Used Turning automatic lathes for sale (257)

Condition: new, K’MX EVO with 7 axes has been designed for machining of parts from Ø 3 to Ø 32 mm. The highlight of this series is 2 oil-cooled electrospindles (built-in motor), with a power output of 10.5 kW on the main spindle. Ndsdsuq A D Rjpfx Aa Ijc The stroke of the spindle is up to 400 mm. The two separate tools racks can simultaneously machining (ex roughing and finishing). The two separate tools racks can simultaneously machining (ex roughing and finishing). Optionally, both linear slides are equipped with driven tools to perform simultaneous drilling and milling. These 2 tools racks are complemented by end working attachment for internal operations with the possibility to turn simultaneously on the main and sub-spindle. In optional, possibility to mill thanks to ddriven tools. The large space permits better chip evacuation and maximum accessibility. - Rigid - Large working space - Up to 4 simultaneous cutting tools in contact - 2 independent racks with 5 positions

Condition: used, Year of construction: 1995, turning diameter over bed 50 mm spindle passage 26 mm turning length 275 mm total power requirement 12 kW weight of the machine ca. 4500 kg CNC-Sliding Headstock Lathe, Opposite Headstock Njdpfot Hwp Tex Aa Iedc

Condition: used, Year of construction: 2003, Technical details: bar material dia.: 13 mm turning length: 205 mm turning speeds: 12.000 / 12.000 U/min number of tools: 29 driven tools: ja / yes 19 control: FANUC 16 iT total power requirement: 9 kVA weight of the machine ca.: 1,7 t dimensions of the machine ca.: 2,7 x 1,4 x 1,7 m CNC sliding headstock machine, subspindle,Year 2003 (0450) FANUC 16i-T control with 9 axes, 9 axes (X / C1 / Y / E / B / A / X / c2), Main spindle, speed max. 12,000 rpm, C-axis, Counter spindle with collet, speed max. 12,000 rpm, C-axis, 4-fold tool holder 3 transverse drilling apparatuses Revolver with 8 stations various additional tool holders, quills, Extinguishing system Kraft and Bauer High pressure system SF-Systeme Büchele /SHD 150/ 150bar / 2 x 40 um /3 valves, Parts conveyor belt Manuals Operation/Programming/Electrical/Spare Parts Operating tool machine Up to 29 turning tools and up to 19 attachments possible 9.0KVA Njdpfx Aaevivygo Isdc Tank capacity 170L Loading magazine FMB Turbo 2-16 /3200/A / from Ø2- Ø20 mm / Machine coolant use: Oil Dimensions machine: approx. 2700 x 1400 x 1700 [mm]. Weight machine: approx. 1700 [kg] Dimensions of loading magazine: approx. 4300 x 600 x 1800 [mm]. Weight of loading magazine: approx. 700 [kg]. Dimensions of peripheral HD system: approx. 1500 x 500 x 1000 [mm] Weight of HD system peripherals: approx. 250 [kg] Dimensions peripherals & accessories: approx. 1200 x 800 x 1000 [mm] Weight of peripherals & accessories: approx. 200 [kg] Dimensions of peripherals & accessories: approx. 1200 x 800 x 1000 [mm] Weight of peripherals & accessories: approx. 200 [kg] *

Condition: used, Year of construction: 2001, Technical details: spindle passage: 25 mm Article: CNC sliding headstock automatic lathe Manufacturer: Tornos Type: Deco 2000/20 Year of construction: 2001 Control: Fanuc spindle diameter: D25 mm max. speed: 7000 rpm comb: 2 (X,Z,Y-axis) Front attachment: 1 (X,Z,S-axis) Loading magazine: Tornos Robobar SSF Chip conveyor: Hinged belt conveyor other: various accessories such as polygonal impact device, HF spindle Please, contact us for getting more information and pictures on mail(at) or Ndodpfx Aastwglaj Isc *

