST: 60 und GG: 22 mm tool changer with: 24 Plätze number of spindle speeds: 20 - 6300 U/min. max. table load: 200 kg spindle taper MT: ISO 40 (hydr. Spannung) spindle head swivable left - right: 90° (manuell) ° quill stroke: 80 mm feed range: X/Z: 1 - 3000 und Y: 1 - 4000 und B: 0,1 - 3000°/min. mm/min rapid traverse:: X/Z: 10 und Y: 8 und B: 20 U/min. m/min control voltage: 110/220 V total power requirement: ca. 20 kVA Weight approx.: 5,5 t dimension machine xH: 3,0 x 2,4 x 2,25 m space requirements of the machine approx.: 5,2 x 5,0 x H: 2,3 m NC rotary table Ø 520 mm with A and B axes Adjustable three-phase motor with 4-stage reduction gear Working spindle can be swiveled out for horizontal spindle Equipment: -manual control unit -coolant device -machine ilumination * Fpsdpfx Afsu Idbyopec

Condition: used, Year of construction: 1987, Technical details: x-travel: 760 mm y-travel: 450 mm z-travel: 500 mm control: Mazatrol CAM M-2 tool changer with: 30 tools (Kettenmagazin) Plätze spindle taper MT: ISO 40 Revolution per minute: 28 - 4500 U/min. feed speeds infinitely variable: X/Y/Z: max. 2.000 mm/min max. torque on the spindle: ca. 23 Nm rapid traverse:: X / Y: 24 m/min rapid traverse:: Z: 15 m/min. bore capacity in steel (diameter): Ø 40 mm table-size: 500 x 1150 mm table load capacity - central/maximum: 700 kp total power requirement: 11 kW (24,4 kVA) kW Weight approx.: 6,8 t dimension machine xH: 3,7 x 2,5 x 2,6 m chip conveyor: L: 3,7 x B: 0,75 x H: 1,35 m ATC tool magazine for 30 tools up to Ø 100mm x 330mm, SK40 Hinged belt chip conveyor Knoll-120S-1 with ejection height of 1130mm Coolant tank with pump, 200liter capacity, 30 l/min. Operation via control panel with boom 2000mm. Fsdevc Avbepfx Afpopc accessories: cooling lubricant pump Base plates *

Condition: used, Year of construction: 2019, x-travel 2.000 mm y-travel 820 mm z-travel 720 mm Control Mazatrol Smooth G spindle taper SK 40 spindle turning speed range 35 - 12.000 U/min spindle motor 22 kW distance spindle centre table top edge 140 - 860 mm table load 1700 Kg rapid travel x/y/z 50 m/min table width 820 mm table length 2500 mm table height over floor 870 mm T-slots 7 T-slot - width 18 mm T-slot - distance 100 mm tool change unit 48 tool changing time 4,7 sec wotkpiece diameter with 2 vacant positions 130 mm workpiece diameter at full load 80 mm max. tool weight 8 kg tool length - max. 350 mm air pressure - required 5 - 9 bar Air volume 260 l/min electrics - voltage/frequency 400 / 50 V/Hz coolant tank 450 l high-performance coolant system 25 bar total power requirement 46,7 kW weight of the machine ca. 14,8 t dimensions of the machine ca. 4,3 x 3,6 x 3,1 m STANDARD ACCESSORIES Transformer for the European market USB port (1 port) Mazak standard colour Spindle speed 12,000 min-1 (steep taper 40) Work area lighting SAFETY DEVICES Operator door with locking switch Work area panelling The splash guard encloses the working area from the side. Fully enclosed work area Protection against chips, coolant and access to the work area during automatic machining. Safety precautions in accordance with global standards Fpjdotuggcopfx Afpsc COOLANT SUPPLY Coolant supply through spindle (pressure at the pump = 5 bar) Complete coolant system includes pumps, valves, pipework and nozzles for the efficient production of quality components. FACTORY AUTOMATION Automatic switch on/off and warm-up function Automatic switch-on of a warm-up cycle via digital timer MEASUREMENT SYSTEM Tool length measurement and tool breakage detection CHIP DISPOSAL Factory preparation for chip conveyor (left) NUMERICAL CONTROL Fixed control/operating unit Relocation Detector Mazatrol SmoothG control unit 19" LCD colour screen (touch screen) Mazak tapping/drilling cycle Tornado (Mazatrol) By drilling and tapping in helical machining mode, a wide range of diameters a wide range of diameters can be machined at high speed with a wide range of diameters can be machined at high speed with just one tool. This function minimises programming and machining times. EIA/ISO input function Tool path check in the background The tool path of a programme can be checked even if another programme number is programme number is called up and processed in automatic mode. 3D coordinate conversion Shape compensation for rotating axes Mazacc 2D software (contour correction) Accuracy is maintained at high feed rates. Mazacc-3D software package for high-speed machining High-speed and high-accuracy machining for contours defined in the finest programme contours defined in the finest programme increments. MAZACC-3D high-speed software package (NO456) is additionally required. Control with high smoothing Interface for LAN SD Memory Card I/F Smooth standard software for M/C - NO443 B) MAZACC-2D software (workpiece shape compensation) - NO444 D) MAZACC-3D high-speed software package - NO445 B) Shape compensation for rotating axes - NO497 D) High accuracy control for finishing operations - Seamless corner point control - Variable acceleration control - Ultra high speed machining mode - NO498 Rapid traverse paths Rounding function Absolute positioning system Machine incl. the f...

