Condition: ready for operation (used), The conveyor is 13 meter in length with built in screen for sawdust separation. Width 600 mm. Metal detector included with electrical control cabinet. Pgodpfxozb U Hys Alwjt

Condition: excellent (used), functionality: fully functional, Complete hydraulic feed unit for EWD Esterer creel type HDE. Pjdjrrxtpspfx Alwjgt Very well maintained. Infinitely variable from 0 - 12m / min.

Condition: new, Year of construction: 2025, Stepfeeder MUL SF 3 For log diameter 10 - 50 cm Available in 2, 3, 4 or 5 sections Pjdev Ak Ifopfx Alwegt Width starting from 1800 mm Height - minimum 1500 mm Heavy and solid constructed Hydraulic movement. Max 20 strokes per minute. Fully automatic loading system with sensors and controller

Condition: excellent (used), functionality: fully functional, Year of construction: 2023, Full trimmer saw - 21 sawblades, trimmer speed 110-130 pcs/min, dismantled, stored, was in use in green sorting line Pgedpfx Aew S Eylslwet

Condition: used, type of input current: three-phase, cutting length (max.): 6,000 mm, cutting height (max.): 650 mm, roll diameter: 700 mm, saw drive: 27,200 W, input voltage: 380 V, conveyor belt speed: 30,000 mm/s, Equipment: documentation/manual, For sale: used but well-maintained automated wood cutting line NG-700L, manufactured in Lithuania. The machine has been lightly used and is still connected; last time it was operated about a year ago and worked without issues. The line is offered complete with: Pgjdpfx Asw N S S Aslwst log loading ramp, receiving and sorting table, auxiliary outfeed table (roller conveyor), control cabinet, detailed technical drawing and leg layout scheme for relocation. Technical specifications: Log length capacity: 2.5 – 6 m Max. log diameter: 65 cm Saw wheel diameter: 700 mm Saw linear speed: 30 m/s Productivity: 1.5 – 3.0 m³/h Rated supply voltage: 380 V ±19 Maximum power consumption: 27.2 kW Log clamping and turning: hydraulic Dimension setting: programmable Line operation: operator console Additional information: The equipment is in good condition and ready for further use. Full documentation and drawings are included to facilitate transport and installation.

Condition: used, Year of construction: 1987, functionality: fully functional, machine/vehicle number: 812 - 5547/V.01.87.110, overall weight: 19,190 kg, For sale is a well-maintained Nicholson debarking plant A 5 B for log diameters up to 56 cm. We used the machine in our small-diameter sawmill (maximum diameter 25 cm). It ran without issues until recently. The knife cylinders were replaced shortly ago and are absolutely airtight. The rotor bearings are in perfect condition. This is a very powerful and fast unit. Nicholson debarkers are straightforward to operate! - Minimum length: 200 cm - Minimum diameter: 7.6 cm - Maximum diameter: 56 cm - Weight: 19,190 kg Pedpfxow D Hy Sj Alwegt - Machine dimensions: 470 x 251 x 335 cm incl. rotor - Feed speed up to 114 m/min (currently set to 95 m/min)

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, Complete sawmill for pallet lumber production, consisting of: Individual sale of machine packages is also possible. Psdox T Azwepfx Alwsgt 1. Log yard Häwa, with root reducer and Valon Kone debarker VK 90. Calibrated factory inlet measurement system, manufacturer Jörg. Sorting with 28 bins. Log length 2.0 - 5.0 m. Log diameter 20 - 90 cm. 2. Sawmill: Möhringer band saw, running band saw with Flexi Drive carriage. Splinter detection device. Log feeding with stepped singulation. Laser measurement system Bidac. Kallfass model trimming. Resawing: EWD Optimes with chipper PF 19 and double-blade saw NKU. Brodbaek edger. Stacking system for main product, empty pallet handling for main and side products. Kuka robot for packing side products and main products, four dimensions possible. Complete mechanization, electrical and electronic control cabinets, etc. Disposal. Detailed plans or a video can be sent upon request.

Condition: used, Year of construction: 2006, For sale: LBL Brenta log clamping carriage – year of manufacture 2005 LBL Brenta log clamping carriage This LBL Brenta log clamping carriage has been completely overhauled and is ready for immediate use. The machine comes from a professional sawmill and was regularly maintained until it was dismantled. Equipment 4 independently adjustable clamping supports Integrated log turner Integrated flippers Pedpsx Ndpbofx Alwsgt Distance between clamping supports: 2,300 mm – 1,800 mm – 1,400 mm New drive unit Including rails and control panel Ready for immediate transport and loading This machine is ideal for the precise cutting of roundwood and impresses with its robust construction and the proven LBL-Brenta technology. Please refer to the attached PDF documents for the technical data, dimensions, and drawings. Inspection is possible at any time by appointment. We are available for further information, photos, or videos.