Condition: as good as new (ex-display), Year of construction: 2024, operating hours: 10 h, functionality: fully functional, machine/vehicle number: 8046723D038, spindle motor power: 11,000 W, turning diameter over cross slide: 380 mm, spindle speed (max.): 3,000 rpm, overall weight: 2,000 kg, type of input current: three-phase, total width: 1,800 mm, total length: 2,500 mm, total height: 1,800 mm, torque: 373 Nm, Equipment: documentation/manual, CNC LATHE STYLE 350 [850 dbc] - main spindle motor power 11kW - main spindle bore Ø54 mm, 3,000 rpm - manual universal with 3 jaws D200mm - VDI30 turret with 8 positions - Coolant gun, including high-pressure pump Nedevvwblepfx Aa Ijdc - Work area lighting (LED) - Cooling system - Automatic lubrication - Ball screw protection - Full fairing with sliding doors - Speed potentiometer - Coolant control button - Handwheel - Remote support on machine – allows remote diagnostics

Condition: ready for operation (used), Year of construction: 2005, Control Unit Nedpfx Aaowkapgs Ijdc Brand FANUC Model Series 18i-TB Additional Equipment Bar Feeder: Model: FMB MINIMAG 3200/A / Bar Length Capacity: Up to 3200 mm This 6-axis STAR MICRONICS SB-16 was manufactured in 2005, featuring a FANUC 18i-TB control unit, a maximum machining diameter of 18 mm, and a length per chucking of 200 mm. It boasts a main spindle speed up to 10000 rpm and dual spindle motor power of 2.2/3.7 kW. If you are looking to get high-quality turning capabilities, consider the STAR MICRONICS SB-16 machine we have for sale. Contact us for more information. Application Types Turning

Year of construction: 2004, condition: excellent (used), Swiss type lathes MANURHIN K'MX overhauled with : – Spindle, counter spindle, geometry and changes of all non-conforming parts. Rotating tool on: rear comb, front comb, end unit, radial and axial counter operation C-axis on: main spindle and counter spindle Ndodsir Id Uspfx Aa Isc Rigid tapping on: main spindle and backworking spindle High-pressure Predispo Year of construction 2004 – approx. 22 000 h

Condition: good (used), Year of construction: 2000, Traub TNL12/7 Spindle passage 12.7mm Turning length 130mm Main spindle 4kW; oś C 0.001 grad; 12.000 rpm Revolver 1 - axis X1 Y1, 6 tools, driven tools 1.5kW Revolver 2 - axis X1 Z2, 6 tools, driven tools 1.5kW Subspindle 2.5kW; axis C 0.001 grad; 12.000 rpm Frontaparat - axis Z3; Z4/X3, driven tools Backparat - axis X4, driven tools 1.5kW Barfeeder FMB Minimag For sale 2 machines, a lot of accesories and toolholders. Machines under power, in production. 1. TNL12/7 s/n: 248 b/y: 2000, (7 linear axes X1, Z1, Y1, X2, Z2, X3, Z3 +2x C axis) + FMB Minimag + Knoll swarf conveyor Nedpfx Aepuilvoa Iodc 2. TNL12/7 s/n: 277 b/y: 2000, full option (9 linear axes X1, Z1, Y1, X2, Z2, X3, Z3 X4, Z4 +2xoś C axis) + IEMCA Genius + Knoll swarf conveyor

Condition: used, Year of construction: 2012, Technical details: turning diameter over bed: 20 mm spindle passage: 3-20 mm turning length: 250 mm control: FANUC 31 i-A Ndedpfx Asvivx Nsa Iec main-spindle speed: 10.000 1/min subspindle speed: 10.000 1/min Main spindle capacity: 3,7 kW subspindle power: 2,2 kW number of tools: 35 weight of the machine ca.: 3,3 t dimensions of the machine ca.: 2,11 x 1,2 x 1,89 m CNC sliding headstock turning/milling centre with B-axis Control system: Fanuc 31i-A Machining length: max. 250 mm Number of controlled axes: 7 axes and max. 5 axes simultaneously B-axis: 0°-130° freely programmable Rod passage: Ø 3 mm to max. Ø 20 mm Drive power main spindle: 3.7 kW Drive power counter spindle: 2.2 kW Main spindle speed: 10,000 rpm Counter spindle speed: 10,000 rpm C-axis: Main and counter spindle Number of linear supports: 2 pieces Total number of tools: 35 pieces Dimensions (LxWxH) in mm: 2,110×1,200×1,885 Weight: 3,300 kg Conversion from long to short turning Deep hole drilling stations NAKANISHI high-speed spindle Rear slide with Y-axis Cross drilling rear side Chip conveyor Fire extinguishing system FMB bar loader Minimag 20, year 2012 Approx. 7.200 working hours *

