Condition: ready for operation (used), Year of construction: 1996, pressing force: 70 t, Main Drive Pressing force 686 Kn Gsdpfxex D D Nns Ah Hsil This OTT ST 1611/60 veneer press was manufactured in 1996. It features a maximum pressing force of 70 tons, pressing plates measuring 1300x1611 mm, and a power output of 10.1 kW. The plates are electrically heated, enhancing its efficiency. Consider the opportunity to buy this OTT ST 1611/60 veneer press. Contact us for more information. Application Types Pressing / Laminating

Condition: good (used), Code: 0265 Brand: CASATI Model: TM 3100 - CE Standard Automatic mechanical veneer pack guillotine shear with 1 blade - CE Standard Technical data: Cutting length mm 3050 Cutting height mm 45 Automatic shift register Tilting square for cross cuts Full rear register protection Safety photocells Max rear feed width mm 520 Gjdsx H Thnspfx Ah Heil Min rear feed width mm 25 Millimeter counter to read the working cutting Reducer motor Hp 1,5 Power Kw 2 Overall dimensions mm 4100 x 1300 x 1500 h Weight kg 1700

Condition: used, Veneer Press OTT JU 90 -used- ----- Technical Specifications ----- Pressing area: 2,550 x 1,350 mm, Power per heating plate: 9100 W, Number of cylinders: 4 Giodpfswmmrajx Ah Hsl

Condition: good (used), pressing force: 95 t, cylinder diameter: 90 mm, plate width: 1,350 mm, Veneer press Joos Type: HP 90 with 2 intermediate plates, stacking automaton and scissor lift table Pressing area: 2,550 x 1,350 mm Working surfaces: 3 pcs. Intermediate plates: 2 pcs. Pressing force: 95 t Piston diameter: 90 mm Specific pressing pressure: 2.75 kg/cm³ Number of cylinders: 4 Heating medium: hot water Total power: 1.3 kW Safety device: emergency cord Gisdpoxnqq Hofx Ah Hjl Dimensions of the press: 3,000 x 1,530 x 2,200 mm Weight of the press: approx. 4 t Elkom heating plates in very good condition Scissor lift table The plates are automatically stacked and thus discharged.

Condition: used, Year of construction: 1995, Used Machine Year of manufacture: 1995 Features and technical data: - Total pressing force: 70 t - Press area: 2500x1300 mm - With gold anodized plates in good condition - Press chamber height: 400 mm - 4 cylinders, diameter 80 mm - ABS safety system, can be deactivated - Emergency cord - Extendable support, left side - Swivel button operation - Hydraulic unit at the bottom - Cleaned and assembled/pressed by ELKOM staff Dimensions: 2900 x 1480 x 2050 mm Weight: 2950 kg Availability: short-term Storage location: 63934 Röllbach Gjdpfx Ahsx Enr So Hsil

Condition: used, Kuper Type FW/Mini veneer splicing machine for precise gluing and splicing of veneer sheets using glue threads. Ideal for smaller operations or flexible applications in the production of high-quality veneer surfaces. Includes a supply of glue threads. Stand throat: 420 mm feed: approx. 6 m/min Gedpswrfbdefx Ah Heil

Condition: good (used), Year of construction: 1961, functionality: fully functional, Width: 1.400 mm To be dismantled by buyer Gedovc Dbfepfx Ah Hsil

Condition: good (used), Code: 0263 Brand: MONGUZZI Model: TRC - MP 4200 - CE Standard Automatic hydraulic veneer guillotine with 1 blade - CE Standard Godpfx Ahsx Hfr Se Hoil Technical data: Sturdy base structure Large heavy presser for ideal clamping of all types of veneer High-quality steel blade with high wear resistance Can be operated in both automatic and manual modes Hydraulic control unit Second control panel for end trimming Automatic rear register with electronic programmer 1500 mm Cutting length 4300 mm Max register depth 1500 mm Min register depth 25 mm Useful presser opening 80 mm Presser width 360 mm Cutting time 4 sec Safety photocell barriers Power 10 Kw Work surface height 910 mm Overall dimensions : machine mm 5700 x 1300 x 1800 h - Rear register mm 3500 x 2000 x 300 h Weight kg 6500

