Used other wood milling machines for sale (48)

Condition: like new (used), Spindle diameter: 40 mm Lenz roller feed for curved elements Smooth speed adjustment Feed motor power: 0.25 kW Feed rotation: left/right Safety switch Gjdpfxez Nd Iae Ap Dobu Manual spindle height adjustment Table width: 104 cm Table length: 98 cm Machine construction: cast iron

Condition: used, used good condition low mileage cleaned functionality tested Manufacturer: Hoffmann Gbedpfez Np Ixsx Ap Deu Model: MU X-line Stop for stub tenon Stop for miter cut New price approx.: 1900.00 Location: 97447 Gerolzhofen, free loading, unpacked Handover in the current condition as inspected, without warranty or guarantee.

Condition: like new (used), spindle diameter 35 mm 5 speeds from 3,000 to 10,000 rpm Gedpfxezx U Nus Ap Dobu motor power 5.5 kW Maggi 4-roller feed with stepless speed control tenoning carriage with angle setting scale worktable 120x730 cm 760 kg year of manufacture 2001 can be purchased without feed unit

Condition: excellent (used), CATALOGUE NUMBER 6607 TECHNICAL DATA Circular saw: - max. saw blade diameter 350mm - spindle 30mm - spindle locking - blade adjustable front/back, up/down - blade guard - motor 1.1kW - dust extraction port diameter 80mm Milling machine: Arbor: Gedpfx Apjzc I Tpo Debu - spindle diameter 40mm - spindle working height 140mm - spindle locking - max. milling cutter diameter 350mm - 2 speed settings 3000, 4500 rpm - motor 5.5kW - brake - side carriage – manual feed - carriage dimensions length/width 1180x600mm - angle ruler - 2 pneumatic clamps - dust extraction port diameter 120mm - dimensions length/width/height 2600 (for shipping 2000)/1600/1450mm - weight 735kg – very good condition – used milling machine Net price: 13900 PLN Net price: 3233 euros, depending on the exchange rate, 4.30 euros (Prices may vary in case of significant fluctuations)

Condition: excellent (used), CATALOGUE NUMBER: 6857 Gbsdpfjzr I Hgox Ap Deu TECHNICAL DATA - Spindle diameter: 30mm - Spindle height: 140mm - Interchangeable spindle - Adjustable up/down - Guide - 4 speed settings + forward/reverse: 3000, 4500, 6000, 9000 rpm - Table dimensions with extension: 1970x990mm - Motor: 5.2kW - Dust extraction port diameter: 1x80mm, 1x120mm - Dimensions (L/W/H): 1920x1050x1130mm - Weight: 550kg ADVANTAGES - German made - Used milling machine - Very good condition Net price: 11900 PLN Net price: 2767 EUR Net price calculated based on an exchange rate of 4.30 PLN/EUR (price may change in case of significant exchange rate fluctuations)

Year of construction: 2004, condition: refurbished (used), 2004 double squaring machine, brand Friulmac model Idramat Gbsdpjzz Rnrsfx Ap Deu Note: see [VIDEO](?share=copy#t=0)

Condition: good (used), Code: 0476 Brand: MASTERWOOD Model: B 1/V - CE Standard Gedpfxezqzhbs Ap Djbu Vertical chisel mortising machine for cutting recesses and grooves in wooden joinery, doors, beams and other items – CE Standard Technical data: Vertical stroke 150 mm Longitudinal stroke 260 mm Transverse stroke 70 mm Motor power 3 Hp Max workable height of solid wood component 170 mm Min/max workable height of assembled window or door frame 740/1030 mm Work surface 140 x 470 mm Tilt +/- 45° Pneumatic workpiece clamping Suction inlet diameter 60 mm Compressed air 6 bar Overall dimensions mm 1000 x 850 x 1750 h Weight kg 440

Condition: good (used), Code: 0125 Brand: OMEC - ITALY Model: F8 - CE Standard Automatic dovetailing machine for dovetail joints on drawers and various furniture elements - CE Standard The machine is equipped with a unit of 8 spindles with equal mill cutters that allow the production of indents of different heights. Gsdswl Iv Rspfx Ap Debu Technical data: No. 8 spindles Spindle revolutions /min 17,000 Maximum working width mm 400 Distance between centres of indents mm 25 Drawers production 120 / hour Power Kw 7,5 Working pressure 6 atm Overall dimensions: mm 1500 x 1000 x 1200 h Weight kg 1100

