Used planing & moulding machines for sale (498)

Condition: not inspected (used), Year of construction: 2010, functionality: unexamined, workpiece height (max.): 120 mm, workpiece width (max.): 230 mm, controller model: Siemens Simatic Panel Touch, workpiece length (max.): 8,483 mm, TECHNICAL DETAILS Minimum working height: 6 mm Maximum working height: 120 mm Minimum working length: 370 mm Maximum working length: 8,483 mm Iedpfx Aboyqx T Ascoap Minimum working width: 25 mm Maximum working width: 230 mm Maximum feed speed: 12 m/min Rubber-coated feed rollers: 1 Toothed feed rollers: 4 Total number of rollers: 5 MACHINE DETAILS Control system: Siemens Simatic Panel Touch Processing unit 1 Motor power: 4 kW Shank diameter: 40 mm Shank length: 240 mm Processing unit 2 Motor power: 4 kW Shank diameter: 40 mm Shank length: 240 mm Max. tool diameter: 4 mm Processing unit 3 Motor power: 4 kW Shank diameter: 40 mm Shank length: 240 mm Processing unit 4 Motor power: 5.5 kW Shank diameter: 40 mm Shank length: 240 mm Automatic chip ejection power: 24 kW EQUIPMENT Safety standard: EC marking The machine is sold and delivered in its actual and legal condition (“as seen and approved”) on the basis of photo documentation and technical/commercial documents of descriptive nature. The buyer has the right to inspect the goods prior to collection and assumes responsibility for installation, securing, and operation of the machine at the destination. External reference: 7243

Condition: excellent (used), Four-side planer Weinig Profimat 26S Working width: 230 mm Working height: 130 mm Number of spindles: 6 Spindle configuration: Bottom Left Right Right Isdpfoyvhkiox Abcsap Top Bottom Feed speed adjustable by variator CE certificate Technical documentation

Condition: ready for operation (used), functionality: fully functional, Gabbiani GS120 four-sided planer/moulder with material feeder Working width: 120 mm Working height: 80 mm Number of spindles: 7 Spindle arrangement: Bottom Iodpfx Aeyr Nu Hobceap Left Right Top Bottom Top Sanding unit Caterpillar feed Sacot material feeder The machine is suitable for dry wood, wet wood, as well as for short workpieces

Condition: excellent (used), CATALOG NUMBER 7665 Technical data: - Shaft width: 510 mm - Planing shaft (2 knives installed), 4-knife shaft - Maximum thickness of material for thicknessing: 200 mm - Maximum thickness of workpiece on side heads (3-sided): 100 mm – From above: - Anti-kickback fingers - Serrated feed roller - Planing shaft - Pressure beam - Smooth outfeed roller – From below: - Adjustable rollers in lower table: 2 pcs - Guide bar - Lateral pressure from the side – From the rear: Iasdpfx Aeytf Nvebcsp - 2 side spindles + pressure units - Spindle height: 100 mm - Maximum spindle spacing: 510 mm - Spindle diameter: 30 mm - Spindle adjustment: left/right - Motor: 2 × 1.5 kW - Two feed speeds - Main motor: 7.5 kW - Extraction port: 2 × 100 mm - Overall dimensions (L/W/H): 1800 × 1250 × 1000 mm - Weight: 1,070 kg ADVANTAGES – Made in Poland – 4-knife shaft – Very good condition – Used planer Net price: 13,900 PLN Net price: 3,300 EUR Net price calculated at an exchange rate of 4.2 PLN/EUR (in case of significant exchange rate fluctuations, the price may be subject to change)

