Used material testing for sale (477)

Year of construction: 2017, condition: ready for operation (used), A portable surface roughness measuring device Mitutoyo including a granite plate is available. Measurement range X: 17.5mm, measurement range Z: -200µm-160µm, Z resolution: 0.002µm, measuring speed: 0.5mm/s, return speed: 1mm/s, granite measuring table dimensions X/Y/Z: 400mm/250mm/70mm. Documentation available. An on-site inspection is possible. Ijdpjya Hx Sefx Abcjhw

Year of construction: 2019, condition: ready for operation (used), A Niehues hydraulic testing system is available. 1) TP pump, motor power: 315kW, liter capacity: 13.94l-41.83l/min, max. operating pressure: 25bar, nominal delivery head: 28m. 2) NKG pump, motor power: 315kW, liter capacity: 5.61l-16.83l/min, max. operating pressure: 16bar, nominal delivery head: 80.7m. 3) Tank, volume: 11400l, permissible pressure: 0.5bar-10bar, operating pressure min./max.: 1bar-5.5bar, medium: drinking water without additives, temperature min./max.: -10°C-50°C, permissible load rating: 1000. Isdpfet Daq Usx Abcshw

Year of construction: 2018, condition: ready for operation (used), A complete Anritsu X-ray system for packaged products is available. 1) X-ray unit KXS7534AVCLE: Tube voltage: 30kV-80kV, tube current: 0.4mA-3.3mA, output power: 12W-100W, detection width/height: 390mm/220mm, belt width: 420mm, belt speed: 10m/60m/min, max. belt load: 5kg, ambient temperature: 0°C-35°C, relative humidity: 30%-85%, weight: approx. 300kg. 2) Metal separator KDS450ABW: working width: 450mm, working height: 95mm. 3) Metal separator KW466CW: max. product dimensions X/Y/Z: 350mm/200mm/30mm (100mm for regular interval), max. product weight: 500g, max. output: 80 products/min. 4) Material feed through Jöst FDL 350/60x500 vibratory feeder. Documentation available. Isdpfx Ast Dpn Aobcshw

Condition: ready for operation (used), Two drying and heating ovens Binder for laboratory use are available. 1) Binder ED 400, usable volume: 400L, internal dimensions X/Y/Z: 1000mm/800mm/520mm, levels: 2, max. load per level: 35kg, max. total load: 90kg, recommended wall clearance rear/side: 160mm/100mm, max. temperature variation: +/-3K, max. temperature: 300°C, power: 3.4kW, machine dimensions X/Y/Z: approx. 1250mm/1050mm/800mm, weight: approx. 125kg. 2) Binder KBF 115, usable volume: 100L, max. temperature: 100°C, power: 1.7kW. Documentation available. An on-site inspection is possible. Ihsdpfx Absxhntlscsw

Year of construction: 2015, condition: ready for operation (used), An X-ray inspection device Mekitec for the food industry is available. Measurement device type: Rad Eye B20, max. power: 60kV/1.66mA/100W, method: inline inspection, test object: packaged food products, tunnel clearance X/Y: approx. 250mm/100mm, belt length: 1200mm, belt width: 250mm, max. belt speed: 1.3m/s, max. product weight: 5kg, machine dimensions X/Y/Z: approx. 2000mm/550mm/1200mm, weight: approx. 100kg. Documentation available. An on-site inspection is possible. Ihodoxnp Scopfx Abcew

Condition: ready for operation (used), An Alpha viscometer for testing raw elastomers and rubber compounds is available. Test standards: ASTM D1646/D3346, max. temperature: 200°C, rotational speed: 2rpm. Machine dimensions X/Y/Z: approx. 800mm/700mm/1350mm, weight: approx. 200kg. Without software. Documentation available. An on-site inspection is possible. Ihedpfx Asxrukrebcew

