Used other metal processing machinery for sale (527)

Year of construction: 2012, condition: used, Control Siemens In our opinion, the machine is in good used condition and can be inspected under power by appointment. There are 2 identical machines available. Technical features: - PLC controlled, Siemens Accessories, tools and clamping devices shown are only part of the scope of delivery if this is noted in the additional information. Bsdpfx Ajxqrg Ijd Dswl Changes and errors in the technical data and information as well as Subject to prior sale!

Year of construction: 2015, condition: used, control Siemens number of workstations 4 Stück CAB unit 2 Stück Workpiece spindle: 4 Stück Height in the middle of the circular indexing tabl 1396 mm tail stock 4 Stück Workpiece spindle speed (3x) 3000 1/min Speed ??CAB unit (2x) 6000 1/min Rotary table speed (1x) 1435 1/min Workpiece spindle drive 9 Nm CAB unit 6 Nm round table 0,75 kW In our assessment, the machine is in good condition and can be inspected under power by appointment. The machine was used for cam machining. Comprehensive operating instructions are available. See the installation plan in the PDF document. Accessories, tools, and clamping devices shown are only included in the scope Bwedpfoxq Hknjx Ad Dsl of delivery if explicitly stated in the additional information. Technical data and specifications are subject to change without notice. Prior sale is reserved.

Year of construction: 2018, condition: used, workpiece length 600 mm Total weight approx. 4985 kg In our opinion, the machine is in very good used condition and can be inspected under power by appointment. Engineering year: 1994 complete retrofit: 2018 Accessories and technical characteristics: - 160 mm jaw chuck Bodpoxfwflefx Ad Dewl Accessories, tools and clamping devices shown are only part of the scope of delivery if this is noted in the additional information. Changes and errors in the technical data and information as well as Subject to prior sale!

Year of construction: 2004, condition: used, Control Siemens Sinumerik connected load 12 kVA In our opinion, the machine is in good used condition and can be viewed under power by appointment. Including Felsomat FZ250 Loading system Accessories, tools and clamping devices shown are only included in the scope Bwsdpfx Adsxwdwls Del of delivery if this is noted in the additional information. Changes and errors in the technical data and information as well Subject to prior sale!

Condition: ready for operation (used), BEYELER hydraulic guillotine shear 3000x6MM with motorized backgauge, year 1997 Bwsdpfsy Ab Alox Ad Dol

Condition: ready for operation (used), Faccin profile bending machine Bwjdpfx Adsy Abz Uj Del

Year of construction: 1994, condition: ready for operation (used), Euromac Digibend 360 Capacity: 36 Tons Stroke: 250 mm Bwsdpfxoy Ducnj Ad Dsl Tooling available optionally at extra cost We also supply new Euromac Digibend machines, notching machines, press brakes, press brakes with robots, and punching machines. For any questions, feel free to contact us without obligation.

Year of construction: 2010, condition: good (used), Make: Hegenscheidt MFD Type: PR 250 / 1000 Control: Siemens TOUCH Year: 2010 Rebuild in 2010 with SIEMENS TOUCH Rebuild cost EUR 200.000 Distance measuring device with double taster Big package with pressing tools in several diameters Specifications Metric US Standard Centre height 550 mm Max. wheel tread Ø 1100 mm Max. wheelset length 2500 mm Bwsdjkvnggopfx Ad Dol Max. pressing force 250 T Max. cylinder stroke 500 mm Cylinder Ø 300 Working speed 10 - 80 mm/min. Pinole feed 1300 mm/min. Return speed 1300 mm/min. Dimensions (Estimate) Length 6100 mm Width 5730 mm Height 3750 mm Weight 15900 kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Year of construction: 1987, condition: used, Lifting height: 400 mm 12 speeds of the table drilling machine INTERGRENN: 210 - 2580 rpm Drive motor: 380 V, 0,75 kW space requirement: 950 x 650 x 2030 mm Weight approx.: 150 kg Bwodob Nxm Dspfx Ad Dol

Condition: used, Crimping pliers for crimping tubular cable lugs and connectors with exchangeable blades for the processing range 10 - 120 mm². available blade inserts: 10, 35 and 70 mm² Bwedpfxscabzro Ad Dol Total length: 660 mm Weight: 4,1 kg

