Condition: excellent (used), functionality: fully functional, 2 pieces of gate uprights, heavy-duty design, for Esterer Gatter HDE or SS 71, with cover. Gedpfx Aoxw Uf Toh Deuk

Condition: ready for operation (used), functionality: fully functional, Heavy duty log yard hydraulic crane for correction logs in sawmill infeed, including log grapples Guedpeu Nzbyofx Ah Dok

Condition: used, functionality: fully functional, Celma milling machine Bruks RR1000. In full working condition. Gusdsxu Du Ejpfx Ah Dok

Condition: like new (used), Year of construction: 2022, operating hours: 100 h, functionality: fully functional, cutting length (max.): 6,500 mm, overall weight: 3,500 kg, type of input current: three-phase, height adjustment type: electric, wheel diameter: 600 mm, total width: 2,600 mm, saw blade width: 40 mm, cutting width (max.): 1,200 mm, saw band length: 5,400 mm, Equipment: chassis, Professional Mobile Bansdsaw, TrakMet TTP600 Premium Fully Hydraulic -Electronic Thickness controller lifting cutting head up / down -Electric adjustment of bands side roller -Hydraulic adjustment of band tension -Electronic longitudinal drive of saw head -6m saw frame/track + 2m subframe. Subframe with folding hinge (transport mode). -Water cooling with electronic controlled valve (release water only when blade is working). -Sawdust collector with electric discharge -Hydraulic control station flexible position for optimal ergonomic working position -Log lifter 2m +1 slidable /flex lift arm/ 5 log support / 2 log clamp / 1 log turner / 1 log- leveling roll/ 1 log leveling roll with drive. -Control Panel flexible / adjustable for best working position, Including. ISP-010 cutting measurement calculator / Amp meter / switch for debarking machine / switch for sawdust collector / Switch for main motor 18,5 Kwa / Switch for water cooling / Cutting speed control, forward and reverse / Main safety Switch. -Board driver (pulling back system for boards -Electric conveyor for board exit from saw bead (working together with the pull back system). -Support legs for individual adjustment 10 units total, 5 on each side. -Chassi with two 1800 kg axels both with brake system. Total weight 3,5 tn gross weight. Road legal 80 Km/h. -Laser -Equipped with programable frequency converter for smooth start and eliminating power peeks Gusdpfx Aexvtv Ujh Dok -The saw machine is in absolute mint condition, less then 100 hour on the clock Please reach out for more details, video material, etc. Open to discuss price and logistics

Condition: refurbished (used), Year of construction: 2002, operating hours: 23,000 h, functionality: fully functional, machine/vehicle number: GSO-1513, total length: 3,840 mm, total width: 1,230 mm, total height: 2,600 mm, type of input current: AC, input voltage: 400 V, feed rate X-axis: -2,000 m/min, working width: 200 mm, warranty duration: 12 months, power: 29.5 kW (40.11 HP), DSG-200 for slat production Machine has been completely overhauled and brought up to date in terms of control technology - this guarantees the supply of spare parts. Very robust machines - feed system is controlled by servo motors. Machine is equipped with 2 saw frames - transport system channel or side center ruler module Cutting height - 250mm Saw blades, machine and service from Wintersteiger Gujdpfx Ahjt Hd Eno Dek

Condition: like new (used), Year of construction: 2017, operating hours: 500 h, functionality: fully functional, machine/vehicle number: 17002, cutting length (max.): 6,000 mm, power: 45 kW (61.18 HP), Kara F2000, little used, year of construction 2017, motor power 45kW, with feed and discharge system, dimensioning computer-controlled, incl. crosscut saw, incl. 6 saw blades, built-up grinder, incl. integrated extractor. Guedpfx Asrg E Exeh Djk

Condition: excellent (used), functionality: fully functional, Complete saw frame for Esterer Gatter HDE or SS 71. Gusdpfxjxw Ubns Ah Dok

Condition: used, Year of construction: 2022, functionality: fully functional, COMPLETE SAWING LINE - VTZ 1400 PLUS log band saw with BM 900 chipper canter, including all necessary conveyors - FRC chipping edger with 3D scanning and optimisation, including all necessary conveyors - Automated stacking machine Gsdpsxlym Ejfx Ah Djuk - Waste conveyors

Condition: used, functionality: fully functional, Centre conveyor and additional rolls for the CAMBIO log peeler. Gsdpfx Ajvcl H Aoh Djuk