Condition: as good as new (ex-display), Year of construction: 2015, functionality: fully functional, saw drive: 380 W, PRIMULTINII SIF 1600 band saw, in very good working condition. Pedpfx Aloyha A Towsgt

Condition: refurbished (used), functionality: fully functional, year of last overhaul: 2025, 1) Log Yard with 10 Boxes (Drop Boxes) – New and Used Log Feed and Sorting Line New Feed rate 50 m/min. as well as the following used components: Comprising: New cross feed conveyor, step feeder Used log transfer carriage, Used log transfer carriage with ejector, Used Cambio 50 debarker, Used split detection unit with belt, Measuring section, sorting log carriage. Including debarking; Inspection and Painting; including log infeed. Without boxes, sheet metal cladding, measuring system, discharge control, or control cabinet. Root reduction. 2) Log Infeed for Canter Line Heavy-duty cross log conveyor NEW Cross log conveyor in 4-strand execution Axle spacing: 7.5 m Total length: 8.0 m Drive shaft: 100 mm diameter Chain: Bush conveyor chain, pitch 100 mm – heaviest version Fixed rear stops, without sheet metal cladding Steel substructure: HEB 200 Construction height: 1000 mm Drive: geared motor 7.5 kW 3) Equalizer NEW Number of chains: 4 Axle spacing [mm]: 3500 Overall width [mm]: 5730 Paddle spacing [mm]: 1000 Drive shaft diameter [mm]: 100 Drive SEW [kW]: 7.5 Speed [m/min]: 10 Design: completely sheet metal covered between chain runs 4) Step Feeder NEW Feed steps: 4 Overall width [mm]: 4200 Plate thicknesses [mm]: moving steps 12 mm, fixed steps 20 mm Drive SEW [kW]: 18.5 Drive via crank mechanism and geared motor 5) Canter Line (WD brand) Log transfer carriage before RB 2 infeed Length extension to 18.5 m – drive and deflection RB 2 infeed with powered steel chain bed, designed for lateral log infeed. Conveyor chain with carrier dogs, frame in welded construction. Intake and centering unit ZE with log rotation unit TDV and centering device. Feeding unit ZE Log length: 2.5 – 5 m Clear width: min. 80 mm Clear width max.: 780 mm Construction height: 1000 mm Weight: 5400 kg Pgjdpfxsykr Aqe Alwjt Profile canter FZ 3 Machine frame with base frame 2 knife head housings with main shaft bearing, 2 knife heads with finishing segments, Drive power 90 kW Log diameter: min. 100 mm, max. 400 mm Chipping height above the chain max. 515 mm Distance between disks max. 570 mm Distance between disks min. 60 mm Disk diameter: 1260 mm Positioning via electric motors 2 hydraulic units 35 kW hydraulic pre- and post-cut Pre-cut square timber turning device Electrically powered roller conveyor TR 800 Centering and feeding unit ZE with FZ 3 canter

Year of construction: 2015, condition: used, functionality: fully functional, A used electric 4-step feed unit manufactured by Ingenjörsfirma Gösta Hedlund AB in very good condition. Podpfjyiaafsx Alwogt

Condition: used, Chip screen Year of manufacture: 1996 Manufacturer: Konewood/Andritz Podpfxsyhn Dxo Alwjgt Model: CS600 Screen capacity: 400-675 m3/h Weight around: 10 tons

Condition: ready for operation (used), functionality: fully functional, The following components of the machine have been renewed: Feed gearbox: overhauled in 2023 Rotor: factory-refurbished, installed in 2024 Hydraulic roller opening: installed in 2022 Extraction unit: newly installed in 2021 Infeed table: year of manufacture 2021 TECHNICAL DETAILS Rotor: Air ten, 800 mm Max. log diameter: approx. 75 cm MACHINE DETAILS Overall length: 9,800 mm Wheelbase: 8,800 mm EQUIPMENT Spare parts package Pgsdpjxr Ityofx Alwst Note: An electrical control cabinet is not included in the offer. However, the seller can supply a new control cabinet for an additional charge.

Condition: like new (used), Year of construction: 2023, functionality: fully functional, Centering with 2 x 3 rollers, diameter 200 x 300 mm Podpfjx Eig Ujx Alwegt Drive 2 x 3 kW Centering with synchronous linkage and servo cylinder The centering can optionally be equipped with an extraction device for easy tool change

Condition: used, functionality: fully functional, BARTON log ladder Pjdpfx Alowi I Ihjwogt - 4 steps - Width: 120 cm - Height: 250 cm