Year of construction: 1997, condition: excellent (used), machine/vehicle number: 1095, Dear Customers Currently we offer you a universal milling machine for the model and mold making of the brand Zimmermann. Here are the technical data of the machine: Work table: 630 x 490 mm Support table: 490 x 400 mm Round movement: 360 ° Pivoting: 2x 90 ° Tension groove: 14 x 25 mm Power: 1,1 kW Speeds: 560 - 14,000 rpm Tool holder: ISO30 / SK30 - Motorbrake - motor-driven height adjustment - digital read-out with Heidenhain meassuring system - cabinet Space required: 1,400 x 1,520 x 1,970 mm Weight: 790 kg The machine was cleaned completely including the support table. The technical as well as optical condition of the machine is top! We look forward to your questions and inquiries. Gbodpfx Apsxy Ntqs Deu

Condition: excellent (used), For sale: MC9050B industrial round wood rod milling machine, manufactured in 2018, designed for producing round wooden poles and cylindrical wooden components such as tool handles, broom handles, furniture parts, and similar products. Specifications: • Model: MC9050B • Year of manufacture: 2018 • Power supply: 380V (Three-phase) • Working diameter: 15–50 mm • Minimum workpiece length: 600 mm • Main motor: 3 kW • Approximate weight: 350 kg Condition: • Excellent working condition. • Complete machine, ready for immediate use. • Inspection and testing are welcome. Gedpfjzmt U Eex Ap Dobu

Condition: excellent (used), Table length: 230 cm. Table width: 35/90 cm. Angles: 10/45 degrees. Motor: 5/6.2 kW. Spindle: 30 mm. Gbjdszixxnspfx Ap Deu

Condition: new, Year of construction: 2025, • 3kW electric motor • infeed and outfeed table • milling head with adjustable tilt angle up to 270° and vertical travel of 500mm and horizontal travel of 350mm • safety clamp for the sliding table • spindle diameter, standard: 30mm Gjdozqzuhspfx Ap Dsbu • max. tool diameter: 200mm • max. tool height: 130mm • guide length: 152mm • sliding table length: 1100mm • sliding table width: 350mm • overall table width: 750mm

Condition: good (used), For sale is a used Panhans milling machine Type 245 with 8 milling speeds. The machine has been inspected and refurbished by our qualified staff and is in good condition. Technical data: - Double swiveling unit - Swiveling range -45° to +45° - Electrically height-adjustable and swiveling - Overhead control panel - 8 milling speeds - Direction of rotation switch - Motor power 11 kW / 15 HP Godpfx Ajy Nncfop Djbu - Year of manufacture 2002 The machine is located in A-5431 Kuchl and can be inspected at any time during our opening hours. Subject to prior sale! Related terms: milling machine, router, milling Reference: R-S1632

Condition: good (used), Code: 0106 Brand: OMEC - ITALY Model: 650-M Dovetailing machine Technical characteristics: Gbodpfx Apsyg N Hls Dou Installed power on board machine Kw 0,75 Max working width mm 420 Center to center of indents mm 25-40-50-80 Overall dimensions: mm 800 x 720 x 1320 h Weight kg 130

Condition: excellent (used), Motor 9.5 kW, spindle 30 mm, table length 240 cm, width 35/120 cm Gbsdpfxoyy Np Io Ap Deu

Condition: good (used), Year of construction: 1982, functionality: fully functional, Table dimensions: 1400 x 1000 mm Table rotates from 0 to 360 degrees Spindle taper: ISO40 Spindle swivels Minimum spindle speed: 90 rpm Maximum spindle speed: 2880 rpm Machine height: 3260 mm Machine length: 2650 mm Machine width: 2600 mm Machine weight: 5100 kg Godpfx Apey Iwf He Dobu Accessories, equipment: - Built-in rotary table - Rapid traverse - Motorized height adjustment - Machine light The machine is in very good condition.

Condition: good (used), functionality: fully functional, Dovetail cutter / Trapezoidal groove cutter with stops. Gbjdpfxezvn Hbo Ap Dou

Condition: excellent (used), Motor: 4.7/5.7 kW Gbsdpfey S S H Hex Ap Dju Spindle: 30 mm Table length: 100 cm

Condition: excellent (used), Spindle 30 mm, Table width 100 cm, 3-roller feed, Side tables length 110 cm x2 Gedsygxcispfx Ap Dobu