Condition: ready for operation (used), Year of construction: 1975, functionality: fully functional, machine/vehicle number: 700002/044, Wurster & Dietz gang saw system type GDZ GE S, year 1975, M.-Nr. 700002/044 Godpjxvq T Djfx Ah Douk Splitting wedge, W&D hydraulic clamping carriage with auxiliary carriage and rail Round log infeed with singulator, log carriage with log ejector Gang saw roller conveyor with lifter/extractor Approx. 40 conveyor rollers, each approx. 1.60 m wide, not driven Shaker chute for gang saw waste onto the conveyor belt Electrical control cabinets, control boxes, and operator panel With spare parts inventory and Vollmer gang saw blade sharpening machine

Condition: good (used), Year of construction: 1995, functionality: fully functional, 1 used Cambio 70 debarking machine with Mayrhofer mechanization, consisting of: Mayrhofer roundwood infeed system with 4 strands, approx. 6 m long and 6 m wide; singling stage and feeder onto the block conveyor; Cambio 70 debarking machine; length measurement; 4 discharge bunkers; overall line length 45 m; scraper conveyor for bark removal. Inspection in operation is possible at any time. Gjdpjxvpq Iofx Ah Dsuk

Condition: new, The AE-400 SERVO edger is designed for longitudinal trimming and slitting of side boards fed to the machine at high speeds (100-400m/minute). The machine works directly with conveyors feeding and receiving boards in automatic mode. The machine is equipped with a board scanner from above and below. The maximum instantaneous efficiency of the edger up to 55 boards/min can be obtained by cutting a 2.5 m board to the same width without changing the spacing of the saw blades. Each adjustment of the edger node devices to the width of the board causes a change in performance. The average productivity of the machine, depending on the work configuration, ranges from 35-48 boards/min. technical dance No. Parameter Value 1. Saw spindle drive motor power. 55 kW 2. The number of revolutions of the saw spindle. 3550 rpm 3. Diameters of used saws. 400mm 4. Maximum cutting height. 50mm 5. Number of saw blades used. 2 to 3 pcs. (2 floating saws) 6. Minimum board length. 2000mm 7. Maximum raw material length. 6200mm 8. Maximum number of boards after cutting 1 board: 2 pcs. 9. Feed: 100- 400m/min Cutting for 1 board - with two saws (2 floating saws): 1. Minimum saw spacing (board width after cutting) 75 mm 2. Maximum spacing of extreme saw blades (board width after cutting) 300 mm Gujdjnygvrepfx Ah Dok Cutting into 2 boards - with three saws (2 floating saws), 1. Spacing the saws on the fixed coupler (board width after cutting) 50-100mm 2. Spacing between floating saws (board width after cutting) 50-100mm 3. Cutting into 2 boards minimum 2 x 50mm 4. Cutting into 2 boards maximum 2 x 100mm Other machine configurations are possible on request. We also produce other sawmill lines: log sorting plants, board sorting plants, board stackers, conveyors.

Condition: good (used), Hydraulic clamping trolley Type VS. Track width 790 mm. Trolley height 390 mm. With auxiliary trolley HEH or HKE. Godpfx Ajxwn Rvjh Djuk

Condition: refurbished (used), 1 set = 8 guides suitable for the ESTERER SS 71 or SS 56 gang saw, completely refurbished, i.e. all sliding surfaces re-milled to precise angles. 1 set of upper guide shoes, bore 110 mm Ø, height 250 mm 1 set of lower guide shoes for bearing 6210 for SS 56 Gujdpfxew Eu Aks Ah Dsk

Condition: used, Year of construction: 1989, machine/vehicle number: 1025, arm reach: 13,300 mm, load capacity: 2,300 kg, track width: 3,000 mm, Equipment: cabin, crane, Year of manufacture: 1989 (factory overhaul 2007) Machine number: 1025 Track, m: 3.0 Crane type: OBX IV (year of manufacture 2007) Reach: 13.3 m Load capacity without grab: 2,300 kg / 13.0 m Grapple: included Crane arrangement: behind the cabin Gusdpfx Ajv Ddtkjh Dsk Cab side: left Saw: 1.3 m Alpha Measurement: dividing aid with 2-level measurement Year of manufacture 2007 !! Sold on behalf of the customer!! Available from April 2025

Condition: used, Year of construction: 1979, functionality: fully functional, machine/vehicle number: 3283, Häwa Round Timber Milling Machine Type 249-193-00 Year of manufacture: 1979, Serial No. 3283, Log diameter: 0.30 - 1.30 m Gjdpfxsxvq Hke Ah Deuk Log length: 2.20 - 6.50 m Connected load: 55 kW Round timber feeding station, log carriage, Milling head debarking, scraper chain conveyor with discharge Log sorting system left/right Control panel and electrical cabinets

