Used straightening-, and bending machines for sale (81)

Condition: like new (used), functionality: fully functional, power: 4 kW (5.44 HP), pressing force: 100 t, operating speed: 9 mm/s, reverse speed: 14 mm/s, table width: 2,545 mm, table length: 10,000 mm, table height: 900 mm, total length: 10,200 mm, total width: 3,660 mm, total height: 2,900 mm, overall weight: 26,000 kg, pressure: 320 bar, MOBILE HYDRAULIC GANTRY PRESS WITH MOVABLE HEAD AND 10-METER LONG TABLE FOR STRAIGHTENING WELDED STRUCTURES AND CUT PLATES TECHNICAL DATA Force T 100 Motor power kW 4 Motor ventilation switch power kW 0.37 Bridge travel motor power kW 0.75 Working speed mm/s 3 Approach speed mm/s 9.2 Return speed mm/s 14.4 Max. pressure Bar 320 Working area mm 10,000 x 2,545 Ram stroke max. mm 450 Maximum open height mm 600 Lateral travel mm 2,120 Gantry travel mm 9,140 Working height mm 900 Total length mm 10,200 Total width mm 3,660 Height mm 2,900 Weight kg 26,000 Lhedpfx Aswkvmnokfof The hydraulic press TL-100/10000E belongs to the T/NC series and has been specially developed for straightening welded structures and cut plates. As with all hydraulic presses in this series, its design facilitates the loading and unloading of large workpieces. Thanks to the lateral movement of the cylinder and the longitudinal travel of the bridge, access to various pressing points is possible without having to reposition the workpiece. The machine complies with all essential safety and health requirements in accordance with CE regulations. STRUCTURE AND TABLE • Electrically welded structure made exclusively from S355JR steel. • Stabilized and machined after welding to ensure perfect parallelism and precision. • Calculated and designed using finite element software. • Longitudinal bridge travel achieved by frequency inverter and toothed belt. • Motorized lateral head movement. CYLINDER AND HYDRAULIC UNIT • Double-acting cylinder with lapped sleeve, chrome-plated piston, and maintenance-free wear-resistant guides. • Fitted with a removable and exchangeable pad to prevent piston wear and machined at the end to match the tool. • Includes standard anti-rotation device for the cylinder and a calibrated front end with limit switches for stroke adjustment. • Motorized hydraulic unit with two speeds and automatic cut-off for rapid speed. • Cylinder decompression valve. • Pressure regulator. • Glycerin pressure gauge with tonnage indicator. ELECTRICAL INSTALLATION AND SAFETY • The control panel includes a selector switch for manual or semi-automatic operation. • Selector switch for choosing between rapid approach speed and slow working speed. • Operation via pendant control with emergency stop and low-voltage control. • Includes button to confirm a cycle.

Condition: new, Year of construction: 2025, machine/vehicle number: SH-250, functionality: fully functional, pressing force: 250 t, stroke length: 450 mm, operating speed: 4 mm/s, reverse speed: 8 mm/s, total length: 3,000 mm, total width: 2,000 mm, total height: 1,700 mm, Equipment: documentation/manual, MODEL: SH-250 STANDARD DESCRIPTION: Our SH series horizontal hydraulic ram press is engineered with a range of three different capacities, from 100 to 250 tons. These horizontal hydraulic presses are specifically designed for straightening and bending profiles, bars, and beams. The horizontal configuration enables easy handling of large-size beams and profiles. The latest-generation HS series offers versatile utility, with the possibility to fit a wide variety of tooling. They operate at a hydraulic pressure below 350 BAR to ensure greater durability of the entire hydraulic system. STRUCTURE AND TABLES The SH series horizontal straightening hydraulic presses feature an electro-welded "C"-frame structure made exclusively from S355JR steel. The frame is stabilized and machined after welding to ensure perfect parallelism and precision. Design and calculation are carried out using finite element software, thus maintaining our high standards of robustness, accuracy, and quality. They come equipped with a main anti-rotation push cylinder and a rear support table, both made from high-strength steel and machined with DIN 650 T-slots. Standard equipment includes C45E steel support blocks. Two adjustable side rollers are also included as standard, one on each side. CYLINDER AND HYDRAULIC UNIT Lhjdpfx Akswk Hkqjfsf Double-acting cylinder with honed sleeve, chrome-plated piston, and maintenance-free anti-wear guides. Cylinder is operated by a lever hydraulic distributor. It is fitted with a removable block to prevent piston damage. Single speed motor-driven hydraulic power unit. ELECTRICAL INSTALLATION AND SAFETY Electrical system includes a motor protection switch and emergency stop. Supplied with a glycerine-filled pressure gauge (tonnage readout) and hydraulic oil. Fully complies with all essential CE safety and health regulations. Supplied with an operation manual. OPTIONAL ACCESSORIES • Basic feed rails from 3,000 mm up to 12,000 mm, height adjustable. • Motorized feed rails from 3,000 mm up to 12,000 mm. • Hydraulic elevation and tilting of feed rails. • 415 mm folding device. PROMECAM clamping system. • Additional single-speed manual pump, allowing both manual and powered operation. • Low-voltage electric foot pedal control. • Precision limit switches with cylinder anti-rotation system and low-voltage electric foot pedal control. • Two-speed hydraulic power unit. • Geometry customized to your requirements.

