Year of construction: 1987, condition: good (used), machine/vehicle number: 17/4, usable grinding wheel outer Ø: 600 mm Table size: 470 x 950 mm Table can be tilted down/up to: 45/30° Table height above floor: 950 mm Grinding wheel speed: 940 rpm Cjdsit N Ipspfx Ab Sjhc Grinding wheel drive: 380 V, 940/1140 rpm, 2.2/2.5 kW Weight: 237 kg

Condition: used, SCM Sandya RT 1100 Roller + Pad Calibrator, belt width 1100 mm. Machine working and tested. Rug in excellent condition. Chsdpjxcu Sksfx Ab Soc

Condition: excellent (used), Edge sander Volpato LBK 160S Sanding height: 150 mm Mechanical oscillation Two belt speeds Additional unit for profile sanding Chodpow Ng A Aofx Ab Soc 6-roller feed (machine can also be sold without it) Total power: 4.5 kW

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, We offer for sale a wide-belt sander SANDYA 16-S RRCS 1350 The machine is fully operational and has seen little use. It was utilized as an auxiliary machine for non-standard projects. STANDARD EQUIPMENT * Control panel * Electric adjustment of working height * Digital display of working thickness * Feed belt made of natural rubber * Automatic centering and tensioning of the feed belt * Movable rubber pressure rollers before and after the working units * Flexible steel pressure bar in front of the first working unit * 2 roller supports with 2 non-driven rollers at the machine's infeed and outfeed * Electronic oscillation of the sanding belt * Extraction sockets designed to reduce air consumption * "Hand guard" – emergency device at the material infeed * Safety switches at the front and rear of the machine * Lockable main switch * Automatic “star-delta” switch for the main motor * Overload protection for the main motor * Automatic brake for instant shutdown of the working units * Automatic emergency stop in case of: - sanding belt breakage - lack of tension in the sanding belt - lateral displacement of the sanding belt - lack of compressed air - main motor overload * Electric motors with IP 54 insulation class TECHNICAL DATA - Working width: 1,350 mm - Min./max. working thickness: 3–170 mm - Sanding belt width: 1,375 mm - Sanding belt length: 2,620 mm Machine configuration: Chodswq Efmopfx Ab Sec -B/23 * Reading bar for sectional pads, 23 sectors FIRST UNIT "R" - Calibrating steel roller, diameter 200 mm, 18/5 kW - Pneumatically activated On/Off selector for the first roller, actuated by pneumatic cylinder, including micrometric position adjustment according to sanding belt thickness - Oscillating blower for cleaning the sanding belt of the first unit Complete with: • Electronic positioning • Timed activation linked to the presence of the workpiece • Extraction port • Filter and pressure regulator SECOND UNIT "R" - 250 mm diameter, 55SH rubber sanding roller, 15 kW - Pneumatically activated On/Off selector for the second roller, actuated by pneumatic cylinder, including micrometric position adjustment according to sanding belt thickness - Reverse motion for the second unit THIRD UNIT "CS" - 175 mm diameter sanding roller - Electronic segmented pad on the third unit Includes LOGIC TS electronic programmer • Distance between segments: 60 mm • Working pressure adjustment - Pneumatically activated On/Off selector for the third roller Roller supports at infeed and outfeed for long elements Fixed cleaning unit at the outfeed Electronic positioning of the worktable The machine was purchased new from an authorized SCM Poland dealer and has always been serviced by authorized SCM service. The last calibration was performed on 16.01.2025 Machine available from mid-July Number of operating hours: 589h