Condition: ready for operation (used), An Alpha rubber process analyzer for testing the rheological and dynamic properties of elastomers and rubber compounds is available. Frequency range: 0.1-3000cpm, max. temperature: 230°C, max. heating rate: 1°C/s, max. cooling rate: 0.5°C/s, max. strain: +/-90°, test standards: ASTM D5289/D6048/D6204/D6601/D7050/D7605/D8059. Machine dimensions X/Y/Z: approx. 800mm/700mm/1350mm, weight: approx. 200kg. Including PC with Eclipse software and spare parts. Documentation available. On-site inspection possible. Ihedpexrukxefx Abcjw

Year of construction: 1998, condition: good (used), Vötsch VTR 7033/S Temperature Test Chamber Manufacturer: Vötsch Type: VTR 7033/S Item No.: 60885637 Temperature Chamber Temp. Range: -70°C to +180°C Line Voltage: 400V Rated Current: 24A Rated Power: 9.5 kW Refrigerant (VK): R 404 A Refrigerant (TK): R 23 Year of Manufacture: 1998 TK 09 Financing through our bank is also possible. Ihsdpfx Abouuin Rjcew komplett-konzept.leasingo.de Find more items - new and used - in our shop! International shipping costs upon request!

Condition: good (used), Vötsch VCS 7100 Climatic Test Chamber -70°C to +180°C Manufacturer: Vötsch Type: VCS 7100 Temp. Range: -70°C to +180°C Line Voltage: 400 V Rated Current: 17 A Rated Power: 11 kW Refrigerant: R404A Height: 1980 mm Ihjdpfx Asuuix Nsbcow Width: 1350 mm Depth: 2060 mm Chamber: Height: 900 mm Width: 970 mm Depth: 1400 mm KK-05 Financing through our bank is also possible. komplett-konzept.leasingo.de Find more items - new and used - in our shop! International shipping costs upon request!

Year of construction: 2004, operating hours: 34,304 h, condition: excellent (used), Weiss climatic test chamber -70 to +180 °C Manufacturer: Weiss Umwelttechnik GmbH Type: Climatic chamber WK-1000/70 Test chamber volume: 990 liters Temp. range: -70 to +180 °C Humidity: 10 to 98 % Mains voltage: 400 V 3/N 50 Hz Rated current: 29 A Nominal output: 13.8 kW Refrigerant: R 404A Control system SIMCON/32 microprocessor-controlled control and monitoring system Isdpeph U Aysfx Abcshw - 32 bit technology - Graphic display of setpoint and actual value - Digital setpoint and actual value display of temperature and % relative humidity - digital input for temperature in °C and humidity in % rel. humidity - Integrated programmer - program memory - Manual and automatic operation - Fault diagnosis system Operating hours: 34303.8 h Year of construction: 2004 Test area dimensions: Height: 950 mm Width: 1100 mm Depth: 950 mm External dimensions: Width: 1400 mm Depth: 1900 mm Height: 1970 mm Financing through our bank is also possible. komplett-konzept.leasingo.de Further articles - new and used - can be found in our store! International shipping costs on request!

