Used turning automatic lathes for sale (187)

Condition: new, K’MX EVO with 7 axes has been designed for machining of parts from Ø 3 to Ø 32 mm. The highlight of this series is 2 oil-cooled electrospindles (built-in motor), with a power output of 10.5 kW on the main spindle. Hodpfsunr H Asx Aftjfl The stroke of the spindle is up to 400 mm. The two separate tools racks can simultaneously machining (ex roughing and finishing). The two separate tools racks can simultaneously machining (ex roughing and finishing). Optionally, both linear slides are equipped with driven tools to perform simultaneous drilling and milling. These 2 tools racks are complemented by end working attachment for internal operations with the possibility to turn simultaneously on the main and sub-spindle. In optional, possibility to mill thanks to ddriven tools. The large space permits better chip evacuation and maximum accessibility. - Rigid - Large working space - Up to 4 simultaneous cutting tools in contact - 2 independent racks with 5 positions

Condition: good (used), Year of construction: 2007, functionality: fully functional, machine/vehicle number: 0179 (033), turning length: 125 mm, spindle speed (max.): 7,000 rpm, turning diameter: 32 mm, clamping diameter: 32 mm, workpiece length (max.): 150 mm, The machine is supplied with tool holders and spare parts. TECHNICAL DETAILS Swing diameter over bed: 32 mm Spindle bore: 32 mm Turning length: 125 mm Hfedpfxjx U Tche Aftjl Control: YASKAWA SIEMENS 840 DI V2 Spindle speeds: 7000 rpm Workpiece length: max. 150 mm Clamping diameter: 32 mm Feed rate: 0 - 2000 mm/min MACHINE DETAILS Machine weight: approx. 5.7 t Space requirements: approx. 10.5 x 2 x 1.9 m Connection voltage: 200 V, 3 phases Frequency: 50 / 60 Hz Connected load: 8.0 kVA

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: K00446, turning length: 200 mm, spindle speed (max.): 15,000 rpm, controller model: Fanuc Series 31i, counter spindle speed (max.): 10,000 rpm, Equipment: bar feeder, TECHNICAL DETAILS Maximum bar diameter: 16 mm Maximum turning length: 200 mm Main spindle speed: 15,000 rpm Sub-spindle speed: 10,000 rpm Main spindle drive: 2.2 / 3.7 kW Hsdpfxeywu Eco Aftefl Sub-spindle drive: 0.55 / 1.1 kW Number of axes: X1, Y1, Z1, Z2, C1, C2 MACHINE DETAILS Control unit: Fanuc Series 31i Dimensions & Weight Dimensions (L x W x H): 1,850 x 1,610 x 1,050 mm Machine weight: 1,950 kg EQUIPMENT Fully functional C-axis on both spindles Bar feeder: IEMCA Genius 118 Type 37 LL Guide bushings (complete set) Fixed and driven tool holders High-pressure pump: 20 bar / 2 channels Comprehensive set of guide bushings Bushings for IEMCA bar loader in various diameters

Condition: ready for operation (used), Year of construction: 2001, functionality: fully functional, turning length: 205 mm, spindle speed (max.): 10,000 rpm, turning diameter: 20 mm, controller model: Cincom Mitsubishi Meldas, counter spindle speed (max.): 10,000 rpm, TECHNICAL DETAILS Bar diameter max.: 20 mm Turning length max.: 205 mm Main spindle speed max.: 10,000 rpm C-axis (main spindle): 0.001 degree Counter spindle speed max.: 10,000 rpm C-axis (counter spindle): 0.001 degree Tool capacity: 18 tools Axes: 7 MACHINE DETAILS Control: Cincom Mitsubishi Meldas Dimensions & Weight Machine dimensions (LxWxH): 2,540 x 1,450 x 1,850 mm Machine weight: 1,750 kg Bar feeder dimensions (LxWxH): 3,900 x 900 x 1,450 mm Bar feeder weight: 850 kg Hfjdpfx Afox U Afxstol EQUIPMENT Parts conveyor belt Bar feeder FMB Turbo 3-26