Condition: used, Year of construction: 2008, total height: 2,750 mm, total length: 2,900 mm, total width: 2,400 mm, Empty weight: 8.500 kg Price: On request - Year: 2008 - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Serial number: MB116360 - Drive system: CNC Fpodpfx Aoxta Niefpjc - Number of axes [pcs]: 3 - X-axis travel [mm]: 1100 - Y-axis travel [mm]: 650 - Z-axis travel [mm]: 600 - Table length [mm]: 1300 - Table width [mm]: 650 - Tool holder: SK40 - Max. spindle speed [rpm]: 8000 - Options: Chip collection tray, Chip conveyor, External cooling, Tool magazine, Machine-vice - └ Tool magazine [pcs.]: 24 - Transport dimensions: 2900mm x 2400mm x 2750mm (l x w x h) - Transport weight [kg]: 8500kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: like new (used), Year of construction: 2016, operating hours: 689 h, functionality: fully functional, Wonderful 3-axis machining center High-performance machining center SPINNER VC750 with Siemens (840DE-SolutionLine V2) Equipped with Siemens 840DE-SolutionLine control Hardly used, only for experimental purposes at an engineering service provider 15" color screen with graphical user interface for shopfloor programming Siemens "Shop-Mill-OPERATE" 7 Combi-Drive Milling spindle up to 12,000 rpm, "In-Line" direct drive Power 11 kW (S6/40%) Traverses X=760 mm, Y=460 mm, Z=460 mm; 36 m/min Tool taper size 40 according to DIN 69871-A, pull studs according to DIN 69872-A Spindle taper air purge system High-speed automatic tool changer with double-arm changer for 24 tools Linear guides on all three axes Required leveling elements at the machine bed for alignment Full splash guard enclosure + coolant system + work area lighting Two-tone paint finish RAL 7035/5008 Internal coolant supply 698 power-on hours Fedpfx Afeyhic Aepjpc Approximately 110 spindle hours The VC750 is our dynamic and compact machining center. It is especially suitable for use in job shops and training facilities. The machine is specialized for economical and versatile production of small to medium-sized workpieces. In terms of cost efficiency, it is unmatched.

Condition: used, Year of construction: 2021, HAAS MINIMILL 2 Year: 2021 Table size: 1016 mm x 356 mm X-axis travel: 508 mm Y-axis travel: 406 mm Z-axis travel: 356 mm Spindle: SK40 Spindle speed: 0-6000 rpm 2x Renishaw probes Fsdpfx Afjyaqtaopspc Tool changer: 20 tools Approximate weight: 2313 kg

Condition: excellent (used), Year of construction: 2008, CNC Machining Centre WAGNER WMC 800 R 2008 Siemens 810 D Technical data: X-axis travel: 800 mm Y-axis travel: 500 mm Z-axis travel: 510 mm Table height: 830 mm Max. tool length: 250 mm Tool diameter: 80 mm Clamping area: 800 x 450 mm Number of tool stations in magazine: 20 Fodpjyhdwnsfx Afpjpc Spindle speed range: 8000 rpm