Year of construction: 2000, operating hours: 1,04,382 h, condition: excellent (used), Vötsch Shock Test Chamber VT 7012 S2 System for extreme temperature cycling Temperature shock testing is used to test the resistance of components, devices, and other products to rapid changes in ambient temperature. The test specimens are subjected to rapid temperature changes in air with alternating upper and lower temperature loads. These cyclical stresses and the accelerated aging caused by temperature changes reveal weaknesses in the test specimen. Vertical arrangement of the test chambers Ball screw drive for safe guidance of the car Cart load capacity 50 kg for VT3 7012 S2 All-around grilles in the car secure the test specimens High air circulation rate, short temperature change times, and uniform temperature distribution in the test chamber Hot chamber can be used as a temperature storage unit, cold chamber as a temperature exchange unit Minimal energy consumption No compressed air required Manufacturer: Vötsch Type: VT 7012 S2 Type: Temperature shock test chamber Test chamber volume: 120 l Nominal voltage: 400 V Nominal power: 10 kW Nominal current: 25 A Refrigerant: R452A Cooling unit: Water-cooled Shock cooling (nitrogen cooling) via customer-supplied nitrogen External dimensions Width: 930 mm Depth: 2115 mm Height: 1970 mm Test chamber dimensions Width: 470 mm Depth: 650 mm Height: 410 mm Protection class Device: IP 42 Operating panel: IP 20 Control cabinet: IP 54 Temperature test parameters for single-chamber operation | Test chamber dimensions Width: 470 mm Depth: 650 mm Height: 410 mm Protection class ...Temperatur Temperature range Hot chamber: +50°C to +220°C Cold chamber: -70°C to +70°C Temperature deviation over time: ±2 K in steady state Temperature deviation over space: ±2 K in steady state in the car Heating rate, hot chamber: 11 K/min Cooling rate, cold chamber: K/min Heating rate, cold chamber: 2 K/min Cooling rate, hot chamber: K/min Ihjdpfx Abex Exmtscjw Observation window: 355 x 355 mm Pipe opening: 67 mm Year of manufacture: 2000 Operating hours: 104,382 Weight: 1000 kg Financing through our bank is also possible. komplett-konzept.leasingo.de Further items – new and used – can be found in our shop! International shipping costs on request!

Condition: good (used), Weiss Climatic Test Chamber with Seat Pulsator Manufacturer: Weiss Type: SD 1400/+20 DU Test Chamber: Material: Stainless steel Dimensions Height approx. 800 mm Width approx. 2000 mm Depth approx. 900 mm Capacity: 1440 liters Outer casing Material: Double-coated Zincor sheet Dimensions Height approx. 2000 mm Width approx. 2200 mm Depth approx. 2000 mm HxWxD 2000 x 2200 x 2000 mm Paint finish: Light gray (RAL 9002) Double-leaf door: hinged on the left and right Equipment: Tubing in the floor and ceiling: 2 each, NW 100 mm, for installing the pulsator tables Tubing in the the side walls: 1 each, left and right, 100 mm Cooling unit: Air-cooled Control: Digital measurement and control system DMR Basic control panel: Integrated into the main switch panel Interface: RS 232 C, for connection to a PC Software: Operating software for MS Windows Performance data: Temperature range without air conditioning: +20...+100 °C Temperature stability without air conditioning: +0.2 ... t0.5 K (over time) depending on the range, in steady state Temperature range with air conditioning: 20...+95 °C Temperature stability with air conditioning: +0.2 ... +0.5 K (over time) depending on the range, in steady state Dew point range: 20...+94 °C Humidity range: 10...98 % RH Humidity stability: +3 ... +5 % RH depending on the range, in steady state Temperature change rate measured in the exhaust without a test specimen and without load - Cooling: 0.5 K/min on average, between +100 and +20 °C ⁃ Heating: 0.5 K/min. On average, between +20 and +100 °C The performance specifications refer to an ambient temperature of max. +25 °C and the specified nominal voltage. For proper operation of the system, the ambient temperature must be between +10 and +35 °C. Seat test device with steel construction for placing and attaching to the climatic test chamber, including: • 2 pneumatic weight lifting devices (150 mm stroke) for changing test specimens, 12 weights of 5 kg each • 1 base frame in mild steel welded construction for attaching to the underside of the climatic test chamber. This frame is equipped with removable panels on all sides and has two hinged doors for adjusting the eccentricity. These doors have safety switches. • 2 eccentric discs with bearings and tachometer, 2 connecting rods, 2 ball bearings, • 2 mounting tables, perforated, 20 mm grid, 650 x 650 mm, for attaching the test specimens, made of aluminum, thickness min. 10 mm • 2 mounting plates, perforated, 20 mm grid, 200 x 200 mm, for attaching the buttocks simulation Ihsdsxbgrgspfx Abcsw • 2 stainless steel 60° load rods (The connection to the test specimen is not included in our price, but can be offered subsequently upon precise specification.) • 2 three-phase motors, 2 belt drives with tensioning devices, • 1 pneumatic control unit with 2 manual valves, a filter-regulator unit, and a shut-off valve. 1 electrical control cabinet with 2 SEW frequency converters, hand switches, emergency stop button, 2 on/off switches, 2 speed indicators, 2 potentiometers for speed adjustment, 2 pre-selected load changers with zero position and shutdown. Technical specifications: Frequency: 100-1000 strokes/minute Load: 2 x 45 g Stroke: 0-40 mm Load from above: 450 N each Financing through our bank is also possible. komplett-konzept.leasingo.de You can find more items - new and used - in our shop! International shipping costs upon request!