Condition: ready for operation (used), Year of construction: 2000, functionality: fully functional, machine/vehicle number: P10243, turning length: 200 mm, spindle speed (max.): 12,000 rpm, counter spindle speed (max.): 10,000 rpm, number of axes: 7, Equipment: bar feeder, TECHNICAL DETAILS Max. bar diameter: 12 mm Max. turning length: 200 mm Main spindle speed: 12,000 rpm Spindle power: 2.2 kW Counter spindle speed: 10,000 rpm Number of axes: 7 Hsdpsywu Abofx Aftofl MACHINE DETAILS Control: CNC Cincom / Mitsubishi M6 Machine weight: 2,580 kg EQUIPMENT C-axis LNS Express 332 bar feeder (year of manufacture 2009) Bushings for the LNS bar feeder in various diameters Guide bushings Driven tools: milling, drilling, thread cutting possible Set of fixed tool holders Large set of guide bushings (GB)

Condition: ready for operation (used), Year of construction: 2001, functionality: fully functional, turning length: 205 mm, spindle speed (max.): 10,000 rpm, turning diameter: 20 mm, controller model: Cincom Mitsubishi Meldas, counter spindle speed (max.): 10,000 rpm, TECHNICAL DETAILS Bar diameter max.: 20 mm Turning length max.: 205 mm Main spindle speed max.: 10,000 rpm C-axis (main spindle): 0.001 degree Counter spindle speed max.: 10,000 rpm C-axis (counter spindle): 0.001 degree Tool capacity: 18 tools Axes: 7 Hfedpfxsxp Ngcs Aftjl MACHINE DETAILS Control: Cincom Mitsubishi Meldas Dimensions & Weight Machine dimensions (LxWxH): 2,540 x 1,450 x 1,850 mm Machine weight: 1,750 kg Bar feeder dimensions (LxWxH): 3,900 x 900 x 1,450 mm Bar feeder weight: 850 kg EQUIPMENT Parts conveyor belt Bar feeder FMB Turbo 3-26

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, spindle speed (max.): 8,000 rpm, bar passage: 32 mm, controller model: Traub TX8i-S, number of slots in tool magazine: 12, Equipment: chip conveyor, TECHNICAL DETAILS Bar capacity: 26 / 32 mm Max. main spindle speed: 8,000 rpm Axes: X1 / Y1 / Z1, C-axis integrated in the main spindle Turret: 1 Hodpfx Aeyzxp Tsftjfl Tool stations: 12 Drive power: 6.7 kW (100% duty cycle) / 10.7 kW (40% duty cycle) Torque: 21 Nm (100% duty cycle) / 32 Nm (40% duty cycle) MACHINE DETAILS Power-on time: 116,721 h Operating hours: approx. 48,000 h Control: Traub TX8i-S DIMENSIONS & WEIGHT Dimensions (L × W × H): approx. 4.4 × 1.4 × 1.7 m Machine weight: approx. 4,000 – 4,200 kg EQUIPMENT Chip conveyor: hinged belt, discharge height approx. 950 mm

Condition: ready for operation (used), Year of construction: 1997, functionality: fully functional, turning length: 205 mm, spindle speed (max.): 10,000 rpm, turning diameter: 20 mm, controller model: Cincom Mitsubishi Meldas, counter spindle speed (max.): 10,000 rpm, TECHNICAL DETAILS Max. bar diameter: 20 mm Max. turning length: 205 mm Max. main spindle speed: 10,000 rpm Main spindle C-axis: 0.001 degrees Max. sub spindle speed: 10,000 rpm Sub spindle C-axis: 0.001 degrees Tool capacity: 18 tools Number of axes: 7 MACHINE DETAILS Control: Cincom Mitsubishi Meldas Hfsdpfx Aoxp Nd Uoftjl Dimensions & Weight Machine dimensions (LxWxH): 2,540 x 1,450 x 1,850 mm Machine weight: 1,750 kg Bar feeder dimensions (LxWxH): 3,900 x 900 x 1,450 mm Bar feeder weight: 850 kg EQUIPMENT Parts conveyor FMB Turbo 3-26 bar feeder