Condition: excellent (used), CATALOG NUMBER 7556 Technical specifications: - Min / max working width: 20 / 240 mm - Min / max working height: 8 / 160 mm - Number of spindles: 4 1) Bottom horizontal, 240 mm, 5.5 kW 2) Right vertical, 160 mm, 5.5 kW Iedpfoytdmyox Abcjap 3) Left vertical, 160 mm, 5.5 kW 4) Top horizontal, 240 mm, 7.5 kW - All heads adjustable vertically and horizontally - Spindle diameter: 40 mm – Top: - 6 powered infeed rollers, toothed (including 2 double rollers) - 2 powered outfeed rollers, smooth rubber – Bottom: - Lateral pressure before and after the roller on the lower table - Powered infeed toothed roller, swiveling, on the lower table before the first spindle - 2 pneumatic lateral pressure units - Powered outfeed roller, smooth metal - All rollers pneumatically loaded - Infeed table length: 2180 mm - Table adjustable vertically - Centralized lubrication - Electric thickness adjustment - Lifting motor: 0.75 kW - Stepless feed speed adjustment via inverter: 6–30 m/min - Feed motor: 3 kW - Feed through Cardan shafts - Enclosed in a cabin + - Extraction outlet diameter: 4 x 150 mm - Dimensions (L x W x H): 3750 x 1750 x 1800 mm - Weight: 3300 kg ADVANTAGES – Four-head configuration – Ideal for wet and dry wood – Used machine, excellent condition Net price: 75,900 PLN Net price: 18,070 EUR (based on 4.2 EUR exchange rate) (Prices may change with significant exchange rate fluctuations)

Condition: ready for operation (used), Year of construction: 2019, operating hours: 100 h, functionality: fully functional, machine/vehicle number: 20190824, feed rate X-axis: 33 m/min, overall weight: 2,800 kg, rotational speed (max.): 6,800 rpm, workpiece height (max.): 100 mm, workpiece width (max.): 180 mm, Four-side planer with only 100 operating hours! TECHNICAL DETAILS Material width: 20-180 mm Material thickness: 8-100 mm Infinitely adjustable feed speed: 8-33 m/min Spindle diameter: 40 mm Iaodpfx Abjyu Ii Iecsp Spindle 1 - bottom: Ø125 mm (Ø152 mm groove cutter), 4 kW Spindle 2 - right: Ø115-170 mm, 4 kW Spindle 3 - left: Ø115-170 mm, 4 kW Spindle 4 - top: Ø105-150 mm, 5.5 kW Spindle speed: 6,800 rpm Roller feed system dimensions: Ø140x35x50 mm Extraction connection diameter: 4 x 120 mm MACHINE DETAILS Feed motor power: 3 kW Total electrical connection load: 21 kW Operating voltage: 400 V, 50 Hz, 3-phase Required air pressure: min. 6 bar Dimensions & Weight Dimensions (L x W x H): 3,040 x 1,600 x 1,680 mm Weight: 2,800 kg Feed table length: 2,000 mm Operating hours: 100 h EQUIPMENT Solid cast and welded steel frame Chromed worktable for secure material feeding Side guide rollers for material with pneumatic drive Professional cardan shaft drive for the feed system Manual central lubrication unit Radial and axial adjustment of working spindles with mechanical indicators for precise positioning Electric adjustment of working height Ergonomically positioned control panel according to EU standard