Condition: good (used), Vötsch VTU 100/150 heating and drying cabinet Manufacturer: Vötsch Type: VTU 100/150 Nominal temperature: 250 °C Usable volume: 1500 m³ Total load: 400 kg Nominal power: 27 kW Connected load: 29 kW Nominal current: 42 A Mains connection: 400 V, 3 PH+N PE, 50 Hz Weight: 780 kg Microprocessor-controlled temperature and program controller Jumo two-point controller Digital display of setpoint/actual temperature, plain text display Easy loading of the device floor via folding ramp Dimensions Interior: (W x H x D) 1000 x 1500 x 1000 mm Ihedoxbgt Dspfx Abcew External: (W x H x D) 1840 x 2389 x 1450 mm Financing through our bank is also possible. komplett-konzept.leasingo.de You can find more items—new and used—in our shop! International shipping costs on request!

Operating hours: 3,888 h, condition: good (used), Heraeus Xenotest 1200 CPS weathering tester Xenon device for testing the lightfastness and weather resistance of materials under simulated conditions Electrical connection Voltage: 400 V Nominal current: 50 A max. Connected load: 33 kVA max. Power consumption of xenon lamps: 2.8 - 6 kW per lamp Compensation: 3 capacitors, 50 uF each Ihsdsxal Haepfx Abcew Operating hours: 3888 Financing through our bank is also possible. komplett-konzept.leasingo.de You can find more items - new and used - in our shop! International shipping costs on request!

Condition: good (used), Large-scale system for climate tests with S!MCON control Ihodpfx Ajw U Sv Ejbcow Design The system consists of the following main components: - Walk-in, insulated test room - Air treatment room - Machine unit - Air conditioning system - Control cabinet Test room The fixtures in the test room are made of corrosion-resistant material. The test room can be illuminated, is walk-in, and has a condensate and cleaning drain. Air treatment room The air treatment room is located behind the air baffle in the insulated interior. It contains the following components necessary for temperature control and is accessible via easily removable panels. - Test room fans - Heat exchangers - Electric heaters - Ventilation and exhaust system - Temperature sensors In the air treatment room, the air is tempered (cooled/heated), humidified and dehumidified, and circulated by fans. The air is drawn in under the ceiling and expelled at floor level. Sensors The temperature and humidity sensors are located behind the air baffle in the air treatment room. Machine Unit The machine unit, consisting of refrigeration units, supplies the air treatment room with the required energy. Climate System The climate system consists of: - Steam humidifier - Dehumidification evaporator Technical Data Test chamber volume: approx. 32 m³ Direct temperature range: -40 to +100°C Temperature fluctuation over time in the center of the usable space: +/- 0.5 to +/- 1 Temperature change rate Heating: from -35°C to +50°C at 3 K/min Cooling: from +85°C to +85°C at 2 K/min from +80°C to -40°C at 1 K/min Data for climate testing Temperature range: 10 to 95°C Humidity range: 10 to 95% RH Dew point range: 5 to 93°C Temperature fluctuation: +/- 5°C Humidity fluctuation: +/- 3 to +/- 5% RH Cooling water specifications Connections Inlet: 2 x 1 1/2" RH Return: 2 x 1 1/2" RH Consumption at full load: max. 16 m³/h Maximum load on the test chamber floor: 10,000 N/m² Nominal voltage: 3/N / PE AC 400 V 50 Hz Nominal power: 97 kW Nominal current: 148 A Dimensions: Test chamber: Width 3.60 m, Height 2.20 m, Depth 5 m Climate chamber divided for transport at a specified location (approx. 2.50 m). Financing through our bank is also possible. komplett-konzept.leasingo.de Find more items – new and used – in our shop! International shipping costs on request!