Condition: used, machine/vehicle number: V17.003, Technical data: - Manufacturer: VOLPATO Italy - Type: LS 1N1RF1A - Year of manufacture: 2017 - Variable feed speed from 0 to 25 m/min - Dimensions: 4400x1400x1900 mm - Net weight: 1100 kg 1st unit: Belt grinding unit - Two-speed motor - Belt speed: 7-14 m/s - Pneumatic tensioning of the grinding belt. - Time-controlled lowering and lifting of the grinding shoe. - Air blower system for cleaning and cooling of the sanding belt, connected to that of the sanding pad - Rotation of the sanding belt: 135° - Diameter of the extraction nozzle: 100 mm - Dimensions of the sanding belt: 80 x 2450 mm. - Compressed air consumption (for each sanding belt unit): - Operating consumption: 2.5 m³/hour at 5 atm - Blower consumption: 28 m³/hour at 5 atm - Exhaust air volume: 900 m³/hour Chsdpfxjwpwu Rs Ab Ssc - Exhaust air speed 30 m/s 2. Unit: Double milling unit - The unit consists of two motors, each with 1.1 kW, the first is converted from 0° to -45°, the second from 0° to +45°, each with copying rollers in the X and Y axes, the second is connected to the machine. - Motor shaft diameter = 20 mm. - Outer diameter of the tool = 70 mm. - Number of teeth on the tool = 4 - Tool speed = 12,000 rpm - 2 extraction nozzles 80 mm. - With pneumatic tool removal. 3rd unit: Grinding wheel unit - Single-stage motor 1.5 kW - Unit rotation: 180° - Max. disc diameter: Ø220 mm. - Maximum disc width: 90 mm. - Disc shaft diameter: Ø 30 mm. - Diameter of dust extraction nozzle: 100 mm. - Exhaust air volume: 900 m³/h - Exhaust air speed: 30 m/s - Compressed air consumption (for each grinding wheel unit): - Operating consumption: 2.3 m³/h - Blower consumption: 20 m³/h

Condition: good (used), functionality: fully functional, Wide Belt Sander CB 1300 R+RR Chodow U D Duopfx Ab Soc Specification: • Condition – used, after comprehensive inspection and calibration • Manufacturer – CB • Model – 2NRKRR13002N • Working width – 1300 mm • 2 sanding units: - First: calibration roller, made of hard rubber – diameter 230 mm - Second unit: 2 rollers, hard and soft, each with independent adjustment, diameter 160 mm each • Main motors: 2 x 9.2 kW • Two conveyor feed speeds • Electronic indicator for workpiece thickness • Photoelectric sensor-controlled oscillation • Infeed/outfeed extension rollers • Electric up/down adjustment • Thickness gauge for sanded material • Safety sensor to prevent oversized material entry • Original paintwork • Sanding belt size – 1340 x 2200 mm • Extraction ports – 3 x 180 mm • Weight approx. 2200 kg • Machine from the early 1990s • Dimensions: 200 x 220 x 210 cm (L x W x H) Additional Information: • Excellent original technical and visual condition • Photos shown reflect the actual condition of the item for sale • On-site power-up and inspection possible

Condition: used, Year of construction: 2002, SECOND-HAND DOUBLE DISK SANDER LANDONIO MOD. LV 800 - CE RULES Chjdpfx Abowrm R Ho Ssc - Year 2002

Condition: new, Year of construction: 2025, New machine Year of manufacture: 2025 Codpfx Aow Tfwtjb Sjhc Features and technical data: MODEL Excel 2NRKRT 2-BELT MACHINE 1ST BELT ROLLER 2ND BELT COMBI-UNIT ROLLER/PLATEN FOR SOLID WOOD, VENEER, AND INTERMEDIATE LACQUER SANDING - Usable WORKING WIDTH mm 1350 - SANDING BELT LENGTH mm 1370 X 2150 - MAX. WORKPIECE THICKNESS mm 160 - STEEL CALIBRATION ROLLER mm 180 - Rubber-coated SANDING ROLLER mm 180 - SANDING SHOE WIDTH mm 50 - BELT MOTOR POWER kW 14.7 - BELT SPEED m/s 18/16 - FEED MOTOR POWER HP 0.75 - Variable-speed feed carpet with stepless adjustable speed m/min 4/20 - HEIGHT ADJUSTMENT MOTOR HP 0.33 - Mechanical BELT OSCILLATION "ECO GEAR PATENT SYSTEM" - 1 pc. DRUM BRAKE for belt slowdown - Pivoting ROLLER for belt tensioning - 3 pcs. PRESSURE ROLLERS; with rubber coating - EMERGENCY STOP BAR at infeed

