Used roll benders (motor-driven) for 6.1 - 14mm sheet thickness for sale (137)

Condition: new, Ostas 3-roll round bending machine SMR-S 1570 x 170 Dsdeiw D Smspfx Aptskt Technical specifications: Special equipment included in the price: motorized adjustment of the lower roll hardened rolls motorized adjustment of the rear roll 2 x digital display Sheet metal width 1570 mm Sheet metal thickness 8.0 mm max. Sheet metal thickness 7.0 mm for pre-bending Roll length 1570 mm Smallest diameter 255 mm Roll diameter 170 mm Weight 1960 kg Dimensions L-W-H 3200 x 920 x 1260 mm Motor 5.5 KW Equipment: Top and bottom rolls driven electrically Top roll can be swiveled out Taper bending device Asymmetrical roll arrangement Self-braking main motor Separate control and operating panel Safety cable, CE marking Values apply to St-37 / 240 N/mm²

Condition: new, Isitan Hydraulic 4-Roll Round Bending Machine 4R HMS 2050x200 2 Speeds Top and bottom rolls driven Hydraulic side roll adjustment 3 Digital displays Hydraulic folding bearing Hardened rolls Tapered bending device Separate control panel Useful length: 2050 mm Top roll diameter: 200 mm Side roll diameter: 180 mm Total motor power: 5.5 KW Working speed: 3 m/min. – 6 m/min. Weight: 3750 kg Dimensions (mm): 3850 x 1350 x 1290 (L x W x H) Bending performance data Dksdpfx Apjh Ar Dujtet 10 mm at the smallest inner diameter of 1000 mm (5 x top roll) 8 mm at the smallest inner diameter of 300 mm (1.5 x top roll) Edge bending performance data 8 mm at the smallest inner diameter of 1000 mm (5 x top roll) 6 mm at the smallest inner diameter of 300 mm (1.5 x top roll) All bending capacities are calculated based on a yield strength of 250 N/mm2 Material (ST 37 - ST 42 structural steel)

Condition: new, sheet width 2070 mm plate thickness 10 mm pre-bending 8 mm total power requirement 7 kW weight of the machine ca. 5 t Dodpfx Ajvn U H Asptokt dimensions of the machine ca. 4050 x 1470 x 1550 mm

Condition: new, Fastech 3-Roll Round Bending Machine FRS-S 2050 x 190 Technical Specifications: Special equipment included in the price: hardened rolls motorized rear roll adjustment motorized lower roll adjustment 2 x digital display Sheet metal width 2050 mm Sheet metal thickness 7.0 mm max. Sheet metal thickness for pre-bending 6.0 mm Roll length 2050 mm Roll diameter 190 mm Smallest bending diameter 285 mm Weight 2,695 kg Dimensions L-W-H 3600 x 1100 x 1200 mm Motor: 4 kW Equipment: Top and bottom rolls electrically driven Top roll can be swung out Taper bending device asymmetrical roll arrangement self-braking main motor separate control and operating panel Dodpfx Ajhzq D Uoptekt Safety cable Values apply to St-37 / 240 N/mm² CE marking

Condition: new, Ostas 3-Roll Round Bending Machine SMR-S 1070 x 130 Technical Specifications: Special equipment included in the price: Dkodpfx Aoiw D Dxoptst Hardened rolls Motorized rear roll adjustment Digital display Sheet metal width 1070 mm Sheet metal thickness 7.0 mm max. Sheet metal thickness 6.0 mm for pre-bending Roll length 1070 mm Smallest diameter 195 mm Roll diameter 130 mm Weight 1150 kg Dimensions L-W-H 2550 x 630 x 1020 mm Motor 3.75 kW Equipment: Top and bottom rolls, electrically driven Top roll can be swung out Taper bending device Asymmetrical roll arrangement Self-braking main motor Separate control and operating panel Safety cable, CE marking Values apply to St-37 / 240 N/mm²

