Used Milling machines (window production) for sale (118)

Condition: excellent (used), Year of construction: 2013, Perfect condition, very little used. Comes with the blades shown in the photo. Cgob Esu Sk Stjp Nufot

Year of construction: 2008, Condition: excellent (used), 1-spindle copy router ALTECH LOGOS Cobjqu Ulds Ep Nufegt

Year of construction: 2001, Condition: used, Rotatable support table between 0° and 180°, allowing 3-sided processing in one clamping 12,000 revolutions per minute 4 pneumatically controllable copy pens Pneumatic material clamping Minimum quantity spray device Profile width: 30-120 mm Profile height: 50-100 mm Bar length: 490 - 3,000 mm Weight: about 350 kg Ceb Eovgdpdep Nufogt

Year of construction: 2016, Condition: excellent (used), Functionality: fully functional, Machine in working order - in continuous use. The center allows automatic processing with applied milling units, combined with innovations such as sliding tensioners and rotary grippers, of the most diverse types of profiles, such as for windows, doors and facades. Possibility to demonstrate the operation of the machine on site. Dimensions 20000x3000x4000mm. Cgebett N T As Ep Nufot

Year of construction: 2004, Condition: good (used), machine/vehicle number: 2004-3-11A, - Manual feed of the milling unit - Work table height adjustable via hand wheel - horizontal and vertical material tension - Cutter diameter up to 250 mm - max milling height 150 mm - max milling depth 80 mm Cob Eof E Higop Nufjgt - max milling length 305 mm - angle adjustable stop Li + Re 20 - 90 ° - milling spindle speed 4500 rpm - Drive 400 V 3.2 kW - Compressed air supply 6 - 8 bar - Air consumption per working cycle 10 l - Pneumatic profile clamping - Table underframe - Space requirement approx. W 1100 x H 1300 x D 700 mm - Weight approx. 200 kg

Year of construction: 2007, Condition: ready for operation (used), Sawing and processing machine Emmegi Quadra. Machine can still be seen in operation Csb Epjvy Ecro Nufogt

Condition: like new (used), Year of construction: 2018, Functionality: fully functional, CNC machine 0verHead M40 with CAN control Year of construction: 2018 Optical condition: minimal signs of use Technical condition: good Prefabricated CNC machine for direct sale! -Frame construction with protective housing -OverHead M40 - LES5 Travel range X/Y = 1210/910 -Please note that the travel range may vary due to any attachments -Control cabinet (1200x600x300mm) incl.4-axis control IMD CAN EC-Servo -X-axis motor EC60TM/ 200 Watt / 48 Volt -Y-axis motor 2x EC60TM/ 200 watts / 48 volts -Z-axis motor EC60TM/ 200 watts / 48 volts - with brake Cgeb Ep Nsui Hiyjufjt -iOP-TFT + swivel arm + keyboard + iPC 25-F5 with Win 10 IoT Enterprise LTSC 2019 -Z-clearance: 340mm -Z-axis travel 310mm -Spindle pitch X/Y-axis: 10mm/10mm -Spindle pitch Z-axis: 5mm -Slot clamping table 1600x1250 mm -Vertical sliding door: front -Underframe with decorative panels -Win-Remote software For operation, service and maintenance purposes, you require additional clearance when setting up the machine, based on the machine dimensions: -control cabinet side min. 1000mm -all other sides at least 500mm -to ceiling height min. 300mm Machine connection values (OverHead) -Electrical connection: 400V/16 50/60Hz -Air consumption of pneumatic options: (all approximate values) -Tool changer (WW): 50l/min pulse -Minimum quantity lubrication: 180l/min -Internal air cooling of milling spindle: 150l/min (depending on spindle type) -Cool-Min external: 150l/min (5µm and 1µm filter required) Blow-out at WW: 50l/min pulse (depending on spindle type and WW) -Compressed air connection: (min.7.5 bar permanent) 8 bar (dried and cleaned air according to ISO 8573-1, classes 2, 4, 3)) Mounted accessories: -iSA 2200 milling spindle with 2.2kW and automatic tool change function 4-fold tool change SK 20 -Minimum quantity cooling spray system Current equipment: -Please note that the travel distance may vary due to any attachments -Control cabinet (1200x600x300mm) incl.4-axis control IMD CAN EC-Servo -X-axis motor EC60TM/ 200 Watt / 48 Volt -Y-axis motor 2x EC60TM/ 200 Watt / 48 Volt -Z-axis motor EC60TM/ 200 watts / 48 volts - with brake -iOP-TFT + swivel arm + keyboard + iPC 25-F5 with Win 10 IoT Enterprise LTSC 2019 -Z-clearance: 340mm -Z-axis travel 310mm -Spindle pitch X/Y-axis: 10mm/10mm -Spindle pitch Z-axis: 5mm -Slot clamping table 1600x1250 mm -Vertical sliding door: front -Underframe with decorative panels -Win-Remote software For operation, service and maintenance purposes, you require additional clearance when setting up the machine, based on the machine dimensions: -control cabinet side min. 1000mm -all other sides at least 500mm -to ceiling height min. 300mm Machine connection values (OverHead) -Electrical connection: 400V/16A 50/60Hz Air consumption of pneumatic options: (all approximate values) -Tool changer (WW): 50l/min pulse -Minimum quantity lubrication: 180l/min -Internal air cooling of milling spindle: 150l/min (depending on spindle type) -Cool-Min external: 150l/min (5µm and 1µm filter required) Blow-out at WW: 50l/min pulse (depending on spindle type and WW) -Compressed air connection: (min.7.5 bar permanent) 8 bar (dried and cleaned air according to ISO 8573-1, classes 2, 4, 3))

