Condition: excellent (used), Calibration and fine sanding machine with 1 sanding unit 1 motor, processing from above Working width 1000 mm Sanding belt dimensions 2200 x 1030 mm Workpiece dimensions 3 - 170 mm Table height adjustment motor 0.18 kW, 400 V, 50 Hz Main motor 7.5 kW, 400 V, 50 Hz 2 feed speeds 5.5 & 11 m/min 1st unit: Combination unit, sanding drum, rubberized, 90 Sh / pneumatic sanding pad Sanding pad NEW 2nd unit: Cleaning brush Compressed air requirement approx. 6 bar Suction diameter 200 mm Dimensions approx. L x W x H = 1385 x 1980 x 1900 mm Weight approx. 1800 kg Automatic workpiece thickness adjustment with digital display Oscillation of the sanding belt Sanding belt emergency stop with disk brakes Table extension with 3 rollers in the outfeed Emergency stop button Main switch Cgolnjudxchs E Awxst TRANSPORT CARPET LIKE NEW - was replaced by us approx. 3 years ago MORE THAN 30 WIDE BELT SANDERS Note used machines: - Subject to errors in technical specifications and prior sale. - Prices quoted are ex location - free loading! - The machines have been cleaned and functionally tested. - All machines are purchased as seen without any warranty. The buyer is free to inspect the machines on site. - Special agreements are only possible in written form. (Inquiries will only be answered with your address and telephone number).

Condition: new, Year of construction: 2024, New machine Year of construction 2024 Equipment and technical data: - Complete sanding unit can be tilted by motor up to 45 degrees without any table adjustment - Feed system integrated in the machine carrier, conveyor belt 50 mm wide at the bottom, pressure rollers 60 mm diameter at the top, motor 0.55 kW Speed infinitely variable 3-15 m/min. - Double-sided operation with face and contact sanding side - Sanding belt size 200 x 2000 mm - Belt drive motor 3 kW Colovbmkmsn E Awxjgt - Oscillation stroke programmable 10-90 mm - CE-compliant/dust-tested Availability: short term Storage location: Hochheim

Condition: new, Year of construction: 2022, Bandwidth: 200mm Belt length: 3000mm Table size: 960mm x 352mm Additional table: 330mm x 330mm veneer sanding device: yes oscillation: yes sanding unit swiveling: yes suction connection: 120mm Cgslehy Iyvjn E Awxjt Motor power: 3 kW Machine length: 1900mm Machine width: 900mm Weight: 310kg

Condition: excellent (used), - Table length: 2200 mm - Table width: 110 mm - Motor power: 3 kW - Power supply: 400 V - Belt width: 150 mm Cgoln E Aov S Umwewxjt - Manual table height adjustment - Safety switch - Inverter – smooth belt speed adjustment - Year: 2007

Condition: excellent (used), Year of construction: 1997, MAKA long belt sander Cgslswdnwxen E Awxjt Very good condition - motorized lifting of the table top - table width 80cm - table length 250cm + clearance - 380V power supply - Italian production - two speeds of rotation right/left - possibility of presenting the machine Price 1890 euros Price 7990 PLN I invite everyone to contact me.

Condition: used, Year of construction: 1975, with new feed carpet, not installed second hand Make Löwer Type RSM 280 S Year of construction 1975 Machine no. 3528 Number of belt units 1 piece Engines 5.5 hp Sanding width approx. 140 / 150 mm Grinding height approx. 120 mm band oscillation tape blow-off Feed speed 6 / 11 / 16 m/min. Band length approx. 1600 mm Band width approx. 160 mm Extraction connection D 100 mm Space requirement approx. LxWxH mm 1400x1000x1600 Weight approx. 650 kg Csln E Aovwgczswxjgt Storage location 97447 Gerolzhofen Handover in the current condition as seen without guarantee and guarantee - free loaded -