Condition: new, Ostas 3-Roll Round Bending Machine SMR-S 1070 x 130 Dkedjiw D Dmepfx Aptst Technical Specifications: Special equipment included in the price: hardened rolls motorized rear roll adjustment digital display sheet metal width 1070 mm sheet metal thickness 7.0 mm max. sheet metal thickness 6.0 mm for pre-bending roll length 1070 mm smallest diameter 195 mm roll diameter 130 mm weight 1150 kg dimensions L-W-H 2550 x 630 x 1020 mm motor 3.75 kW Equipment: top and bottom rolls driven by electric motor top roll can be swung out conical bending device asymmetrical roll arrangement self-braking main motor separate control and operating panel safety rope, CE marking Values apply to St-37 / 240 N/mm²

Condition: new, functionality: fully functional, Year of construction: 2026, 4 HEL 3128 Four rolls bending machine Electronically controlled, hydraulic four-rolls bending machine Make FACCIN, model 4 HEL 3128 Technical specifications: Number of Rolls: Four Geometry of the side rolls: linear guides Working width: 3050 mm Top roll diameter: 285 mm Lower roll diameter: 275 mm Side rolls diameter: 205 mm Certified rolls hardness: 950-1050 N/mm² Pressure force against the top roll: 150 tons Working pressure at maximum power: 190 bar Guaranteed installed power: 11 kW (15 hp) Guaranteed maximum rotation speed: 4-8 m/min Guaranteed machine weight: 9,000 kg Length: 5,450mm Width: 1,520mm Height: 1,450mm Guaranteed capacities: for material with a yield point of 260 N/mm² Rolling capacity (full working width) 12 mm Bending capacity (full working width) 8 mm from a pipe diameter of 1,425 mm Rolling capacity (full working width) 8 mm Bending performance (full working width) 6.5 mm from pipe diameter 370 mm Standard equipment: Dodpfx Apoiink Sjtskt Double linear guide system for rolls movement Extremely wide bearing blocks MCS double bearing system for the rolls rotation Extra heavy double hinged folding release Electronic parallelism system EPS Hardened rolls for high wear protection All rolls ground after heat treatment Siemens S7 PLC control Hitech hydraulic and electric package Safety trip wire with emergency stop and CE certification central lubrication cone bending device FACCIN AP package CNC control PGS-ULTRA

Condition: new, - Capacity: 1570 x 9 mm - Electrically adjustable follower roller - Electrically adjustable lower roller (material clamping) - Digital display for rear roller movement - Digital display for lower roller movement (material clamping) - Hardened rollers Dsdpfx Aog Ntlcsptjkt - Conical rollers - Removable top roller - Central lubrication system - Brake motor - Emergency stop - Documentation - 400V

Condition: new, - Capacity 1070 x 8 mm - Electrically adjustable rear roller - Electrically adjustable bottom roller (material clamping) - Digital display for rear roller movement - Hardened rollers - Conical rollers - Central lubrication system - Emergency stop - Documentation: Digital display for lower roller movement (material clamping) - Hardened rollers - Conical rollers - Rotatable upper roller Dkodegg N R Ajpfx Aptjt - Central lubrication system - Brake motor - Emergency stop - Documentation - 400V

Condition: new, neu ca. 2 Wochen ab Auftragse Italien 2000 mm 11 mm 11 mm 7 mm 8 mm 6.4 mm 225 mm 215 mm 165 mm 8 m/min 3950 mm 1200 mm 1200 mm 4450 kg Hardened and polished rollers Numerical control Siemens PGS-Classic with touchscreen Cone bending with electronic control and inclination of the bottom roller oil cooler Simultaneous rotation and roller movement Simultaneous roller and support movement Possibility to bend variable radii (ovals, ellipses, etc.) Hydraulic micro-positioning by the PLC for higher accuracy Infinitely variable speed for roller movement Infinitely variable speed for rotation Prepared for retrofitting supports (up to 5 axes) Prepared for retrofitting loading/unloading stations Dedpfx Aeypbp Rsptokt Prepared for retrofitting CNC controls Extra large, double hinged drop end Electronic parallelism system for the synchronization of the rollers Hydraulic lifting of the top roll (for models with a top roll diameter of 205 mm or more) Double linear guide for the movement of the lower rolls Ultra wide rolls blocks "MCS" bearing system for the lower rolls (4 large bearings on each shaft) Central lubrication system Pressure manometer for constant pinch roll control Extra torque and special braking system Safety cord with emergency stop Equipped according to "CE" regulations OPTION: CNC control Siemens PSG-Absolute with 15" touch screen (automatic calculation of the process for simple and complex shapes)

