Used press brakes with 100-119t bending force for sale (124)

Condition: used, Year of construction: 2021, Max. pressure 100 ton Max. bending length 3060 mm Distance between uprights 3384 mm X-axis movement 600 mm Length of stroke (extended) 350 mm Daylight (Extended) 580 mm Automatic crowning on lower tool base Bcsdpjxr U Nhsfx Afhsu Controlled axis: Y1, Y2, X1, X2, Z1, Z2, R1 & R2 Control: Trumpf T3500T (3D colour/grafic visualization ) Equipped with: Tool package for 15.000 euro. 2 manual “lay up” arms Trumpf manually quick clamp top tool holders in full width - made by Wila Machine appears as brand new. Price when bought in 2021: Euro. 115.000

Condition: excellent (used), functionality: fully functional, Year of construction: 2000, operating hours: 17,446 h, control type: CNC control, actuation type: hydraulic, controller manufacturer: DELEM, controller model: DA65, bending force (max.): 110 t, working width: 3,100 mm, number of axes: 8, oil tank capacity: 130 l, overall weight: 8,900 kg, total length: 3,300 mm, total width: 2,000 mm, total height: 2,440 mm, power: 11 kW (14.96 HP), input voltage: 400 V, Equipment: CE marking, documentation/manual, emergency stop, european tool clamping system, foot remote control, lower tooling, safety light barrier, upper tooling, For sale: Used press brake DARLEY EHP-L 110 31/25, year of manufacture 2000. The machine is in excellent technical condition and is highly reliable. Very precise and offers repeatable results. In December 2023, all cylinder seals as well as the hydraulic oil and filters were replaced. In February 2024, the upper WILA tool clamping system was serviced. The machine has very few operating hours. Bcsdpfx Aox N Ibhefheu Hydraulics: Hoerbiger Machine number: 122067 Machine type: EHP-L 110 31/25 Year of construction: 2000 Maximum pressing force: 1100 kN Working length: 3100 mm Power: 11 kW Voltage: 400 V Hydraulic oil tank capacity: 130 l Hydraulic system pressure: 28 MPa Weight: 8,900 kg Tooling type: Hydraulic Wila / Trumpf Control: DELEM DA65 Number of axes: Y1, Y2, X1, X2, R1, R2, Z1, Z2 + crowning compensation If you have any questions or would like more information, please send us a message or contact us by phone.

Condition: excellent (used), functionality: fully functional, Year of construction: 2006, Kingsland HACO ERMS 30 – 100 CNC Pressbrake Bcodpfx Afowwvx Dshsu Model: ERMS 30 – 100 Year: 2006 Control: ATS 560 Capacity: 100 Ton x 3100mm Max. Bending Length: 3100mm Distance Between Columns: 2550mm Machine with: Light Guards Full length top and bottom tooling

Condition: excellent (used), functionality: fully functional, Year of construction: 2006, Details: Brand: Trumpf. Model: TrumaBend V 500. Year of manufacture: 2006. Condition: As good as new. Technical specifications: Press force: 50 t. Bending length: 1,275 mm. Bsdpfxox R R Hvo Afhocu Standard width: 1,040 mm. Stroke: 215 mm. Available installation height: 385 mm. Throat depth: 420 mm. Total connected load: 10 kVA. Technical equipment: Drive: Electrohydraulic via proportional valves. CNC back gauge: Rack-and-pinion drive for X and R axis. Upper tool clamping: New Standard Clamping II (manual). Lower tool clamping: Hydraulic, 2 programmable positions. Safety features: Side and rear doors for safe operation. Control cabinet: Air-conditioned and network compatible. Dimensions: 2,200 × 2,000 × 2,400 mm (L × W × H). Weight: approx. 4,900 kg.

Condition: good (used), functionality: fully functional, Year of construction: 2010, operating hours: 17,000 h, control type: CNC control, bending force (max.): 120 t, working width: 3,060 mm, overall weight: 8,300 kg, Equipment: CE marking, documentation/manual, emergency stop, foot remote control, A solid simple press brake with low working hours in good condition. Demonstration under power is possible. No tools included! Bcjdpfx Afsx Nax Ejhju Free loading onto truck.