Year of construction: 2010, condition: excellent (used), Binder KBWF 240 Growth Chamber Features: Temperature range: 0°C to 70°C Humidity range: 10% RH to 80% RH APT.line preheating chamber technology Adjustable fan speed Humidity control with capacitive humidity sensor and steam humidification Intuitive touchscreen controller with time-period and real-time programming with internal measurement recording Display via LCD color monitor Tight-closing inner door made of toughened safety glass (ESG) with special TIMELESS coating 2 stainless steel shelf racks Isdpevtlq Nofx Abcjhw Lead-through opening with 30 mm silicone plug, left side Class 3.1 temperature safety device (DIN 12880) with visual and audible temperature alarm Computer interface: Ethernet Door heating Maximum load: 51 - 100 kg External width: 925 mm Inner width: 650 mm External height: 1465 mm Inner height: 785 mm External depth: 800 mm Inner depth: 485 mm Internal volume: 201 - 300 l Weight: 214.00 kg Year of manufacture: 2010 Manufacturer price: €27,909.06 Financing through our bank is also possible. komplett-konzept.leasingo.de Find more items - new and used - in our shop! International shipping costs on request!

Year of construction: 1997, condition: good (used), Vötsch VTR 7033/S Temperature Test Chamber Manufacturer: Vötsch Type: VTR 7033/S Item No.: 60885637 Temperature Chamber Temp. Range: -70°C to +180°C Line Voltage: 400V Rated Current: 24A Rated Power: 9.5 kW Refrigerant (VK): R 404 A Refrigerant (TK): R 23 Year of Manufacture: 1997 TK 08 Ihsdsuuiv Ijpfx Abcjw Financing through our bank is also possible. komplett-konzept.leasingo.de Find more items - new and used - in our shop! International shipping costs upon request!

Condition: good (used), Vötsch VCS 4100 Climatic Test Chamber -40°C to +180°C Ihodpfouuiygex Abcew Manufacturer: Vötsch Type: VCS 4100 Temp. Range: -40°C to +180°C Line Voltage: 400 V Rated Current: 17 A Rated Power: 11 kW Refrigerant: R404A KK-07 Financing through our bank is also possible. komplett-konzept.leasingo.de Find more items - new and used - in our shop! International shipping costs upon request!

Condition: good (used), Heraeus Vötsch HC 4055 Temperature Test Chamber Manufacturer: Heraeus Vötsch Type: HC 44055 Temperature Chamber Temperature Range: +180°C Rated Voltage: 380V, +-10%, 3/N, 50Hz Rated Current: 13.5 A Rated Power: 9 kW Housing Dimensions: W 1065 x D 1560 x H 1890 (mm) Observation Window: Width x Height 350 x 640 mm Test Chamber: (L x D x H) approx. 800 x 795 x 855 mm Test Chamber Volume: 550 l Cabinet is air-cooled Caution Cabinet can only be operated as an oven. Refrigeration circuit empty and shut down. Air conditioning system shut down. Disconnected contactors: 03K2 Compressor 03K5 Condenser fan 15K6 Panel heater Solid state relay 21V4 Humidifier. Ijdpfxjuuilvs Abcohw Weight approx. 550 kg Financing through our bank is also possible. komplett-konzept.leasingo.de More items - new and used - can be found in our shop! International shipping costs on request!

