Used Other process engineering equipment for sale (75)

Condition: used, Plant: lamella separator, lamella clarifier, lamella separator Condition: used, up to 120 m³/h depending on medium Design: robust, powerful design Material: VA on conatin frame, 30 ' container, scraper plates: in PP dimensions: LXBXH 7580X2435X3000 mm Weight: approx. 8000 kg Principle: The dirty water is fed to the inlet of the lamella separator and flows downwards in it. Due to the arrangement of the lamella plates in the lamella separator, the dirty water is diverted below the lamellae and flows upwards through the lamellae. Thus, the solids sink to the bottom of the lamellas. The purified water is transported to the outlet. The solids on the lamellas gradually slide down along the lamella plates. This is where the sludge funnel is located. Scraper: Optionally, we offer the lamella separator with a scraper, which keeps the sludge flowable. Application: Separation of solids and liquids by sedimentation. Lamella separators are often used as a preliminary stage before filter presses or decanters for thickening. By pre-thickening a thin sludge, the filter press can be sized smaller in terms of filter area. The plant is in good condition and is available for rent or purchase. An inspection at our plant is possible by arrangement. We also offer new lamella separators with a delivery time of approx. 8 to 10 weeks ! Dslq Aioppyhtj Rgskl

Year of construction: 2024, Condition: new, Functionality: fully functional, machine/vehicle number: CF 2.0 3000, AdBlue® is a special non-toxic synthetic urea solution that is used for the chemical reduction of Nox emissions in diesel-fueled heavy goods vehicles and passenger vehicles. AdBlue® complies with ISO and CEFIC regulations. AdBlue® must comply with the Dkjlq Ajtk H Sysi Rgol DIN-70070 standard and ISO-22241 technical specifications to ensure that your vehicle performs the function of the SCR system correctly. COLDFUSION This technology greatly reduces energy costs per working hour, experience has also shown that it is much easier to remove unwanted biuret and triuret compounds with the cold production process. ADVANTAGES OF MODULAR ASSEMBLY - The modules are standardized and can be put together in many forms and formations - The modules are adaptable to any type of space - It is easy to transport and install the drive -Modules are quickly connected with mechanical and electrical connectors -Due to their separate weights, the modules do not need a special substrate hardness -Due to the mutual connection, fixing to the surface is not necessary - Modules can function separately - Modules can be ordered separately MODUL - HWR COLD FUSION 3000 -Production module for AdBlue® additive with HWR innovative ColdFusion® process - Module capacity: 3000 lit/h of finished product - Goods entrance: Full stainless steel Hooper with a volume of 2000 liters, with a construction for accepting BIG BAG bags 1000, 2 supports for BIG BAG, V crusher, and spirals for dosing the production unit -Production: 2 stainless steel tanks for production, 1 produces, the other is ready for pouring, 2 x 1000 lit, special renowned pumps and pipelines COLD FUSION MODULE -Construction: The module is a separate structure, 5m long, 2m wide, with pipelines, adaptable for connection with other modules in multiple formats -Management: Separate control cabinet, special device for measuring Urea concentration, air compressor, HMI display, software with HWR smart system/remote access, monitoring -Total weight: approx. 2,150 kg - Required connections: Max. 12.1 kW electricity, demi water approx. 4000 lit/h -Documentation: Basic user, service -Warranty: 12 months from delivery MODUL - DEMI WATER 3000 - Module for the production of DEMI water for the needs of AdBlue® production -Capacity :3000 lit/h of AdBlue products -Mechanical filtration process, carbon filter filtration, water softening, triple reverse osmosis filtration and polishing with MixBed filtration -Included UV sterilization of incoming water, suitable for well water, finished product without bacteria -Construction: The module is a separate structure, length 4m, width 2m, with pipelines, adaptable for connection with other modules in several formats -Management: Separate control cabinet, software with HWR smart system - Output water compliant with ISO22241 -Total weight: approx. 1,200 kg - Required connections: Max. 5.5 kW electricity, inlet water approx. 4000 lit/h -Documentation: Basic user, service -Warranty: 12 months

Condition: used, homogenizer - condition: used - location: Bremen Other: - Drive power: 11 kW - Areas of application: Mixing / homogenizing and pumping of emulsions and pastes - total height: 650 mm - total length: 1.200 mm Dkelst Etimoq Ai Rgsl - total width: 460 mm

Year of construction: 2008, Condition: good (used), Functionality: fully functional, machine/vehicle number: A287-2008, Fully operational Thermal Afterburner which implements the method of thermal disposal of contaminated gases before releasing them into the atmosphere. Afterburner ready for use to be checked on site. Delq Ai Rjt Dwbwegekl

Year of construction: 1988, Condition: used, Used Wynveen Cryloc Sieve Dkolqsqwyxks Ai Rgel For sieving pellets after pelletmill / pelletpress

Condition: used, Year of construction: 2017, Functionality: fully functional, machine/vehicle number: SNDE106744, input voltage: 400 V, input frequency: 50 Hz, Vacuum casting system was used to cast epoxy resin into plastic housings Dkolevnrz Deq Ai Rgjl

