Used other metal processing machinery for sale (526)

Condition: used, Machine description Used continuous finishing line for steel flat bar and strip, second-hand and for sale complete with 15 in-line stations. Entry section: DIMECO decoiler with expanding mandrel, roller straightener, welder, drive unit and loop table. Surface preparation: FISHER inline shot blasting machine with dust collector and suspended brush-shear. Sizing section: cold, dry 2-high rolling stand, continuous tension straightener and Zumbach USYS laser gauge. Exit section: pneumatic shear, cut-to-length shear, bar run-out conveyor and product-specific coil recoiler. Schneider Electric Magelis operator panel with bar and coil modes. Capacities, year of manufacture and installed power: not specified. Applications This descaling, cold rolling and sizing line converts hot-rolled strip or flat bar coils into shot-blasted, cold-rolled, straightened and gauged products, delivered as cut-to-length bars or coils. Typical buyers include steel mills, flat wire and strip producers, spring and blade manufacturers, stamping plants and flat product finishing centres. Key features / Advantages Complete finishing line from decoiling to packaging, with mechanical shot blast descaling instead of acid pickling. Components from active manufacturers (DIMECO, Zumbach, Schneider Electric) make spare parts easier to source. Bar or coil output on the same line. A second line of identical configuration is also for sale, and both can be purchased as a matched pair. Sold as-is, dismantling by the buyer, available now from All Metal, specialist in used industrial machinery. Configuration: 15 posts online Unwinder: DIMECO, expanding chuck Surface preparation: fisher nip fryer? Rolling: dry cold rolling cage (duo) Straightening: roller straightener + continuous tension straightener Measurement: laser Zumbach USYS Cut: pneumatic shear + shear for length cutting Exit: bar rail conveyor + dedicated product winder Prodpfxsz N Ahxe Airsc Production modes: barrel / crown Order: Schneider Electric Magelis HMI Processed products: plates and steel straps Sale: as is, dismantling at the buyer's expense

Condition: used, functionality: fully functional, Year of construction: 2012, Crimping machine Haeger 416 with base frame and accessories fully hydraulic, energy-saving drive Predoz Niahjpfx Airsc for processing threaded fasteners up to approx. M6 (M8) nuts/threaded inserts and bolts, etc. patented operator safety system integrated storage option for tools and accessories in the base frame Technical data: Pressure range 1 to 36 kN Repeat accuracy +/- 1% Stroke rate 56/min at 25 mm stroke Overhang 406 mm Stroke length 0-150 mm, variable Drive power 1.5 kW Drive hydraulic Oil capacity 8 liters Power connection 230 V/50 Hz, single-phase Dimensions: Length 1140 mm Width 900 mm Height 840 mm + base frame 1000 mm

Condition: used, Round magnets with MK 4 mount, D = 140 mm and D = 220 mm Predpfx Aie Afw Scjrsc

Condition: used, Sliding table with 2 stops Pjdpo Afw S Ajfx Airerc

Year of construction: 2020, condition: used, Bar length: 3000mm, max. bar diameter: 80mm, operating cycle: fully automatic, monitoring and fault diagnostics: via display, part length: presettable, feed control: AC servo motor, bar diameter: adjustable via PLC keypad in 1mm increments, remnant extraction: to the rear or ejection to the front, guide channels: Vulkollan plastic, usable magazine width: approx. 900mm, control: integrated PLC, weight: approx. 2500kg. Documentation available. An on-site inspection is possible. Prodpfx Aszzdyhoirjc