Condition: excellent (used), Catalogue number: 7817 TECHNICAL DATA DDCA - Double-End Tenoner - Minimum panel width: 180 mm - Maximum panel width: 850 mm - Minimum panel height: 10 mm - Maximum panel height: 45 mm - Spindle diameter: 30 mm - Maximum blade diameter: 250 mm - 4 blades included 5 spindles: Left side: 1) Top vertical spindle 2.2 kW 2) Bottom horizontal spindle 2.2 kW Right side: 1) Bottom vertical spindle 2.2 kW 2) Top vertical spindle 2.2 kW 3) Bottom horizontal spindle 2.2 kW - Spindles adjustable up/down and left/right - 2 material hold-downs - Stepless feed speed adjustment: 0–10 m/min - Central lubrication via oil pump - Pump motor: 2.2 kW - Extraction port diameter: 5 x 100 mm - Dimensions (LxWxH): 1900 x 2230 x 1530 mm DDGA - Four-Sided Planer - Maximum panel width: 130 mm - Panel height: 10–60 mm - Minimum workpiece length: 200 mm Spindle arrangement: 1) Bottom spindle 5.5 kW 2) Right spindle 5.5 kW 3) Left spindle 5.5 kW 4) Top spindle 5.5 kW - Spindles adjustable up/down - Top and bottom spindle diameter: 40 mm - Right and left spindle diameter: 30 mm - 4 feed speeds: 13/20/26/40 - Central chain lubrication via oil pump - Extraction port diameter: 4 x 120 mm - Dimensions (LxWxH): 3200 x 1370 x 1830 mm DBCA - Tenoner Infeed Conveyor - Maximum feed speed: 40 m/min - Maximum panel width: 150 mm Iasdpfx Aboxwytiocjp - Motor: 0.55 kW - Overall dimensions (LxWxH): 2320 x 600 x 1150 mm DBGA - Strip Infeed Conveyor - Strip length: 200–600 mm - Strip width: 30–120 mm - Strip thickness: 10–40 mm - Stepless feed speed adjustment: 10–40 m/min - Motor: 0.75 kW - Overall dimensions (LxWxH): 1500 x 500 x 980 mm - Total weight: approx. 4900 kg – Polish production – DTR technical documentation included – 5 spindles – Unpainted – Very good condition – Used machine Net price: 63,900 PLN Net price: 15,200 EUR, according to the exchange rate of 4.2 EUR (Prices may vary according to exchange rate fluctuations) * MAR-MASZ guarantees the quality of your purchase, but is not an authorized representative of the manufacturer. All trademarks and names are used purely for informational purposes to allow identification of the goods. We only resell items that have already been put on the market by the manufacturer. We have no business relationship with the manufacturer.

Condition: excellent (used), Catalogue number 6338 TECHNICAL DATA - Maximum working width: 230 mm - Maximum working height: 160 mm 7 spindles: 1) Bottom horizontal, 230 mm, 5.5 kW 2) Right vertical, 160 mm, 5.5 kW 3) Left vertical, 160 mm, 5.5 kW 4) Top horizontal, 230 mm, 7.5 kW 5) Top horizontal, 230 mm, 7.5 kW 6) Bottom horizontal, 230 mm, 7.5 kW 7) Universal 360°, 230 mm, 7.5 kW - All spindles adjustable up/down and right/left - Spindle diameter: 40 mm - All spindles equipped with brake - Spindle speed: 6,000 rpm From above: - 6 geared, steel infeed rollers including 2 double rollers - 4 rubber outfeed rollers including 1 double roller - 3 outfeed pressure rollers From below: - Side pressure roller at infeed - Geared, swiveling, steel infeed roller in lower table - 3 smooth steel feed rollers - Pneumatically adjustable rollers - Length of infeed table: 1,190 mm - Centralized table lubrication - Electric planer thickness adjustment - Lifting motor: 0.56 kW - Stepless feed rate adjustment via inverter: 6–24 m/min - Feed motor: 3.7 kW - Cardan shaft roller feed - Enclosed in cabin - Extraction port diameter: 7 x 125 mm - Dimensions (L x W x H): 5,100 x 2,070 x 1,900 mm - Approximate weight: 5,000 kg ADVANTAGES - 7 heads - Universal spindle - Ideal for both wet and dry wood - Spindles equipped with brakes - Full technical documentation (DTR) - Used planer, in very good condition Net price: 149,900 PLN Net price: 35,690 EUR at an exchange rate of 4.2 EUR (Prices may vary with larger fluctuations) Ijdpfx Absx Rc Hnjcjap