Condition: excellent (used), functionality: fully functional, Year of construction: 2007, operating hours: 64,000 h, machine/vehicle number: 20306061, working width: 3,110 mm, stroke length: 200 mm, throat depth: 415 mm, distance between stands: 2,700 mm, pressing force: 100 t, Amada Astro II 100 NT bending cell. Includes loading robot, bending robot, repositioning device with extra support, loading table, conveyor for unloading pallets (currently disconnected), safety fence. Comes with multiple loading and bending grippers, both clamp and vacuum type. Worksheet loading both as stack or vertical loading unit. Bending force: 980kN Table length: 3110 mm Stroke: 200 mm Open height: 500 mm Bcsdpfx Aewakicofhsu Worksheet thickness min: 0.6 mm Worksheet dimensions min: 150 x 150 mm Worksheet dimensions max: 800 x 1000 mm/ 300 x 1800 mm Worksheet mass max: 20 kg (including bending robot gripper/ loading robot gripper) Serviced by local Amada representative.

Condition: new, pressure: 100bending length: 2500column width: 2100daylight: 365stroke lenght (max.): 180column throat depth: 300messurements (LxWxH): 3760 x 2150 x 2450weight approx.: 6500motor power: 5,5          Standard equipment: KK-Industries GmbHhas the general agency of the KK Kletzer group of companies. We have put together a high-quality model for Europe. The CNC press brake KK-Industries made by KK Kletzer bursa Turkey Model KK Kletzer Europa Compact The strong press brake KK Kletzer Europa Compact  is characterized by its high precision, accuracy and versatile application. KK Kletzer Europa Compact   press brake distinguishes itself by its high precision, accuracy and versatility. We focus on quality, which is also reflected in the control system. As standard control we have the high-quality controls from Italy 10 2 D with simplest programming Furthermore, the press brake KK Kletzer Europa Compact  is equipped with Y1, Y2, X CNC axes via the control. Even with the top tool and the die we make no compromises and equip the CNC press brake KK Kletzer Europa Compact   with quality tools from EUROSTAMP Italy. or Rolleri Italy. Of course, every machine is just as good as the service. That's why we put our focus on highly qualified employees with long experience in the CNC sheet metal working area. CNC axes Y1, Y2, X Control 2 D 10 Backgauge with double linear guidance and ball screw centrally adjustable crowning device 2 pcs Aulfagearme front heavy version Height adjustment on linear guide Laser protection device on the upper beam CE protection options: CNC R-axis     EURO 4.300,- Bedpfx Asd Iy Tvofhecu CNC crowning EURO 2.600,- Distributed by: KK-Industries GmbH Tel: 0043 (0)664 380 7776 There's something for everyone!

Condition: excellent (used), Year of construction: 2005, Technical specifications: Bjdpfxev I Sp Ij Afhjcu Working length: 3100 mm Column width: 2650 mm Press force: 100 tons CNC control: AMADA AMNC PC 3D-graphic 15-inch TFT color screen Controlled axes: Y1/Y2; X1/X2; R1/R2; Z1/Z2 Dual speed of the X, R, and Z axes Automatic crowning Motorized adjustable backgauge Thrust: 550 mm Stroke: 350 mm Working height: 960 mm Laser monitoring: FIESSLER Motor power: 9 kW Dimensions (length x width x height): approx. 4300 x 2300 x 2950 mm Weight: approx. 8 tons Accessories: 1 set of segmented AMADA tools The seller is not liable for typing or data transmission errors. The machine's appearance, technology, and wear are commensurate with its age; used machines are sold without any warranty.

