Used other extractors & exhaust units for sale (29)

Condition: used, Year of construction: 2021, total height: 1,800 mm, total width: 1,000 mm, total length: 1,200 mm, overall weight: 150 kg, space requirement length: 1,200 mm, space requirement width: 1,000 mm, space requirement height: 1,800 mm, transport width: 1,000 mm, transport length: 1,200 mm, tank capacity: 50 l, transport height: 1,800 mm, hose length: 10,000 mm, No. 04521 Cyclone pre-separator ESTA ZA 50 Unused, year of construction 2021, in new condition Filter relief for very large amounts of dust The stationary cyclone pre-separators are installed upstream of the actual filter unit and are used to pre-separate dry and free-flowing dusts. Medium and coarse dust particles are already separated in advance so that only the fine dust still needs to be filtered. This reduces the operating costs of the entire extraction system. Cyclone pre-separators achieve a separation efficiency of more than 90% with an average particle size of at least 150 microns. Top cyclone diameter 282 mm Cyclone height 1458 mm Dust container 50 liters Top connection pipe diameter 50 mm Container connection pipe diameter 82 mm Including approx. 10 m suction hose, diameter 50 mm Hfsdpfx Ajx Upqhedwsb Transport dimensions approx. 1200 x 1000 x 1800 mm LWH Weight approx. 150 kg To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical specifications, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Terms of payment: Prices plus VAT, payment before collection or dispatch Terms of delivery: ex warehouse

Condition: new, galvanized sheet metal dust collection trays fold down side and rear walls - optional rear wall with suction function Working area 2500 x 800 mm Working height 930 mm incl. centrifugal fan 2.2 kW, 400 V, 50 Hz Nominal air flow 5400 m3/h Number of filter cartridges # 4 DM filter cartridges 320 mm Length filter cartridge 600 mm Total filter area 34.8 m2 Noise level 78 dBA Hedjh Ucqtopfx Adwefb Compressed air 5-7 bar Advise used machines: • Technical data without obligation, mistake and intermediate sale reserve. • Price is considered ex-location price • All articles or machines are bought as seen without any entitlement on warranty. • It is left to the choice of the buyer to view the machines before at its location. • Special arrangements are possible but only valid in written form. (We answer your inquiries only with stated address + telephone number!)

Condition: used, Suction collector Suction bell -used- ----- Technical data ----- Connection piece: 350 mm, Spigots: 5 pieces, Hfjdpfxsu R Tb Ue Adwob nozzle diameter: 2x160,2x100,1x120 mm

Condition: used, Square approx.: 510 x 510 mm Tube inside: 230 mm Pipe inside: 230 mm Hfjdpolf Iz Asfx Adwsb

Condition: new, functionality: fully functional, Year of construction: 2022, ATEX rotational valve, 1,5kw- 18rpm. Special heavy duty. SEW drive with cooler fan. Special knive system. Special 5 line sleeve system. Inert gas adding hole. Possible to buy 2 new, and 5 slightly used valves. Hjdpfx Adsx Dzc Eewofb

Condition: used, Dust Cyclone, Dust Separator Overall dimensions: 2350 x 2100 x 5040 mm Cyclone diameter: 2100 mm Inlet side: 870 x 360 mm Hsdpfxoxt Un He Adwjfb Outlet diameter: 635 mm

Year of construction: 2022, condition: as good as new (ex-display), AL-KO grinding table AST 1.5 BASIC The AL-KO grinding table AST 1.5 BASIC is the entry-level model for the AL-KO grinding table program. He is certified according to GS-HO-11 and carries the seal of "Holzstaubgeprueft according to BGI 739-1" THEIR advantages accessible from 4 sides Take loads up to 150kg Hfodpsdqzhbsfx Adwsb Manual, tool-free height adjustment with scale Contrasting sides for edge grinding Workpiece-friendly beech wood grid (removable) Funnel-shaped air Guide to the dust extraction spout TECHNICAL DATA LOAD 1.5 BASIC Intake 140 / 160 mm Required suction power 1.500 m ³/h Negative pressure at the connection at 22 m/s 1.000Pa in DN140mm 700Pa at DN160mm Working height adjustable from 735-1.015 mm Working surface (BxL) 946 x 1, 500 mm Dimensions (Wxl) 1, 000 x 1 600mm Weight 73 kg