Condition: excellent (used), CATALOG NUMBER 6575 TECHNICAL DATA - Max. workpiece width: 230 mm - Max. workpiece height: 170 mm - 7 spindles: 1) Lower horizontal, 230 mm, 11 kW 2) Right vertical, 170 mm 3) Left vertical (spindle 2 & 3), 170 mm, 11 kW 4) Right horizontal, 170 mm, 5.5 kW 5) Upper horizontal, 230 mm, 11 kW 6) Lower horizontal, 230 mm, 7.5 kW 7) Universal, 230 mm, rotatable 360°, 7.5 kW - All spindles adjustable up/down, left/right - Spindles 3 and 5 electrically adjustable - ATS system - Spindle diameter: 40 mm - Electric brakes - From above: 4 driven infeed rollers, toothed, including 1 double roller - From above: 1 double rubber driven infeed roller - From above: 1 double rubber driven outfeed roller - From below: 2 metal driven feed rollers, smooth - From below: 1 double rubber driven feed roller - Feed via Cardan shafts - Pneumatically loaded feed rollers - Infinitely variable feed speed: 6-24 m/min - Feed drive motor: 5.5 kW - Electric thickness adjustment - Body lifting motor: 0.55 kW - Central table lubrication - Extraction port diameter: 7 x 140 mm Isdsyr Ry Djpfx Abceap - Dimensions (L/W/H): 5800 x 2050 x 1850 mm - Weight approx.: 4500 kg FEATURES – German-made, WEINIG brand – 7-head planer – Universal spindle – Equipped with ATS – For wet and dry timber – Used planer, in very good condition Net price: 159,900 PLN Net price: 38,070 EUR Net price calculated at exchange rate of 4.2 PLN/EUR (Price may change in case of significant exchange rate fluctuations)

Condition: excellent (used), WEINIG HYDROMAT 22 AL Four-Sided Planer - Maximum workpiece width: 220 mm - Maximum workpiece height: 130 mm - 8 spindles: 1) Lower horizontal: 220 mm, 5.5 kW 2) Right vertical: 130 mm, 7.5 kW 3) Left vertical: 130 mm, 7.5 kW 4) Right vertical: 130 mm, 5.5 kW 5) Upper horizontal: 220 mm, 11 kW – 5th spindle with electric height adjustment (up/down) 6) Lower horizontal: 220 mm, 5.5 kW 7) Lower horizontal: 220 mm, 5.5 kW – 7th spindle with support + Jointer system (cutterhead sharpening) 8) Universal spindle: 220 mm, 360° adjustable, 7.5 kW - All spindles adjustable up/down, left/right - Spindle diameter: 40 mm - From above: - 6 dual toothed feed rollers + 1 single roller - 3 dual smooth rubber outfeed rollers + 3 single rollers - Meter counter - From below: - Swiveling toothed steel infeed roller integrated in lower table - 3 smooth steel feed rollers - Feed via cardan drive rollers - Pneumatically-tensioned feed rollers - Stepless feed speed adjustment + 2-speed gearbox: 10–60 m/min - Feed motor: 10 kW - Electrically adjustable planing thickness - Lifting motor: 0.75 kW - Central table lubrication - Extraction port diameters: 5 x 140 mm, 3 x 120 mm - Machine dimensions (LxWxH): 4680 x 1780 x 1850 mm Iaodpfoya Hiqsx Abcep - Control cabinet dimensions (on pallet): 1020 x 1000 x 2230 mm - Approx. weight: 5,000 kg Feeder with centering device: - Roller width: 450 mm - 1 toothed powered infeed roller - 22 smooth powered rollers - Adjustable upper pressure - Feeder length: 9,020 mm - Stepless speed adjustment: 10–60 m/min - Motor: 0.75 kW - Dimensions (LxWxH): 9,020 x 790 x 1,150 mm Net price: 180,000 PLN Net price: 42,860 EUR (based on 4.2 EUR/PLN exchange rate) (Prices subject to change depending on exchange rate fluctuations)