Condition: excellent (used), Year of construction: 1995, Number of units: 2 # max. working width : 1100 mm min./max. working height : 3 / 160 mm Sanding belt dimensions 1120 x 1900 mm Feed speed 5 & 10 m/min Motor power transport carpet 1.0 kW, 400 V, 50 Hz Motor power sanding units 1 x 11 kW, 400 V, 50 Hz 1st belt : calibrating roller, rubber 90 Sh, roller diameter 150 mm 2nd belt : electronic sanding pad with individual links 45 mm segment width Workpiece cleaning brush at the outlet Pneumatic sanding belt oscillation Electro-motorized table height adjustment with digital display Suction diameter 2 x 150 & 1 x 120 mm CE Approx. dimensions: L x W x H = 2000 x 1600 x 1900 mm Weight approx. 1350 kg both sanding shoes NEW occupied Incl. second, rigid sanding pad insert for solid wood and frame sanding Incl. many sanding belts Note on used machines: - Subject to errors in technical specifications and prior sale. - Prices quoted are ex location - free loading! Cjln E Awevb Emasxogt - The machines have been cleaned and functionally tested. - All machines are purchased as seen without any warranty. The buyer is free to inspect the machines on site. - Special agreements are only possible in written form. (Inquiries will only be answered with your address and telephone number).

Condition: used, Used machine Cgsln Eeq Hh Ebo Awxet Condition: age-appropriate table size 2600 x 900 mm max. usable sanding length 2500 mm Belt length 7100 mm x 150 mm 1100 mm offset right motor 5,2 kW Shipping dimensions: 4300x1650x1800 mm weight: 620 kg Availability: short term Location: Flörsheim

Condition: used, Year of construction: 1983, incl. new feeder beltusedmanufactured by Löwertype RSM 280 SXbuilt in 1983Masch.-No. 5245number of aggregates 1 piecemotor 5,5 kWsanding width ca. 190 mmsanding height ca. 120 mm3 feed speeds 6 / 11 / 16 m/t length ca. 1600 mmbelt width ca. 200 mmheight indicator gauge analogcombined aggregates roll/padfixed sanding pad1-beltstrip blowing deviceexhaust connection D 100 mmrequired space ca. 1300 mm x 800 mm x 1700 mmweight ca. 550 kgtotal connected power ca. 6,5 kWlocated in 97447 Gerolzhofen, free on truck, unverpacktsale in current condition as seen,without revision,without guarantee and Gewährleistung Cgoln E Ajvwf Nyjwxjt

Condition: excellent (used), Wide belt sander for calibration and fine sanding Working width 1100 mm Min. / max. workpiece height 3 - 120 mm Feed motor power 0.8 kW Sanding belt speed 18 m/sec Cgelnstwzyfo E Awxot Sanding belt dimensions 1115 x 2620 mm Feed speed 4.5 / 9 m/ min Suction connection 3 x 160 mm Compressed air connection 6 bar 1st unit Sanding roller rubber-coated 90 Sh Motor power 11 kW 2nd unit Combi unit Rubber-coated sanding drum 60 Sh Sanding pad, rigid Motor power 11 kW 3. cleaning brush unit Automatic workpiece thickness adjustment at infeed with digital workpiece thickness display Table extension in the outfeed Dimensions approx. L x W x H = 2291 x 1784 x 2350 mm Weight approx. 3000 kg Note used machines: - Subject to errors in technical specifications and prior sale. - Prices quoted are ex location - free loading! - The machines have been cleaned and functionally tested. - All machines are purchased as seen without any warranty. The buyer is free to inspect the machines on site. - Special agreements are only possible in written form. (Inquiries will only be answered with your address and telephone number).