Condition: used, ROLLING MILL YOM: 2004, Re-Commissioning 2021 ROLL DIMENSION Roll Dimensions BU Roll – 480 mm Dia x 460mm Face Work Roll – 150mm Dia x 420 Face Speed: max. 700 M/min Back Up Roll Driven Main mill drive: 553 Kw DC Strip thickness range: 3mm – 0.07mm Strip width range: 250mm – 350mm Roll change station Rolling force: 2500KN Max. Strip tension: Gear 1: 320 – 3200kp Gear 2: 160 – 1600kp Max. coil weight: 5 tons Max. coil OD: 1600mm Coil ID: 400/500mm Controls: SPS S7 400 Shape control Roll bending AGC Fume exhaust system PAY-OFF Ground level “L” shape coil car with hold down arm Uncoiler with snubber roll arm Uncoiler drive: Hydraulic motor Seekamp edge control unit 3-roll leveler stand with Peeler table + snubber roll, side guides and hydraulic strip clamp – NEW 2007 LEFT & RIGHT WINDERS Winder drive: 220kW DC (ea) Coil Stand / In-ground coil car Winder with hold down arm Vollmer shape roll with analog VMF 2000 Thickness measurement: Vollmer contact gauge + laser gauge Oil separation: 2 sets of rubbers + 1 set of oil separation rolls (felt) Pedpfx Aisz Irb Dororc Edge guides + strip clamp 3x Metal oil separation rolls Oil filtration: Manufacturer: Achenbach Buschhuetten Type: Superstack YOM: 2003 Mounted production floor level

Year of construction: 2004, operating hours: 4,840 h, condition: ready for operation (used), Machine tool manufactured in 2004. This MYLÄP BLP 600/3S features a power of 2.2 kW and operates at a supply voltage of 400 V. If you are looking to get high-quality capabilities, consider the MYLÄP BLP 600/3S machine we have for sale. Contact us for further details. Psdpfx Aoz Hvgujirorc • Supply Voltage: 400 V • Power: 2.2 kW • CE Certified

Condition: used, Year of construction: 1997, functionality: fully functional, machine/vehicle number: 000464, Max. pipe diameter Ø 42 mm Min. pipe diameter Ø 6 mm Max. pipe thickness 2.5 mm Max. bending radius 270 mm Min. bending radius 25 mm US metric: Max. pipe diameter 1.654 inch Min. pipe diameter 0.236 inch Max. wall thickness 2.5 inch Max. bending radius 10.63 inch Prsdevmpbropfx Airoc Min. bending radius 0.984 inch Throughput: 42; Rotation angle: 187°; Digital display: yes; Motor power: 95 kW; Electrical connection: 380 V; Machine weight: 1550 kg; Dimensions: 4700 mm; Width dimension: 800 mm; Height dimension: 1300 mm;

Year of construction: 2022, condition: used, The lot consists of 2 binding machines. Machine type: KNRA-6/900x1200 Year of manufacture: 2022 Additional technical data can be provided upon request. Prjdpjy Tw Tnefx Airjc Offers must be submitted for consideration.

Condition: good (used), For sale: a complete set of Weber-Hydraulik hydraulic rescue tools. The set includes a SP-40 hydraulic power unit, cutters, and a spreader. The entire set is mounted on a metal transport frame and equipped with reels containing hoses. Prodjz Skyiopfx Airec The set has been inspected and is in 100% working order. The visual condition and detailed scope of equipment are shown in the photos. Data read from the nameplates: Power unit manufacturer: Weber-Hydraulik Power unit type: SP-40 TÜV marking: SP32-95-TP18/SP30 Engine: ATB AKF 90S/2F-12R Engine power supply: 230 V, 50 Hz Engine power: 1.3 kW Rotational speed: 2760 rpm Engine protection rating: IP54

Year of construction: 2006, operating hours: 12,169 h, condition: ready for operation (used), overall weight: 1,400 kg, Rotary table wheel blast machine manufactured in 2006. This C.M. T-10 features a turntable diameter of 1,000 mm and a usable height in the workspace of 450 mm. It has a maximum permissible table load of 900 kg and operates with a blast wheel power of 5.5 kW. If you are looking to get high-quality blasting capabilities, consider the C.M. T-10 machine we have for sale. Contact us for further details. - Mains Voltage: 400 V- Number of Phases: 3 Ph / 3+PE- Frequency: 50 Hz- Operating Load (Power): 4.741 kW- Operating Load (Current): 10.02 A- Short Circuit Protection / Interrupting Capacity: 30 kA- Max. Motor Current: 7.90 A- Blast Wheel Power: 5.5 kW- Turntable Diameter: 1,000 mm- Usable Height in Workspace: 450 mm- Max. Permissible Table Load: 900 kg- Control Unit / HMI: ESA VT50- Safety Interlock Switch: Telemecanique XC2SE7311 / XC2SE- Included Equipment / Scope of Delivery: All required cables and hoses for direct commissioning, screw holders for angular positioning of workpieces inside the blasting chamber Pjdpfxsz Ha Ene Airsrc