Condition: used, Year of construction: 2001, Number of spindles 5 St. Working width 230 mm Working height 120 mm Length of the planing table 2000 mm Feed speed 5-24 m/min. Weinig Profimat 26 S Four-Sided Planer ..... Summary: - 5 spindles (bottom, right, left, top, bottom) - Common control of the right spindle (axial), top spindle (axial), and glass bead discharge. - Working width (with a 125 mm tool circle) 20 - 230 mm - Working height (with a 125 mm tool circle) 8 - 120 mm Detailed description: 1. SPINDLE ..... - First lower horizontal spindle - Motor with brake 5.5 kW - Diameter 40 mm - Speed ??6,000 rpm - Tool circle 125 - 145 mm - Axial travel 5 mm - Rebating device - Hardened table insert in front of the 1st lower spindle 2. SPINDLE ..... - First right vertical spindle - Motor with brake 7.5 kW Shared motor with left vertical spindle - Diameter 40 mm - Speed ??6,000 rpm - Tool circle 15 mm below table level 100 - 200 mm - Tool circle 40 mm below table level 100 - 180 mm - Max. tool diameter behind stop level 180 mm - Max. groove depth 35 mm - Axial travel 40 mm - Right spindle pneumatically controlled axially (40 mm) via selector switch, max. saw blade diameter 180 mm - Insertion segment 125 mm 3. SPINDLE ..... - First left vertical spindle - Shared motor with 1st right vertical spindle - Diameter 40 mm - Speed ??6,000 rpm - Tool swing circle 15 mm below table level 100 - 200 mm - Tool swing circle 40 mm below table level 100 - 180 mm - Max. Tool diameter behind stop plane 180 mm -Maximum groove depth 35 mm -Axially travel 40 mm -Insert segment 125 mm Iasdpfx Aoyuzczsbcep 4. SPINDLE ..... -First upper horizontal spindle -Motor with brake 7.5 kW -Diameter 40 mm -Speed ??6,000 rpm -Tool swing circle 112 - 200 mm -Maximum groove depth 35 mm -Axially travel 40 mm -Upper horizontal spindle pneumatically controlled axially (40 mm) via selector switch, Max. saw diameter 200 mm -Split pressure shoe in front of upper spindle, adjustable to the tool swing circle and pivoting away from the tool, spring-loaded. - Pneumatically adjustable up/down glazing bead discharge to the upper spindle 5. SPINDLE ..... - Second lower horizontal spindle - Motor with brake 4.0 kW - Diameter 40 mm - Speed ??6,000 rpm - Tooling circle 112 - 200 mm - Maximum groove depth 15 mm All groove spindles dynamically balanced for high concentricity Common control of the right spindle (axial), upper spindle (axial) and glazing bead discharge FEED SYSTEM ..... - Mechanical feed, infinitely variable 5 - 24 m/min. With brake – 2.2 kW -Feed roller in front of the first lower tool, pneumatically controlled "up-down" -Durofer pointed tooth rollers (Weinig patent) with depth limiter and self-cleaning -Adjustment travel of the feed rollers relative to the left spindle, axial 35 mm MACHINE ELECTRICAL TECHNOLOGY ..... -Operating voltage 400 volts (voltage range 380–420 volts), 50 Hz -Electrical design according to DIN VDE 0113, electrical equipment of industrial machines EN 60204, IEC 204-1 Other electrical regulations are not c...