Condition: used, Year of construction: 1997, The bending press was manufactured in 1997 in England by EDWARDS PEARSON. The folding press is in good condition, sold with tools. Always serviced and maintained on time. The machine tools are connected and can be tested and inspected. Specification: Model: EDWARDS PEARSON 100/3100 PR6 Year: 1997 Working length: 3 100 mm Bending capacity: 100 T Travel: 172 mm Distance between table and frame: 450 mm Working speed: 100 mm/s Return speed: 110 mm/s Axes: auto X1, X2, Y1, Y2, Z1 , Z2 , R Bedporfx Utofx Afhscu Tools: Available Weight: 7 T Other: New screen recently replaced, keyboard attached for ease of use. If you have more questions, we will be happy to answer.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2012, operating hours: 36,823 h, machine/vehicle number: PB180723002012, control type: CNC control, degree of automation: semi-automatic, actuation type: electric, controller manufacturer: Prima Power, bending force (max.): 100 t, working width: 3,000 mm, distance between stands: 3,000 mm, installation height: 2,696 mm, number of axes: 5, overall weight: 7,000 kg, total length: 4,408 mm, total width: 2,381 mm, total height: 2,696 mm, power: 10 kW (13.60 HP), input voltage: 400 V, input frequency: 50 Hz, number of support arms: 2, Equipment: CE marking, documentation/manual, emergency stop, foot remote control, lower tooling, safety light barrier, upper tooling, For sale: fully functional press brake. The machine can be inspected by appointment. Tool holders: Wila. Offline programming software: Autopol G2. 3D visualization. Upper and lower tools available at an additional cost. Bsdpfoxt Rcyjx Afhjcu

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1992, controller model: Cybelec DNC 70, bending force (max.): 110 t, stroke length: 200 mm, distance between stands: 3,050 mm, working length: 3,550 mm, TECHNICAL DETAILS Bcedpfx Afsxxqtcehju Press force: 110 t Bending length: 3,550 mm Distance between uprights: 3,050 mm Frame throat depth: 400 mm Ram stroke: 200 mm MACHINE DETAILS Control system: Cybelec DNC 70 Drive power: 15 kW Weight: 9,500 kg

Condition: excellent (used), Year of construction: 2005, control type: CNC control, bending force (max.): 120 t, working width: 3,100 mm, operating speed: 10 mm/s, reverse speed: 120 mm/s, back gauge travel distance Z-axis: 1,000 mm, Max. bending length: 3100mm Distance between column: 2550mm Max. pressing force: 120T Dis. Beam - Table: 470mm Beam stroke: 180mm Troth beam: 400mm Approch speed: 200mm/min. Working speed: 10mm/min. Return speed: 120mm/min. Adjustment X-Axis back gauge:1000mm Number of controlled axis: Y1 / Y2 / X / Z1 / Z2 / R-Central Crowning: Yes Hydraulic toolclamping: Yes Power: 7.5kW Length: 5700mm Width: 1800mm Height: 3100mm Weight: 9650kg Bjdpfxexzf Dze Afhecu Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), Year of construction: 2005, control type: CNC control, bending force (max.): 120 t, working width: 3,100 mm, distance between stands: 2,550 mm, operating speed: 10 mm/s, reverse speed: 120 mm/s, Max. bending length 3100 mm Distance between column 2550 mm Max. pressing force 120 T Dis. Beam - Table 470 mm Beam stroke 180 mm Troth beam 400 mm Bcedpjxyw Sbjfx Afheu Approch speed 200 mm/min. Working speed 10 mm/min. Return speed 120 mm/min. Adjustment X-Axis back gauge 1000 mm Number of controlled axis Y1 / Y2 / X/ Z1 / Z2 / R-Central Control TS1 Crowning Yes Hydraulic toolclamping Yes Power 7.5 kW

Condition: good (used), functionality: fully functional, Year of construction: 2010, operating hours: 15,996 h, overall weight: 6,750 kg, input voltage: 400 V, 1000 KN Max. stroke: 200 Weight: 6750 Noise level: 74 dB Year of manufacture: 07/2010 Voltage: 400 V / 50Hz Rated current: Current operating hours: 15,996 hours with manual angle measurement and correction system with safety laser UVV inspection on a regular basis / maintenance always carried out by Amada on a regular basis Accessories: Tool die: 2 pieces UKB 20.478 V8/12 30° 835mm 3 pieces UKB 20.344 V4/V7 88° 835mm Tool holder: 4 pieces UKB substructure for double V die 20.287 + 60.919 835mm Bending swords: 5 pieces UKB 10.261 H100 R0.6/90° Bedpfx Afjtwliwshecu 2 pieces UKB 11.158 H80 R0.6/30° 2 pieces UKB 11.200 H66 R0.8/90° Other: Light barrier in need of repair (new price approx. €4500) – separately as a replacement as an attachment (has been renewed) The machine can be inspected under power in DE84051 Mettenbach by appointment. Sale only to commercial customers and with exclusion of any warranty!