Condition: like new (used), Year of construction: 2012, Machine is completly refurbished by our technical staff Bodpfx Asxn T Smod Dswl

Year of construction: 1987, condition: used, tube Ø: 10 - 50 mm wall thickness: 1 - 6 mm Bwsdpfxog I Di Ne Ad Dsl reference material (tensile strength): 400 N/mm² speed: approx. 120 m/min

Condition: defective spare-parts repository (used), Manufacturer: Arges Type: Elephant 36 Scanner Serial Number: (S/N 1105721 & S/N 1105722) Controller ASC-2 (S/N 650656 & S/N 650646) Cable set for one optic Location: Fulda Condition: defective and non-functional Bodpfoyv Av Tex Ad Djwl – only one cable set available – no software included – Due to age, spare parts are no longer available. – Suitable for use as a “project object” or “spare parts donor”.

Condition: new, functionality: fully functional, Year of construction: 2026, operating hours: 10 h, control type: CNC control, degree of automation: automatic, actuation type: electric, controller manufacturer: Bodor, controller model: BodorThinker, laser type: fiber laser, laser source manufacturer: Boder, laser source model: Bodorpower Genius, laser hours: 5 h, laser power: 3,000 W, laser wavelength: 1,064 nm, pipe diameter (max.): 220 mm, pipe length (max.): 6,500 mm, working height: 850 mm, travel distance X-axis: 6,500 mm, travel distance Y-axis: 220 mm, travel distance Z-axis: 120 mm, feed rate X-axis: 90 m/min, feed rate Y-axis: 60 m/min, feed rate Z-axis: 30 m/min, cutting speed: 60,000 mm/min, positioning speed: 100 m/min, positioning accuracy: 0.05 mm, repeat accuracy: 0.03 mm, workpiece weight (max.): 200 kg, power: 22.5 kW (30.59 HP), input voltage: 400 V, input current: 63 A, input frequency: 50 Hz, type of input current: three-phase, type of cooling: water, compressed air connection: 6 bar, overall weight: 4,500 kg, total length: 9,000 mm, total width: 2,000 mm, total height: 2,200 mm, Equipment: CE marking, Bodor K1 Tube Laser Cutting Machine – 3 kW Fiber Laser The Bodor K1 is a compact and cost-effective tube laser cutting machine designed for precise processing of round, square, and special profiles. Equipped with a 3 kW fiber laser, it is ideally suited for small to medium material thicknesses and delivers excellent cutting quality while ensuring efficient energy use. Bedpfx Asy A Hntjd Dowl Thanks to advanced CNC control and intuitive software, the K1 offers easy operation and quick setup times. The machine stands out with its high dynamics, precise positioning, and reliable handling of a wide variety of metal profiles. Ideal for metal fabrication, contract manufacturing, and entry-level automated tube processing.

Year of construction: 2022, condition: new, Motorized guillotine shear MS 1303 Technical data: Sheet width: 1350 mm Bwedpfx Aohk Nfujd Djl sheet thickness: 3,0 mm stand width - table width: 400 mm working height: 850 mm Control: conventional

Year of construction: 2002, condition: ready for operation (used), Various used machines for metal processing are available. 1) Eccentric press Müller ExP A, year of manufacture: 1977, pressing force: 10t, outreach: 160mm, stroke rate: 120/min, ram adjustment: 40mm, stroke adjustment: 72mm, weight: approx. 800kg. 2) 3x decoiler Soprem SOP/20, year of manufacture: 1992/1992/1998, load capacity: 100kg, max. coil outer diameter: 850mm, max. strip width: 100mm, speed: 22rpm. 3) Welding closing system Messer FP500K, year of manufacture: 1977, outreach: 165mm. 4) Feeding machine Felss FR16-V, year of manufacture: 2002, max. tube diameter: 16mm, upsetting shaft speed: 342rpm. On-site inspection is possible. Bedpoyz Angjfx Ad Djwl