Condition: excellent (used), Year of construction: 2007, CNC Machining Centre Fjdpfx Afeyhbx Aspspc DECKEL MAHO DMC 835V Year of manufacture: 2007 Control: Siemens 840D Technical specifications: X-axis: 835 mm Y-axis: 510 mm Z-axis: 510 mm Table size: 1000 x 560 mm Spindle speed range: 20 to 10,000 rpm 3D path control Tool holder: SK40 Tool changer with 30 positions

Condition: excellent (used), Year of construction: 2002, operating hours: 69,000 h, functionality: fully functional, travel distance X-axis: 800 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 600 mm, rapid traverse X-axis: 50 m/min, rapid traverse Y-axis: 50 m/min, rapid traverse Z-axis: 50 m/min, nominal power (apparent): 69 kVA, controller manufacturer: Siemens, controller model: Sinumerik 840D powerline, total height: 2,800 mm, total length: 7,000 mm, total width: 4,000 mm, table width: 630 mm, table length: 800 mm, table load: 800 kg, overall weight: 10,000 kg, spindle speed (min.): 20 rpm, spindle speed (max.): 12,000 rpm, operating hours of spindle: 27,000 h, coolant supply: 40 bar, spindle nose: HSK63, number of slots in tool magazine: 40, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, DMG MORI DMC 80U Fedpfev Eurmjx Afpepc Year of manufacture: 2002 Operating hours: 69,000h Spindle hours: 27,000h Equipment: 5-axis Swivel head Direct path measurement in X/Y/Z (glass scales) Chip conveyor Extraction NC rotary table as an add-on table Pallet changer Tool magazine 60 places Heidenhain measuring probe Handwheel Rotating viewing window IKZ 40 bar Chip flushing Operating mode 4 + Machine technically serviced and in very good condition + Geometrically within new machine tolerance + Transport and commissioning can be offered separately

Condition: new, Year of construction: 2025, operating hours: 100 h, functionality: fully functional, travel distance X-axis: 800 mm, travel distance Y-axis: 550 mm, travel distance Z-axis: 550 mm, rapid traverse X-axis: 42 m/min, rapid traverse Y-axis: 42 m/min, rapid traverse Z-axis: 42 m/min, nominal power (apparent): 25 kVA, torque: 135 Nm, controller manufacturer: Siemens, controller model: 828D, workpiece weight (max.): 600 kg, total height: 3,000 mm, total length: 2,600 mm, total width: 2,310 mm, table width: 1,000 mm, table length: 550 mm, table load: 600 kg, overall weight: 5,000 kg, spindle speed (min.): 1 rpm, spindle speed (max.): 12,000 rpm, operating hours of spindle: 10 h, coolant supply: 30 bar, spindle motor power: 19,000 W, spindle nose: HSK63A, number of spindles: 1, number of slots in tool magazine: 30, input voltage: 400 V, type of input current: AC, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Vertical Machining Center EM855A Technical specifications: Fpjdsw Hbzispfx Afpec - Control: Siemens 828D - Internal coolant supply (IKZ) 30 bar - Renishaw OMP60 probe - Renishaw TS27R tool measurement - Direct measuring systems in X, Y, and Z axes by Heidenhain - Automatic door opening - Automatic power-off function - Automatic tool changer (30 positions, HSK63) - Centralized automatic lubrication system - Telescopic guideway covers - Electronic handwheel for manual control - Signal light tower - Machine operating manual - Pneumatic air gun - Water gun - Air gun - Chip conveyor - Coolant tank 286L Service and spare parts for US Wheeler machines within Germany are provided exclusively by Gebrüder Eichten Werkzeugmaschinen GmbH.

Condition: used, Year of construction: 2015, x-axis 1250 mm y-axis 840 mm z-axis 550 mm control Siemens 840D turning speed range - main spindle 12000 min/-1 drive capacity - main spindle 22,5 kW Torque max. 140 Nm Number of tools 24 St. max. tool length 320 mm spindle taper HSK 63 Number of working hours 56000 h spindle hours 17500 h weight of the machine ca. 9,7 t This machine can be viewed under power by appointment and is in our estimation in very good condition. Fpjdpfx Aex I Sh Aefpoc Furnishing: - IKZ - chip conveyor - Glass measuring rods in all axes - automatic door - Swivel axis with counter bearing, Fibro There are 4 identical machines available. The machines were used for light countersinking and drilling work. Changes and errors in the technical data and information, as well Subject to prior sale!