Condition: like new (used), Year of construction: 2017, machine/vehicle number: 0-256-23-1012, Operating hours recorded: 361.69 h Working width: 1350 mm Wide belt width: 1350-1380 mm Wide belt width: H/X 1370 mm Cross belt width: 150 mm Belt change side: left Working height: 900 mm Workpiece thickness: 3-160 mm Feed speed: 2.5-13 m/min Workpiece detection: High-precision workpiece detection with a 12.5 mm pitch; multiple loading of complex parts Units: 1. Cross unit (1350 mm) (T3/5), Chjdpfx Absv T Nnfe Soc Continuously variable, frequency-controlled cutting speed 2-16 m/s, MPS 2.0 Plus (1350 mm) electromagnet. Articulated pressure bar Drive motor 13.5 kW 2. X-shaped unit (1350 mm) (T3/5) with internal lamella belt and steel contact roller for mounting an articulated pressure bar with three options: - Calibration sanding with profiled contact roller - Veneer and lacquer sanding without lamella belt - Veneer and lacquer sanding with lamella belt Continuously variable, frequency-controlled cutting speed 2-18 m/s MPS 2.0 Plus (1350 mm) Electromagnetic articulated pressure bar Drive motor 18.5 kW 3. U-shaped unit (1350 mm) (T3/S/7/9) Universal unit for mounting round brushes on interchangeable frames and disc brush cassettes. Terminal controlled adjustment of the brush feed and thus the immersion depth, continuously frequency controlled brush oscillation 36-240 strokes/min. Switchable Rotation direction in either forward or reverse rotation Drive motor 15 kW Cutting speed 130 - 1000 2 carriages for easier changing of brush units on interchangeable frames (service carriage for U-unit) 1 structuring brush, diameter 300 mm 1 satin brush, diameter 300 mm 4th brush unit with structuring brush Drive motor 5.5 kW Brush material: Anderlon K 80 Diameter 150 mm Cleaning system with integrated ionization device with 16 rotating nozzles and suction nozzle Sanding belt dimensions 1370 x 2150 mm Vacuum clamping device 5.5 kW, vacuum blower integrated into the machine Machine control terminal touch screen Additional 2 roller conveyors, each L = 3000 mm, W = 1300 mm Various Sanding belts P24-P100 (approx. 50); extraction piping; mobile sanding belt holder (6 arms) Operating voltage: 400 V, 50 Hz Space requirement: L x W x H: 2566 mm x 2100 mm x 2415 mm Weight: 5500 kg Machine dimensions: 2600 x 2030 x 2000 mm Location: 32683 Barntrup

Condition: ready for operation (used), Working width: 900mm Steel calibrating roller Combination unit with a rubber roller Codpfxjw Dqy Ns Ab Sjhc Motor power: 11kW Pneumatic shoe adjustment Pneumatic oscillation with a photocell Element thickness gauge Electric table adjustment Star/Delta start-up Power supply: 380V

Condition: used, Year of construction: 1986, machine/vehicle number: 8240, Bandanzahl : 1 max. Arbeitsbreite : 1100 mm max. Arbeitshöhe : 150 mm 1. Band : Kombiaggregat Ausführung 1. Walze : Stahlkontaktwalze Chsdpfswaukdsx Ab Sjc Schleifschuh 1. Aggregat : starr, höhenverstellbar Schleifbandlänge 1. Aggregat : 2500 mm Schleifbandbreite 1. Aggregat : 1150 mm Antrieb Aggregat 1 : 15 kW Steuerung : Handbedienpult Elek./pneu. Bandoszilation : Ja Einlasshöhe : variabel (unterer Tisch verfährt) Tischhub : elektro-motorisch Tischanzeige : digital Betriebsdruck : 7 bar Arbeitshöhe bzw. Aufgabetischhöhe : 850 mm Beschreibung : neuer Teppich Gewicht ca. : 1700 kg