Condition: new, Year of construction: 2022, Exhibition machine Year of construction: 12/2022 Equipment and technical data: DESCRIPTION Sanding unit can be swiveled by hand crank The machine stand made of welded steel guarantees high torsional rigidity and vibration-free operation Oscillating sanding belt with separate gear motor for better sanding results Oscillation can be switched on as required Sanding pad with graphite coating for a longer service life of the sanding belt Height-adjustable sanding table to utilize the entire sanding belt width Additional table for sanding radii with integrated extraction openings Sanding sleeve device with attachable work table Cjlek D Nxpon E Awxjgt The spring-loaded belt tension automatically compensates for belt length differences Ideal for veneer sanding with adjustable stops Veneer overhang can be sanded off effortlessly TECHNICAL DATA Dimensions and weights Length (product) approx. 1700mm Width/depth (product) approx. 1000mm Height (product) approx. 1150mm Weight (net) approx. 300kg Drive power Oscillation motor power 0.11kW Suction connection Suction nozzle diameter 2 x 100mm Work table(s) Worktable length 950mm Worktable width 450mm Work table height adjustment 110mm Electrical data Supply voltage 400V Mains frequency 50Hz Sanding unit Sanding belt length 2640mm Sanding belt width 150mm Belt speed(s) 14m/s Oscillation stroke 15mm Sanding surface length 800mm Sanding surface width 150mm Swivel sanding unit 0 45° SCOPE OF DELIVERY 1x sanding belt K100 5x rubber rollers Ø25, Ø30, Ø40, Ø45, Ø50 mm 6x sanding sleeves K80 - Ø25, Ø30, Ø35, Ø40, Ø45, Ø50 mm On-board tool Mitre fence Location: Hochheim Availability: Immediately

Condition: excellent (used), Heavy-duty double-sided edge sanding machine, oscillating Motor power approx. 3.0 kW Oscillation with own motor approx. 0.2 kW Sanding belt dimensions 3000 mm x 200 mm Front sanding table 980 x 340 mm rear sanding table 750 x 300 Space requirement L x W x H approx. = 1800 x 1500 x 1000 mm Weight approx. 600 kg Front sanding table with veneer edge sanding device Rear sanding table with infinitely variable angle adjustment Angle stop on rear work table Oscillation by means of gear motor Cgelnsuxqzuo E Awxjt Pneumatically height-adjustable sanding beam Interchangeable radius sanding discs Pneumatic belt tension, adjustable Extraction with blower Attachment option for feed unit 2 lateral support tables for radius sanding Note on used machines: - Subject to errors in technical specifications and prior sale. - Prices quoted are ex location - free loading! - The machines have been cleaned and functionally tested. - All machines are purchased as seen without any warranty. The buyer is free to inspect the machines on site. - Special agreements are only possible in written form. (Inquiries will only be answered with your address and telephone number).

Condition: new, Year of construction: 2022, New machine Year of manufacture 2022 Scope of delivery: Table widening Rubber rollers Cgjlskwhk Ssn E Awxst with veneer edge grinding device with contact shoe with fine ice setting and stop rulers with grooved infeed ruler for veneer overhangs quick changeover from veneer edge sanding to solid wood sanding possible length (product) approx.: 1900 mm width/depth (product) approx.: 900 mm Height (product) approx.: 1350 mm Weight (net) approx.: 290 kg Power oscillation motor: 0.25 kW Suction nozzle diameter: 140 / 100 mm Height adjustment longitudinal table: 230 mm cross table height min.: 720 mm working table length: 960 mm working table width: 350 mm Working table height adjustment: 230 mm 400: Supply voltage V Phase(s): 3 Ph type of current: AC Mains frequency: 50 Hz grinding belt length: 3000 mm grinding belt width: 200 mm belt rotation speed(s): 20 m/s oscillation stroke: 20 mm grinding surface length: 1050 mm grinding surface width: 200 mm incl. 1 VE abrasive belts K 80 1 VE abrasive belts K 120 Availability: short term Storage location: Hochheim

Condition: used, Year of construction: 1979, Used machine Coln Eokwhb Uo Awxsgt Year of construction: 1979 Condition: according to age - Space requirement: 4200 x 2600 mm - Belt dimensions: 7800 x 150 mm - Table size: 2900 x 1400 mm - working length: 2800 mm - Passage under belt: 340 mm - Offset right: 1100 mm - Drive motor: 7.5 kw - Weight: 1100 kg Availability: short term Location: Röllbach

Condition: used, Year of construction: 1991, Used machine Used profile sanding machine of the company Arminius type ST 10 Year of construction: 1991 MNo.: 0-290-02-1567 Engine power: 1.1 kW Spindle adjustment: 0° - 135° Celnokwhh Te E Awxsgt Table surface: 1000 x 800 mm without visible objects on the table surface Availability: short term Location: Röllbach