Condition: new, Ostas 3-Roll Round Bending Machine SMR-S 2070 x 190 Technical Specifications: Special equipment included in the price: Motorized adjustment of the lower rolls Hardened rolls Motorized adjustment of the rear rolls Digital display Dodpeg Nz T Isfx Aptekt Sheet metal width 2070 mm Sheet metal thickness 7.0 mm max. Sheet metal thickness for initial bending 6.0 mm Roll length 2070 mm Smallest diameter 285 mm Roll diameter 190 mm Weight 3480 kg Dimensions L-W-H 3750 x 920 x 1260 mm Motor 4 kW Equipment: Top and bottom rolls electrically driven Top roll can be swung out Conical bending device Asymmetrical roll arrangement Self-braking main motor Separate control and operating panel Safety cable, CE marking

Condition: new, sheet width 1000 mm plate thickness 8,0 mm distance between columns 1070 mm diameter of upper rolls 150 mm pre-bending capacity 6,o mm connected load 4,0 kW weight of the machine ca. 1,4 t dimensions of the machine ca. 2,6 x 0,65 x 1,1 mm - Electrically adjustable rear roller Dksdpfofv H A Hjx Aptst - Electrically adjustable lower roll (material clamping) - Digital readout for rear roller movement - Digital readout for lower roll movement (material clamping) - Hardened rolls - Conical rolling - Swiveling top roll - Brake motor - Emergency stop - Documentation - 400V

Condition: new, sheet width 1570 mm plate thickness 10 mm pre-bending 8 total power requirement 7 kW weight of the machine ca. 4,5 t Dkedpfx Apsvkixxetjt dimensions of the machine ca. 3,5 x 1,5 x 1,55 m

Condition: new, functionality: fully functional, Year of construction: 2025, The EVO is the latest innovation in sheet metal processing. It is equipped with numerous innovative and patented features that increase your production capacity and productivity while simultaneously offering the lowest overall operating costs. The high-quality components used in this machine, as well as the latest version of the BENDtronic® control, which is installed as standard on all EVO machines, are particular highlights. HAEUSLER EVO 21015 4-roll round bending machine / roll bending machine Manufacturer: Haeusler Type: EVO 21015 4-roll round bending machine / roll bending machine Origin: Germany / Switzerland Condition: NEW, showroom machine Availability: 12-14 weeks Performance: Working width 2100 mm Round bending capacity 12 mm Pre-bending capacity 9 mm Standard equipment: • Variable oscillation adjustment of the side rolls VSA® • HAEUSLER Hybrid Drive System HHDS® • Movable 21.5" touch control panel including high-end BENDtronic® control • Infinitely adjustable rotation speed between 0 and 8 m/min • Machine prepared for remote maintenance • Electro-mechanical locking system for the rotation of the top roll • Automatic pressure adjustment of the bottom roll • Automatic pressure compensation of the bottom roll cylinder, standard cooling system for ambient temperatures up to 35° C Dsdpfjxnnf Isx Aptskt • Automated axis optimization • Automatic shutdown of the hydraulics for the roll position • Ultra-compact design to reduce or even eliminate foundation costs • Safety emergency stop cord Optional equipment: • Two-roll drive for the top and bottom rolls • Taper bending device for bending conically shaped workpieces • Extended cooling system for ambient temperatures up to 45 °C • Upper support for easier bending of large diameters • Side support to assist in bending large diameters • Gas pressure accumulator for calibrating already welded cylinders • BendIT-Office workstation software • Autonomous bending • Machine prepared for quick change of top rolls • Interchangeable top rolls with different diameters for bending shots with small diameters • Hardened rolls if black and stainless material is to be bent • Infeed roller table for easy feeding of sheets into the machine • Centering device for the infeed roller table, for automatic centering of the sheets before bending Not the right machine? As a representative of Haeusler, we can put together and offer you your desired machine according to your needs. Further information on request.