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, grinding width: 1,320 mm, grinding height: 160 mm, Wide Belt Sander SAC Project RT 1320 Specification: • Condition – used, fully serviced and calibrated • Manufacturer – SAC • Model – Project RT 1320 • Working width – 1320 mm • Maximum working height – 160 mm • Two sanding units: - First unit: calibrating roller made of hard rubber, diameter 300 mm (brand new, recently resurfaced) - Second unit: platen with sectional shoe and jump-in/out function • Dust extraction brush at the outfeed • Main motors: 10 and 11 kW • Total machine power at full load – 28 kW • Machine operated via touchscreen panel with memory for various programs and settings as required Codpfew U Dxfex Ab Sohc • Capability to operate in manual mode (user-defined parameters) or automatic mode (pre-saved programs with settings and parameters) • Stepless adjustment of the second unit’s rotational speed • Stepless feed speed adjustment • Electronic thickness gauge for the workpiece • Vacuum pump included • Belt cleaning/blow-off mechanism • Oscillation controlled by photoelectric sensors • Conveyor in very good condition • Extension roller tables included • Material thickness measuring gauge • Sensor to prevent feeding elements that are too thick • Original paintwork • Abrasive belt size – 2620 x 1320 mm • Extraction ports – 3 x 175 mm + 120 mm from brush • Weight – 2300 kg • Year of manufacture – 2001 • Overall dimensions – 255 x 205 x 230 cm (L x W x H) Additional information: • Excellent original technical and visual condition • Provided photos show the actual condition of the item for sale • Possibility to connect and test the machine on site

Condition: good (used), - Used machine - Passage width: 1350 mm - Rubber sanding roller - Rubber sanding roller - Sanding pad with cushion - Vacuum carpet - Rated current: 131 A Chjdpfxewhvfxe Ab Ssc - Rated power: 62.7 kW - Voltage: 400 V

Year of construction: 1991, condition: used, Used machine Year of manufacture: 1991 With 4 sanding units Workpiece dimensions: Thickness min. 10 mm max. 150 mm Width min. 10 mm max. 180 mm Length min. 190 mm, max. unlimited Cjdpfxew Tfxdj Ab Sjhc Abrasive belt dimensions: 200 x 1800 mm Extraction ports 2 extraction ports 80 mm 4 extraction ports 120 mm Required air velocity: 30 m/sec L x W x H: 3400 x 1150 x 1805 mm Weight: 2400 kg Availability: short term Location: Odenwald

Condition: excellent (used), Vertongen M-300 Combi Through-Feed Sander Working width: 300mm Cedpfx Ajw H Anweb Sohc Working height: up to 200mm Combi unit with sanding shoe Pneumatic oscillation Electronic height readout Manual lifting and lowering of the worktable Two feed speeds Main motor power: 5.5kW Abrasive paper size: 300x1900mm Weight: approx. 600kg

Condition: as good as new (ex-display), This type of semi-automatic machine allows the application of a removable self-adhesive protective film on delicate surfaces and is therefore particularly suitable for painting and panel packaging processes. The film is applied to the panel without debonding, the application of the film can be adjusted more or less long. The machine is suitable for panel masking, to avoid overspry in painting, thus avoiding long and costly manual protection. Suitable for medium production or small batches. Csdpfx Aeru A Raob Sjhc Useful working width 1300 mm.

Condition: good (used), Year of construction: 1990, functionality: fully functional, machine/vehicle number: 220, Dear customers, We are currently offering a very good used vertical band sander for model and mould making from the brand F. Zimmermann. Below are the technical details: Sanding belt width: 250 mm Sanding height: 400 mm Belt length: 2,400 mm Sanding speed: 18 m/s Work table: 750 x 350 mm Cedpfxow R R Ifj Ab Sshc Table tilt: 30/45° Power: 4.0 kW Speed: 1,400 rpm Extraction port diameter: 120 mm Dimensions: 990 x 850 x 1,740 mm Weight: 470 kg Equipment: - Foot emergency stop Price plus VAT; this will be itemised separately on the invoice.

Condition: like new (used), Year of construction: 2022, functionality: fully functional, HOMAG Sandteq w-300 Cjdpfxoxczmzs Ab Sshc Technical Data: - Feed belt speed: 2.5 - 13 m/min - Working height: 900 mm - Working width: 1350 mm - Number of processing units: 2 - Workpiece thickness: 3 - 160 mm with automatic measurement - Machine dimensions (LxWxH): approx. 2115 x 2100 x 2415 mm - Machine weight: approx. 4000 kg - Total electrical power: approx. 39 kW - Recommended main fuse: 80 A - Vacuum table - Q = Cross sanding unit Poly V-belt / 13.5 kW (2-16 m/s) - X = Combination unit with contact roller & pressure beam system / 18.5 kW (2-18 m/s) - Super-finish function: calibration, veneer & intermediate lacquer sanding, veneer & fine lacquer sanding - Brushing unit - Cleaning rotator with ionization - Powercontrol with Powertouch The machine is available immediately. Loading onto truck possible.