Condition: used, Used machine Cslnekwhfxj E Awxegt Used long belt sander from Markant table size approx. 2400 x 800 mm Availability: short term Location: Hochheim Hochheim

Condition: used, Year of construction: 1990, Used machine Year of construction 1990 Sanding width 1350 mm Sanding thickness max. 150 mm Colneulp Dys E Awxegt 2 belt machine 1st unit grooved steel calibrating roller 2nd unit KOMBIAGGREGAT - with rubber sanding drum 65 SH (newly rubberized) - Pneumatic sanding shoe Belt cleaning device (rear only) Insert control for sanding pad (synchronized with feed speed) Brush roller for cleaning Infinitely variable feed speed 4-20 m/min (Vario gearbox) Automatic table positioning (workpiece thickness) Digital display for workpiece thickness Motorized height adjustment of work table Machine is completely overhauled Pictures show machine in not yet overhauled condition Availability: by arrangement Storage location: Hochheim

Condition: used, Year of construction: 1991, Used machine Year of construction: 1991 Machine completely serviced and checked Working width: 1100 mm Working height: 140 mm Height adjustment: electric Workpiece thickness display: digital Aggregates: 2 1st unit: Combination unit (roller - shoe) with electronic link sanding shoe 2nd unit: Shoe unit, electronic segment shoe with vacuum transport carpet Dedusting brush: yes Cjln Esrtt H Tj Awxsgt Motor power: 2 x 15kW Power consumption: 65A Suction connection: 4 x 200mm Sanding belts 1120 x 1900 Weight: 3500kg Availability: short term Storage location: Hochheim

Condition: used, Year of construction: 2000, Used machine Equipment and technical data: DESCRIPTION Sanding unit can be swiveled by hand crank The machine stand made of welded steel guarantees high torsional rigidity and vibration-free operation Oscillating sanding belt with separate gear motor for better sanding results Oscillation can be switched on as required Sanding pad with graphite coating for a longer service life of the sanding belt Height-adjustable sanding table to utilize the entire sanding belt width Additional table for sanding radii with integrated extraction openings The spring-loaded belt tension automatically compensates for belt length differences Ideal for veneer sanding with adjustable stops Veneer overhang can be sanded off effortlessly TECHNICAL DATA Dimensions and weights Length (product) approx. 1700mm Width/depth (product) approx. 1000mm Height (product) approx. 1150mm Weight (net) approx. 300kg Drive power Power oscillation motor 0,11kW Work table(s) Worktable length 950mm Work table width 450mm Work table height adjustment 110mm Electrical data Supply voltage 400V Mains frequency 50Hz Sanding unit Sanding belt length 2640mm Sanding belt width 150mm Belt speed(s) 14m/s Oscillation stroke 15mm Sanding surface length 800mm Sanding surface width 150mm Swivel sanding unit 0 45° with chassis Availability: short term Cgelnev E S Acs E Awxot Storage location: Flörsheim

Condition: used, Year of construction: 1983, Used machine Year of manufacture: 1983 completely checked + serviced including new feed belt Equipment and technical data: Cgolnst H Tule E Awxet Incl. combination unit with contact roller and sanding shoe with height-adjustable contact roller for calibration with air cushion pressure shoe controlled by the workpiece 4-way adjustable grain compensation with pneumatic belt tensioning device with a rotating cleaning brush on the outlet side of the machine Grinding width: 1350 mm Grinding belt length: 1900 mm Passage height: 150 mm Main motor: 15 kW Feed speed continuously adjustable 2.5 - 12.5 m/min. with roller table at the inlet with digital display device for the electrically driven workpiece thickness adjustment Extraction nozzle 2 x 200 mm Space requirement approx. 2300 x 2000 x 2300 mm Weight approx.: 2300 kg Pictures show the machine in a condition that has not yet been overhauled! Location: Flörsheim Availability: approx. 6-8 weeks after placing the order