Condition: used, Table dimensions 1250 x 750 mm Hjdpoxcp Nwofx Adwofb

Condition: used, Suction collector Suction bell -used- ----- Technical data ----- Connection piece: 300 mm, Nozzle: 5 pieces, Hsdpfsu R S Uyox Adwofb nozzle diameter: 160 mm

Condition: used, with 5 connections. Hfedpslf Izmofx Adwsb Main tube: 310 mm main pipe: 310 mm Connections: 145 mm connections: 145 mm

Year of construction: 2013, condition: like new (used), we sale 3 fire dampers for the isolation of duct penetrations between fire compartments: 1. TROX Technik FKR-01/02-90K, 510x600, year of manufacture 2013. 2. TROX Technik FKR-01/02-90K, 630x600/Z42, year of manufacture 2013. 3. SCHMIDLIN K90, 310x700, year of manufacture 2003 sale in current condition as seen. All are dismantled properly Hfodpfx Adog Rpibswob FCA Oradea, Romania

Condition: used, Dust Cyclone, Dust Separator, Used machine Overall dimensions: 1200 x 1150 x 3270 mm Inlet side: 280 mm Outlet side: 250 mm Hjdjxt Tw Hopfx Adwefb Cylinder shell height: 800 mm

Year of construction: 2020, condition: refurbished (used), For suction diameters from 120 to 700 mm. Please let us know your volume flow and we will select the right cyclone for you. Different versions available: - Legs, made of painted square steel profiles - Rotary valve and transition piece with inspection flap - Inlet box with non-return valve - Tangential outlet with/without pressure relief surface Hfodjftb Ebspfx Adwjb - Square diffuser with/without pressure relief surface - Sound insulation Of course you can also obtain all accessories from us such as fans, exhaust pipes, deflector hoods etc. Functionality: The polluted air is tangentially fed into the cylindrical upper part is introduced, causing the air to rotate. The material is placed under the Influence of the centrifugal force in the direction of the cyclone circumference pressed out and led out through the hole in the bottom. The cleaned air leaves the cyclone through the centrally located Outlet pipe on top. The deposition efficiency increases with the feed rate, but also the pressure loss and thus the energy consumption. It is therefore it's important to find a good compromise. We have developed a range of cyclones optimised for filtering large quantities of material. They are therefore very well suited for the wood/paper/recycling/grain and feed industry At the bottom, the cyclone can be designed with the correct size based on the air volume and a typical pressure drop in the range of 1000 Pa can be selected. Operating pressure +/- 5

Condition: used, functionality: fully functional, - Manufacturer: Dřevo Trust a.s., Loučná nad Desnou - Height: approx. 18 m - Clearance height: 4.8 m Hfedpoxa Eu Rsfx Adwob - Volume: approx. 140 m³ - Shell height: 9 m - Shell diameter: 4.5 m - Discharge motor power: 15 kW - The silo was subsequently equipped with a particulate separator (cyclone)

Year of construction: 2025, condition: new, Dimensions (L/W/H) 800x847x790 mm Hodpfevz E Dlsx Adwjfb Weight 250 kg Total power requirement 7,5 kw

Year of construction: 2001, operating hours: 123 h, condition: ready for operation (used), machine/vehicle number: 123, Metal silo for storage of woodchips, etc. Hjdpfoftdv Ujx Adwsfb Technical description: silo DM: 5m Height: 8 m with outfeeding unit (screw conveyor connection to output) Cappacity: 42 m3 With outfeeding transport screw conveyor to the top of the silo building. Already dismountled, visit possible by appointment at our warehouse H-2013 Pomáz/Hungary.