Condition: new, functionality: fully functional, Year of construction: 2026, Electronically controlled, hydraulic four-roller bending machine Make FACCIN, model 4 HEL/S 2122 Technical specifications: Number of Reels: Four Geometry of the side rollers: linear guides Working width: 2000 mm Top roller diameter: 225 mm Lower roller diameter: 215 mm Side roller diameter: 165 mm Pressure force against the top roller: 100 tons Guaranteed installed power: 9.2 kW (12.5 hp) Guaranteed maximum turning speed: 4-8 m/min Guaranteed machine weight: 4,450 kg Length: 3,500mm Width: 1,200mm Height: 1,100mm Guaranteed capacities: for material with a yield point of 260 N/mm² Rolling capacity (full working width) 11 mm Bending capacity (full working width) 8 mm from a pipe diameter of 1,100 mm Dksdpfx Aod Eqg Heptot Rolling capacity (full working width) 8 mm Bending performance (full working width) 6 mm from pipe diameter 286 mm Standard equipment: Double linear guide system for roller movement Extremely wide bearing blocks MCS double bearing system for the roller rotation Extra heavy double hinged folding bearing Electronic parallelism system EPS Hardened rollers for high wear protection All rolls ground after heat treatment Siemens S7 PLC control Hitech hydraulic and electric package Safety trip wire with emergency stop and CE certification central lubrication cone bending device Optional equipment included: CNC control PGS-ABSOLUTE

Condition: new, functionality: fully functional, Year of construction: 2026, roller diameter: 200 mm, roller length: 2,000 mm, working width: 2,000 mm, sheet thickness steel (max.): 8 mm, type of input current: three-phase, working length: 2,000 mm, Hydraulically controlled four-rolls bending machine Make BIKO, model B4 2020 Technical specifications: Dksdpfsd Iclrjx Aptjt Number of Rolls: Four Geometry of the side rolls: linear guides Working width: 2000 mm Top roll diameter: 200 mm Lower roll diameter: 180 mm Side rolls diameter: 160 mm Guaranteed installed power: 5.4 kW Guaranteed maximum rotation speed: 5 m/min Guaranteed machine weight: 3,950 kg Length: 3,200mm Width: 1,000mm Height: 1,100mm Guaranteed capacities: for material with a yield point of 260 N/mm² Rolling capacity (full working width) 8 mm Bending performance (full working width) 6 mm from pipe diameter 1000 mm Rolling capacity (full working width) 5 mm Bending capacity (full working width) 4 mm from pipe diameter 265 mm Standard equipment: Linear guide system for roller movement Extremely wide bearing blocks Needle bearing for the roller rotation Extra heavy double hinged folding release Hardened rolls for high wear protection Hydraulic parallelism system of the side rollers Digital display for the position of the side rolls and the bottom roll cone bending device Control on the swiveling control panel Safety lanyard with emergency stop and CE certification

Condition: used, Working length: 5.500mm Sheet metal thickness: 13mm Technical characteristics: *3 ROLLS WORKING *TOP ROLL DIAMETER Φ-500 *SIDE ROLLS DIAMETER Φ-300 (EACH ONE) *HYDRAULIC HOLDERS LEFT-RIGHT Dodpfxj Dvlie Aptjkt *HYDRAULIC LIFTING TOWER *HYDRAULIC PREBENDING