Condition: new, Year of construction: 2024, New machine Year of construction: 2024 Equipment and technical data: Cgeln Eet Na Anj Awxot The Master gets to the heart of sanding. It contains the essence of our 75 years of experience in the field of sanding technology. This means that it combines all the features that are essential for the fast, reliable production of perfect surfaces right out of the box. No more, no less. The Kündig Master core model is equipped with a calibrating roller and a sanding pad unit and has a proven design that guarantees decades of high sanding precision across a generous working width of 1350 mm. A control unit is also on board, which guides you quickly and easily to your goal. The sanding units Proven combination The sanding units are based on the proven combination of calibrating roller and sanding pad. For safe workpiece guidance, there is a parallel spring-mounted steel pressure roller at the machine infeed and rubber pressure rollers between the sanding units. Calibration unit (R): The calibration unit is a grooved rubber contact roller of proven hardness. It is ideally suited for calibration tasks, if necessary also with high chip removal. The level of the contact roller is infinitely adjustable to compensate for the thickness of the inserted abrasive grain. Segmented sanding pad (E): With the E-Plus version, the fine sanding unit has a segmented, electronically controlled sanding pad with a scanning width of 35 mm instead of the pneumatic version. This allows even more precise fine sanding in the edge area of the workpieces. The edge pressure of the sanding segments is automatically controlled, but can also be precisely adjusted on the touch screen to influence the sanding around the edges of the workpiece even more precisely. Changing the graphite backing is also quick and easy here. The features - in a nutshell Construction: In terms of robustness and durability, the Master is in no way inferior to our other model series. It has the same solid construction that makes all our machines an investment with foresight and should continue to deliver precise sanding results for many years to come. Top section adjustment: We have been equipping our machines exclusively with top section adjustment for a good three decades. Why? Compared to table adjustment, it is more complex to construct, but it is also better in many respects. The machine can be loaded with heavier workpiece weights, it retains its precision more reliably and you have the advantages of a constant working height. Workpiece dimensions: The adjustment of the upper part, i.e. the passage opening, is motorized and can be finely adjusted via touch screen. The maximum clearance height is 160 mm. With a working width of 1350 mm, the Kündig Master has a generous, tried and tested standard dimension. Eco* energy-saving mode: The Kündig Master features our specially developed Eco* energy-saving mode. The software regulates the power consumption depending on the load. During work breaks, the machine automatically switches to standby mode. It is then immediately ready for use again. This achieves significant savings without compromising performance. Operation - quick and easy On the clearly laid out touch sc

Condition: used, Year of construction: 2001, Used machine Year of manufacture 2001 Grinding width 1100 mm Grinding belt length 1900 mm Workpiece thickness 3-150 mm Infinitely variable feed speeds 2.5-13 m/min. 1 steel contact roller 1 rubber-coated contact roller 1 sanding pad unit with air cushion sanding pad Drives: 1st sanding unit 15 kW 2nd sanding unit 15 kW 3rd sanding unit 11 kW with table extension at the inlet with table extension at the outlet Colnjwb Egxo E Awxogt Total connected load 43 kW Weight 3100 kg Extraction capacity approx. 6750 m³/h Air speed 20 m/s Compressed air connection 6-8 bar Air consumption approx. 30 l/min. L x W x H 1750 x 2740 x 1890 mm

