Used straightening-, and bending machines for sale (56)

Condition: refurbished (used), PORTAL STRAIGHTENING PRESS PRESSURE 450t WORKING AREA LONG: 5200mm WIDTH: 2300mm Hodefcnu Iopfx Ah Djfr HEIGHT: 1000mm

Condition: used, Year of construction: 2008, Technical details: pressure: 6 t stroke: 1020 mm total power requirement: 3,5 kW Can only adjust between tips * Hfodpsw Ng D Tofx Ah Djr

Condition: good (used), Year of construction: 2007, Marca: SCHIAVI Modelo: HFBs 100/ 3 Nominal capacity: 100 tons Table length: 3110 mm Work table width: 90 mm Working height without rise: 910 mm Maximum distance between tables: 450 mm Maximum nominal stroke: 250 mm Gooseneck depth: 405 mm Distance between uprights: 2700 mm Maximum pressure: 303 MPa Hfodpexaz Igefx Ah Djr Oil capacity: 126 dm³ Maximum length (footprint): 4000 mm Motor power: 7.5 kW

Condition: new, pressure 40 t stroke max. 300 mm bending capacity max. - flat 250 x 16 mm working feed 10 mm/sec Control NC Height of Toolings 250 mm Hodpsuddfbsfx Ah Djfr total power requirement 4 kW weight of the machine ca. 1190 kg required space 650 x 1250 x 1300 mm The Gerd Wolff HP 40 is a hydraulic horizontal press machine with many many possible combinations. Whether it is the bending of tubes, the punching of profiles or the cutting of sheet metal - with the right accessories, the HP 40 is a multifunctional machine among the presses. Standard accessories - ergonomic tool clamping table - easy tool change - hydraulic speed and pressure adjustment - easily adjustable back gauge - induction hardened support pins - NC control Highlights - control panel with digital display - Easy tool change - hardened support pins - hydraulic speed regulation The HP 40 is manufactured for our sales brand "GERD WOLLF Maschinenfabrik", by a renowned manufacturer from Türkiye. The pictures are for orientation only and are not true-to-scale representations of the machine.

Condition: new, AUTOMATIC DOUBLE SPEED MOTORIZED HYDRAULIC PRESS WITH RAPID POWER 20 TON Max capacity TON 20 Approach speed (in rapid) mm/min 1700 Working speed (in slow) mm/min 440 Cylinder rod stroke mm 300 Hsdpfx Ahjrvz A So Dofr Cylinder rod diameter mm 45 Shank diameter mm M14 Tank capacity liters 30 Max pressure bar 350 Voltage V 400 Frequency Hz 50-60 Motor Power kW 1.5 Max absorbed current A 3.8 Weight Kg 200

Condition: good (used), TABLE PRESS WITH POWER UNIT Hfedpfjk Adfnex Ah Djr

Condition: used, Year of construction: 1990, pressure 3 t throat 0 mm stroke 200 mm total power requirement 15 kW weight of the machine ca. 4 t Hjdpfx Ahet Hw Ams Djfr dimensions of the machine ca. m Fully Automatically Straightening Press, 3 Stations,parts turning, (bolts)

Condition: excellent (used), pressure 6,3 t throat 200 mm stroke 200 mm Hfodpfx Aswuu A Ajh Dor dayligth max 500 mm table surface area 450 x 420 mm weight of the machine ca. 1,5 t dimensions of the machine ca. 1,2 x 0,6 x 2,0 m

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, Used straightening press in very good condition for sale. Hfedpfx Aeufhzvoh Dsr This universal and robust Stierli straightening press has a 5m straightening beam. It can process beams up to HEA-600 and HEB-600 (with S-235). The machine is operated with the proven Stierli stroke fine adjustment control. It is therefore very easy to operate and allows fast, precise straightening and bending. Additional options can also be added on request, e.g. driven roller conveyor, NC control, laser measurement etc... (Note: The photo does not correspond to the original image)

Condition: new, pressure 20 t stroke max. 200 mm bending capacity max. - flat 200 x 10 mm working feed 10 mm/sec Control NC Height of Toolings 150 mm total power requirement 2,2 kW weight of the machine ca. 640 kg required space 600 x 1100 x 1220 mm The Gerd Wolff HP 20 is a hydraulic horizontal press machine with many many possible combinations. Whether it is the bending of tubes, the punching of profiles or the cutting of sheet metal - with the right accessories, the HP 20 is a multifunctional machine among the presses. Standard accessories - ergonomic tool clamping table - easy tool change - hydraulic speed and pressure adjustment - easily adjustable back gauge Hsdpfx Astq Du Rsh Dsfr - induction hardened support pins - NC control Highlights - control panel with digital display - Easy tool change - hardened support pins - hydraulic speed regulation The HP 20 is manufactured for our sales brand "GERD WOLLF Maschinenfabrik", by a renowned manufacturer from Türkiye.