Condition: excellent (used), functionality: fully functional, Year of construction: 2019, operating hours: 634 h, control type: CNC control, controller model: CN DELEM T3500T, bending force (max.): 100 t, working width: 3,060 mm, stroke length: 350 mm, distance between stands: 3,384 mm, installation height: 500 mm, type of crowning: CNC-controlled, TRUMPF TRUBEND 3100 Press Brake (X) Version with Increased Clearance to 500 mm Only 634 hours powered on! Protective laser CNC crowning table DELEM T3500T CNC control CNC axes: Y1/Y2/X/X2/R/Z1/Z2 Year: 2019 Currently tooled for a bending length of 2550 mm 1 die (V6 mm) with a length of 2550 mm included as additional equipment. MACHINE NOT ANCHORED TO FLOOR Specifications Bending length: 3060 mm Capacity: 100 tons Frame gap: 3384 mm Bodpfox E Ag Dsx Afhscu Ram stroke: 350 mm Motorized backgauge travel: 560 mm Distance table-to-ram: 500 mm Main drive power: 24 KVA Weight: 8,300 kg Machine dimensions (L x W x H): 3,607 x 1,644 x 2,800 mm

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2016, operating hours: 50 h, machine/vehicle number: 2390, bending force (max.): 100 t, stroke length: 140 mm, throat depth: 300 mm, distance between stands: 2,600 mm, overall weight: 6,650 kg, TECHNICAL DETAILS Bending force: 100 t Cylinder stroke: 140 mm Open width without tooling: 345 mm Distance between uprights: 2,600 mm Throat depth: 300 mm Approach speed: 160 mm/s Bending speed: 10 mm/s Return speed: 130 mm/s Rotational speed: 1,500 rpm MACHINE DETAILS Control system: DA 66 T Bcodjx Eyv Nepfx Afhju Oil capacity: 125 L Total weight: 6,650 kg Power: 7.5 kW Voltage/Power supply: 400 V AC Control voltage: 24 V AC/DC Operating hours: under 50 h

Condition: excellent (used), Year of construction: 2001, AMADA MODEL HFE 103L LONG STROKE 100 tons capacity x 3000 bending length hydraulic downstroking press brake complete with OP 2000 7 AXIS cnc control, machine mounted electronic guards , side and rear interlocked fencing Model Amada HFE 1O3 L downstroke CNC Press brake Year 2001 Tonnage 1000 KN Bedpou Iukfjfx Afhocu Type OP 2000 CNC Controlled Axis Y1, Y2, X, R Max. Bend Length 3000 mm Open height 620 mm Stroke Length 350 mm Approach Speed 100 mm/sec Bending Speed 1 - 10 mm/sec Return Speed 1-100 mm/sec Oil Capacity Motor Power 7.5kw Weight 7600 kg Bed Length 3000 mm Bed Width 60 mm Open Height 470 mm Throat Depth 420 mm CNC Control Max gauge 1000mm R axis 250mm can be demonstrated under power BROCHURE AND FURTHER INFORATION AVAILABLE UPON REQUEST

Condition: excellent (used), functionality: fully functional, Year of construction: 2014, 4 AXIS CNC BACKGAUGE BEAM LENGTH: 3100mm BENDING CAPACITY: 100 TONNES BEAM WIDTH 60mm DISTANCE BETWEEN FRAMES: 2705mm THROAT DEPTH: 420mm OPEN HEIGHT: 470mm Bcedpfx Aewphqiefhou STROKE 200mm WORKING HEIGHT: 960mm AMADA TOP TOOL HOLDERS