Condition: new, neu ca. 12 - 14 Wochen ab Auf Türkei 62600 € 1183.14 € 2050 mm 13 mm 10 mm 13 mm 10 mm 10 mm 8 mm 240 mm 240 mm 190 mm 820 mm 11 kW 3830 mm 1160 mm 1200 mm 5000 kg 4 rolls fully hydraulic drive of upper and lower roll (from 30 mm bending capacity all four rolls) by planetary gear box hydr. side rolls positioning with electronical synchronisation hydr. lower roll feed with mechanical synchronisation adjustable pinching pressure variable rolling speed Dksdpfxsypbqbj Aptjt hardened rolls conical bending device hydraulic drop-end bearing moveable control panel overload protection user manual in GERMAN or ENGLISH according to CE rules OPTIONAL: NC control upper and lateral supports IMPORTANT ISSUES AT CONICAL BENDING: the max. sheet metal thickness isequivalent to 50 % of nominal capacity

Condition: new, functionality: fully functional, Year of construction: 2026, Hydraulically controlled three-roller bending machine Make BIKO, model B3 2021 Technical specifications: Number of Reels: Three Geometry of the side rollers: linear guides Working width: 2000 mm Top roller diameter: 215 mm Side roller diameter: 195 mm Guaranteed installed power: 7.2 kW Guaranteed maximum rotation speed: 5 m/min Guaranteed machine weight: 3,000 kg Length: 3,700 mm Width: 1,000mm Height: 1,100 mm Guaranteed capacities: for material with a yield point of 260 N/mm² Rolling capacity (full working width) 13 mm Bending capacity (full working width) 9 mm from pipe diameter 1075 mm Rolling capacity (full working width) 9 mm Bending performance (full working width) 7 mm from pipe diameter 280 mm Standard equipment: Double linear guide system for the roller movement Extremely wide bearing blocks MCS double bearing system for the roller rotation Extra heavy double hinged release Hardened rolls for high wear protection Hydraulic parallelism system of the side rolls Digital display for the position of the side rolls cone bending device Safety trip wire with emergency stop and CE certification Dodpfx Apscuxp Totjkt Mobile control panel

Condition: new, neu ca. 12 - 14 Wochen ab Auf Türkei 70300 € 1328.67 € 3100 mm 8 mm 8 mm 6 mm 6 mm 5 mm 240 mm 240 mm 190 mm 825 mm 11 kW 4880 mm 1160 mm 1200 mm 6450 kg 4 rolls fully hydraulic drive of upper and lower roll (from 30 mm bending capacity all four rolls) by planetary gear box hydr. side rolls positioning with electronical synchronisation hydr. lower roll feed with mechanical synchronisation adjustable pinching pressure variable rolling speed hardened rolls conical bending device hydraulic drop-end bearing moveable control panel overload protection user manual in GERMAN or ENGLISH according to CE rules OPTIONAL: NC control Dkodpfx Asypbqnjptet upper and lateral supports IMPORTANT ISSUES AT CONICAL BENDING: the max. sheet metal thickness isequivalent to 50 % of nominal capacity the cone length can be max. 30 % oremust be more than 60 % of roll length hardened rolls are recommended

Condition: new, neu ca. 12 - 14 Wochen ab Auf Türkei 83800 € 1583.82 € 2550 mm 15 mm 15 mm 13 mm 12 mm 12 mm 10 mm 270 mm 270 mm 230 mm 50 mm 1155 mm 15 kW 4760 mm 1660 mm 1155 mm 8950 kg 4 rolls fully hydraulic drive of upper and lower roll (from 30 mm bending capacity all four rolls) by planetary gear box hydr. side rolls positioning with electronical synchronisation hydr. lower roll feed with mechanical synchronisation adjustable pinching pressure variable rolling speed hardened rolls conical bending device hydraulic drop-end bearing moveable control panel overload protection user manual in GERMAN or ENGLISH according to CE rules OPTIONAL: NC control upper and lateral supports IMPORTANT ISSUES AT CONICAL BENDING: the max. sheet metal thickness isequivalent to 50 % of nominal capacity the cone length can be max. 30 % oremust be more than 60 % of roll length hardened rolls are recommended Djdeypbp Dopfx Aptskt