Year of construction: 2025, condition: new, The AL-KO Sanding table AST 1.5 BASIC is the entry-level model for the AL-KO sanding table program. It is certified according to GS-HO-11 and bears the seal "Wood dust tested according to BGI 739-1". It is therefore suitable for manual grinding as well as for machining workpieces with manual work machines. The grinding table is made of galvanized steel sheet. The workpiece support consists of a removable beech wood grate. It is accessible from all 4 sides. So that several people can work at the same time. Thanks to the sturdy, structurally stiffened construction, workpieces with a weight of up to 150 kg can be processed. In order to adjust the work surface of the AL-KO AST 1.5 BASIC to the required working height, it is equipped as standard with a mechanical height adjustment. The height adjustment is done without any tools by adjusting the feet in scaled grid dimensions. In addition, all feet can be adjusted in millimeters according to the respective ground conditions. The extraction trough is optimized in terms of flow technology. Due to the funnel-shaped design of the trough with integrated air duct, the air stream is directed to the intake socket. Depending on the extraction capacity required, the connection to the customer-specific extraction system can be made via a connection piece Ø 140 or Ø 160 mm. The bending of the machining surface on both two longitudinal sides also allows machining of workpieces on the end face The suction grilles are aligned with the flow connection to the suction port and thus guarantee an optimal extraction result. For cleaning work inside the sanding table, the slat grating can be lifted off and the air duct can be removed by loosening a few screws. The sanding table is delivered pre-assembled, only the feet have to be mounted and adjusted to the required working height. Tender specification AST 1.5 BASIC page 2 from 2 Technical data AST 1.5 BASIC: - Intake socket 140/ 160 mm - Required suction performance 1.500 m³/h - Vacuum on socket at 22 m/s 1.000 Pa bei Ø 140 mm 700 Pa bei Ø 160 mm - Working height adjustable 735 – 1.015 mm - Working surface (W x L) 946 x 1.500 mm - Dimension (W x L) 1.000 x 1.600 mm Hfjdpfx Ajfyadbjdwjb - Weight approx. 73 kg

Condition: new, Year of construction: 2024, functionality: fully functional, Extraction table without rear panel/side panels Technical data: Work surface: 2,000 x 1,000 mm Working height: 850-950 mm (manual adjustment) Width: 2250 mm (including energy bar) Power strip with tool tray: 2x 230 V socket with hinged cover, 2x compressed air couplings, mains cable and main switch Hjdpfx Ajuzf Ihsdwsfb Extraction nozzle Ø 160 mm, with shelf

Year of construction: 2025, condition: new, Dimensions (L/W/H) 910x1200x850 mm Weight 400 kg Hjdpfx Aovz Exvedwjfb Total power requirement 18,5 kw

Year of construction: 2025, condition: new, Dimensions (L/W/H) 880x1037x820 mm Weight 188 kg Total power requirement 11 kw Hjdpfxsvz Ew Es Adwofb

Year of construction: 2025, condition: new, Dimensions (L/W/H) 690x771x790 mm Weight 130 kg Hfodpfx Aovz Enwjdwob Total power requirement 5,5 kw

Year of construction: 2025, condition: new, Dimensions (L/W/H) 1510x1250x1400 mm Weight 600 kg Total power requirement 30 kw Hsdpfevz Enqex Adwsfb

Year of construction: 2025, condition: new, Dimensions (L/W/H) 740x630x1028 mm Hedpfevz Endsx Adwjfb Weight 60 kg Total power requirement 3 kw

Year of construction: 2025, condition: new, Dimensions (L/W/H) 890x1081x830 mm Hfjdpfx Asvz Emaodwsb Weight 268 kg Total power requirement 15 kw

Year of construction: 2025, condition: new, Dimensions (L/W/H) 1410x1130x1295 mm Weight 320 kg Total power requirement 22 kw Hjdsvz Ei Ispfx Adwofb