Condition: used, Lamella separator 2 pieces identical in construction: Doljt Ay Sceq Ai Rgskl - Manufacturer and year of manufacture unknown (probably late 70s) - Rectangular design, with discharge screws to the funnel - Dimensions: Length 9700mm, width 3500mm, height 6100mm

Condition: new, Year of construction: 2020 Model: 6RBBR S/N: 2336550100005 / 233390004891 Sample container: 21 bottles of 1 l each Connection: 230 V Features: Dimensions: 610 x 610 x 1,200 mm Delot E A Theq Ai Rgokl Condition: unused Weight: 63 kg

Condition: used, Year of construction: 2018, NETZSCH Vakumix mobile homogenizer LambdaVita 3 mobile - condition: used Dslq Aist Er Hwe Rgokl - location: Bremen Other: - Manufacturer: NETZSCH Vakumix - Type: LambdaVita 3 mobile - Year of construction: 2018 - Drive power: 37 kW - Areas of application: Mixing/homogenizing and pumping around emulsions and pastes - total height: 930 mm - total length: 1.400 mm - total width: 500 mm

Condition: new, Year of construction: 2023, machine/vehicle number: U-231811/2, 2x vdl HT350 lock without drive. Are new and have never turned, the books and flange gasket are new. Locks are without drive. Dolq Aijvpg Axj Rgjkl Size: DN350 House: Painted cast iron Rotor: Stainless steel with rubber blades Bearing: External slide bearings at 100% filling 10 liters per revolution.

Year of construction: 2016, Condition: new, Nieuwe Doseersluis TBMA HAR 300 RVS Dkjlq Ai Red Nxm Rogel Met SEW motor

Year of construction: 2013, Condition: excellent (used), Functionality: fully functional, A. Dimensions of thermoformed products maximum sheet size 2040 x 1040 mm maximum dimensions of the forming area 2000 x 1000 mm maximum product depth 650 mm Minimum product size 54% of the maximum size D. Heating panels Type of heating elements Infrared ceramic Heating power of the upper panel 52 kW Number of heating elements with 650 W power 56 pieces 250x60 Number of heating elements with 325 W output 24 pieces 250x60 Heating control of the upper panel individually Heating power of the lower panel 32 kW Number of heating elements with 400 W output 80 pieces 8x10 Heating control of the lower panel individually E. Vacuum installation Tank capacity 1000 l Flow pump 160 mc/h Motor power 4 kW F. Cooling Number of fans 4 pieces Motor power 0.37 kW G. Main power supply Installed power 89.5 kW Voltage (three-phase + neutral) 400 V Frequency 50 Hz H. Main compressed air supply Pressure 6 bar Width: 3.9 m Length: 3.9 m Height: 3.5 m Weight: 9000 kg Number of thermoformings performed: 8357 Preparation of the machine (pushing out the heating table): 17723 Automatic operating hours counter for hours: 311 Automatic operating hours counter for reserves: 602 Operating hours counter in manual mode: 436 Hour counter in matrix change mode: 335 As an add-on: COOLER EURO CHILLER Model type: GC-RB A 012 00006 Series: 290313201302910296 Year of manufacture: 2013 Volt: 400 Hz: 50 kW: 12,5 A: 22 Vaux: 24 VI: 500 IP: 54 Gas: R407c Delq Ai Rjr Iz Exsgekl Heat capacity: 6KW Cooling capacity: 14.5 KW VACUUM PUMP - Busch Type: RA 0160 D 5Z1 VRXX Number: C1308000049 p 0.1 hPa (mbar) Oil ISO VG 100/ 5l Manufacturer: Ateliers Busch S.A., Zone Industrielle, CH-2906 Chevenez

Year of construction: 1989, Condition: used, Used shredder Manufacturer: Seybert & Rahier Type: RST 413 Serial no.: 158283 Year of construction: 1989 Djlqoil Aqqs Ai Rgskl Q: l/h 0-1000 H: mWS 33 Buffer liquid: 500 cm3

Year of construction: 2021, Condition: like new (used), Functionality: fully functional, machine/vehicle number: 123-21, We are offering a melting station for granulates/crosslinkers as good as new. The machine can be inspected at the Burscheid site. Dolq Aijualn Aj Rgjkl

Condition: used, Year of construction: 1998, NETZSCH Vakumix Continuous homogenizer condition: used location: Bremen Other - Continuous homogenizer GR2 DHOLF - Brand: VAKUMIX - for mixing/homogenizing and pumping around emulsions and pastes - Electrical connection: 400 V / 50 Hz; 11kW - various technical documents available Dkelq Aot Erpfei Rgol - total height: 800 mm - total length: 1.300 mm - total width: 400 mm

Condition: good (used), Year of construction: 2015, Industrial air scrubber / air scrubber Consisting of: Polyester tank, suitable for acid (sulfuric acid). Capacity 108 m3. Various manholes, and internal platforms. See detail drawing Diameter : 4000 mm Height : 11132 mm Specific mass : 1500 kg/m3 Dkslq Ajtqwf Rji Rgjl Equipped with various connections at the bottom, top and side.

