Used pillar drills with 20-29mm drilling capacity for sale (82)

Condition: used, bore capacity in steel (diameter) 20 mm Dwodpfx Adstnl Eujdjf throat 155 mm bore stroke 80 mm turning speeds 50 - 3100 U/min 310mm mm total power requirement 1,5 / 400 kW / Volt tool taper 2 weight of the machine ca. 70 Kg dimensions 0,6 x 0.4 x 9,9 mm Bench drill - Rotating and swiveling table

Condition: good (used), Stock no.: 3017 Column Drilling Machine Brand: Gillardon Machine no.: 0150352 Model: GB20 Spindle mounting: MT 2 Table size: 430 x 380 mm Clamping surface: 355 x 305 mm Table adjustability: 600 mm Djdpfxjxdkndj Addewf Throat: 280 mm Stroke: 120 mm Speed range: 60 to 1,400 rpm, stepless Footprint: 360 x 570 mm Column diameter: 100 mm Connection: 0.5 and 1.0 kW Weight: t Dimensions: 430 x 800 x 1,800 mm

Year of construction: 1996, condition: good (used), machine/vehicle number: 337978, Technical data: - Drilling capacity in steel ST 60 25 mm - Drilling spindle holder MK 3 Dwjdpfx Aofmh R Ueddjf - 8 drilling spindle speeds 100 - 2700 rpm - drill spindle stroke 130 mm - 4 feeds 0.1 - 0.3 m/rev - Overhang 270 mm - Column diameter 115 mm - drilling unit + table height adjustable -with crank handle over rack - Table dimension 350 mm - Drive 400 V / 0.8 / 1.1 kW - Space requirement approx. W 800 x H 1850 x D 900 mm - Weight approx. 250 kg

Condition: new, DRILL PRESS WITH BELT DRIVE DIGITAL DEPTH GAUGE, REVERSIBLE TABLE WITH INTEGRATED VISE AND SCORER LED LIGHT Quick-action keyless chuck 1 - 16 mm B18 CM 4 chuck attachment SUPPLIED. Drilling capacity on cast iron with Ø 32 mm pre-hole. Max drilling capacity on steel with pre-hole (s235jr) Ø 28 mm Continuous drilling capacity Ø 20 mm Morse taper 4 Spindle 1 - 16 mm B18 Approximate spindle speed (12) 150 - 2450 rpm Spindle stroke 120 mm Spindle sleeve ø 62 mm Column ø 92 mm Height 1720 mm Spindle-column distance 255 mm Distance from machine nose to table 700 mm Djdpfx Aom E Uhwoddswf Table dimensions 460 x 425 mm Distance machine nose-base 1220 mm Hollow 14 mm Clamp 210 x 165 mm Single-phase motor 230 V 50 Hz 1.5 kW Net weight 135 kg Packaging dimensions 1415 x 655 x 320 h mm Gross weight 158.00 kg

Condition: excellent (used), Drilling capacity in steel (diameter): 23 mm Dsdpfxjuzacge Addswf

Condition: new, Column drilling machine Make: MAXION Model: UNIMAX 3 Dwedpfx Asb Hl Irjddof Condition: New machine Spindle speed (infinitely variable): Range A 80 - 1.440 rpm range B 180 - 3.200 rpm normal drilling capacity: 30 mm standard equipped with: - Full motor protection - reversing switch right/left rotation - digital speed display - table adjustment via toothed rack - drill protection - emergency stop button - instruction manual

Condition: good (used), Year of construction: 2004, bore capacity in steel (diameter) 28 mm throat 300 mm bore stroke 150 mm distance spindle /table 60-765 mm distance spindle/base plate 1.200 mm taper MK 3 threading M20/M24 Dwodpfxowgi Eve Addjf column diameter 115 mm table-size 510 X 425 mm spindle turning speed - stepless 60 - 1:400 U/min total power requirement 1,4 kW weight of the machine ca. 350 Kg. dimensions of the machine ca. 1,9 x 0,6 x 0,9 m - Digital spindle speed display - Foot switch - Thread cutting device - Left-right rotation - 2-speed motor