Year of construction: 2010, condition: ready for operation (used), travel distance X-axis: 450 mm, controller manufacturer: SIEMENS, controller model: 840D, overall weight: 31,000 kg, table load: 3,750 kg, number of axes: 3, This 3-axis HOFLER HF 600 was manufactured in 2010. It is designed for precision machining and offers advanced capabilities for various applications. If you are looking to get high-quality machining capabilities, consider the HOFLER HF 600 machine we have for sale. Contact us for further details. • Physical data • Hobbing spindle speed range: 15–380 1/min • Workpiece table speed (max): 50 1/min • Hobbing spindle torque: 3,800 (5,500) Nm • Feed rates (max): • Radial: 2,000 mm/min • Vertical: 2,000 mm/min • Tangential: 2,000 mm/min • Table load (with counter support pressure): 3,750 (1,750) kg Bwjdpfxoyvqgyo Ad Djl • Workpiece data • Max workpiece diameter: 600 mm • Radial center distance: 40–590 mm • Max module: 16 (25) mm • Tool data • Tangential shift path (max): 450 mm • Hobbing head swivel angle: ±45° • Max tool diameter: 290 mm • Max tool length: 470 mm • Cutter arbor cone: similar HSK B 125

Year of construction: 1992, condition: used, You can check under power, after scheduling an appointment. Dismantling, moving and transporting the machine is entirely the customer's responsibility. We can help with loading as needed. Parity: EXW Székesfehérvár. TSUGAMI NP-32 CNC Lathe Machine Machining rangers Machining diameters 8 to 32 mm Maximum machining length 210 mm (one stroke) Maximum hole diameter 20 mm (drill) Maximum thread diameter M14 (tap) Slide travel X1 slide (front slide) 85 mm (80 + 5) X2 slide (rear slide) 115 mm (110 + 5) Z1 slide (headstock) 215 mm Rapid-traverse speed For X1, X2 and Z1 slides 8m/min Main spindle Rotation speed For heavy-duty cutting (standard) 35 to 4,500 rpm (stepless) For high-speed cutting (optional) 60 to 8,000 rpm (stepless) Bore diameter of chuckoperating tube 36 mm Minimum indexable angle (commandable value in degrees) 5/0.00 (C-axis) C-axis rapid-traverse speed -/60rpm Bjdpfxjidqvco Ad Dowl Spindle-center height 900 mm Turrets Number of turrets 2 Number of tool-mounting stations 12 (6 stations x 2) Number of rotary-tool-mounting stations 12 (all stations on front and rear turret) Tool sizes Turning tools 16 (square) x 80 mm Drill-holder hole diameter 35 mm Indexing method Random Rotary-tool spindle speed For heavy cutting 224 to 2,240 rpm (stepless) For high-speed cutting 475 to 4,750 rpm (stepless) Machining rangers Machining diameters 8 to 32 mm Maximum machining length 210 mm (one stroke) Maximum hole diameter 20 mm (drill) Maximum thread diameter M14 (tap) Slide travel X1 slide (front slide) 85 mm (80 + 5) X2 slide (rear slide) 115 mm (110 + 5) Z1 slide (headstock) 215 mm Rapid-traverse speed For X1, X2 and Z1 slides 8m/min Main spindle Rotation speed For heavy-duty cutting (standard) 35 to 4,500 rpm (stepless) For high-speed cutting (optional) 60 to 8,000 rpm (stepless) Bore diameter of chuckoperating tube 36 mm Minimum indexable angle (commandable value in degrees) 5/0.00 (C-axis) C-axis rapid-traverse speed -/60rpm Spindle-center height 900 mm Size & weight of machne Machine size ( L x D x H ) 2,900 x 1,650 x 1,615 mm Machine weight 3000 kg Required total electrical capacity 25 KVA Required air volume and pressure 100NL/min. at not less than 4.5 kg/cm² Year of manufactured 1992 Serial number 9502 Sub-spindle Maximum thread diameter M12 (brass) Machining diameters 8 to 32 mm Spindle stroke (Z2-axis) 215 mm Spindle speed 300 to 3,000 rpm Spindle motor 1.5 kW 4P (inverter) Motors For main spindle 5.5/7.5 kW (AC spindle motor) For attachment drive: Front 0.75kW 4P (inverter type) Rear 1.5kW 4P (inverter type) For hydraulic motor 0.75kW 4P For coolant pump 0.25 kW For lubricating-oil pump 4 W Tanks For hydraulic oil 30 liters For coolant 150 liters For lubricating oil 2 liters Size & weight of machne Machine size ( L x D x H ) 2,900 x 1,650 x 1,615 mm Machine weight 3000 kg Required total electrical capacity 25 KVA Required air volume and pressure 100NL/min. at not less than 4.5 kg/cm² Year of manufactured 1992 Serial number 9502 Freight basis: EXW, unpackaged