Condition: good (used), Year of construction: 1996, functionality: fully functional, machine/vehicle number: 226-60368, total width: 2,200 mm, total height: 2,000 mm, total length: 4,500 mm, overall weight: 4,000 kg, WEINIG PROFIMAT 23 Four-Side Planer - Operating voltage: 380 V - Frequency: 50 Hz - Spindle length – working spindle: 247 mm, jointer spindle: 130 mm, left spindle: 130 mm, top spindle: 240 mm - Tool length – surfacing spindle: 240 mm, jointer spindle: 130 mm, left spindle: 130 mm, top spindle: 240 mm - Spindle diameter on surfacing, jointer, left, and top spindles: 40 mm each - Adjustment travel (axial): 5 mm, radial: 15 mm; jointer spindle: 40 mm axial, 50 mm radial; left spindle: 40 mm axial, 200 mm radial; top spindle: 40 mm axial, 120 mm radial - Max. cutting circle behind fence: 200 mm - Max. cutting circle – working spindle: 145 mm, jointer spindle: 200 mm, left spindle: 200 mm - Distance below table, working spindle: 20 mm, jointer spindle: 15 mm, left spindle: 15 mm - Minimum cutting circle diameter, working spindle: 125 mm, jointer spindle: 100 mm, left and top spindle: 100 mm - Maximum cutting circle diameter, working spindle: 145 mm, jointer spindle: 200 mm, left spindle: 200 mm, top spindle: 200 mm - Spindle speed on all spindles: 6,000 rpm - Extraction connection on all spindles: 140 mm - Max. chip removal on all spindles: 10 mm Iaodpfoyu Iwlsx Abcop - 2nd bottom spindle – clamping length: 240 mm, tool length: 240 mm, spindle diameter: 40 mm - Adjustment travel: 35 mm axial, 68 mm radial - Max. cutting circle below table: 200 mm, min. 18 mm - Cutting circle diameter: min. 100 mm, max. 200 mm - RPM: 6,000 - Motor power: 4 – 11 kW - Extraction diameter: 140 mm - Chip removal: from 0 to 0.5 mm - Surfacing table length: 2000/2500 mm - Surfacing table adjustment range, up/down: 10 mm - Jointers fence adjustment range: 10 mm Attention: The item must be collected bindingly between 01. and 10.06.2016, on a date to be arranged. FCA D-75433 Maulbronn – loaded onto truck

Condition: excellent (used), functionality: fully functional, Four-sided planer Weinig Profimat 26 Fortec + EM11 Working width: 230 mm Working height: 130 mm Number of spindles: 5 Spindle arrangement: Bottom 5.5 kW Left Right 11 kW Top 7.5 kW Iaodpoyn Et Rsfx Abcjp Bottom 5.5 kW Material feeder: Weinig EM 11 Pneumatic pressure rollers divided into 3 sections Feed speed adjustable via frequency inverter: 5–24 m/min CE certificate Technical documentation

Condition: excellent (used), Weinig Profiamt 22N four-sided planer Iaodpfx Abov If I Docep Working width 230mm Working height 120mm Number of spindles 5 1.Bottom 4kw 2.Right 3.Left 5.5kw 4.Top 5.5kw 5.Universal 4kw Pneumatic material clamps Feed speed regulated by means of a variator 6-22m/min Feed motor 2.2kw Automatic lubrication of the worktop Air cushion in the worktop Length of the material insertion table 1970mm

Condition: good (used), Leadermac Speedmac 923 Maximum width 230mm Maximum thickness 160mm 9x spindles 6,000 RPM 4x side heads !!! Bottom 11kW Right 11kW Left 11kW Top 11kW outboard bearing Right 11kW Left 11kW Top 11kW outboard bearing Bottom 11 kW outboard bearing Bottom 22 kW outboard bearing Possible to add jointers as needed. Iedpfoxcft Ssx Abcsap CNC position on spindles 3,4,6 and 7. Large quantity of Hydro tooling included!!! 11kW feed motor. 6-70m/min (possible to increase if needed). Automatic lubrication system. Possible to supply with moulder infeed and outfeed as needed. Possible to offer tooling if needed.

Condition: like new (used), Year of construction: 2005, functionality: fully functional, working width: 230 mm, planing height: 120 mm, planer shaft diameter: 40 mm, workpiece height (max.): 120 mm, Weinig Unimat 300 — 4-sided planer 230 x 120 mm Although from 2005, this machine is practically like new! Rarely have we seen one so little used. Iaedpfx Abjyvhcfecsp Looking for an almost-new 4-spindle planer but don’t have the budget for a new one? This Unimat 300 is the perfect pick!