Year of construction: 2002, condition: good (used), Vötsch VTSR 7034/S Climatic Test Chamber -70 to +180°C Ihedpfx Abeuuif Njcsw Manufacturer: Vötsch Type: VTSR 7034/S Test Chamber Capacity: 335 liters Climatic Test Chamber Temp. Range: -70 to +180°C Line Voltage: 3/N/PE AC, 400 V ±10%, 50 Hz Rated Current: 22 A Rated Power: 12.5 kW Refrigerant (VK): R 404 A Refrigerant (TK): R 23 Test Chamber Dimensions: Width 580 mm, Depth 765 mm, Height 750 mm External Dimensions: Width 870 mm, Depth 1595 mm, Height 1775 mm Year of Manufacture: 2002 TK-11 Financing through our bank is also possible. komplett-konzept.leasingo.de Find more items - new and used - in our shop! International shipping costs on request!

Year of construction: 1996, condition: excellent (used), Vötsch VSKZ 04/120/S Walk-In Climatic Test Chamber Manufacturer: Vötsch Type: VSKZ 04/120/S Temp. Range: -40°C to +120°C Line Voltage: 400V Rated Current: 95A Rated Power: 56 kW Refrigerant: R 404 A Year of Manufacture: 1996 External Dimensions: W 2850 x D 4100 x H 3080 mm SO-01 Financing through our bank is also possible. komplett-konzept.leasingo.de Find more items - new and used - in our shop! Isdpsuuigyofx Abcehw International shipping costs on request!

Condition: excellent (used), Weiss SC 1000/+20IU Corrosion Climatic Cycle Test Chamber Weiss SC 1000/+20 JU Corrosion Climatic Cycle Test Chamber The test system is a combination of a climatic test chamber with variable temperature and humidity and a corrosion test chamber with a salt spray test. At-risk metallic components are tested for corrosion in a time-lapse manner according to the relevant standards. Temperature Working Range Temperature: +20 °C ... +60 °C Temperature variation over time: +0.5 °C Climatic Working Range Temperature: +20 °C ... +60 °C Temperature variation over time: +0.5 °C Relative Humidity: 10...98 % RH Temperature variation over time: 3...5 % RH Dew point: +12 °C ... +59 °C Salt spray test SS (ambient temperature range +5 °C ... +50 °C) according to DIN 50 021 (salt spray via dual-fluid nozzle, 1.5 x 0.5 mV 80 cm h) Control Digital measurement and control system SIMCON/32*-Net with touchscreen control panel Interfaces - Serial interface RS 232 C - Parallel printer interface Operating modes adjustable via process controller: - Temperature mode - Air conditioning mode - Salt spray test - Direct spraying with saline solution - Condensate load - Flushing test chamber walls - Drying/ventilating test chamber Temperature sensor: Pt 100 resistance thermometer Humidity sensor: Psychrome fresh measuring device TFT (with forced humidification) Technical data SC 1000/+20 JU Usable space dimensions Iedpfx Absph U Dhjcjhw Height up to sloped roof approx. 1000 mm + roof approx. 350 mm Width approx. 1100 mm Width between heaters approx. 1000 mm Depth approx. 1000 mm Test room door made of glass, hinged on the left Height approx. 1350 mm Width approx. 1000 mm External dimensions including unit components and control cabinet Height approx. 2100 mm Width approx. 1450 mm Width with touch control panel approx. 1700 mm Depth approx. 2600 mm Floor load max. 100 kg Brine storage tank approx. 200 l, with level monitoring separately next to/behind the unit Height approx. 1000 mm Width approx. 600 mm Depth approx. 900 mm Electrical connection: 400 V Power rating: 13 kW Weight: 1300 kg Financing through our bank is also possible. komplett-konzept.leasingo.de Find more items – new and used – in our shop! International shipping costs on request!

Year of construction: 1990, condition: good (used), Weiss temperature test chamber WT 11-18 KWP 500/40  Spring, summer, autumn and winter - your products must be able to withstand different temperatures during manufacture, transport, storage and use. The temperature test chambers from Weiss Technik help you to test the influence of thermal conditions on the properties, function and service life of your products. Manufacturer: Weiss Technik Type: KWP 500/40 - 180 DU Designation: WT 11-18 Ihjdpfx Aoh Izh Iobcow Type: Temperature test chamber Test chamber volume: 500 ltr. Temperature range: -40°C to +180°C Outside dimensions: 110 cm wide, 173 cm deep and 204 cm high Dimensions inside: 80 cm wide, 85 cm deep and 85 cm high Pressure: 25 bar Voltage: 380 V Frequency: 50 Hz kVA: 4.7 Refrigerant: R 502 Year of manufacture: 1990 Condition: used complete factory closure, large selection of storage platforms, pallet racks, shelf racks, paternosters. High-quality industrial machines, lathes, grinding machines, hand machines Financing through our bank is also possible. komplett-konzept.leasingo.de Further articles - new and used - you will find in our shop! International shipping costs on request!