Condition: ready for operation (used), Year of construction: 2004, First MCV 2000 - Vertical Machining Center with Fanuc 0i control - full functtional and under power Specifications: Table dimensions: 2200 x 1000 mm X axis travel: 2050 mm Y axis travel: 1150 mm Z axis travel: 760 mm Spindle speeds: 12.000 rpm Fpodom E Ttxspfx Afpec Work feed: 8.000 mm/min Rapid speed Z-axis: 15 m/min Rapid speed X - Y axis: 20 m/min Machine in stock, fast delivery

Condition: good (used), Year of construction: 2002, functionality: fully functional, Year of manufacture: 2002 Fpsdsx Uwr Topfx Afpoc Width: 1000 mm Length: 400 mm Height: 700 mm Number of axes: 5 Tool holder: SK50 Spindle speed (rpm): 15,000 Machineable materials: Steel, Aluminum, Titanium, Graphite, Copper, Invar, Composite, Delrin, PEEK

Condition: good (used), Year of construction: 2016, functionality: fully functional, travel distance Z-axis: 1,400 mm, Year of manufacture: 2016 Width: 3,000 mm Length: 1,400 mm Height: 700 mm Number of axes: 3 Tool holder: BT50 Spindle speed (RPM): 6,000 Machinable materials: Steel, Aluminum, Titanium, Graphite, Copper, Invar, Composite, Delrin, Peek Fpjdpfx Ajx Uwltjfpoc

Condition: used, Year of construction: 2019, travel -x axis 1.525 mm travel -y axis 770 mm travel -z axis 625 mm control HEIDENHAIN - TNC620 Fpsdpfxsyhrbuo Afpjc table dimension (L x W) 1.600 x 750 mm numbers of positions in the tool changer 24 tool taper SK50 Milling machining centers - vertical | DOOSAN - MYNX 7500/50 II equipped with 24-way tool changer, ITC cooling system and chip conveyor. The machine only has 3.165h spindle hours. The machine is in a well-maintained condition. The machine video from the production plant will be shared on request. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: MYNX7500/50II | MYNX 7500 | MYNX7500 | MYNX-7500 | MYNX750050II

Condition: ready for operation (used), Year of construction: 2000, functionality: fully functional, machine/vehicle number: 164, travel distance X-axis: 250 mm, travel distance Y-axis: 200 mm, travel distance Z-axis: 300 mm, controller model: GE FANUC Series 16i-M, spindle speed (max.): 14,000 rpm, TECHNICAL DETAILS X-axis travel: 250 mm Y-axis travel: 200 mm Z-axis travel: 300 mm Number of axes: 3 Max. spindle speed: 14,000 rpm Table length: 400 mm Table width: 250 mm Number of T-slots: 3 Distance between T-slots: 80 mm T-slot width: 14 mm Tool magazine capacity: 48 Fedpfjyhnzkox Afpspc Tool holder: HSK E40 Working feed rate: 20 m/min Rapid traverse: 30 m/min Max. feed force: 3,700 N MACHINE DETAILS Control: GE FANUC Series 16i-M Resolution: 1 µm Compressed air supply: 6 bar Electrical connection: 50 Hz 3x 400 Volt Spindle drive power: 10.4 kW Total power requirement: 18 kVA Dimensions & Weight Dimensions (L x W x H): 2,100 x 1,630 x 2,265 mm Machine weight: approx. 1,700 kg Required floor space: approx. 2 m² EQUIPMENT Vice: Jaw width 100 mm Set of tool holders Coolant system Lighting

Condition: ready for operation (used), Year of construction: 1997, functionality: fully functional, machine/vehicle number: 194-03, travel distance X-axis: 2,000 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 425 mm, table width: 450 mm, table length: 2,280 mm, TECHNICAL DETAILS Travel X-axis: 2,000 mm Travel Y-axis: 400 mm Travel Z-axis: 425 mm Total number of axes: 3 Table length: 2,280 mm Table width: 450 mm Number of T-slots: 3 T-slot spacing: 150 mm T-slot width: 18 mm Spindle speed: 10,500 rpm Number of tools: 20 Tool diameter: 65 mm Fpodpeyhnfcjfx Afpec Diameter with free adjacent slots: 180 mm Max. tool length: 220 mm Max. tool weight: 8 kg MACHINE DETAILS Control: SIEMENS SINUMERIK 810 M Connection: 50 Hz 3x 400 Volt Spindle motor: 18 kW Total power requirement: 31 kVA Dimensions & Weight Dimensions (L x W x H): 4,000 x 3,010 x 3,040 mm Machine weight approx.: 7,200 kg EQUIPMENT Coolant system Chip conveyor Electronic handwheel