Condition: excellent (used), Year of construction: 1999, Motor 400 V / 3.0 kW Speed 4500 rpm Cutter Ø 250 mm Cgob Ep Nusu E Tfpofjt Cutter holder shaft Ø 40 mm Milling width 305 mm Milling depth 80 mm Suction nozzle 80 mm Weight 210 kg

Year of construction: 1998, Condition: used, 3-sided machining in one setting Speed: 12,000 revolutions per minute 2 pneumatic tracers at the bottom, 1 tracer at the top Pneumatic material clamping Cebevcl S Ee Ep Nufogt Minimum quantity spray device Milling area vertical (top): 330 x 130 mm Milling area horizontally (from the front or rear): 220 x 95 mm Stroke: 110mm With side stops Weight: about 350 kg

Year of construction: 1997, Condition: used, - for window and door profiles made of aluminum and PVC - milling spindle length (mm) 90 - cutter diameter max (mm) 250 - milling depth up to (mm) 80 Cob Ep Nujlkfu Ujfogt - Milling width (mm) 330

Condition: good (used), Year of construction: 2009, machine/vehicle number: 9155, Offer 24245 Technical data: - Pneumatic feed of the milling unit - Work table height adjustable via handwheel - Horizontal and vertical material clamping - cutter diameter up to 300 mm - max. profile height 190 mm - max. milling depth 110 mm - max. milling length 400 mm - Angle-adjustable stop Li + Re 20 90 20 ° Cjb Epjtq Taks Nufegt - milling spindle speed 2800 rpm - Drive 400 V / 2.2 kw - Compressed air connection 6 - 8 bar - Air consumption per work cycle approx. 10 l - ELGO digital display for material cross stop - Pneumatic profile clamping - Spraying device - Space requirement approx. W 1100 x H 1500 x D 700 mm - Weight approx. 300 kg

Condition: excellent (used), Year of construction: 2000, End milling machines Type AKF 6/300 Motor 400 V / 3.0 kW Speed 3600 rpm Cutter Ø 300 mm Cutter holder shaft Ø 40 mm Milling spindle length 90 mm Milling width 375 mm Milling depth 105 mm Suction nozzle 80 mm Cgobsu E Rc Eo Ep Nufot Weight 225 kg

Year of construction: 2005, Condition: used, Maximum cutter diameter: 300 mm Manual milling feed Angle stop infinitely adjustable with locking points Max. release depth: 110 mm Max. profile height: 190 mm Max. cutter package height: 95 mm Pneumatic material clamps Ceb Ep Nou T N D Uoufsgt Spray device

Year of construction: 2000, Condition: good (used), machine/vehicle number: M 100-34 E3-D, Offer 24371 Technical data: - Machine for the production of closed cold-formed corners - Material thicknesses 0.8 to 2.5 mm - max. achievable shelf height see table - min. Workpiece length / min. workpiece width 120 mm - Production time per formed corner, independent of material 10 sec. - Drive 400 V / 4 kW - Control panel with E - foot switch - Space requirement station 1 approx. W 1100 x H 1650 x D 1100 mm - Weight of station 1 approx. 800 kg Csb Eeu Rartop Nufegt - Space requirement for station 2 approx. W 800 x H 1400 x D 900 mm - Weight of station 2 approx. 500 kg

Condition: excellent (used), Type AKF 6/250 Motor 400 V / 3.0 kW Speed 4500 rpm Cutter Ø 250 mm Cutter holder shaft Ø 40 mm Milling width 305 mm Milling depth 80 mm Suction nozzle 80 mm Weight 210 kg Cgsb Ep Neuf E R Ioufst

Year of construction: 1994, Condition: used, 3-sided machining in one setting Speed: 12,000 revolutions per minute Cgjb Ep Neu T Hiboufst 2 pneumatic tracers at the bottom, 1 tracer at the top Pneumatic material clamping Minimum quantity spray device Milling area vertical (top): 330 x 130 mm Milling area horizontally (from the front or rear): 220 x 95 mm Stroke: 110mm With side stops (dismantled) Weight: about 350 kg