Condition: excellent (used), functionality: fully functional, Year of construction: 2021, operating hours: 7,484 h, machine/vehicle number: 2962, stroke length: 300 mm, overall weight: 9,230 kg, pressing force: 100 t, pressing speed: 10 mm/s, travel speed (max.): 200 mm/min, working length: 3,100 mm, Press brake Rico PRCN 30100 Serial number: 2962 Year of manufacture: 2021 Commissioned: 2022/01 Bcsdpjxufwuefx Afhou Operating hours: 7,484 h Warranty: No Control system: Delem DA-66T Technical specifications: Working length: 3,100 mm Pressing force: 100 t Ram stroke: 300 mm Approach speed: 200 mm/s Working speed: 10 mm/s Weight: 9,230 kg Light curtains – rear protection AKAS LC II F (Fiessler) – front safety laser Double manual upper clamping – Promecam Rico crowning table (3,000 mm) – CNC crowning, manual clamping

Condition: used, functionality: fully functional, INDUMAC FOLDING MACHINE Bodpfx Afjxltgxshscu 4000 X 100 TON WITH REGISTER USED MACHINE INTERNAL CODE: SVR 290

Condition: used, functionality: fully functional, BARIOLA PRESS BRAKE 3050 X 100 TON ESA CNC 4 AXES Bjdpfx Afoxlr Uhjhecu MODEL PBI 100/30NCS DISTANCE BETWEEN FRAMES: 2600 mm STROKE: 150 mm WEIGHT: 7000 KG WITH CROWNING TABLE USED MACHINE INTERNAL CODE: SVR 360

Condition: like new (used), functionality: fully functional, control type: CNC control, LVD BENDER 3000 X 110 CYBELEC CNC 3 AXES Bcsdsxf H Rqopfx Afhsu MOTORIZED REGISTER USED MACHINE INTERNAL CODE: SVR 249

Condition: used, Year of construction: 2011, Pressure 100 t Bsdpown D U Ujfx Afhocu Bending length 2050 mm Stroke 315 mm Weight 8,000 kg Accessories: -Support arms -Lasersafe

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2000, operating hours: 99,800 h, control type: CNC control, degree of automation: automatic, bending force (max.): 100 t, working width: 3,000 mm, overall weight: 6,800 kg, Amada HFE 100-3 – 100 Ton CNC Press Brake Bcjdpoxp Nqzjfx Afhou Discover precision and reliability with this Amada HFE 100-3 press brake, perfect for demanding sheet metal work. Built by Amada, a leader in press brake technology, this machine delivers consistent, high-quality bends with excellent repeatability. Key Specifications: Tonnage: 100 tons – ideal for medium to heavy sheet metal work Working Length: 3000 mm – accommodates large panels Stroke: 200 mm – precise forming capabilities CNC Control: 6-axis Y1, Y2, Z1, Z2, R1, R2 Back Gauge Travel (X-axis): 500 mm, Y-axis: 200 mm – accurate positioning Speed: Fast approach and return (100 mm/s) with precise working speed (10 mm/s) Highlights & Features: Energy-efficient hydraulic system designed by Amada Servo-controlled back gauge for fast, accurate bends Compatible with all standard Amada tooling Original electrical cabinet and hydraulics in perfect condition Robust, durable design built to last This Amada HFE 100-3 is a reliable workhorse that combines precision, speed, and flexibility – perfect for workshops looking to expand their production capabilities Please verify all technical specifications with the seller.

Condition: good (used), functionality: fully functional, Year of construction: 2007, operating hours: 13,800 h, AMADA ASTRO II 100 NT bending cell Automatic bending/folding cell - press brake with bending robot Manufacturer: AMADA Bjdpoxgbmcsfx Afhjcu Type: ASTRO 100 NT Year of construction: 2007 Condition: used Control: AMNC II PC Switch-on hours: 38536h Automatic operation: 13739h Pressing force: 100 tons bending length: 3000 mm Tool clamping: AMADA, standard Clearance between uprights: 2700 mm Projection: 415 mm Stroke: 200 mm Installation height: 500 mm Adjustment range backgauge: 600 mm Width of the work table: 60 mm