Condition: good (used), Year of construction: 2010, functionality: fully functional, CNC lathe GILDEMEISTER DMG MSL 60/7 Year of manufacture: 2010 CNC control: SIEMENS 840 D Powerline Technical Details Spindle bore: 65 mm Max. spindle speed: 5,000 rpm Bar capacity: 60 mm C-axis: available Sub-spindle: 5,000 rpm Total weight: 3,500 kg EQUIPMENT - Bar feeder type IEMCA Master 880/33 HF - KSS coolant unit - Hinge belt chip conveyor Ndedpfxswu T Dfs Aa Ioc

Condition: good (used), Year of construction: 2013, Manufacturer: STAR Type: SV-32 Year of manufacture: 2013 with FANUC 16i-TB control, turret, synchronized spindle, driven tools, C-axis, parts conveyor, fire extinguishing system, chip conveyor, bar feeder magazine FMB TURBO 3-36. Ndedovffccjpfx Aa Isc

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, Machine equipped with Nakanishi tools for the dental sector that has always operated in oil – fire prevention system – Iemca Boss 338HD/32, new in 2015 – well tooled – Fanuc 32i-B Control. Njdpow Ibpnsfx Aa Ijdc

Condition: like new (used), Year of construction: 2022, operating hours: 13,116 h, Max. bar capacity mm: 20 Max. Z-axis travel (sliding headstock/fixed headstock) mm: 205 / 80 Max. spindle speed rpm: 10,000 Drive power 100%/40% duty cycle kW: 3.0 / 5.5 Torque 100%/40% duty cycle Nm: 5.73 / 10.5 / max. 17.2 C-axis resolution degrees: 0.001 Max. rapid traverse Z m/min: 20 Tool stations: 8 Driven tools: 8 Max. tool speed rpm: 12,000 / 8,000 Tool holder diameter mm: 45 Drive power 100%/40% duty cycle kW: 1.0 / 2.0 Turning tool cross-section mm: 16x16 / 20x20 Slide travel X mm: 120 / 165 Slide travel Y mm: ±25.4 Slide travel Z mm: 254 / 567.5 Rapid traverse X/Y/Z m/min: 20 / 20 / 40 B-axis swivel angle degrees: 105 Lower turret: Tool stations: 8 Driven tools: 8 Max. tool speed rpm: 12,000 Tool holder diameter mm: 45 Drive power 100%/40% duty cycle kW: 1.0 / 2.0 Nsdpewuddvsfx Aa Isdc Turning tool cross-section mm: 16x16 / 20x20 Slide travel X mm: 120 Slide travel Y mm: ±25.4 Slide travel Z mm: 155 Rapid traverse X/Y/Z m/min: 20 / 20 / 40 Back working device: Tool stations: 4 Slide travel X/Y/Z mm: 120 / ±25.4 / 155 Tool holder diameter mm: 25 Sub spindle: Max. spindle bore mm: 20 Max. spindle speed rpm: 10,000 Drive power 100%/40% duty cycle kW: 3.0 / 5.5 Torque 100%/40% duty cycle Nm: 5.73 / 10.5 / max. 17.2 Slide travel X mm: 235.5 Slide travel Z mm: 258 C-axis resolution degrees: 0.001 Rapid traverse X/Z m/min: 20 / 40 Coolant system basic unit: Pump pressure bar: 3 / 8 Tank capacity l: 250 Flow rate at 3 / 8 bar l/min: 80 / 120 Filtration degree µm: 200 Machine dimensions Length x width x height mm: see installation plan* Weight kg: 5,000* Connected load kW: 40 (47 kVA)

Condition: ready for operation (used), Year of construction: 2002, functionality: fully functional, machine/vehicle number: 211S, rotational speed (max.): 3,000 rpm, bar diameter (max.): 65 mm, collet bore: 150 mm, TECHNICAL DETAILS Max. bar capacity: 65 mm Front spindle bearing diameter: 110/150 mm Collet clamping system up to Ø: 60 mm HAINBUCH collet system up to Ø: 65 mm Maximum spindle speed: 3,000 rpm Main spindle motor power: 11/15 kW Main Spindle Number of tools: 8 VDI-30 Maximum working stroke in Z: 50 mm Rapid traverse speed: 15 m/min Feed force: 6,790 N Cross Slide Number of horizontal slides: 2 Maximum working stroke at X1/X2: 70 mm Feed force at X1/X2: 8,000 at 50 bar Maximum working stroke on Z1: 230 mm Turret Number of tools: 8 VDI-20 Vertical Slide Number of vertical slides: 2 Maximum working stroke at X3/X4: 70 mm Manual length adjustment: 50 mm Rapid traverse speed: 15 m/min Feed force at X1/X2: 8,000 at 50 bar MACHINE DETAILS Machine height: 1,700 mm Footprint: 2,900 x 1,700 mm Nodpfxowtq U Es Aa Isdc Machine weight: 4,100 kg Voltage: 380 V Frequency: 50 Hz Power: 22 kVA