Condition: excellent (used), Year of construction: 2001, Veneer Saw Mayer FH2-3520, Precision Cutting Saw with Jointing Unit (Planing Unit) and Veneer Stop Table Robust machine construction by Mayer A video of the machine in operation can be provided upon request. Giodpfxox Hqtzj Ah Hol For tear-free and gap-tight cutting of veneer, including thick-cut veneer Max. cutting length: 3,500 mm Saw unit and jointing unit are combined in one assembly, so only one unit needs to be moved. Easy-to-operate saw unit running on linear guides. Rear support table with through-finger stop, adjustable from approx. 2 – 62 cm, with pneumatic clamping and digital display Pneumatic workpiece clamping Saw drive motor: 1.8 kW, milling unit: 1.2 kW Motors can conveniently be switched on at the handle, so they only run when needed. Fine-cut blade equipped with carbide teeth, sharpened Planer head Z4, fitted with new carbide indexable inserts, including spare blades Practical front veneer storage, extendable for the planing unit 100 mm extraction connection with extraction duct CE certification Operating manual On-board tools Original paintwork, only a few areas touched up Dimensions approx. 5,050 x 1,700 x 1,400 mm (L x W x H). Weight approx. 900 kg. The machine can be demonstrated at our location by appointment. We only offer machines that are ready for demonstration in our warehouse; see 'other offers from this supplier.'

Condition: good (used), overall weight: 5,000 kg, working width: 1,300 mm, plate width: 1,350 mm, Veneer Press Bürkle U140 Working surfaces: 5 pcs. Intermediate plates: 4 pcs. Plate dimensions: 3050 x 1350 mm Working dimensions: 3000 x 1300 mm 8 hydraulic cylinders Max. surface pressure: 5 kp/cm2 Max. operating pressure: 348 bar Heating medium – hot water from central heating Cooling – cooling circuit with WILO pump, expansion tank, piping Weight approx. 5000 kg Good technical condition of plates and hydraulics Gijdpfoxn Um Eex Ah Hol

Condition: used, Year of construction: 1985, Used machine Year of manufacture: 1991 Plate size: 2200 x 1100 mm Equipped with Busse aluminium energy-saving plates (the spots visible in the pictures are only visual; the plates are in perfect condition) Godsx Enp Repfx Ah Hoil Total press capacity: 80 t Press cylinders: 4 x 90 mm Opening width: 400 mm Weight: approx. 3100 kg Total length: 2610 mm Total width: 1240 mm Total height: 1890 mm Motor power rating: 1.1 kW Connection per electric heating plate: approx. 6.6 kW Availability: short notice Storage location: Röllbach

Condition: ready for operation (used), Year of construction: 1996, Main Drive Pressing force 135 Kn This OTT 300-K-D0 was manufactured in 1996. A robust veneer press featuring plate dimensions of 2550 x 1350 mm and hot water heating. It includes 6 pressure cylinders with a total pressing force of 135 tons. Consider the opportunity to buy this OTT 300-K-D0 veneer press. Contact us for more information about this machine. Giedpjx D E Avefx Ah Hol Application Types Pressing / Laminating

Condition: good (used), Year of construction: 1988, functionality: fully functional, Clipper Babcock BSH - STC 28 - 1988 Godpfxjt D Dg To Ah Hjil To be disassembled by the buyer

Condition: used, Year of construction: 1966, functionality: fully functional, machine/vehicle number: 0371, Veneer splicing machine Manufacturer: Kuper Type: FW 100 Machine No: 0371 Year of manufacture: 1966 Stand projection: 1150 mm Throughput speed: approx. 10 - 30 m min. Drive: brake motor 0.55 kW 380 V, optionally 220 V three-phase current Total connected load: 1.8 kW Heating: 7 V 120 W Weight: 630 kg Space required: 2300 / 800 mm Box dimensions: 2450 / 1450 / 900 mm Gjdovk U Thepfx Ah Heil Ship space: 3.2 m³

Condition: excellent (used), Year of construction: 2011, operating hours: 216 h, functionality: fully functional, machine/vehicle number: 20MS090000/007, total length: 3,000 mm, type of input current: AC, total width: 2,500 mm, total height: 1,900 mm, overall weight: 1,450 kg, empty load weight: 1,450 kg, working width: 900 mm, compressed air connection: 6 bar, throughput speed: 50 mm/s, Gluing and longitudinal splicing machine For 0.4 to 3 mm thickness with direct gluing. With pre-gluing of edges up to 5 mm. Machine used very little, available ex location. Features: - Separate electric motors for chain and glue application - Glue is applied to the edge of the newly inserted veneer strip, increasing the strength of the glued joint - Robust, durable stainless steel conveyor chain with weighing joints - Separate temperature, speed, and pressure adjustment - Quick and easily accessible glue reservoir for fast and simple refilling or cleaning - Multiple heating zones for individual temperature adjustment - Extended service life of glue reservoir due to integrated cooling unit - Infinitely variable feed speed INCLUDES GLUE COOLER Godpfxjw E Rfbe Ah Hsil Technical specifications: Throat depth: 900 mm Minimum veneer strip width: 45 mm Minimum veneer strip length: 300 mm Veneer strip thickness: 0.4 – 3.0 mm (up to 5 mm) Veneer moisture content: max. 8 – 12 % Working height: 900 mm Feed speed: 5 – 50 m/min Heating section length: 1000 mm Maximum heating temperature: 250°C Electrical connection: 9.0 kW, 400 V, 50 Hz Compressed air: 6.0 bar Dimensions (L x W x H): 2400 x 2300 x 1900 mm Weight: 1500 kg