Year of construction: 1970, condition: good (used), functionality: fully functional, Stenner RESAW VHL 48 manufacture Stenner UK S/N J2103 year 1970 (original photos coming soon) Principal Dimensions and data: Diameter of saw pulleys: 48"= 1220mm Width of saw pulley face-standard 5" (127mm) Width of saw pulley face-optional 5 1/2" (140mm) Maximum width of saw - standard 5 1/2" (140mm ) Maximum width of saw-optional 6" (150mm)A Minimurn length of saw 25" 8" (782mm) Maximum height of top saw guide above table 28" (710mm) Table height from floor level 31 1/2" ( 800mm 9 Overall height from floor level 9.1" ( 2770mm) Overall width 8.1" (2460mm) Speed of saw pulleys,r.p.m. 8,000 (2440m/min) Horse power range 30 kW Size of fast and loose pulleys 20"x6 1/2" Feed speeds, standard; f.p.m. or m/min. 0-140 (0-42.6m) Shipping Specification : Standard Machine : Pjdpfx Ajvuhumelwsgt Net weight, lbs. 3583 kg The VHL 48 is a band resaw of advanced design embodying many new features resulting from a close study of user-operator requirements, and the necessity to provide fast and accurate sawing coupled with ease of operation, reduced operator fatigue, low maintenance, and increased safety. The design caters fully for these essential factors which contribute to a markedly high level of operating efficiency. The machine is primarily designed for the planning mill and joinery shops. The thin bandsaw gives the machine a high timber recovery rate; the loss due to saw kerf being very low. Compared with a circular radial-arm resaw, the VHL is faster, less wasteful, and uses less power for a given class of work general The VHL is made only as, a left-hand machine, i.e. the saw pulleys run in an anti-clockwise direction when looking in the direction of the feed. The drive is normally arranged to give a saw speed of 8,000 feet permin. (2440m l/min.) Main Drive The main drive is applied to the bottom saw pulley spindle which is prepared for vee belt, flat belt, or flat belt fast and loose pulleys to suit the proposed driving unit. Complete electric motor drives, up to 40 H. P. and for most current supplies can be provided; they include two vee pulleys, set of vee belts, belt guard, motor with slide rails, starter and a master stop button which is fitted to the machine base close to the sawyer's position. horizontal rollers The horizontal rollers are 6" (152mm) diameter and extend the full opening on the fence side and 6" (152mm) beyond the table on the open side; they are normally free-running idle rollers. They can be supplied hydraulically driven as optional equipment, either with the machine or after installation; the rollers are then driven in synchronism with the main feed rolls, by a separate motor. The drive is arranged so that the open-side roller at the outfeed end rotates in the reverse direction to facilitate the return of timber to the sawyer. The roller in front of the saw is moveable sideways to permit rapid saw changing.

Condition: reconditioned (used), functionality: fully functional, machine/vehicle number: 03013, BERCAR plank cutter, maximum cutting length 1100mm, maximum cutting height 170mm. Pedpfovvpb Rex Alwogt 10 hp engine.

Condition: new, The new log band saw from Hauslhof is suitable for a log diameter of up to 65 cm and has good cutting accuracy. Its ease of use makes it ideal for forest owners who want to start cutting their own wood, regardless of the type of wood. It can be extended indefinitely with extension sections and can be easily assembled and dismantled. Manual feed and cutting height adjustment mean low maintenance. CE tested. Technical data: max. log diameter: 650 mm max. board width: 475 mm motor output power S6: 6.5 kW (5.5 kW S1) 400 V Pgedpfx Alovru Ubowet cutting length basic version: 2950 mm saw band length: 3658 mm saw band width: up to 35 mm band speed: 20 m/sec cutting length extension section optional: 1.95 m weight: 335 kg possible optional equipment - extension section extends the cutting length by 1.95 m each

Condition: excellent (used), functionality: fully functional, Möhringer log and cant feeder, for singling and allocating round timber and cants to the carriage. Optimal separation even for different diameters. Complete with hydraulic unit and solenoid valves. Little use, from a small joinery workshop. Dismantled and loaded free on truck. Pedpsyfv A Refx Alwsgt

Year of construction: 2008, condition: excellent (used), Sorting system for small-diameter wood and stakes for RH milling machines or other purposes. Consisting of: Inclined feed with retaining hooks. Pgodpewqdc Rofx Alwst Disc sorting / cascade system with 3 separation steps. Wood length from 0.3 m to 5.5 m. Wood diameter up to approx. 12 cm. Ready for demonstration.

Condition: good (used), 2 pieces of frame stands. Pgodpjwwr Eajfx Alwst Oscillating shaft and overhung shaft. 2 pieces of split lower frame rollers. Shafts and bearings for rollers. Guide bracket, etc.

Condition: excellent (used), functionality: fully functional, Robust Möhringer auxiliary wagon in steel construction. Reinforced. Can also be used as an auxiliary wagon for other clamping trolleys with a 900 mm gauge, such as Linck, Weiss, Mayerhofer, etc. Pgedpjwv Rcuefx Alwst Gauge: 900 mm. Wagon height: 420 mm. Tilting carriage with continuous chain, powered. Hydraulic carriage for round timber, hydraulically adjustable and tiltable. Feeding from both sides possible. Technically inspected.

Condition: good (used), Year of construction: 1998, functionality: fully functional, Canter Linea COSTA, model Prisma 30, with roller infeed for 6 m and roller outfeed left and right Psdpfowt Uqqsx Alwogt

Condition: ready for operation (used), Year of construction: 2013, For sale is a Baljer Zembrod OBX V-24 with up to 200m of rail. Pedpfxjwxndne Alwegt

Condition: good (used), functionality: fully functional, Passage height 160 mm Passage width 800 mm Feed speed steplessly adjustable 0–70 m/min Hydraulic width adjustment with pneumatic cylinder, electrically adjustable, Pgjdowx Hrwjpfx Alwet Drive motor Siemens 50 kW with V-belt drive, Wood infeed and outfeed table, The machine has been technically inspected and is in working condition.