Condition: new, Year of construction: 2024, Electro hydraulic press 110 Ton Made in Italy The P110 MR is equipped with: 400 V 50-60 Hz immersed motor control unit. Pump for fast approach and return in 20 bar calibration. Adjustable pressure pump with handwheel to obtain the required power. Pressure relief valve with mechanical block to prevent overpressure. Pressure gauge (standard) that allows to calibrate with extreme precision the delivered power. The P110 MR is the only hydraulic press consisting of 2 laser-cut FE 510 monolithic structure uprights. without welding in the places of greatest stress This feature gives it extraordinary robustness. It is non-deformable and guarantees tight working tolerances. The P110 MR is equipped with a 30-litre tank and has a rapid descent speed of 1,400 mm/min. Weight : kg 1,100 Max pressure : bar 350 Max. flow rate : t. 110 Rapid flow rate :l/min 34 Slow flow rate : l/min 5 Inside shoulders : mm 1004 Rapid rod feed : mm/min 1.400 Slow rod feed : mm/min : 130 Voltage : V 400 Frequency :Hz 50-60 Power : kW 3 Max. absorbed current : A 7,3 Cylinder stroke : mm 300 Cylinder diameter : mm 200 Stem diameter : mm 110 Hodpofh R N Djfx Ah Djfr Piston descent speed : mm/sec 23 Tank capacity : litres 30

Year of construction: 1984, condition: used, Printing machine, embossing machine, stamping machine -without function, control: defective -pneumatic-hydraulic press - Stroke: 50mm Hodpfjd Hp Tzex Ah Dofr - clearance between columns: 850 mm -Table surface: 400 x 370 mm -Dimensions: 1285/590/H1820 mm -Weight: 416 kg

Condition: used, Year of construction: 1984, pressure 10 t Hfedpfx Ahst Hwwde Djr distance between columns 500 mm stroke 200 mm total power requirement 10 kW weight of the machine ca. 4.500 kg dimensions of the machine ca. m

Condition: excellent (used), Year of construction: 1970, pressure 6 t throat 250 mm stroke 550 mm Hsdpfx Asvpaadeh Dsfr table surface area 650 x 500 mm total power requirement kW weight of the machine ca. 3,5 t dimensions of the machine ca. 1,2 x 1,0 x 2,8 m

Condition: used, pressure / t distance between columns / mm stroke / mm This ram was dismantled from the MAE HY S 315s press Data from the machine to which Ram belonged: Press pressure devi. 315,000kg pressure up Ram stroke 800 mm Projection / table depth 720 mm Hfodpjn Uzbrofx Ah Djr Installation height 800 mm Table width 1200 mm Table height 1200 mm Total height / width / depth 4200 mm / 2200 mm / 4350 mm Weight 30 tons Machine body as seen on the low loader is 4 tons It's just the pestle!!!

Condition: good (used), Make: Ursviken Type: VPF 1000/800-5,0 Control: Siemens Simatic panel Year: 1970 Hodpfx Aokvmi Seh Dofr Hydraulic press for fabrication off large componts like dish heads tanks boiler shipyard and steelconstruction Renewed in 2015 with Siemens SIMATIC panel and E-Cabinet Rittal Build in height 2950 mm Maximum die height 1500 mm Movable Table & Piston in X-Ways Large package Die tooling radius 10/20/30/50/60/80/100 Pressing force 210 kg/cm2 Maximum stroke 800 mm Machine 2350 mm placed in ground Specifications Metric US Standard Capacity Kg 1000 Ton Distance between column 5010 mm Table Length 3000 mm Table Width 2000 mm Table Height 550 mm Ram stroke 1450 mm Approche speed 50 mm/min. Working speed 5 mm/min. Return speed 50 mm/min. Dimensions (Estimate) Length 0 mm Width 0 mm Height 0 mm Weight 0 kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: ready for operation (used), Maximum forming capacity at full length: 9 gauge (mild steel), corresponds to approx. 3.8mm, max. forming length: 3200mm, min. flange height: 6 x material thickness, clamping beam speed: maximum speed: 91.44 mm/s, downwards: 39.88mm/s, bending speed: 1879.6mm/s, bending angle range: 0°-180°. Dimensions X/Y/Z: approx. 5160mm/2220mm/1780mm, weight: approx. 5300kg. Hfedpotia Hhefx Ah Djr