Condition: excellent (used), Professional hydraulic set from the renowned manufacturer HURST / Hale Fire Pump Co., used in technical rescue applications (fire brigade, rescue services). ——— Condition: Used, fully operational, and tested equipment Shows normal signs of use as seen in the photos Technically in good condition – ready for work ——— Technical specifications: • Model: SP 45 • Manufacturer: Hale Fire Pump Co. / HURST • Year of manufacture: 1992 • Operating pressure: 350 BAR • Power supply: 230V (single-phase) • Standard: DIN 14751 ——— Set includes: • HURST hydraulic pump • Hydraulic shears • Spreader • Hydraulic hoses (2 pcs.) • Cable drum • Set of quick couplings • Transport frame ——— Applications: • Road rescue • Technical work and demolition • Rescue services / Volunteer / Professional fire brigades • Industry (spreading, cutting) ——— Podsz Sl Dpspfx Airsrc Advantages: • Robust, professional construction • High cutting and spreading force • Proven HURST technology • Complete set – ready for immediate use

Condition: excellent (used), functionality: fully functional, FICEP PUNCHING MACHINE MODEL 801 GR Strokes per minute: 22 Stroke: 40 mm Punching capacity: R = 45 Throat depth: 510 Prsdpfx Ae Aa Aq Hsiroc Pressure: 80 tons USED MACHINE INTERNAL CODE: car 177

Year of construction: 2009, condition: ready for operation (used), functionality: fully functional, For sale: a professional industrial machine for barbed wire production, manufactured by the leading Italian company Vitari / Eurolls Group. The machine is extremely reliable, with a compact vertical design and an operator safety cabin. Key features: Brand / Model: Vitari BVM (Eurolls Group) Year of manufacture: 2009 Certification: CE compliant Twisting type: Continuous (standard classic type – Iowa, Glidden, Domingo, Simplex, etc.) Core wire diameter: Ø 1.6 – 2.8 mm Barbed wire diameter: Ø 1.6 – 2.5 mm Barb spacing: Adjustable (60 – 150 mm) Prsdpfjz Ercpox Airec Operating speed: Up to 50 m/min (up to 700 rpm) Weight of finished coil: Up to 35 kg Control: Digital meters for measuring meters and coils, quick control panel