Condition: good (used), Year of construction: 2003, functionality: fully functional, Weinig Hydromat 23C four-side planer moulder Manufacturer: Weinig Model: Hydromat 23C Year of manufacture: 2003 Spindle configuration: 5 spindles Configuration: bottom, right, left, top, bottom Machine description: For sale: Weinig Hydromat 23C four-side planer moulder, year 2003, equipped with 5 spindles in bottom, right, left, top, bottom configuration. This is a solid and proven industrial machine designed for four-side planing of solid wood, production of moulded parts, timber sections, strips, joinery components and furniture elements. The Hydromat 23C is known for its stable construction, good machining precision and suitability for continuous industrial production. Typical specifications for this series include working width up to 230 mm and working height up to 160 mm. Market listings for Hydromat 23C also show versions with mechanical or hydraulic feed and variable feed speed. Technical data: - Machine type: four-side planer / moulder - Number of spindles: 5 - Spindle arrangement: bottom, right, left, top, bottom - Working width: up to approx. 230 mm - Working height: up to approx. 160 mm - Series configuration range: from 5 to 10 spindles - Standard feed speed: approx. 6–36 m/min Features and advantages: - Solid industrial construction - Proven Weinig technology - Good machining quality - Suitable for continuous production - Good solution for serial timber processing - Universal 5-spindle arrangement for planing and profiling Condition: Used machine Note: Technical details may vary depending on the exact machine configuration, motor powers, spindle diameters, feed system and optional equipment. Isdpfoyu Uqrsx Abcoap

Condition: excellent (used), CATALOG NUMBER 6674 TECHNICAL SPECIFICATIONS - Max planing width: 150 mm - Max planing height: 130 mm 7 spindles: 1) bottom horizontal, 150 mm, 3 kW 2) right vertical, 130 mm, 3 kW 3) left vertical, 130 mm, 4 kW 4) top horizontal, 150 mm, 4 kW 5) bottom horizontal, 150 mm, 3 kW 6) right vertical, 130 mm, 4 kW - Spindle diameter: 35 mm (all spindles) - All spindles adjustable up/down and right/left - 4 driven toothed feed rollers from above - 4 top rubber outfeed feed rollers Iaodsx Sq Dqopfx Abcsp - 2 top pressure rollers - Electric planing thickness adjustment: 0.25 kW - Infeed table length: 1970 mm - Central table lubrication - Stepless feed speed adjustment - Feed motor: 1.5 kW - Extraction port diameters: 6x120 mm - Dimensions (LxWxH): 4000x1300x1600 mm - Weight: approx. 3000 kg – German manufacture – 6-head machine – Used moulder/planer in very good condition Net price: 36,900 PLN Net price: 8,790 EUR Net price based on 4.2 PLN/EUR exchange rate (Significant currency fluctuations may cause price adjustments)

Condition: excellent (used), Catalogue number: 7715 TECHNICAL SPECIFICATIONS - Maximum workpiece width: 220 mm - Maximum workpiece height: 130 mm - 8 spindles: 1) Bottom horizontal 220 mm 5.5 kW 2) Right vertical 130 mm 7.5 kW 3) Left vertical 130 mm 7.5 kW Iodpfew Ipcvex Abcjap 4) Right vertical 130 mm 5.5 kW 5) Top horizontal 220 mm 11 kW – 5th spindle electrically adjustable up/down 6) Bottom horizontal 220 mm 5.5 kW 7) Bottom horizontal 220 mm 5.5 kW – 7th spindle with support + Jointer system (cutterhead sharpening) 8) Universal 220 mm, 360° adjustable, 7.5 kW - All spindles adjustable vertically and laterally - Spindle diameter: 40 mm Feed system (top): - 6 double-toothed infeed rollers, driven, + 1 single roller - 3 double smooth rubber outfeed rollers, driven + 3 single rollers - Digital length counter Feed system (bottom): - Swivelling toothed steel infeed roller integrated into lower table - 3 smooth steel feed rollers - Feed drive via Cardan rollers - Pneumatic pressure rollers - Stepless feed speed adjustment + 2-speed gearbox: 10–60 m/min - Feed motor: 10 kW - Electric thickness adjustment - Body lifting motor: 0.75 kW - Centralised table lubrication - Extraction connection diameters: 5x140 mm, 3x120 mm - Machine dimensions (LxWxH): 4680x1780x1850 mm - Control cabinet dimensions (on pallet): 1020x1000x2230 mm - Weight: approx. 5000 kg ADVANTAGES - Equipped with 8 cutterheads - Universal spindle - Ideal for wet and dry timber - Made in Germany, WEINIG brand - Unpainted (original finish) - Very low operating hours - Used thickness planer, like new Net price: 165,900 PLN Net price: 39,500 EUR (based on exchange rate 4.2 EUR) (Prices may change with significant exchange rate fluctuations)