Condition: used, Profile bending machine, bending machine, flat bar bender, horizontal bending/straightening press Hfodpeh Tk Daofx Ah Der -Flat bar bender: hydraulic profile bender -Underframe: on castors, table foldable on both sides -Operating mode: manual and automatic mode -Accessories: see photos -Total dimensions: 2155/1320/H1070 mm -Transport dimension: 1320/840/H1245 mm -Weight: 404 kg

Condition: ready for operation (used), Year of construction: 1950, Sale only within the EU member states! Hfsdpfepz Ht Nox Ah Djr No private sale MAE can be viewed with pleasure. Any warranty right is excluded. For the correctness of the technical data and year of manufacture, for the completeness of accessories and tooling, as well as for the observance of all safety and environmental protection requirements mentioned in the and environmental protection requirements mentioned in the accident prevention regulations. Any warranty is excluded. For the correctness of the technical data and year of construction, for the completeness of accessories and tools Cyn79beasd as well as for compliance with all safety and environmental-requirements, mentioned in the accident prevention regulations, we take over no guarantee.

Condition: like new (used), functionality: fully functional, total height: 2,900 mm, table length: 10,000 mm, total width: 3,660 mm, total length: 10,200 mm, table height: 900 mm, table width: 2,545 mm, pressing force: 100 t, overall weight: 26,000 kg, operating speed: 9 mm/s, reverse speed: 14 mm/s, pressure: 320 bar, power: 4 kW (5.44 HP), MOBILE HYDRAULIC GANTRY PRESS WITH MOVABLE HEAD AND 10-METER LONG TABLE FOR STRAIGHTENING WELDED STRUCTURES AND CUT PLATES TECHNICAL DATA Force T 100 Motor power kW 4 Motor ventilation switch power kW 0.37 Bridge travel motor power kW 0.75 Working speed mm/s 3 Approach speed mm/s 9.2 Return speed mm/s 14.4 Max. pressure Bar 320 Working area mm 10,000 x 2,545 Hsdpfjwkvmnsx Ah Dofr Ram stroke max. mm 450 Maximum open height mm 600 Lateral travel mm 2,120 Gantry travel mm 9,140 Working height mm 900 Total length mm 10,200 Total width mm 3,660 Height mm 2,900 Weight kg 26,000 The hydraulic press TL-100/10000E belongs to the T/NC series and has been specially developed for straightening welded structures and cut plates. As with all hydraulic presses in this series, its design facilitates the loading and unloading of large workpieces. Thanks to the lateral movement of the cylinder and the longitudinal travel of the bridge, access to various pressing points is possible without having to reposition the workpiece. The machine complies with all essential safety and health requirements in accordance with CE regulations. STRUCTURE AND TABLE • Electrically welded structure made exclusively from S355JR steel. • Stabilized and machined after welding to ensure perfect parallelism and precision. • Calculated and designed using finite element software. • Longitudinal bridge travel achieved by frequency inverter and toothed belt. • Motorized lateral head movement. CYLINDER AND HYDRAULIC UNIT • Double-acting cylinder with lapped sleeve, chrome-plated piston, and maintenance-free wear-resistant guides. • Fitted with a removable and exchangeable pad to prevent piston wear and machined at the end to match the tool. • Includes standard anti-rotation device for the cylinder and a calibrated front end with limit switches for stroke adjustment. • Motorized hydraulic unit with two speeds and automatic cut-off for rapid speed. • Cylinder decompression valve. • Pressure regulator. • Glycerin pressure gauge with tonnage indicator. ELECTRICAL INSTALLATION AND SAFETY • The control panel includes a selector switch for manual or semi-automatic operation. • Selector switch for choosing between rapid approach speed and slow working speed. • Operation via pendant control with emergency stop and low-voltage control. • Includes button to confirm a cycle.