Condition: ready for operation (used), Year of construction: 2005, operating hours: 5,934 h, travel distance X-axis: 406 mm, travel distance Y-axis: 305 mm, travel distance Z-axis: 254 mm, controller manufacturer: HAAS, spindle speed (max.): 40,000 rpm, number of axes: 3, This 3s HAAS Super Mini Mill HE was manufactured in 2005, featuring a robust Haas CNC Control and an IBAG Switzerland spindle with a maximum speed of 40,000 rpm. The machine includes an Automatic Tool Changer with a capacity for 18 tools, ensuring efficient operation. If you are looking to get high-quality machining capabilities, consider the HAAS Super Mini Mill HE vertical machining centre we have for sale. Contact us for further details. • Spindle: • IBAG Switzerland spindle • Water-cooled • Tool holder: HSK E32 • Tool changer: • Type: Automatic Tool Changer (ATC) • Capacity: 18 tools • Working hours (from control): • Servo time: 9,158 h • Motion time: 4,984 h • Spindle time: 5,934 h • Idle time: 0:44 h Fpsdpfoyhfltjx Afpoc • Electrical data: • Voltage: 360–480 V • Phase: 3 • Frequency: 50/60 Hz • Full load current: 20 A • Largest load: 35 A • Short-circuit interrupting capacity: 10,000 A Technical Specification Taper Size HSK 32

Condition: ready for operation (used), Year of construction: 2008, travel distance X-axis: 610 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 610 mm, total height: 2,600 mm, overall weight: 4,300 kg, spindle speed (max.): 12,000 rpm, number of axes: 3, This 5-axis Hurco VMX 24t was manufactured in 2008, featuring a Winmax Version 9 control system, a robust table size of 762 x 510 mm, and a high-speed spindle at 12000 rpm. It supports a maximum table load of 1350 kg and offers extensive X, Y, and Z travels of 610 mm each. Accessories include a coolant system with IKZ, spindle cooler, and a large chip conveyor. Contact us for more information about this machine. Additional equipment Fpodsx Nkpzjpfx Afpsc • Coolant system with IKZ (20 bar) • Spindle cooler • Large chip conveyor Machine Benefits Technical Machine Benefits • Winmax version 9 control system • Table dimensions: 762 x 510 mm • Mounting: sk40 Extra Information Machine still under power Dimensions Machine Depth 2300 mm

Condition: ready for operation (used), Year of construction: 2022, travel distance X-axis: 1,200 mm, travel distance Y-axis: 660 mm, travel distance Z-axis: 610 mm, controller manufacturer: HEIDENHAIN, table load: 1,200 kg, spindle speed (max.): 1,200 rpm, tool weight: 7,000 g, number of axes: 3, This 3s Takumi V12s vertical machining centre was manufactured in 2022. It features a robust table size of 1,250 x 650 mm and a maximum load capacity of 1,200 kg, making it suitable for various machining tasks. With a spindle speed of 12,000 rpm and rapid feed rates of up to 24 m/min, it offers efficient performance. Consider the opportunity to buy this Takumi V12 vertical machining centre. Contact us for further details. Fpedpfx Afeyhcy Uepec • Distances: • Floor to table surface: 931 mm • Spindle nose to table: 150–760 mm • Spindle center to column: 700 mm • Table: • Size: 1,250 x 650 mm • T-slots (width x pitch x number): 18 x 100 mm x 5 • Feeds: • Rapid (X/Y/Z): 24 / 24 / 20 m/min • Cutting (X/Y/Z): 1–8,000 mm/min • Manual continuous feed: 0–1,260 mm/min • Optical scales: Yes • Tool magazine (BT40): • Number of tools: 24 • Type: Disc • Max tool diameter: 80 mm • Max tool length: 300 mm • Max diameter with adjacent empty slots: 150 mm Technical Specification Taper Size BT 40