Year of construction: 2012, condition: good (used), Muratec MW120 GT for sale Used, in excellent condition. The machine can be viewed by appointment. Delivery is the customer's responsibility, but we can help with packing and loading of need. Bwedpsifi D Tjfx Ad Dol Delivery: EXW Székesfehérvár

Year of construction: 2004, condition: good (used), You can check under power, after scheduling an appointment. Dismantling, moving and transporting the machine is entirely the customer's responsibility. We can help with loading as needed. Parity: EXW Székesfehérvár Bodpfx Aeidqwdod Djwl

Condition: new, Year of construction: 2024, This laser metal cutting machine can operate sheet material and pipes. Wattsan 1530 Rotatory can cut stainless steel, carbon steel, galvanized steel, copper, aluminum, and titanium. It features a working space of 1500x3000 mm. A pipe-cutting module for square (10 to 140 mm) and round (10 to 220 mm) pipes is incorporated on a single platform. The standard equipment set includes a 6-meter-long pipe-cutting module. We may increase the module's size to 12 meters based on your specifications. Bwodpsry U Twofx Ad Dsl You can give our managers a call for additional details! Wattsan 1530 Rotatory characteristics Working area: 1500x3000 mm Laser power: up to 6000 W Weight: 4400 Virmer provides not only prime machines but also service and delivery. Our engineers and managers are ready to answer all of your questions and provide video assistance if required. Also, owners of Wattsan equipment get lifetime online support. Virmer is located in the Netherlands and works all over Europe. Virmer is Wattsan's official supplier. We provide not only laser engravers, but also metal cutters, welders, markers and cleaning machines. Wattsan is a Chinese manufacturer, which has been creating laser equipment for almost 15 years and keeps evolving with the help of its clients. Thanks to feedback Wattsan made over 50 modernizations, which made machines more reliable, precise and powerful so you could upgrade your business up to the new level. YOU CAN WRITE OR CALL US! WE WILL SELECT THE RIGHT MACHINE FOR YOUR TASK On our company you can find a wide range of machines and components: Laser Metal Cutting Machine; Laser Metal Machine, Fiber Metal Laser, Fiber Metal Laser Engraver; CNC laser machine for metal; Laser machine for wood; CNC laser machine; Laser engraving machine; Laser engraver; Laser cutting machine for plywood; Laser engraver; Laser cutting machine for metal; CNC milling machine; laser marker. Lenses; Chillers; Cooling system for machine; Chiller S&A ; IPG laser, MAX photonics, Raycus; Compressor; Rotary device; Mirror for laser machine.

Year of construction: 2024, condition: new, Efficiency, multifunction, and safety — this laser metal cutter is a combination of three. It's time to enhance your production efficiency by 1.5 times! Wattsan 1530 can handle stainless steel, carbon steel, galvanized steel, copper, aluminium, and titanium. This CNC laser cutter for metal has two working tables that measure 1500x3000 mm, which can replace each other. The standard equipment set includes a 6-meter-long pipe-cutting module and the cabin, which protects the operator from reflected radiation and sparks during cutting. You can give our managers a call for additional details! Wattsan characteristics Working area: 1500x3000 mm Laser power: up to 6000 W Weight: 5500 kg Virmer provides not only prime machines but also service and delivery. Our engineers and managers are ready to answer all of your questions and provide video assistance if required. Also, owners of Wattsan equipment get lifetime online support. Virmer is located in the Netherlands and works all over Europe. Virmer is Wattsan's official supplier. We provide not only laser engravers, but also metal cutters, welders, markers and cleaning machines. Wattsan is a Chinese manufacturer, which has been creating laser equipment for almost 15 years and keeps evolving with the help of its clients. Thanks to feedback Wattsan made over 50 modernizations, which made machines more reliable, precise and powerful so you could upgrade your business up to the new level. Bwsdpfx Adoiicxfj Del YOU CAN WRITE OR CALL US! WE WILL SELECT THE RIGHT MACHINE FOR YOUR TASK On our company you can find a wide range of machines and components: Laser Metal Cutting Machine; Laser Metal Machine, Fiber Metal Laser, Fiber Metal Laser Engraver; CNC laser machine for metal; Laser machine for wood; CNC laser machine; Laser engraving machine; Laser engraver; Laser cutting machine for plywood; Laser engraver; Laser cutting machine for metal; CNC milling machine; laser marker. Lenses; Chillers; Cooling system for machine; Chiller S&A ; IPG laser, MAX photonics, Raycus; Compressor; Rotary device; Mirror for laser machine.