Condition: as good as new (ex-display), Year of construction: 2025, Hydraulic horizontal bending and straightening press - Fabrikat Zopf - Model T 500 with straightening equipment - Multiprogramming of 99 programs each 16 steps - hydraulic pressure 50 to. - length of stroke 300 mm - bending speed adjustable - max. working speed 10 mm/sec. - return speed 20 mm/sec. - hydraulic pressure adjustable Hfsdpfxodk H A Ie Ah Dor - maximum bending high 300 mm - motorcapacity 5,5 KW - 400 V 50 hz 3 ph. - working height 900 mm - closed table - replaceable wear plate - weight 1300 kg - bending capacity: flat material max. 300x15 mm round tube 3/8" - 2 1/2"

Condition: used, Year of construction: 1989, plate width:150 mm no. of straightening rolls:4 number of draw-in rolls:2 vorne+ 2 hinten roll diameter:60 mm Hfjdpfscxxvmjx Ah Dor dimensions of the machine ca.:1,8 x 0,7 x 1,4 m all rollers driven and individually adjustable, positioning via digital counter display, with 2 each introduction roller cages right and left

Condition: good (used), Hydraulic press, bending machine, straightening machine, profile straightening system, strip straightening machine, strip straightening device, shaft straightening system, combined bending machine-straightening press, profile bending machine, bending machine, flat iron bender, horizontal bending/straightening press, horizontal bending machine Hfedpfjvgu Hasx Ah Djr -Hydraulic press: Straightening system Straightening machine Profile straightening system with roller conveyor -Pressure force: 10 ton -Pressure: max 100 bar -Roller conveyors: 2x 1000/170/H1110 mm / rollers Ø 56 x 140 mm -Transport dimensions: 1335/1220//H1470 mm -Weight: 807 kg

Condition: new, functionality: fully functional, machine/vehicle number: FDM-150E/3000, operating speed: 7 mm/s, reverse speed: 9 mm/s, overall weight: 10,000 kg, total length: 2,750 mm, total width: 800 mm, total height: 3,100 mm, pressing force: 150 t, Equipment: documentation/manual, safety light barrier, HYDRAULIC PRESS FOR FOLDING. The double-column hydraulic press FDM-150E/3.000 belongs to the F series and is specially designed for folding operations. It utilizes an optimized hydraulic system with a pressure of 295 Bar, ensuring prolonged durability and reliability. It meets and satisfies all essential safety and health requirements according to CE regulations. STRUCTURE AND TABLES • Features a rigid fixed bench welded structure made exclusively from S355JR steel. • Stabilized and machined at the end of the welding process to ensure perfect parallelism and precision. • Calculated and designed using finite element software. • Includes upper and lower machined tables made from C45E steel with DIN-650 grooves. The upper table ensures perfect alignment with four cylindrical side guides of 80 mm diameter, equipped with maintenance-free anti-friction bimetallic bushings. • Lower grooved table measuring 3.100 mm x 600 mm. CYLINDER AND HYDRAULIC GROUP • Two double-acting main cylinders with chromed pistons and maintenance-free anti-wear guides. • Single-speed motorized hydraulic group. Includes cylinder decompression valve. • Glycerin manometer with tonnage reading. ELECTRICAL INSTALLATION AND SAFETY • Includes a SIEMENS mod. SIMATIC S7 1200 safety PLC and a 7” HMI touchscreen mod. KTP-700 CONFORT located in the electrical panel. Allows programming of operating modes in semi-automatic and automatic, power, stroke, and holding time. It has storage capacity for 300 recipes, where all the previous values can be programmed. • Operation is performed via a low-voltage electric pedal. • To ensure safety, it includes category IV photoelectric barriers located in the front work area, two fixed side guards, and a practicable rear guard with a magnetic disconnection detector. TECHNICAL SPECIFICATIONS Power tn 150 Engine Power cv 11 Piston Stroke mm 250 Working Speed mm/s 7 Return Speed mm/s 9 Maximum Pressure Bar 295 Front Light mm 3.200 Side Light mm 500 Useful Vertical Light (Free Distance Between Tables) mm 550 Working Height mm 950 Total Front mm 2.750 Total Side mm 800 Total Height mm 3.100 Hfedpfx Ajwpg D Ujh Der Weight kg 10.000

Year of construction: 2006, condition: used, Printing machine, embossing machine, stamping machine, rail stamping machine, embossing press, die cutter, pneumatic die cutter -Manufacturer: Stommel 6 Voos, embossing press, rail stamping machine on a solid base -Type: SV700/6/PE/EF -Band width: 13 mm, convertible -Individual components: see photos -Accessories: without other accessories Hsdpfxekyy Ufj Ah Djfr -Dimensions: 820/520/H1680 mm -Weight: approx. 154 kg