Condition: new, neu ca. 12 - 14 Wochen ab Auf Türkei 134000 € 2532.6 € 3100 mm 25 mm 25 mm 20 mm 20 mm 20 mm 16 mm 360 mm 360 mm 270 mm 60 mm 1510 mm 22 kW 5560 mm 2060 mm 2050 mm 16750 kg 4 rolls fully hydraulic drive of upper and lower roll (from 30 mm bending capacity all four rolls) by planetary gear box hydr. side rolls positioning with electronical synchronisation hydr. lower roll feed with mechanical synchronisation adjustable pinching pressure variable rolling speed hardened rolls conical bending device hydraulic drop-end bearing moveable control panel overload protection user manual in GERMAN or ENGLISH according to CE rules Dkjdsypbquepfx Aptet OPTIONAL: NC control upper and lateral supports IMPORTANT ISSUES AT CONICAL BENDING: the max. sheet metal thickness isequivalent to 50 % of nominal capacity

Condition: new, neu ca. 12 - 14 Wochen ab Auf Türkei 95000 € 1795.5 € 3100 mm 13 mm 12 mm 8 mm 13 mm 10 mm 10 mm 8 mm 270 mm 270 mm 230 mm 50 mm 1155 mm 15 kW 5310 mm 1660 mm 1590 mm 10050 kg 4 rolls fully hydraulic drive of upper and lower roll (from 30 mm bending capacity all four rolls) by planetary gear box hydr. side rolls positioning with electronical synchronisation hydr. lower roll feed with mechanical synchronisation adjustable pinching pressure Dkodpfx Apeypbqhetjt variable rolling speed hardened rolls conical bending device hydraulic drop-end bearing moveable control panel overload protection user manual in GERMAN or ENGLISH according to CE rules OPTIONAL: NC control upper and lateral supports IMPORTANT ISSUES AT CONICAL BENDING: the max. sheet metal thickness isequivalent to 50 % of nominal capacity

Condition: new, sheet thickness: 8bending length: 3100upper roll diameter: 230 Technical specifications: - Hardened and polished rolls - Complete body made of ST-52 Steel - Machine have 4 rolls and designed for symmetrical working principle - Hydraulic powered cover for easy material extracting - Digital readout for side rolls (2 digital readout) - Side rolls are free for rotation and upwards downwards movements are hydraulic powered - Top and bottom rolls are driven by hydraulic and gearbox. Bottom roll’s vertical movements are hydraulic powered - Separate control panel form machine - Conic bending device - In accordance for CE norms Options: - variable speed of rotation EURO 4.681,-- - metarial feeding table EURO 3.400,-- - oil coiler EURO 1.040,-- - center support EURO 8.250,-- - side supports EURO 7.070,-- - Automatic material extractor - PLC control - CNC control - Automatic material loading system - Changeable top roll - Adjustable bottom roll support system (for customer’s special requests) Dkjdjd Ab Saspfx Aptjt We have many references!

Condition: new, bending length: 2100sheet thickness: 8upper roll diameter: 200 Technical specifications: Dkedpfxod Ab Nho Aptjt - Back roll with motor - Cone bending device - Hardened and polished rolls - Body is made of St 52 steel - Asymmetrical design for perfect bending - Top and bottom rolls are driven by brake electric motor and planetary gearboxes in gear system - Portable control panel  - In acccordance with CE norms Options: - Lower roll powered by electric motor EURO 2.200,-- - Digital readout for displaying position of the backroll EURO 1.010,-- - Extended rolls for profile rolls EURO 966,-- - Profile rolls EURO 1.190,-- We have many references!