Condition: ready for operation (used), Year of construction: 2016, operating hours: 46,976 h, Control Unit Brand FANUC Nsdpfx Aaewvmr Ej Iodc Model Series Oi-TD Additional Equipment Transformer 8 KVA / Airblow through the spindle / LNS chip conveyor / Interface for high pressure coolant system with 4 M-codes This Citizen Miyano GN-3200 was manufactured in 2016. It features a Fanuc 0i-TD control, an 8 KVA transformer, MAS quick change toolholders, and a collet chuck device. Additional features include an airblow through the spindle, a tool breakage sensor, a Blum measuring probe, and an LNS chip conveyor. Interface for high-pressure coolant system with 4 M-codes also included. Contact us for more information about this machine. Application Types Turning

Condition: not inspected (used), Year of construction: 2021, functionality: unexamined, Star SR-32J sliding head CNC lathes - 4 available - see descriptions below Star SR-32J sliding head CNC lathe Serial no: 3174 (09/2015) with Fanuc Series 32i-Model B control, Filtermist extraction, swarf conveyor and chip hopper Hydrajet GP20-2000 high pressure coolant system Serial no: 698 (07/2016) FMB Turbo 3-36/4200/A bar feed Serial no: 48-260915 / R:686664 (2008) Star SR-32J II type B sliding head CNC lathe Serial no: 0468 (06/2019) with Fanuc Series 32i-Model B control, Filtermist extraction, swarf conveyor and chip hopper Hydrajet GP20-2000-5F high pressure coolant system FMB Turbo 3-36/4200/A bar feed Serial no: 69-264247 / R:1714070 (2019) Star SR-32J II type B sliding head CNC lathe Serial no: 0700 (12/2020) with Fanuc Series 32i-Model B CNC control, Filtermist extraction Ndjdewxb Adopfx Aa Iec Hydrajet UB20-2000-6TF high pressure coolant system Serial no: 1461 (2021) FMB Turbo 3-36/4200/A bar feed Serial no: 61-264515 / R:1824023 (2021) Star SR-32J II type A sliding head CNC lathe Serial no: 0714 (02/2021) with Fanuc Series 32i-Model B CNC control, Filtermist extraction, swarf conveyor and chip hopper Hydrajet UB20-2000-5F high pressure coolant system Serial no: 1490 (04/2021) FMB Turbo 3-36/4200/A bar feed Serial no: 61-264572 / R:1843360 (2021)

Condition: like new (used), Year of construction: 2018, functionality: fully functional, turning diameter: 20 mm, overall weight: 2,350 kg, For sale Citizen L20E-2M12 lathe with 3 meter bar feeder. Ndjdpfxovdyi Uj Aa Ioc

Condition: good (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: XD20BB0393, turning length: 210 mm, spindle speed (max.): 10,000 rpm, turning diameter: 20 mm, equipped with Iemca Boss 332E-r/32 barfeed new in 2008 with 12 mm guide channels - chip conveyor - Fanuc 18i-TB Control Ndsdpfor Arwujx Aa Isc

Condition: used, Year of construction: 1983, functionality: limited functionality, turning diameter over cross slide: 160 mm, turning length: 800 mm, spindle bore: 60 mm, travel distance X-axis: 205 mm, travel distance Z-axis: 810 mm, rapid traverse Z-axis: 10,000 m/min, rotational speed (max.): 3,150 rpm, total height: 1,800 mm, total length: 1,800 mm, total width: 3,300 mm, swing diameter over cross slide: 160 mm, turning diameter over bed slide: 360 mm, overall weight: 3,100 kg, Technical details: TRAUB TND 360 (1983) Rotation diameter over bed: 360 mm Rotation diameter over cross slide: 160 mm Turning length: 800 mm Longitudinal stroke (z axis): 810 mm Axial stroke (x axis): 205 mm Control: TX-8 Spindle clearance: 60 mm Speed: 63 - 3150 / 2 steps rev. Feed:: 10,000 mm/min. Turret head - number of stations: 8 Tailstock holder ISO: SK30 DIN 2080 Tailstock quill stroke: 105 mm Working pressure: 40 bar Total power requirement: 38 kW Machine weight approx.: 3.1 tons Ndedpfx Aaowm Dhxj Ijc Machine dimensions approx. L x W x H: 1.8 x 3.3 x 1.8 m Hydraulic system dimensions: 580 x 400 x 750 mm Equipment Lathe chuck Ø 200 mm (without jaws), hydraulic