Condition: excellent (used), Year of construction: 1998, TECHNICAL DATA - Max. working width: 230 mm - Max. working height: 130 mm - 5 spindles: 1) Lower horizontal spindle, 230 mm, 4 kW 2) Right vertical spindle, 130 mm 3) Left vertical spindle, 130 mm (2nd and 3rd spindle), 7.5 kW 4) Upper horizontal spindle, 230 mm, pneumatically adjustable front/rear 5) Lower horizontal spindle, 230 mm, 4 kW - All spindles adjustable (up/down, right/left) - All spindles with electric brake - 4 upper feed rollers, toothed, 2 of which are double - 2 upper outfeed rollers, rubber-coated and smooth - Feed via cardan shaft - Feed motor: 2.2 kW - Operating pressure: 6-10 bar - Planing thickness adjustment - Table lubrication - Infeed table length: 1980 mm Iodpfxsyutyfj Abcjap - Extraction port diameter: 5x140 mm - Dimensions (L/W/H): 4000 x 1800 x 1700 mm - Weight approx. 3,300 kg Ex works - Available at short notice -

Condition: excellent (used), functionality: fully functional, Weinig Powermat 500 four-sided planer Working width 230mm Working height 160mm Number of spindles 6 Spindle arrangement: Bottom 5.5kw 8000r.p.m Right 5.5kw 8000r.p.m Left 7.5kw 8000r.p.m Top 7.5kw 8000r.p.m Bottom 7.5kw 8000r.p.m Universal 5.5kw 8000r.p.m Spindle #6 equipped with power lock system Feed speed adjustable by inverter up to 30m/min Isdpfx Ajvfr Rgjbcjap Pulling rollers in the worktop (1 grooved roller for wet wood) Electro-motorized positioning of height and working width Pneumatic material stops Drive on karda shafts Total power 41kw Year of production 2005 CE certificate

Condition: excellent (used), Weinig H30N four-sided planer Working width 300mm Working height 200mm Number of spindles 5 Spindle arrangement: Bottom 11kw Right 11kw Left 11kw possibility to change spindle angle up to 90° Right 7.5kw ability to change spindle angle up to 45° Top 11kw Feed speed adjustable with variator up to 22m/min Feed motor 9kw Drive in work table: - 3 rows of grooved drawing rollers in front of the first head - 5 rows of smooth pulling rollers Top drive: - 9 rows of pulling rollers Iajdpfxjumtlqe Abcjp Weight of the machine 6100kg Machine dimensions 470x190x160cmH

Condition: excellent (used), Weinig H30N four-sided planer Working width 300mm Working height 200mm Number of spindles 5 Spindle arrangement: Bottom 11kw Right 11kw Left 11kw possibility to change spindle angle up to 90° Right 7.5kw ability to change spindle angle up to 45° Top 11kw Feed speed adjustable with variator up to 22m/min Feed motor 9kw Drive in work table: Isdsumtlkjpfx Abcoap - 3 rows of grooved drawing rollers in front of the first head - 5 rows of smooth pulling rollers Top drive: - 9 rows of pulling rollers Weight of the machine 6100kg Machine dimensions 470x190x160cmH

Condition: excellent (used), Weinig Profimat 23 Fortec four-sided planer Working width 230mm Iaodpfxsumxqrj Abcop Working height 140mm Number of spindles 6 Arrangement of spindles Bottom 7.5kw Right Left 11kw Top 7.5kw Top 5.5kw Bottom 5.5kw Pneumatic pressures Feed speed adjustable on variator Drive on cardan shafts CE certificate

Condition: excellent (used), HM window machine 3 x right 4x left top grinding top bottom Iaedpfxot Hk Ats Abcop