Year of construction: 2021, condition: ready for operation (used), controller manufacturer: SIEMENS, controller model: SIMATIC S7-1500, total width: 2,035 mm, total height: 2,215 mm, product length (max.): 2,200 mm, number of axes: 3, This 3-axis clean CELL 3220 was manufactured in 2021. It features a powerful 600 W diode-pumped solid-state laser with a wavelength of 1064 nm and an integrated water-to-water cooling system. The machine is equipped with a Siemens control unit and a robust ABB robot for enhanced automation. If you are looking to get high-quality laser cleaning capabilities, consider the Clean Laser clean CELL 3220 machine we have for sale. Contact us for further details. • Machine Type: Automated Robotic Laser Cleaning Cell • Laser Source: cleanLASER CL600 Mid-Power Laser • Laser Type: Diode-Pumped Solid-State Laser (DPSSL) • Laser Wavelength: 1064 nm • Laser Operation Mode: Pulsed (ns) • Average Laser Power: 600 W ±5% • Alignment Laser Wavelength: 658 nm • Alignment Laser Power: 28 mW • Cooling System: Integrated Water-to-Water Cooling System • Additional Chiller: Cooler ONE Plus Air (Air-Cooled) • Fiber Cable Type: Quartz Fiber Optic Cable • Fiber Length: 10 m • Fiber Geometry: Square • Protective Hose Diameter: 21 mm • Optical System: STAMP 25 2D Optics • Optics Connection: 90° • Focal Length: 163 mm • Control Unit Brand: Siemens • Control Unit Model: SIMATIC S7-1500 PLC • Drive System: Siemens 1FK7 Servo Drives Predpfx Aijz Ahccoroc • Linear Axis System: 3-Axis Portal System • Maximum Axis Payload: Approx. 25 kg • Axis Speed (X/Y): >200 mm/s • Communication Interface: Profinet • Digital I/O: Standard • Software: cleanSTUDIO / cleanCONTROL • Industrial PC: 19" Rack PC • SSD Capacity: 256 GB • RAM: 8 GB • Processor: Intel Core i5 (minimum) or equivalent • Robot: ABB Robot • Gripper: 2-Workpiece Gripper • Conveyor System: Bosch TS2 Transfer System • Loading System: Manual Workpiece Carrier Loading • Discharge Conveyor Length: Approx. 4.8 m • Extraction System: ULT Maxi Plus • Fan Capacity: Max. 4,000 m³/h • Maximum Pressure: 3,300 Pa • Filter Cartridges: 4 × 600 mm • Dust Drum Capacity: 200 L • Extraction Power: 5 kW • Power Supply: 400 V, 3-PhaseAdditional photos are available upon request.

Condition: good (used), Year of construction: 2008, functionality: fully functional, Peddinghaus FDB 1000/3 – CNC Plate Drilling & Profiling System– Year 2008 Pedpfxjz Hfbbo Airerc 6 metres x 1 metres Capacity. Maximum workpiece width 1000 mm. Maximum workpiece thickness 50 mm. 3 x drilling spindles. Maximum drilling diameter 40 mm. Oxy‐Fuel. Hypertherm Plasma. Kemper Extraction Unit.

Condition: excellent (used), Year of construction: 1999, cross-wedge rolling machine Pjdo Ad I E Repfx Airorc It hot-rolls semi-finished products for shafts, pins, automotive parts, and agricultural blades. It can roll a shaft shape from a round bar in just a few seconds. Working diameter: cca 15 - 70 mm Working length do 400-600 mm Max. rolls diameter cca 700-800 mm Workpiece weight 1340 kg Machine weight cca 12.000 kg

Year of construction: 2019, condition: ready for operation (used), controller manufacturer: SIEMENS, controller model: SIMATIC HMI, total width: 2,035 mm, total height: 2,215 mm, product length (max.): 2,200 mm, number of axes: 6, This 6-axis CleanLASER cleanCELL 3220 CL600 was manufactured in 2019. It features a powerful 600 W Q-switched fiber laser, designed for automated laser cleaning and surface treatment of metal components. The system includes a 6-axis industrial robot and a fully aligned beam path for precision cleaning. If you are looking to get high-quality automated laser cleaning capabilities, consider the CleanLASER cleanCELL 3220 CL600 machine we have for sale. Contact us for further details. Prsdpfxjz Aha Ie Airec • Machine Type: Automated Robotic Laser Cleaning Cell • Application: Automated Laser Cleaning / Surface Treatment of Metal Components • Laser Source: cleanLASER CL600 • Laser Type: Q-switched Fiber Laser • Average Laser Power: 600 W • Wavelength: 1064 nm • Laser Class: Class 4 (Laser Source) • Complete System Classification: Laser Class 1 • Laser Optics: STAMP 25 • Scanner Type: 2D Scanner • Working Scan Field: Approx. 65 × 65 mm • Objective Lens: f = 163 mm • Red Positioning Laser: Yes • Pulse Frequency: Variable • Beam Delivery: Fully Aligned Beam Path • External Fiber Length: Approx. 8 m • Door Interlock Connection: Yes • Remote Diagnostics: TCP/IP / USB • Fieldbus Interface: Profinet • Software: cleanSTUDIO • Telediagnostic Software: CLL Remote Diagnostics • Robot Type: 6-Axis Industrial Robot • Robot Programming: Teach Mode • Robot Gripper: Single Part Gripper • Loading System: Manual Loading • Conveyor System: Bosch T2 Carrier System • Buffer System: Multiple Workpiece Carriers • Unloading: Automatic Conveyor • Conveyor Length: Approx. 2 m • Workpiece Carrier: Not Included • Designed Workpiece Types: 2 • Machine Footprint (W × D × H): Approx. 2,035 × 2,200 × 2,215 mm • Machine Frame: Welded Steel Base Frame • Cell Construction: Aluminium Profiles • Work Table: Aluminium T-Slot Plate • Front Door: Folding Door • Electrical Cabinet: Integrated Double Cabinet • Cabinet Width: 1,200 mm • Cabinet Depth: 800 mm • Cooling Requirement: External Water Cooling (