Condition: used, type of input current: three-phase, cutting length (max.): 6,000 mm, cutting height (max.): 650 mm, roll diameter: 700 mm, saw drive: 27,200 W, input voltage: 380 V, conveyor belt speed: 30,000 mm/s, Equipment: documentation/manual, For sale: used but well-maintained automated wood cutting line NG-700L, manufactured in Lithuania. The machine has been lightly used and is still connected; last time it was operated about a year ago and worked without issues. The line is offered complete with: log loading ramp, Gjdpfx Aew N S S Ajh Douk receiving and sorting table, auxiliary outfeed table (roller conveyor), control cabinet, detailed technical drawing and leg layout scheme for relocation. Technical specifications: Log length capacity: 2.5 – 6 m Max. log diameter: 65 cm Saw wheel diameter: 700 mm Saw linear speed: 30 m/s Productivity: 1.5 – 3.0 m³/h Rated supply voltage: 380 V ±19 Maximum power consumption: 27.2 kW Log clamping and turning: hydraulic Dimension setting: programmable Line operation: operator console Additional information: The equipment is in good condition and ready for further use. Full documentation and drawings are included to facilitate transport and installation.

Condition: excellent (used), functionality: fully functional, Schorch electric motor 75 kW - 735 rpm. For direct frame saw drive. With reinforced bearings. Equipped with a 400 mm diameter pulley. Gujdpfxjxvpqbe Ah Djk

Condition: excellent (used), 1 saw frame in very good condition 710 mm frame width with 8 guide shoes in good condition Gsdpolni Uqefx Ah Douk

Year of construction: 2007, condition: excellent (used), functionality: fully functional, REMONNAY edger and resaw type DR8/225, year 2007 7-arm variable adjustment, 2 x 110 kW motors each Pre-cutting saws of the side fabric Cutting height 225 mm S-acceleration with infeed roller table with turning and alignment table Splinter separator with two lamellas Board cross conveyor Gjdpfx Asfcltgsh Deuk Roller conveyor with pull-off device Electric control cabinet with control panel incl. all accessories (circular saws etc.)

Year of construction: 2000, condition: excellent (used), functionality: fully functional, Very well-preserved HIT curved conveyor / for board or workpiece separation, heavy-duty design. Conveyor height approx. 3.0 m. Board length up to 6.5 m. Sturdy chains with 6x2 slat carriers. Integrated flush roller conveyor. Transfer cross conveyor, height-adjustable. Slab discharge flap. Driven by SEW geared motor with brake. Curved conveyor split and bolted in the middle for transport. Ideal upstream of a twin edger or stacking system. Gjdpfx Asxl Edioh Dsuk

Year of construction: 2005, condition: ready for operation (used), functionality: fully functional, used automatic edging line Möhringer Autojet S-singulator, infeed roller conveyor, through-feed cross-cutting Godpfx Ahjw Tkt He Dsuk automatic measuring table with infeed edging saw with double-lamella chip separator driven roller conveyor with pull-off device control system and electrical cabinet

Condition: ready for operation (used), Year of construction: 1972, functionality: fully functional, Braun resaw Type CH6B-70, year 1972 Swing frame without width adjustment with splitting wedge Saw tensioner - hydraulic side pressure, year 1989 Round timber transverse conveyor with 4 strands, approx. 7 m long, year 1980 Round timber singulator with 5 strands, approx. 1.40 m long, year 1980 Mayerhofer carriage Type VH with auxiliary carriage, year 2002 Powered resaw roller conveyor, 4 m long, 1.60 m wide, year 1980 Powered resaw roller conveyor, 1.60 m wide, approx. 15 m long with integrated ejector with 5 strands Transverse conveyor with 5 strands, approx. 6 m long, for side timber, year 1980 Gusdpfxov I D Ezo Ah Dok Sharpening equipment consisting of: Meinert resaw saw set machine PH4D, year 1967 Vollmer automatic resaw saw set machine AT

Year of construction: 1995, condition: excellent (used), functionality: fully functional, Möhringer gang saw system consisting of: Godpfx Aev Uat Ueh Dsuk Round log loading station with feeder Hydraulic clamping carriage with auxiliary carriage Möhringer OSS71 gang saw, built in 1995 with width adjustment and Jansen clamp Hydraulic riving knife and cross-cut saw Gang saw roller conveyor Vollmer CnHv gang saw sharpening machine Vollmer AT gang saw setting machine Vollmer PH4D gang saw setting machine

Condition: ready for operation (used), functionality: fully functional, Wurster & Dietz Trimming and Re-Cutting Machine Type FR7 with in-machine adjustment Star-delta soft start Feed roller table Single-blade spiral roller chip separator Chips discharged into a trolley Guodjv I D Shspfx Ah Dsk Main product on the feed roller table