Year of construction: 2005, condition: used, Used Machine Year of Manufacture: 2005 Features and Technical Specifications: - Auertech BL 100A log-house milling machine - H&M feed and positioning table with pusher - For producing chalet corner joints by milling all four sides of the log beam in a single clamping operation - Machining performed by 2 vertical and 2 horizontal milling spindles - Machining dimensions: 140 × 200 mm - Milling shafts: 30 mm - Cutter dimensions: maximum 4 × 220 × 100 mm - Motor power: 2 × 4.0 kW and 2 × 3.0 kW - Speed: 4,200 rpm - Feed: hydropneumatic, infinitely variable, with rapid traverse - Operation: two-hand control or via PLC control - Milling depth adjustment: via spindle with SIKO counter - Workpiece clamping device: 2 × vertical pneumatic Gbjdpfx Apezk Ni He Deu - Dust extraction: underfloor extraction hood, 160 mm - Complete with electrical system, PLC control, and pneumatics - Equipped with integrated end-grooving unit, horizontal drilling unit, and under-table crosscut saw - Enclosed machine housing with swing-up protective cover, gas spring, and viewing window Horizontal clamps in the machine table: - 2 horizontal clamps - Pneumatic actuation from the front - Automatic clamping cycle via the PLC control system Integrated face milling unit: - Milling spindle: 30 mm - Maximum tool dimensions: 180 × 40 mm - Motor power: 3.0 kW - Speed: 4,200 rpm - Feed: hydropneumatic, infinitely variable, with rapid traverse - Height adjustment: via spindle with SIKO counter - Workpiece clamping device: 1 × additional vertical pneumatic clamping - Integrated with electrical and pneumatic systems Integrated horizontal drilling unit: - With drill guide and splinter guard - Drill diameter: maximum 30 mm, 20 mm included - Motor power: 1.1 kW - Speed: 1,500 rpm - Feed: pneumatic, infinitely variable, with rapid traverse for the idle stroke - Height adjustment: via spindle with SIKO counter - Workpiece clamping device: 1 × additional vertical pneumatic clamping - Integrated with electrical and pneumatic systems Integrated under-table crosscut saw: - For automatic operation only - Maximum cutting dimensions: 200 × 140 mm (width × height) - Saw blade diameter: 500 mm - Motor power: 4.0 kW - Cutting speed: 86 m/s - Pneumatic feed - Pneumatic workpiece clamping device - Exhaust funnel: 120 mm - Integrated with electrical and pneumatic systems Automatic Feeding and Positioning: - H&M feeding and positioning table with side pusher - The log is placed manually on the feeding table; it is then automatically positioned by the side pusher and fed into the machine - Mechanical, pneumatic, and electrical systems on the pusher table - Electrical interface for controlling machine functions - Feed table length: 9,000 mm - Discharge table length: 4,000 mm Tools included: Drill, crosscut saw, and end grooving cutters as shown in the machine photos; grooving cutters as shown in the separate photo

Condition: excellent (used), Catalog number 7757 TECHNICAL DATA Milling machine - spindle diameter 25mm - spindle height 120mm - interchangeable, tilting spindle (20 degrees) - spindle locking - adjustable up/down - original guide - table dimensions 1120x750mm - 4 speed settings - motor 3.8Kw Circular saw - max. blade diameter 350mm - spindle diameter 30mm - blade adjustable up/down and at an angle - spindle lock - cutting width with guide 540mm - cast iron table - dimensions (L/W/H) 1260x900x1000mm - weight 610kg ADVANTAGES – Polish production – DTR documentation – used milling machine, very good condition Net price: 6900 PLN Net price: 1605 EUR, depending on the exchange rate of 4.30 EUR (Prices are subject to change due to significant fluctuations) Gbjdpfezr I E Ajx Ap Dju

Condition: used, Milling machine for wood products, Landonio brand, model FMU 2000 Gbedpfoizlirjx Ap Dju

Year of construction: 2018, condition: excellent (used), DOUBLE-SIDE MILLING MACHINE RMD 6030M MINIMUM LENGTH OF WORKING MATERIAL 250MM Godeiu Ia Nspfx Ap Debu MAXIMUM LENGTH OF WORKING MATERIAL 3000MM minimum thickness - 5mm maximum thickness - 85mm tools: - scoring tool can be set vertically, horizontally and at an angle, outer diameter 160-180 mm, opening 25.4-40mm (with a washer) - cutter - the cutter can be moved up and down. left and right and angled. the machine includes a receiving table, a feeding table (separate photo) If you have any questions, please contact me. The machine is practically unused

Condition: excellent (used), IM Very good condition. Gsdpfxev Air As Ap Debu

Condition: used, functionality: fully functional, Wema Probst QF50 Cross-Mill Machine Gbjdowc Tdnjpfx Ap Dsu Cross-Mill machine for processing round timber with a swivel table for adjusting the milling angle. 2 machining stations 1 cross-milling unit 1 drilling unit