Condition: new, ELMAG Geared pillar drill GBM 3/25 SNE - Set Fast geared drilling machines 900 / 650 W The more often carbide and stainless steel have to be machined, the more likely it should be a powerful geared drilling machine - also ideal for thread cutting. Thanks to a gear wheel combination made of steel and pressed material, the powerful GBM 3/25 TNE & SNE are particularly smooth-running. With a top speed of 2,900 rpm, you have an optimum cutting speed for small bores. The machines are equipped with clockwise and counter-clockwise rotation for thread cutting. GBM 3/25 TNE & SNE super set offer - Geared bench drill GBM 3/25 TNE or SNE - Machine vice 125 mm - Two clamping screws 14 mm - 9-piece drill cassette, 14.5 mm - 30 mm MK 2 / MK 3 Standard equipment - Quick-action drill chuck B 16, 1 - 16 mm - Taper arbor MK 3 / B 16 - Reducing sleeve MK 3 / MK 2 - Reducing sleeve MK 3 / MK 1 - Drive-out wedge - Operating instructions / CE Set equipment - Geared bench drill GBM 3/25 SNE - Machine vice 120 mm - Two clamping screws 14 mm - 9-piece drill cartridge, 14.5 mm - 30 mm MK 2 / MK 3 - Cutting oil spray ADVANTAGES Drilling capacity Ø 25 mm Cubature 290x250x580 mm Spindle projection 255 mm Powerful drive motor 400 V, 2-stage 900 / 650 W Smooth-running quality gearbox with heavy-duty helical gearing 8 speeds 105 - 2,900 rpm Dwodpfxst Edpwo Addjf Drill spindle with precision bearing Clockwise and counter-clockwise rotation Drill spindle protection cover Drilling depth scale and stop Tool ejector Precisely machined drill table with T-slots and coolant channel Rotatable and height-adjustable drill head Heavy-duty, ground steel column with toothed rack Emergency stop button / zero voltage release With 5 meter connection cable and 16 amp EURO CEE safety plug TECHNICAL DATA Drilling capacity in steel 25 mm Tapping capacity M16 Spindle holder (turning spindle) MK 3 Speed range 105 - 2900 rpm Speed steps 8 Quill stroke 120 mm Column diameter 100 mm T-slots, width 14 mm Drill head stroke 580 mm Drill table stroke 530 mm Spindle projection 255 mm Drill table rotatable ± 180 ° Drill head rotatable ± 180 ° Quill distance table 0 - 840 mm Drilling table surface 500x350 mm Motor power (2-stage) 900 / 650 W Mains connection 400/50 V/Hz Cubature 500x350x840 mm Base plate area (lxw) 400x500 mm Weight 180 kg

Condition: good (used), Year of construction: 1992, machine/vehicle number: 145 K, Offer 24018 Dedpfou At Thox Addewf Technical data: - Drilling capacity in steel ST 60 28 mm - Drilling capacity in steel ST 60 32 mm - Drill spindle holder MK 3 - Drill spindle stroke 150 mm - 9 drill spindle speeds 104 - 1400 rpm - 2 feeds 0.1 / 0.2 mm/rev - throat depth 290 mm - max distance table - drill spindle 780 mm - Table with 2 T-slots 480 x 400 mm - Height adjustable via rack and pinion with hand crank - Drive 400 V / 1.1 / 1.3 kW - Space requirement approx. W 600 x H 2100 x D 900 mm - Weight approx. 420 kg - with: - right - left rotation - Coolant device - Quick-action drill chuck 1-13 - lighting

Condition: new, SERRMAC NEXT 25 PGM DRILL PRESS - DOUBLE SPEED THREE PHASE - NEW "CE" - ROTARY TABLE + VICE Drilling on steel: Ø 25 mm Tapping: M16 Column attachment: CM3 Column diameter: 98 mm Spindle stroke: 100 mm Transmission: pulleys (PU) No. of speeds: 12 No. of revolutions: 164 - 2460 rpm Motor power: 0.75 kW Dedpeuif Sysfx Addjwf Power supply: 380 V - 3 phases Weight: 185 kg

Condition: excellent (used), Year of construction: 1975, ALZMETALL AB 3ES Pillar Drill Drilling capacity in steel St 60 28 mm Drilling capacity in cast iron GG 20 35 mm Drilling capacity in St 60 35 mm Spindle mount MT 3 Throat 290 mm Quill stroke 160 mm Table stroke 592 mm Dwjdpfxowg Hd Ne Addef Column diameter 115 mm Clamping area 510 x 300 mm Spindle speed 130-1750 rpm Machine weight approx. 400 kg Year of manufacture 1975 With coolant system!