Condition: ready for operation (used), Year of construction: 2011, travel distance X-axis: 900 mm, travel distance Y-axis: 430 mm, controller manufacturer: MAZATROL, controller model: Smart, spindle speed (max.): 12,000 rpm, spindle motor power: 18,500 W, number of axes: 3, This 3s Mazak VCS 430A vertical machining centre was manufactured in 2011. It features a powerful 18.5 kW spindle with a speed of 12,000 rpm and a table size of 900 x 430 mm. The machine offers rapid traverse of 42 m/min and includes a high-pressure coolant system, synchronized tapping, and tool length measurement. If you are looking to get high-quality machining capabilities, consider the Mazak VCS 430A machine we have for sale. Contact us for further details. • Operating hours: 33,000 • Spindle hours: 22,000 • Rapid traverse: 42 m/min • Installed options/software: • High-pressure coolant (through-spindle), 15 bar • Synchronized tapping • Tool length measurement • Workpiece air blast • Hand-held coolant nozzle • Automatic peck drilling cycle with load detection • G00 slope constant function Fjdjyhcvijpfx Afpepc • High surface smoothing on contours (High Smoothing Control) • Mazatrol-to-ISO program conversion • Program memory expansion • Preparation for workpiece probe (OMP60) • Preparation for chip conveyor (left side) • MAZACC-3D high-speed software package • CNC functions and connectivity: • NC user macros • Mazak drilling/tapping cycles (Mazatrol & EIA) • EIA/ISO code input • Constant tool tip speed function • Programmable block stop (M01) • Background tool path verification (MAZACC-2D) • Up to 300 workpiece coordinate systems • Thread cutting functions • EIA canned cycles (chamfering, arc machining) • USB interface (2 ports) • LAN port Additional equipment • Chip conveyor, left-hand, hinge type (Mayfran) • 4th-axis simultaneous kit: Kitagawa NC rotary table (MR200) Technical Specification Taper Size ISO 40

Condition: ready for operation (used), Year of construction: 2023, travel distance X-axis: 1,270 mm, travel distance Y-axis: 660 mm, travel distance Z-axis: 635 mm, table load: 1,588 kg, overall weight: 6,623 kg, spindle speed (max.): 8,100 rpm, spindle motor power: 22,400 W, number of axes: 3, This 3s HAAS VF-5/40 vertical machining centre was manufactured in 2023. It features an impressive X-Axis travel of 1270 mm, Y-Axis travel of 660 mm, and Z-Axis travel of 635 mm, making it suitable for various machining tasks. With a spindle speed of 8100 rpm and a tool changer capacity of 20/24+1 stations, consider the opportunity to buy this HAAS VF5/40 vertical machining centre. Contact us for further details. • Table size: 1321 x 584 mm • Drive system: Inline direct-drive • Tool changer capacity: 20/24+1 stations • Rapid traverse (X/Y/Z): 18 m/min • Max cutting feed: 12.7 m/min Fjdpfxoyhckts Afpjpc Technical Specification Taper Size BT 40

Condition: ready for operation (used), Year of construction: 2016, travel distance X-axis: 200 mm, travel distance Y-axis: 150 mm, travel distance Z-axis: 250 mm, controller manufacturer: EMCO, total height: 1,100 mm, table load: 10 kg, overall weight: 400 kg, spindle speed (max.): 5,000 rpm, spindle motor power: 1,100 W, tool weight: 700 g, product length (max.): 1,135 mm, number of axes: 3, This 3s EMCO Concept Mill 105 was manufactured in 2016. It features a maximum spindle speed of 5000 rpm and a spindle motor power of 1.1 kW, providing efficient machining capabilities. The machine has a table size of 420 × 125 mm and a maximum table load of 10 kg. If you are looking to get high-quality milling capabilities, consider the EMCO Concept Mill 105 vertical machining centre we have for sale. Contact us for further details. • Distance spindle nose to table: 95–245 mm • Table size: 420 × 125 mm • T-slots: 2 × 11 × 90 mm • Max spindle torque: 4.2 Nm • Rapid traverse (X/Y/Z): 5 m/min • Feed rate: 0–5 m/min • Max feed force X/Y: 2000 N • Max feed force Z: 2400 N • Positioning accuracy (X/Y/Z): 0.005 mm • Repeatability: 0.005 mm • Tool stations: 10 • Max tool diameter: 55 mm • Max tool length: 50 mm • Tool change time (T1–T2–T3): 9.7 / 5 / 7.5 s • Connected load: 1.4 kW Fpjdpeyhcfkofx Afpjc • Required air pressure: 6 bar