Condition: new, Year of construction: 2023, New machine Year of manufacture: 2023 Equipment and technical data: In intermediate lacquer finish (Cd-L) version. Robust, space-saving 1-wide belt sanding machine for demanding pre- and finish sanding Constant working height thanks to upper part adjustment Working width 1350 mm Top sanding with combi unit entire sanding unit can be inclined up to 10 grooved rubber contact roller in proven hardness contact roller level steplessly adjustable in height according to a sanding grit scale pneumatic lifting/lowering of the contact roller according to unit selection sanding pad with quickly replaceable sliding lining parallel spring-loaded, ground steel pressure roller at the infeed rubberized pressure roller at the outlet belt drive motor 11 KW (1100mm) 15 KW (1350mm),18,5 kW (1600mm) 400 V./50 Hz; with soft start for low power consumption at start-up Motorized, fine adjustable height adjustment with digital display Belt tension, control and oscillation pneumatic, compressed air consumption approx. 2 l/min. Optimum safety thanks to automatic immediate stop with disc brake in case of belt breakage, belt breakage, belt run-out, pressure drop or opening of the belt entry door. Workpiece feed 1.1 or 1.5 kW with fabric-reinforced rubber transport carpet Vacuum device for work table with small parts area, fan integrated in the machine stand Complete electrical system with contactor control; automatic star-delta start-up of the motor, motor protection and ammeter for chip removal monitoring passage height 200 mm grinding belt size 1350x 2000 mm Automatic thickness adjustment over the whole working width Workpiece overthickness safety device with immediate feed stop and automatic lift-off of the machine upper part Stepless regulation of chip removal Electronic feed control on the control panel, infinitely variable 3 - 15 m/min. PLC control/programming with touch screen (Color) and TEACH-IN storage (at the push of a button according to the grinding result, i.e. no typing required) Pneumatic carpet run control Workpiece support tables at infeed and outfeed ENORMATIC: Fully automated quick setting and feed triggering (very useful e.g. for large workpieces) eco* energy saving mode Error diagnosis Job and operating hours counter - Electronic segment sanding pad, Segment width 22 mm (swiveling special design) - infinitely variable sanding belt speed (with program storage) - jet nozzles for sanding belt cleaning, insert-controlled, additional exhaust nozzle - additional sanding shoe insert for lacquer sanding incl. air sword compl. swiveling incl. freight, unloading on site Incl. commissioning and instruction Location: Solingen Cslskwhxisn E Awxogt Availability: short term

Condition: new, Year of construction: 2024, New machine Year of construction: 2023 Equipment and technical data: Robust, space-saving 2-belt sanding machine for demanding pre- and finish sanding Constant working height thanks to top section adjustment Working width 1350 mm Top sanding, with 2 sanding units 1st unit with grooved rubber contact roller of proven hardness Pneumatic (program-controlled) adjustable contact roller, contact roller level infinitely height-adjustable according to a sanding grain scale 2nd unit with electronically controlled, segmented sanding pad, segment width 35 mm and with quickly replaceable glide coating Parallel spring-loaded, ground steel pressure roller at the infeed Rubberized pressure rollers between the sanding units and at the outlet Motor 15 kW (20 HP), 400 V./50 Hz with soft start for low power consumption at the start Motorized, finely adjustable height adjustment with numerical display Cgeln Esuhiq De Awxst Pneumatic belt tensioning, control and oscillation, compressed air consumption approx. 4 l/min. -Optimum safety thanks to automatic immediate stop with disk brake in the event of belt breakage Workpiece feed 0.75 kW (1.0 hp) with fabric-reinforced rubber transport carpet Complete electrical system with contactor control; automatic star-delta start of the main motor, motor protection and ammeter for monitoring chip removal Passage height 200 mm Sanding belt dimensions 1350 x 2000 mm Comfort equipment: Automatic thickness adjustment across the entire working width Workpiece over-thickness protection with immediate feed stop and automatic lift-off of the upper part of the machine Stepless regulation of chip removal Electronic feed control on the control panel, infinitely variable 3 - 15 m/min. PLC control/programming with touch screen (color) and TEACH-IN storage (at the touch of a button according to the sanding result, i.e. no typing required) Pneumatic carpet run control Workpiece support with roller at infeed and outfeed -Enormatic: Fully automated quick adjustment and feed solution eco* energy-saving mode Fault diagnosis Order and operating hours counter Machine in E-Plus version (RE) Incl. outfeed table extension 1350 ch, foldable, without insert plate Incl. freight, unloading on site Incl. commissioning and instruction Location: Hochheim Availability: Approx. week 51 /2023

Condition: used, Year of construction: 1990, Used machine Year of manufacture: 1990 Equipment and technical specifications: Cjln Eewb Ei Hs Awxegt Max. working width: 1100 mm Min. / max. workpiece thickness: 3 / 160 mm Sanding belt dimensions: 2150 x 1120 mm Sanding belt speed: 18 m/sec Feed speed: 4 + 8 m/min Sanding unit motor power: 15 kW Feed conveyor motor power: 1.1 / 1.8 kW Operating pressure: 6 bar Air consumption: 20 l/min Extraction nozzles: 2 x 150 + 1 x 120 mm Dimensions: 2690 x 1800 x 2100 mm Weight: approx. 3500 kg Storage location: Hochheim Availability: upon request