Condition: new, Column drilling machine Make: MAXION Model: UNIMAX 2 S TAP Condition: New machine Spindle speed (infinitely variable): Drilling: Range A 100 - 2,000 rpm. Range B 200 - 4.000 rpm. Threading: Range A 100 - 500 rpm Range B 200 - 1,000 rpm Normal drilling capacity: 20 mm standard equipped with: - thread cutting device Dodpfx Ascu Dwmoddjwf - digital speed display - digital drilling depth display - table adjustment via toothed rack - LED machine light - instruction manual

Condition: used, bore capacity in steel (diameter) 23 mm throat 300 mm bore stroke 150 mm table-size 300 x 410 mm Dsdpfofbh Alex Addswf spindle taper MK 2 total power requirement 1,4 kW weight of the machine ca. ca. 315 kg dimensions of the machine ca. ca. 700 x 900 x 1900 mm Machine has fallen over. A sheet metal cover and 2 levers of the cross lever broke off. Concentricity has been tested and is OK. Functional video available. Machine can be viewed and tested on site.

Condition: new, MAXION UNIMAX 3 AV pillar drilling machine Modern, precise production drilling machine based on the proven UNIMAX3 concept, with infinitely variable feed drive, automatic tool ejector and chip breaking control as standard, reversing switch right/left rotation. Feed rate, speed and drilling depth are shown in the display and the drilling depth is programmed. Technical data: Continuous drilling capacity in St 60 25 mm Drilling capacity normal 30 mm Tapping capacity M 20 spindle MK 3 drilling depth 125 mm throat 260 mm Dwodpsgv I U Sjfx Addof distance spindle/table 90 to 840 mm table surface 500 x 400 mm column diameter 110 mm total height 1.900 mm weight 280 kg motor power 0,8/1,5 kW Spindle speed infinitely variable range A 80-1.440 rpm Range B 180-3,200 rpm details see data sheet enclosed - please ask for further models

Year of construction: 1970, condition: good (used), machine/vehicle number: Unbekannt, QUOTE Dsdpfohglvkox Addswf Technical data: - Drilling capacity in steel ST 60 28 mm - Drilling capacity in steel ST 60 32 mm - Drilling spindle mounting MK 3-long spindle - drilling spindle stroke 180 mm - Drilling spindle speeds infinitely variable approx. 140 - 1600 rpm - 3 feeds 0,1 ; 0,2 ; 0,3 mm/rev - throat 290 mm - max distance table - drilling spindle 620 mm - rotary table with 2 T-slots 450 mm - Height adjustable via toothed rack with hand crank - Coolant device - Drive 380 V / 0,9 / 1,3 kW - Space requirement approx. W 750 x H 1900 x D 700 mm - Weight approx. 280 kg

Condition: new, Precise, quiet and reliable drill press. Built to strict accident prevention standards. Precision spindle axis with Djdpfx Aoir Aihoddjwf tempered morse taper, base plate machined. Electronic speed variator included. Rotary table + vise mm 350 X 250. Drilling capacity on steel :R50 mm ø 22. Tapping capacity on steel :R50 mm M 14. Spindle taper :CM2 Spindle stroke :mm 90. Spindle sleeve diameter :mm 52. Column diameter :mm 98. Spindle center column distance :mm 201. Transmission PU Electronic variable speed drive (E). Spindle speed :Rpm 270 ÷ 4,200. Motor power :kW 0.75 / 220 V Single phase. Dimensions :( h x w x d ) mm 1950 x 600 x 680. Weight :Kg 220.

Condition: used, Year of construction: 1978, bore capacity in steel (diameter) 28 mm throat 290 mm bore stroke 180 mm table surface area 515 x 300 mm spindle taper MT 3 spindle turning speed range 65 - 1750 U/min boring spindle diameter 40 mm table adjustable in height 562 mm table swivelable 360 ° distance between table/spindle 79 / 641 mm weight of the machine ca. 0,4 t dimensions of machine L x W x H 0,70 x 0,40 x 1,80 m - machine out of teaching shop - Dwjdpfxjwk N Rae Addjf

Condition: new, Column drilling machine Make: MAXION Model: UNIMAX 3 AVG Condition: New machine Spindle speed (infinitely variable): Range A 80 - 1.440 rpm Dwjdpfobrfmkjx Addof range B 180 - 3.200 rpm normal drilling capacity: 30 mm standard equipped with: - infinitely variable drill feed - infinitely variable speed control - digital display for speed, feed and and drilling depth - automatic tool ejector - operating instructions with the following options: - Tapping device