Year of construction: 1999, Condition: good (used), type: K71 year of construction: 1999 make: APV Dkslq Aett Nrpji Rgol

Condition: good (used), Year of construction: 2021, operating hours: 1,960 h, Functionality: limited functionality, overall weight: 198 kg, total length: 1,750 mm, total width: 1,065 mm, total height: 2,290 mm, The hydration chambers system comprises four separate and independently controlled, sealed chambers, all of which are controlled by a single Eurotherm T2750 programmable automation controller and Eurotherm Eycon20 Visual Supervisor. The software used for programming both the T2750 and Eycon20 is LIN tools, a multi-purpose Windows-based package for use both off-line and on-line. Operation Manual, Technical details and electrical drawings available upon Request Notes - 1. 2 units available 2. Price mentioned is Ex works. Any expenditures incurred for packaging and logistics would be charged extra to the buyer. Dkolqevmi A As Ai Rgel Acknowledgement and disclaimer The goods the subject of this transaction were acquired by the seller for its own purposes and are no longer required. The sale of the goods is not part of the seller’s ordinary business and is part of a one-off sale to dispose excess spare parts that are no longer required and equipment that is surplus to our current requirements. The seller does not make any representation as to the purpose for which the goods might be utilised or their fitness for any particular purpose. The seller is not aware of any defect or faults in the goods (other than as may have been disclosed to the buyer). The buyer accepts the goods on the basis of their knowledge of any defects disclosed and the goods are otherwise provided ‘as is’ and without any warranty or representation as to their condition, except as expressly stated otherwise. No refunds will be offered if the goods are not suitable for your particular intended purpose, unless an express representation was made to say that the goods would be suitable for that specific purpose. Nothing in these terms is intended to exclude or limit any remedy that may be available to a consumer under the Australian Consumer Law to the extent that it applies to a particular sale of any goods.

Condition: used, Used cutter suction excavator Z-243 Dkjlq Aisrq I I Nj Rgol Operating hours: approx. 600 Application: self-maneuvering cutter suction dredger for cleaning water bodies, sludge removal from water bodies Pumping capacity: up to approx. 350 m3/h Suction dredger depth: approx. 5 m Total length with extension: 13,20 m Overall width: 2.90 m Overall height: 2.70 m Depth: 0.75 / 1.18 m Draught: ready for operation 0.62 m Suction pipe diameter: 150 mm Excavator depth at an angle: 45° for extension 5.0 m Fuel capacity: 300 liters Cutting speed (variable speed): 0-90 rpm and vice versa Cutting power: 10 kW / 13 hp Deutz main engine: 90 kW / 120 hp Transportable on the road: Yes Largest part for transport: (main pontoon with extension) 11.60 x 2.50 x 2.50 m, approx. 10 tons Cabin: One-man operation in comfortable, low-noise cabin Transport: Can be dismantled and transported by road, overseas transport in containers Pontoons: The hull consists of several pontoons connected by a proven coupling system Coating: Marine coating system and cathodic protection for optimum protection Consumption: Low fuel consumption and low total cost of ownership System: Closed throat cooling system

Condition: good (used), Counting , filling and closing line for pils tablet and capsules Dkjlqsvkptps Ai Rgjl

Condition: used, Machine: Screw conveyor, hollow screw Housing / screw: Stainless steel housing / standard steel screw Special feature: motorized solids pusher Dimensions: Length = 13.7 m / Ø screw = 350 mm / width inside = 400 mm / width outside = 600 mm Dkolq Aisrmix Ej Rgjl Weight: approx. 600 kg

Year of construction: 1989, Condition: used, Used shredder Manufacturer: Seybert & Rahier Type: RST 413 Serial no.: 158282 Year of construction: 1989 Q: l/h 0-1000 H: mWS 33 Buffer liquid: 500 cm3 Dkjlq Aieil Aquo Rgjl

Condition: good (used), Attachment: Lamella separator Condition: pre-owned m³/h up to 80 m Dkslq Ai Rsb D Etkjgel Usage: Separation of solids and liquids by sedimentation. Lamella separator as a preliminary stage before filter presses are often used for thickening. The filter press in relation to the filter surface can be sized smaller through a thin slurry before thickening. The plant is in good condition and available for rent and for sale. Visit us at the factory is like possible agreement.

Condition: used, Used Crusher for Filter Cake / Lump Breaker Dslsbpia Deq Ai Rgokl Drive: Lenze The crusher for filter cake or lump breaker consists of two horizontal rotating shafts.

Year of construction: 1992, Condition: used, Plant used separation / separation system Manufacturer: Schauenburg Type: MAB 125 Engine type: 1130-1190 Year of construction: 1992 Power: 125 m ³/h Speed: 1000 rpm Dslq Aeb Swr Noi Rgjkl KW: 2.7