Condition: used, Year of construction: 2008, functionality: fully functional, machine/vehicle number: 0411491768, total width: 2,000 mm, total height: 2,040 mm, total length: 1,335 mm, working width: 1,350 mm, grinding width: 1,350 mm, power: 15 kW (20.39 HP), grinding belt length: 1,900 mm, workpiece height (max.): 150 mm, workpiece width (max.): 1,350 mm, Number of units: 1 piece (combo - roller/shoe) Cjdpfx Abexch Ape Sohc Working width: 1350 mm Abrasive belt width, length: 1370 x 1900 mm Constant working height: 900 mm Workpiece thickness: 3 - 150 mm Drive motor: 15 kW Belt speed: 2 - 18 m/s Feed speed: 2.5 - 13 m/min Connected load total: 19 kW Top section adjustment Belt air blast Rear table extension, foldable

Condition: used, Year of construction: 2000, Used machine Year of manufacture: 2000 Features and technical data: DESCRIPTION Grinding unit can be swiveled by handwheel The machine frame made of welded steel ensures high torsional rigidity and vibration-free operation Oscillating sanding belt with separate geared motor for improved sanding results Oscillation can be switched on as required Sanding shoe with graphite coating for longer belt life Height-adjustable sanding table allows use of the full belt width Auxiliary table for sanding radii with integrated extraction openings Spring-loaded belt tension automatically compensates for belt length variations With adjustable stops, ideally suited for veneer sanding Veneer overhang can be sanded off effortlessly TECHNICAL DATA Dimensions and weights Length (product) approx. 1700mm Width/Depth (product) approx. 1000mm Height (product) approx. 1150mm Weight (net) approx. 300kg Drive power Oscillation motor power 0.11kW Work table(s) Table length 950mm Table width 450mm Table height adjustment 110mm Electrical data Connection voltage 400V Network frequency 50Hz Grinding unit Abrasive belt length 2640mm Abrasive belt width 150mm Belt speed(s) 14m/s Oscillation stroke 15mm Sanding surface length 800mm Sanding surface width 150mm Swivel range of sanding unit 0 – 45° with undercarriage Chjdpfswkbcbsx Ab Sjc Availability: short-term Location: Flörsheim

Condition: ready for operation (used), Year of construction: 1996, functionality: fully functional, Andi Stratos CNC machine Working area 2520 x 1285 ISO30 spindle Tool changer Cedpjxc T Ahsfx Ab Sshc 250m3 Becker vacuum pump Fencing left and right Laser safety at the front Fanuc control Machine fully operational Available November 2025

Condition: ready for operation (used), Year of construction: 2001, Bütfering Classic 211 CE wide belt sander Working width 1100 mm Sanding belt width 1120 mm Sanding belt length 1900 mm constant table top head infeed 1st unit type C combined contact roller sanding pad unit with -profiled steel contact roller. -Electronically controlled sectional sanding pad, element width 50 mm -Motor power 15kW 2nd unit type E -Sanding shoe unit -electronically controlled link pressure beam, element width 25 mm -Motor power 15 kW -Infinitely variable sanding belt speed 2 to 18 m/s via frequency converter Synchronous and counter-rotation -Belt blow-off device Csdpfx Abjt Ucp Us Sohc Transport carpet with infinitely variable feed2.5 - 13 m/min Vacuum clamping device 4 kW Control of the suction slides Roller tables in the inlet and outlet Workpiece cleaning : Rotating cleaning brush 0.75 kW Machine function tested Price 15500.- year of construction 2001