Condition: used, Amboss + Langbein Industrial Drying Oven Amboss + Langbein WTS 20 3B – 80°C – 400 V – 5 kW For sale is an industrial drying oven / heat drying cabinet from the manufacturer Amboss + Langbein, model WTS 20 3B. This unit is ideally suited for drying, heating, and tempering workpieces, components, or materials in workshop, industrial, or laboratory environments. The drying oven features digital temperature control, a safety thermostat, and a robust industrial design with multiple stainless steel shelves. Thanks to its castors, the unit is easily movable within the facility. Technical specifications: Manufacturer: Amboss + Langbein Model: WTS 20 3B Year of manufacture: 04/2010 Operating voltage: 400 V Frequency: 50 Hz Power: 5 kW Max. temperature: approx. 80°C Temperature control: digital Safety thermostat included Ijdpfex Uz Rtjx Abcjhw CE marking Dimensions / Weight (approx.): Height: 170–180 cm Width: 80–90 cm Depth: 70–80 cm Weight: 180–220 kg Condition: used Scope of delivery: (See photo) (Specifications and technical data subject to change and errors!) For further questions, feel free to contact us by phone.

Condition: excellent (used), Zwick / Roell Type: Z020 Allround-Line BT1-FR020TN.A50 Zwick / Roell Materials Testing Machine 20 kN Tensile & Compression Testing testXpert III For sale is a high-quality Zwick / Roell materials testing machine for professional tensile and compression testing of materials and components. The machine is suitable for metals, plastics, rubber, and many other materials and is typically used in laboratories, quality assurance, research, and education. Control is via PC using Zwick/Roell testXpert III software (data carrier & documentation included). Technical Data: Rated test force: 20 kN Test direction: tensile & compression Power supply: 230 V / 50–60 Hz / single-phase Power consumption: approx. 2.1 kVA Weight: approx. 150–180 kg Dimensions: approx. 856 × 650 × 1,545–2,114 mm Technical data (according to documentation & nameplate) Mechanics / Testing Nominal force: 20 kN Testing direction: tensile & compression Max. test frequency: 0.5 Hz Crosshead: servo-electric Positioning accuracy: < 1 µm Speed range: 0.0005 – 1,000 mm/min Dimensions & Weight: Total height: approx. 1,545 – 2,114 mm (depending on crosshead position) Total width: approx. 856 mm Total depth: approx. 650 mm Working area width: 440 mm Weight: approx. 150 kg (base unit) approx. 180 kg with typical configuration Electrical Data Power supply: 230 V AC Phases: single-phase (1PH, N, PE) Mains frequency: 50 / 60 Hz Current consumption: approx. 8–10 A Power consumption: approx. 2.1 kVA Plug: Schuko (CEE 7) Measuring & Control Electronics: Internal data acquisition: 500 Hz Data transmission to PC: adjustable 10–100 Hz Interface: RS232 (COM) Electronics housing protection class: IP32 Important note: 'The table shown in the photos is not included in the sale.' Condition: used Scope of delivery: (see picture) - Zwick / Roell materials testing machine (20 kN) - Electronics unit - PC workstation (monitor, PC – please see photos for condition) - 2 measurement modules (Delock units) - Zwick/Roell testXpert III software (data carrier) - Original operating and technical documentation - Various connection and interface cables (Specifications are subject to change and errors excepted!) Ihsdpfsx Up Igex Abcow If you have any questions, we will be pleased to assist you by phone.