Condition: used, bore capacity in steel (diameter) 23 / 28 mm throat 260 mm bore stroke 120 mm tool taper MK 3 table-size 500 x 350 mm column diameter 100 mm total power requirement 1,3 kW weight of the machine ca. 400 kg dimensions of the machine ca. 800 x 600 x 1750 mm Machine info - right-left rotation Dedpfx Aed Nxvrjddjwf - stepless speed adjustment - automatic feed 0,1/ 0,16 / 0,25

Condition: good (used), Drill, drill press, pillar drill, pillar drill -Table size: 275 x 215 mm -Spindle mount: MK3 -Projection: 280 mm -Speeds: 200-1450 rpm -Columns: Ø 120 mm -Spindle stroke: 100 mm -Translation via: Gears Dwsdjkw H D Rspfx Addof -Number: 1x drilling machines available -Price per piece -Dimensions: 360/600/H1945 mm -Weight: 230kg

Condition: good (used), Year of construction: 1985, machine/vehicle number: 16924, Offer 22090 Technical data: - Drilling capacity in steel ST 60 20 mm - Drill spindle holder MK 2 - Drill spindle stroke 120 mm - 4 drill spindle speeds 400 - 2000 rpm - throat depth 250 mm - Max. distance table - drill spindle 720 mm - Table with 2 T-slots 440 x 360 mm - Height adjustable via rack and pinion with hand crank - Drive 380 V / 0.6 kW - Space requirement approx. W 550 x H 1900 x D 850 mm - Weight approx. 260 kg Dwjdjtz T Dvspfx Addof - with: - Drill chuck 3 - 12 mm

Condition: new, SERRMAC ETD 22 DRILL PRESS - PGM Turntable + Clamp Dwjdpfxjgyggzs Addof Precise, quiet and reliable Direct drive via INVERTER without pulley change Precision spindle axis with hardened morse taper Power supply 380V 3 Ground column. Standard configurations : - Digital display with spindle speed indication - Tapping with working depth adjustment - 24 V LED lighting system - Electronic membrane control panel - Spindle rotation reverse button Drilling on steel mm: Ø 22 Tapping: M16 Cone attachment: CM2 Column diameter mm: 98 Spindle stroke mm: 120 Transmission: Direct with Inverter No. speed: Variable No. rpm: 265-4200 Motor : kW 1.8-2.5 / 380V 3-phase. Power supply V 380V 3 Weight Kg 240 Column

Condition: excellent (used), Year of construction: 1990, High precision drilling and milling machine Aciera 22 VA Good condition from school use Year of manufacture approx. 1990 table 600 x 320 mm speed 40 - 3600 rpm speed adjustment rpm 4 automatic feeds Dwodpfx Adohqm D Njdef 40-280 80-560 275-1800 550-3600 spindle diameter 65 mm drilling spindle stroke 120 mm spindle adaptor: Aciera quick change system Automatic thread cutting system Drilling capacity in solid material 25mm Max drilling capacity up to 30mm Height adjustment via hand crank Motor: 1,1 KW Lamp Some quick change adapters Dimension WxDxH 90 x 130 x 185 cm Weight approx. 800 kg Technical data under reserve

Condition: used, bore capacity in steel (diameter) 28 mm throat 200 mm bore stroke 105 mm spindle taper MK 3 number of spindle speeds 12 Dwedpofbh Aksfx Addjf spindle speed: 35 - 5600 Upm column diameter 92 mm table-size 340 x 360 mm table rotating 360 ° total power requirement 1,5 kW weight of the machine ca. ca. 170 kg dimensions of the machine ca. ca. 750 x 500 x 1800 mm

Condition: ready for operation (used), SERRMAC column drill Mod. RAG 30 The used column drill SERRMAC RAG 30 PGM is complete with turntable and vice. The speed adjustment is via pulleys - belt. Drilling capacity on steel: mm ø 30. Spindle cone: CM3 Spindle stroke: mm 100. Dwsdswm Exlepfx Addef Pulley transmission. Power supply: 380V 3Ph. Weight: Kg 300. Used item in excellent condition. Available for immediate delivery unless sold. A wide assortment of new and used column drills visible on site.