Condition: as good as new (ex-display), Year of construction: 2025, Hydraulic horizontal bending and straightening press - Fabrikat Zopf - Model T 500 with straightening equipment - Multiprogramming of 99 programs each 16 steps - hydraulic pressure 50 to. - length of stroke 300 mm - bending speed adjustable - max. working speed 10 mm/sec. - return speed 20 mm/sec. - hydraulic pressure adjustable - maximum bending high 300 mm - motorcapacity 5,5 KW Lhodpsdk H A Iefx Akfsf - 400 V 50 hz 3 ph. - working height 900 mm - closed table - replaceable wear plate - weight 1300 kg - bending capacity: flat material max. 300x15 mm round tube 3/8" - 2 1/2"

Condition: new, Year of construction: 2025, Hydraulic horizontal bending and straightening press - Fabrikat Zopf - Model T 800 - Multiprogramming of 99 programs each 16 steps - hydraulic pressure 80 to. - length of stroke 300 mm - bending speed adjustable - max. working speed 10 mm/sec. - return speed 20 mm/sec. - hydraulic pressure adjustable Lhjdpfxod A Nc Ds Akfsf - maximum bending high 300 mm - motorcapacity 7,5 KW - 400 V 50 hz 3 ph. - working height 940 mm - closed table - replaceable wear plate - weight 2100 kg - bending capacity: flat material max. 300x32 mm at Vmax round tube 3/8" - 3" gas pipe

Condition: like new (used), Year of construction: 2018, machine/vehicle number: 201805015, functionality: fully functional, pressing force: 185 t, table length: 4,100 mm, total length: 3,560 mm, total width: 1,550 mm, total height: 2,850 mm, overall weight: 18,000 kg, feed length X-axis: 600 mm, feed length Y-axis: 300 mm, installation height: 500 mm, space requirement height: 3,440 mm, working length: 4,100 mm, Lightly used press brake in excellent condition. 185 tons, 4 meters, 6 axes No. 4 rear backgauges, No. 2 retractable pneumatic supports ESA 660W CNC LAG press brakes represent the perfect combination of Italian technological innovation, meticulous attention to detail and design, and the substantial production capabilities of China. These strengths, combined with the highest quality European components, allow LAG to offer its customers press brakes, shears, and inserting machines with the best price-to-performance ratio on the market. This is the top-of-the-line model, equipped with accessories and automation for highly profitable performance. Main standard configuration of the G-TOP press brake: - G-FLEX crowning compensation system - G-CS active crowning system - 6 axes (Y1-Y2-X-R-Z1-Z2) - Dual pump system: one main power pump and one pump dedicated to the crowning system - DSP AP safety system - Touchscreen control panel on the electrical cabinet Ledpfxswync Hj Akfehf - Sliding front supports - Touchscreen CNC control - Reference 4-axis rear backgauge system, model GRP-4 (X-R-Z1-Z2)

Condition: used, Year of construction: 1989, plate width:150 mm no. of straightening rolls:4 Ljdpfocxxvmex Akfohf number of draw-in rolls:2 vorne+ 2 hinten roll diameter:60 mm dimensions of the machine ca.:1,8 x 0,7 x 1,4 m all rollers driven and individually adjustable, positioning via digital counter display, with 2 each introduction roller cages right and left