Condition: new, turning diameter over bed 400 mm turning diameter over slide rest 280 mm turning length 1000 mm turning speeds 70 - 2000 U/min centre height 195 mm spindle bore 54 mm tailstock quill taper MT 3 MK connected load frequency 400 V total power requirement 2,2 kW weight of the machine ca. 0.85 t dimensions of the machine ca. 1,95 x 1,0 x 1,75 m Professional industrial machine 3-axis digital display 3-jaw chuck 200 mm. 4-jaw chuck 200 mm. Hfsdpfx Afep U Ut Astol Faceplate 280mm Bezel fixed Bezel rotating 4-fold steel holder. Halogen machine light Machine light Foot brake removable chip tray, chip protection wall Hardened and ground bed rails Complete coolant system Feed protection Machine feet Machine tool

Condition: new, Year of construction: 2025, The machine on offer is a new stock machine. We will be happy to provide you with a suitable quotation. Hfsdpfx Aoychtpsftjl

Condition: new, turning diameter over bed 360 mm turning diameter over slide rest 220 mm turning length 1000 mm turning diameter in the gap 380 mm turning speeds 70 - 2000 U/min Hfjdpfx Aeupxucoftsl centre height 180 mm spindle bore 50 mm tailstock quill taper MT 3 MK connected load frequency 230 oder 400 V total power requirement 1,8 kW weight of the machine ca. 0.65 t dimensions of the machine ca. 2,0 x 0,8 x 1,56 m Professional industrial machine 3-axis digital display 3-jaw chuck 180 mm. 4-jaw chuck 200 mm. Faceplate 280mm Bezel fixed Bezel rotating 4-fold steel holder. Halogen machine light Machine light Foot brake removable chip tray, chip protection wall Hardened and ground bed rails Complete coolant system Feed protection Machine tools

Condition: new, Year of construction: 2023, A machine directly from the Hanwha authorized dealer HB TURNKEY (Hanwha Germany): Hanwha CNC turning center XD10 with Fanuc 0i series control (comparable to Star SR-10J) Hodjgq Ravopfx Aftofl MAIN SPINDLE - Maximum turning diameter: 10mm - Max. spindle bore diameter: 10mm - Maximum speed [rpm]: 15,000 - Maximum power [kW]: 3.7 BUILT-IN MOTOR - C-axis with 0.001° - Z1 travel [mm]: 155 - Synchronously rotating guide bushing unit - Type of guide bushing: SD125 R - Type of collet: 1212 E TAILSTOCK - Maximum speed [rpm]: 10,000 - Maximum power [kW]: 1.1 - C-axis with 0.001° - Maximum bar diameter [mm]: 10 - Max. part length, push-out in front: - Z2 travel [mm]: 180 - Type of collet: 1212E TOOLING OPTIONS Tool slide X1, Y1: - Tool holder plate for 5 external turning tools 8x8mm Cross drilling/milling unit: - Number: 4 driven drilling/milling spindles, ER11 - Power: [kW]: 0.55, S6000 - Front drilling attachment for 4 drill sleeves - ER11 REAR END PROCESSING - Tool carrier for 4 tools - 2 driven drilling/milling spindles ER11 modular - 2 fixed drilling/milling spindles ER11 modular AXES AND CONNECTED LOAD Number of servo axes: 6 Number of spindle axes: 2 Rapid traverse m/min: 32m/min (Z1, Z2, Y, X2); 24m/min (X1) Connected load [kW]: 12KVA CONTROL Control type: Hanwha Fanuc 0iTF series Number of axes: 6 (X1, Z1, Y1, Y2, X2, Z2, X2) Simultaneous 4-axis control External operating panel with handwheel 9.5" color LCD/MDI monitor Automatic power-off function Program verification function (test run possible via handwheel) Continuous thread cutting cycle Runtime display / part counter CF card interface Tool radius compensation Absolute reference point Self-diagnosis function Interface to bar feeder ACCESSORIES Leveling feet with leveling elements Part conveyor with collecting tray Toolbox and service tool set Work area light Signal lamp (3-color) Safety door switch with locking Maintenance and central lubrication unit (1.8 liters lubricant volume) Coolant flow monitoring Coolant tank 140 L Pneumatic blow-out device for tailstock collet Manual and documentation in German and English (Maintenance and operating manual incl. parameter list and test protocol) - READY FOR IMMEDIATE USE - We will gladly calculate and optimize the cycle time for you and set up your newly acquired machine in our facility. WE FIND A SOLUTION - Whether standard or HB-modified.