Condition: used, Year of construction: 2007, functionality: fully functional, grinding width: 940 mm, grinding height: 150 mm, – Year of manufacture: 2007 TECHNICAL SPECIFICATIONS: – Grinding width: 940 mm – Grinding height: 150 mm – Min. workpiece thickness: 0.8 mm – Min. workpiece length: 230 mm – Feed motor power: 0.25 HP Csdpfxew Ip Rtj Ab Sehc – Main motor: 5.55 kW – Grinding rollers: 2 x ø 152 x 940 mm – Speed: 1400 rpm – Feed speed: 2 or 3 m/min – Extraction port diameter: 2 x ø 100 mm – Motor power: (400 V) 5600 W / S1 100% – Dimensions (L/W/H): 1090 / 1420 / 1090 mm – Weight: 440 kg

Condition: new, Year of construction: 2025, New machine Year of manufacture 2025 Edge sanding machine with integrated dual conveyor feed system for solid wood parts, veneered edges, and curves, featuring oscillation of the entire sanding unit. Processing of solid and veneered edges either manually or with automatic feeding: - On the veneer sanding side, along the two stop plates (with infeed stop including integrated extraction slots and fine adjustment according to removal scale) onto the elastic sanding pad (oscillating for uniform use of the graphite lining, including grit compensation adjustment and belt tension relief via two deflection rollers), with infeed stop extension, table size 1180 x 325 mm. Manual processing of straight and curved solid wood parts: - On the solid wood sanding side against the continuous, glide-backed sanding belt support, table size 1180 x 325 mm including miter fence with scale. - On the front side with an optionally quick-mountable semicircular table (with dust extraction holes) against the rubberized belt drive roller Ø 90 mm, support radius 300 mm. - On the drive roller, optionally with a quickly mountable auxiliary cast iron table (with dust extraction holes) 400 x 500 mm on an oscillating spindle for use of sanding drums Ø 25, 30, 40 and 45 x 100 mm for external and internal curves, with spindle safety cover. Design: Robust machine frame with heavy cast iron tables, sanding unit motorized height adjustment up to 120 mm and tiltable up to 45° without any table adjustments (patented construction), belt drive motor 3 kW (4 HP), 400 V/50 Hz, with motor protection switch, separate motor for belt oscillation, oscillation stroke programmable from 10 - 90 mm, control box integrated in frame, constant belt tension with length compensation, belt tracking adjustable, safety guard, dust extraction via two extraction hoods, flexible hoses and common internal pipe to 150 mm connection, recess in frame for easy transport with pallet or forklift, belt width 150 - 200 mm, belt length 2000 mm, working height 830 mm (solid sanding table) or 900 mm (veneer sanding table), net weight 750 kg, footprint 1150 x 800 mm. Feed system: Integrated in the frame, two parallel transport belts 50 mm wide, spaced 250 mm apart on the underside, 20 mm wide top pressure rollers, 0.55 kW (0.75 HP) motor, continuously adjustable speed 3 - 15 m/min. COMFORT version Kündig UNIQ-S Including table extension UNIQ/UNIQ-S/Flash Including upper extraction duct UNIQ without slide Including semicircular table for belt drive roller UNIQ-S Availability: short-term Cjdpfow Tfx Dox Ab Sehc Location: Flörsheim

Condition: used, Year of construction: 1984, Used machine Year of manufacture: 1984 Chedpfx Abew R Hh Uo Sjc Completely checked and serviced Features and technical data: Includes combination unit with contact roller and sanding pad Height-adjustable contact roller for calibration Air-cushion pressure shoe controlled via the workpiece Four-way adjustable grit compensation Pneumatic belt tensioning device Rotating structuring brush at the machine's outfeed side Sanding width: 1350 mm Abrasive belt length: 1900 mm Pass-through height: 150 mm Main motor: 15 kW Feed speed steplessly adjustable from 2.5 - 12.5 m/min Infeed roller table Additional separate structuring brush Outfeed roller table Digital display device for the electro-motor driven workpiece thickness adjustment Automatic workpiece thickness setting Extraction port: 2 x 200 mm Required space approx. 2300 x 2000 x 2300 mm Feed belt is OK; has a defect in one spot (see photo) Weight approx.: 2500 kg Images show the machine in uninspected condition! Location: Flörsheim Availability: approx. 4-6 weeks after order confirmation.