Condition: good (used), Year of construction: 2012, machine/vehicle number: 00512S42, Offer 24379 Cgjb Ejud Ngqjp Nufot Precision deburring and beveling machine / edge trimming machine Technical data: Steel - Stainless steel - Aluminum - Plastics ,- Processing Deburring and faceting process is carried out with milling cutter Facing cutterhead with indexable inserts Motorized feed module Bevel angle adjustment 45 ° Continuously adjustable bevel width 0 to 10 mm Speed 2800 rpm Drive 400 V / 1.5 kW Space requirement approx. W 600 x D 750 x H 950 mm Weight approx. 90 kg

Condition: excellent (used), Year of construction: 1992, Type: AKF 250 Motor: 400V 2,2kW Speed: 2800 rpm Cutter O: 250mm Cutter holder shaft O: 40mm Milling width: 200mm Cgjb Ep Nusucq Nwjfjt Milling depth: 85mm Profile height: 150mm

Year of construction: 2009, Condition: good (used), 5-axis machining center with tool changer for aluminum or PVC profiles Cob Eetvrc Sep Nufsgt Max. processing length: 10,300 mm Travel Y-axis: 1150 mm Travel Z-axis: 715 mm A-axis swivel angle: 0° - 180° Angle C-axis: 0° - 180° Max. Speed 24,000 rpm Spindle power: 21 kW Tool changer with 13 standard and 7 special tools Saw blade diameter: 500 mm minimum quantity spraying Tensioner detection and automatic displacement 12 pneumatic material clamps Pendulum operation through two light barrier areas Manual control console Spindle in very good condition Loading is included in the price Weight: approx. 11,500 kg

Condition: excellent (used), Year of construction: 1991, Horizontal milling area after stop 230 x 90 mm Horizontal routing range according to copy template 230 x 90 mm Milling spindle speed 12,000 1/min. Clamping range of the profiles 180 x 130 mm Csb Ep Nst Ua H Deufegt Stroke 110 mm Voltage 230/400 V, 3~, 50 Hz Power output 0.74 kW Compressed air connection 7 bar Air consumption per work cycle 12 l without spraying, 24 l with spraying Length 720 mm, depth 650 mm, height 1,440 mm, weight 120 kg

Year of construction: 2003, Condition: used, 4-axis machining center with 8-way tool changer for aluminum or PVC profiles Max. processing length: 6,400 mm Y-axis travel: 850 mm Z-axis travel: 650 mm Swivel angle A-axis: 0° - 180° Max. Speed 21,000 rpm Windows operating system minimum quantity spraying Tensioner detection and automatic displacement chip conveyor belt in the bed Steam extraction Pendulum operation through two light barrier areas Cgobouwq S De Ep Nufjt Loading is included in the price Weight: approx. 4,500 kg

Condition: excellent (used), Year of construction: 2001, spindle speed (max.): 12,000 rpm, Copy router Power (kW) 1.5 Voltage (V) 400 Operating pressure (bar) 7 Milling motor speed (min-1) 12,000 Max. Workpiece cross-section W x H (mm) 200 x 100 Milling area L x W (mm) 315 x 130 Cob Eetqytijp Nufogt Immersion depth (mm) 200 Machine dimensions L x D x H (mm) KF 347 = 1,260 x 820 x 1,650 Weight (kg) approx. 350

Year of construction: 2007, Condition: used, Maximum cutter diameter: 300 mm Manual milling feed Angle stop infinitely adjustable with locking points Max. release depth: 110 mm Max. profile height: 190 mm Max. cutter package height: 95 mm Cgob Epeud Uvde Nufst Pneumatic material clamps Spray device

Year of construction: 2008, Condition: used, 5-axis machining center with 10-fold tool changer for aluminum or PVC profiles Max. machining length: 12,000 mm Y-axis travel: 1000 mm Z-axis travel: 650 mm A-axis swivel angle: 0° - 180° Angle C-axis: 0° - 180° Max. speed 24,000 rpm. Weight: approx. 11,000 kg minimum quantity spraying Tensioner detection and automatic displacement 20 pneumatic material clamps Pendulum operation through two light barrier areas Manual control console conveyor belt Cgjb Ejmdyh Dsp Nufst Many tool holders, including saw blade Loading is included in the price Machine can be tested in our warehouse The spindle was completely overhauled by the manufacturer (cost over €15,000)

Year of construction: 1993, Condition: used, Cutter diameter: 300 mm Max. release width: 350 mm Max. release depth: 110 mm Max. profile height: 150 mm Feed length: 500 mm Stop between 20° - 90° - 20° Ceb Ep Nsrv A Hmjufjgt Pneumatic workpiece clamps Minimum quantity spray device Manual feed Weight: approx. 280 kg