Condition: used, Veneer Press BÜRKLE U 80 - used - Emergency stop cable, Control via push button ----- Technical Data ----- Pressing area: 2,550 x 1,300 mm Gijdexfg A Hepfx Ah Hol Power per heating plate: 9,100 W Max. opening height: 4,000 mm Number of cylinders: 6 pcs. Dimensions (LxWxH): 3,150 x 1,450 x 1,785 mm Weight: 3,700 kg

Condition: used, Year of construction: 1982, Used machine Condition: good Equipment and technical details: Cutting length mm: 3,100 Cutting height mm: 45 Saw blade diameter mm: 180 Depth to stop mm: 500 Gjdpfew I Ulpjx Ah Hjil Main motor kW: 1.8 Pneumatic clamps Rear stop Weight approx. kg: 400 Location: Flörsheim Availability: short notice

Condition: good (used), cutting length (max.): 3,600 mm, overall weight: 4,000 kg, Cutting length (max.) 3600 mm Gjdpjwv Eiisfx Ah Hjil

Condition: used, Year of construction: 1984, total width: 1,500 mm, total length: 3,000 mm, total height: 2,000 mm, Empty weight: 2.500 kg Gijdpfxexhcg Ts Ah Hjl - Year: 1984 - Documentation available: No - CE certificate present: No - Max. workpiece length [mm]: 2500 - Max. workpiece width [mm]: 1300 - Max. workpiece height [mm]: 300 - Number of work zones [pcs]: 1 - Number of cylinders [pcs]: 4 - Cylinder diameter [mm]: 70 - Transport dimensions: 3000mm x 1500mm x 2000mm (l x w x h) - Transport weight [kg]: 2500kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of construction: 1995, Used machine Year of manufacture: 1995 Equipment and technical data: Working length: 3000 mm Handwheel clamping Unit: 2 kW Availability: Short-term Location: Flörsheim Gijdpfowi Adkjx Ah Hsl

Condition: used, total width: 3,960 mm, total length: 1,600 mm, total height: 2,300 mm, Empty weight: 5.000 kg Price: On request - Documentation available: No - CE certificate present: No - Max. workpiece length [mm]: 1300 - Max. workpiece width [mm]: 3300 - Number of cylinders [pcs]: 6 - Transport dimensions: 1600mm x 3960mm x 2300mm (l x w x h) Gisdpfx Ahewnhulj Hjl - Transport weight [kg]: 5000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Used machine Veneer splicing machine Machine number: 1262050 Motor power: 2.5 HP Godpfowka I Nsx Ah Hoil Motor speed: 2,810 rpm Cutting length: 3,100 mm Saw blade diameter: 180 mm Rear support plate missing Movable Transport dimensions approx. 3,700 × 700 × 1,450 mm Weight approx. 200 kg Availability: short notice Location: Solingen

Condition: used, Year of construction: 1991, High frequency press Brand: Italpresse Type: GB/13 Max pressure: 120T Pressing area 2500x1300mm Pressing height 200mm 6 cylinders diameter 90mm Speed 12m/min. Complete line with loading system, gluing machine, destacker and High frequency cabinet (separate for sale) Gijdpfxewng Tme Ah Hsl Machine needs some maintenance. Probably the PLC lost his parameters, and some small parts needs to be changed.  - Year: 1991 - Documentation available: No - CE certificate present: No Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Used machine Gjdpjw I U Evefx Ah Hsil Condition: Fully functional Technical data: Working length: 3000 mm Handwheel clamping Power unit: 2 kW Availability: Short term Location: Flörsheim

Condition: used, Year of construction: 1993, Used machine Year of manufacture: 1993 Tabletop machine Gjdpfx Aow I Ur Njh Hsil The zig-zag thread used as the adhesive medium is applied from below Automatic thickness and tolerance compensation for measured veneers Veneer from approx. 120 mm length, 35 mm width and a thickness of 0.3 - 2 mm Electrical connection: 230 V Throat depth: 700 mm Material feed approx. 6 m/min. Weight: approx. 54 kg Availability: short-term Storage location: Flörsheim