Condition: ready for operation (used), Year of construction: 2005, operating hours: 56,729 h, functionality: fully functional, spindle speed (max.): 10,000 rpm, bar diameter (max.): 20 mm, No minimum price – guaranteed sale to the highest bid! TECHNICAL DETAILS Max. spindle speed: 10,000 rpm Number of spindles: 2 Bar through-hole: 20 mm Driven tools: yes Main spindle speed range up to: 10,000 /min Counter spindle speed range up to: 8,000 /min Cross-slide speed range up to: 4,500 /min Njdpjwqgwdsfx Aa Isdc MACHINE DETAILS Total weight: 2,150 kg Total height: 2,000 mm Required space length: 3,000 mm Required space width: 1,400 mm Connection voltage: 400 V Mains frequency: 50 Hz Operating hours: approx. 56,729 h EQUIPMENT - CNC control CINCOM M7 - Bar loader LNS Hydrobar Express 220 - Fire extinguishing system

Condition: ready for operation (used), Year of construction: 2007, Main Drive Number of axis 7 Additional Equipment Iemca 332 loader High pressure pump Ndedpfx Aaowkarhe Iec Chip evacuator This 7-axis Citizen Cincom K16 VII was manufactured in 2007. It features a motorized system, an Iemca 332 loader, a high-pressure pump, and a chip evacuator, making it ideal for intricate Swiss-type turning operations. Consider the opportunity to buy this Citizen Cincom K16 VII Swiss type turning machine. Contact us for more information about this machine. Application Types Turning

Condition: good (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: SL-35-BB-1157, overall weight: 3,750 kg, rotational speed (max.): 8,000 rpm, bar passage: 35 mm, working length: 220 mm, power: 55 kW (74.78 HP), equipped with Iemca Boss 332E-r/32 new in 2007 - Fanuc 18i-TB control - chip conveyor - machinery still in production will arrive in our stock at the end of January. Nedpfx Asvnl Ikea Isdc

Condition: repair required (used), Year of construction: 2003, functionality: limited functionality, rotational speed (max.): 10,000 rpm, bar passage: 16 mm, No minimum price – guaranteed sale to the highest bid! Defective: X 2 amplifiers TECHNICAL DETAILS   Spindle speed: 10,000 rpm   Bar through-hole: 16 mm   Number of spindles: 2     Control: CNC control CINCON M6C   MACHINE DETAILS   Total weight: 1,750 kg   Total height: 2,200 mm   Required space length: 3,300 mm   Required space width: 1,500 mm   Connection voltage: 400 V   Mains frequency: 50 Hz   Nodpfxewqgv Te Aa Iedc EQUIPMENT   - Driven tools  - Bar feeder - Siemens fire extinguisher - Tool breakage detector   - HSP drill holder Sale without bar loader

Condition: used, Year of construction: 2015, functionality: fully functional, machine/vehicle number: QF5124, turning length: 200 mm, spindle speed (max.): 10,000 rpm, overall weight: 2,350 kg, bar passage: 20 mm, power: 3.7 kW (5.03 HP), Type L20E-2M8 - Cincom System M70LPC-VU - LNS Express 220-S2 new in 2016 - machine has always operated with oil. Nedswydmhepfx Aa Ijdc

Condition: used, Year of construction: 2010, functionality: fully functional, machine/vehicle number: XD-38-BE-0175, turning length: 310 mm, spindle speed (max.): 8,000 rpm, overall weight: 4,050 kg, bar passage: 38 mm, Siemens 840D control - Iemca Boss 545E-r/32 bar feeder - Nanocool CIL750 A-CT oil cooler - machine has operated with oil Nedpfx Aowydiisa Isdc