Condition: new, Year of construction: 2024, This laser metal cutting machine can operate sheet material and pipes. Wattsan 1530 Rotatory can cut stainless steel, carbon steel, galvanized steel, copper, aluminum, and titanium. It also features a protective cabin. The standard equipment set includes a 6-meter-long pipe-cutting module. We may increase the module's size to 12 meters based on your specifications. The cabin protects the operator from reflected radiation and sparks during cutting. You can give our managers a call for additional details! Wattsan 1530 Rotatory Cabin characteristics Working area: 1500x3000 mm Laser power: up to 6000 W Bwjdpfjrzacbox Ad Djl Virmer provides not only prime machines but also service and delivery. Our engineers and managers are ready to answer all of your questions and provide video assistance if required. Also, owners of Wattsan equipment get lifetime online support. Virmer is located in the Netherlands and works all over Europe. Virmer is Wattsan's official supplier. We provide not only laser engravers, but also metal cutters, welders, markers and cleaning machines. Wattsan is a Chinese manufacturer, which has been creating laser equipment for almost 15 years and keeps evolving with the help of its clients. Thanks to feedback Wattsan made over 50 modernizations, which made machines more reliable, precise and powerful so you could upgrade your business up to the new level. YOU CAN WRITE OR CALL US! WE WILL SELECT THE RIGHT MACHINE FOR YOUR TASK On our company you can find a wide range of machines and components: Laser Metal Cutting Machine; Laser Metal Machine, Fiber Metal Laser, Fiber Metal Laser Engraver; CNC laser machine for metal; Laser machine for wood; CNC laser machine; Laser engraving machine; Laser engraver; Laser cutting machine for plywood; Laser engraver; Laser cutting machine for metal; CNC milling machine; laser marker. Lenses; Chillers; Cooling system for machine; Chiller S&A ; IPG laser, MAX photonics, Raycus; Compressor; Rotary device; Mirror for laser machine.

Year of construction: 1987, condition: not inspected (used), Sharpening machine for metal and segmental circular saws. Circular saw blade diameter from 80 - 710 mm. Bodpfx Aslmkpfjd Dewl Any tooth pitch. Tooth height 1.2 - 14 mm. Working speed infinitely variable 15 - 180 teeth / min. Wet grinding device, NC controlled,

Condition: ready for operation (used), Year of construction: 1959, functionality: limited functionality, The two-roll precision rolling machine applies a pressure of 26,000 kg and features a roller core diameter of 125 mm as well as a total roller body length of 200 mm. The effective strip width is 175 mm, within which a uniform distribution is ensured. The commission number is 59024, which allows the manufacturer to retrieve the exact construction drawings. Bsdpfx Asyzh Tbsd Dswl After some time, the machine stops operating. It is suspected that the electrician should take the following into consideration: • Connection type: Three-phase current 380V/400V (3 phases + neutral + earth). • Power socket: Due to the current intensity (22.8 A), a CEE 32A socket (red industrial socket) is required. • Protection: The motor must be protected with slow-blow fuses (e.g., type C circuit breakers or Neozed fuses) to handle the high inrush current. A 32A (three-pole) protection is recommended. • Motor protection: A motor protection switch set to the rated current (here 22.8 A) is absolutely necessary to protect the motor from overload. Important note: The specifications (71.5 rpm, 5 Hz) indicate either a very slow-running special motor or a motor operated via a frequency inverter. Commissioning should only be carried out by a qualified electrician.