Condition: excellent (used), For sale: a set of Hurst hydraulic rescue tools. Pjdpfxez Sky Aj Airjrc - Hydraulic cutters. - Spreader. - Hydraulic pump.

Year of construction: 1974, condition: refurbished (used), functionality: fully functional, machine/vehicle number: 1293, CNC Radial Forging Machine GFM mod. SX-16 Manufacture: GFM (Austria) YOM: 1974 / 2022 Model: SXL-16 Machine number: 1293 PLC: Siemens S7 - Technology V4.2 with CNC Bosch Rexroth XM Numbers of Hammers: 4 Forging force: 800 Ton (200 t per Hammer) Strokes per minute: 580 Hammer length: 320 mm Maximum hammer setting scope - calculated by diameter: 100 mm Maximum diameter of forging regarding: - structural steel: circular cross section – Ø 160 mm square cross section – 130 mm - high alloy steel: circular cross section – Ø 120 mm square cross section – 100 mm Extreme quadrangle: 12 x 120 mm Maximum length of forging: 6000 mm Min and Max diameter Psdeq U Sa Sepfx Airjrc of mounting in manipulator: 30 - 160 mm Feed of manipulator A: 6800 mm Feed of manipulator B: 7200 mm Passage through manipulator: Ø 130 mm Manipulators speed in fast move: 400 mm/s Feed speed of manipulators (stepless adjustment): 10 ÷ 115 mm/s Cooling water pressure: 3 ÷ 5 bar Temperature of inlet water: max. 30˚C Cooling water consumption: 34m3/h Pipe diameter for cooling water: 2” Compressed air pressure: min. 5 bar Pipe diameter for compressed air: Ø20 mm Consumption of compressed air: 1,5 Nm3/h Power supply (nominal power): 350 kW Motor voltage: 500 V Control voltage 220 V Power of main engine: 200 kW Power of pump motors: 185 kW Power of manipulators motors: 2 x 22 kW Dimensions of the machine Axis height of forging above the hall level: 750 mm Maximum height of machine above the hall level: 2.050 mm Maximum length of machine on the hall level: 33.740 mm Foundation length: 34.200 mm Maximum width of machine on hall level without loading equipment: 4350mm Foundation width: 15.600mm Machine net weight: 124.490 kg

Year of construction: 2026, condition: new, functionality: fully functional, machine/vehicle number: B5020D, Digima B5020D Slotting Machine Professional vertical slotting machine with a 460 mm rotary table, 3 kW power, and a stroke of up to 200 mm. The Digima B5020D is a robust metal slotting machine designed for precise machining of keyways, channels, shaped surfaces, and slotting operations on steel and cast iron components. The machine is designed for use in tool shops, production facilities, maintenance departments, and for both individual and serial production. Model B5020D offers a maximum slotting length of 200 mm, four slide stroke speeds of 32 / 50 / 80 / 125 strokes/min, a rotary table with a diameter of 460 mm, and a stable construction weighing 2200 kg. Technical specifications of the Digima B5020D slotting machine: Model - B5020 / B5020D Machine type - Metal slotting machine / vertical slotter Brand - Digima Manufacturer's code - B5020 Condition - New Supply voltage - 400 V Maximum power - 3000 W Main motor power - 3 kW Rapid feed motor power - 0.75 kW Maximum slotting length - 200 mm Number of slide strokes - 32 / 50 / 80 / 125 strokes/min Number of stroke speeds - 4 speed ranges Slide tilt range - 0–8° Working table diameter - 460 mm Vertical adjustment range of the slide block - 200 mm Distance from the face of the tool holder to the column - 480 mm Distance from the table surface to the lower part of the slide guide - 320 mm Maximum longitudinal table travel - 420 mm Maximum transverse table travel - 420 mm Maximum table rotation angle - 360° Table feed range - 0.054–1.24 mm/stroke Table rotary feed range - 0.035–0.805° Maximum size of the slotting tool - 25 × 40 mm Maximum slotting force - 5 kN Maximum table load - 400 kg Podpfx Aijz Sp Hyorsrc Width of the keyway at the center of the table - 18 mm Net machine weight - 2200 kg Product weight with individual packaging - 2200 kg Packaging / transport dimensions - 1720 × 1220 × 1885 mm Packaging condition - Original

Condition: used, Bosch Rexroth Hydraulic Power Unit 5.5 kW / 100 liters tank Bosch Rexroth Hydraulic Power Unit 5.5 kW / 100 liters, Used machine Manufacturer / Integrator: Bosch Rexroth Kft. Motor Manufacturer / Type: Lammers Elektromaschinenfabrik 12AA 132S-4 (IE1) Year of manufacture / Serial No.: 208/2002/15 Drawing No.: ABHAG-100S41-1483-B Hydraulic Diagram: HS51-D434-C Condition: Used, industrial execution Dimensions and capacity: Overall dimensions: 930 x 760 x 2120 mm Tank capacity: 100 dm³ (100 liters) Recommended oil type: HVU-46 Technical and operating parameters: Motor power: 5.5 kW (at 50 Hz) / 6.3 kW (at 60 Hz) Electrical connection: 400/690 V Δ/Y (50 Hz) / 460 V (60 Hz), 11.2/6.5 A Motor speed: 1440 rpm (at 50 Hz) Max. operating pressure (directional valves): pmax = 350 bar Valve manifold execution: Bosch Rexroth 4WE 6 E62/EG24N9K4 directional valves (24V DC) Protection class / Efficiency: IP55 / IE1 Design, Operation: High-quality industrial Bosch Rexroth hydraulic power unit featuring a 100-liter oil reservoir, a 5.5 kW Lammers electric motor, and a manifold stack with 350 bar Rexroth directional solenoid valves. It supplies pressurized hydraulic fluid to drive and control hydraulic cylinders, presses, and automated machinery. Pedjz Rxfpopfx Airerc Suitable Application Areas: Hydraulic power supply and control for industrial presses, bending machines, and metalworking equipment. Centralized hydraulic unit for special-purpose machinery, lifting devices, and clamping systems. Multi-actuator control in automated manufacturing lines.

Condition: excellent (used), For sale: a set of Weber-Hydraulic hydraulic rescue tools. - Hydraulic cutter. - Spreader. - Hydraulic pump. Prjdpfx Aoz Skxxsirsc

Condition: excellent (used), For sale: a set of Weber-Hydraulic hydraulic rescue tools. - Hydraulic cutter. - Spreader. Pedpfx Aijz Skypjrsrc - Hydraulic pump.

Year of construction: 2021, condition: used, Load capacity: 2000kg, support surface per table X/Y: 1400mm/900mm, tilting angle: 100°, travel of the movable table: approx. 300mm, drive: hydraulic, control: PLC, operating modes: manual/automatic, collision avoidance in manual operation via table position and table inclination. Equipment: heavy-duty rollers, therefore movable. Machine dimensions X/Y/Z: approx. 2600mm/1800mm/1300mm, weight: 1310kg. Documentation available. Inspection possible by arrangement. Prodpfxszu Sztj Airoc