Condition: ready for operation (used), Year of construction: 1998, Additional Equipment Motorized infeed table with PVC belt Motorized loading table for manual assembly of the panels and automatic loading into the press on the 3500 mm side Pgjdewzn D Hopfx Ab Iow Heating plates made of solid steel, drilled and machined on all sides Automatic loading and unloading of the panels on the 3500 mm side This ITALPRESSE DS 130 was manufactured in 1998. A robust veneer press featuring a motorized infeed table with a PVC belt and an automatic loading system for efficient panel handling. It boasts a maximum total lifting force of 110 tons and a heating plate size of 3500 x 1400 mm. Ideal for high-quality veneering processes. Contact us for more information about this machine. Application Types Pressing / Laminating

Condition: excellent (used), Year of construction: 1999, Proven veneer splicing machine, veneer stitching machine by Kuper FW/M 630 T Throat depth: 630 mm Power connection: 230V Foot pedal control 1 spool of glue thread Threader Separator Pgodpfx Absq Umw Ee Isw The machine is set up and ready to use immediately. CE marking Operating manual The machine can be demonstrated on site by appointment. We only offer machines that are demonstration-ready in our warehouse; see also 'more offers from this supplier.'

Condition: excellent (used), Peeler Raute 2hv57-66 Technical condition: very good, after a thorough service Technical data: Pjdpfx Aovxq Ikjb Iogw - Max. log diameter: 130 cm - Maximum peeling length: 1450 mm

Condition: used, No. 04473 Veneer saw Scheer FM 8 - 3100 Used Jointing and fine-cutting machine for joint-tight and splinter-free sawing of veneer, chipboard, blockboard or solid wood Strip cuts are very easy to make Rear table is approx. 470 mm wide The clamping beam is operated pneumatically The saw unit is guided by hand Pgsdpfxow A Actj Ab Iew Cutting length 3100 mm Cutting height max. 45 mm Motor 1.8 kW Transport dimensions approx. 3800 x 1100 x 1400 mm LWH Weight approx. 400 kg To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical information, description of condition, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Terms of payment: Prices excl. VAT, payment before collection or dispatch Terms of delivery: ex warehouse

Condition: new, Year of construction: 2024, FULL AUTOMATIC HORIZONTAL BAND SAW WRC1050 FOR CUTTING VENEER - SERVO – PERFORMANCE, DOUBLE CUT EFFICENT FAST CUTTING WITH HIGH CUT PRECISION Psdjghrnbepfx Ab Iegw with FAST CENTRATION and FAST TURNING system

Condition: used, Year of construction: 2006, functionality: fully functional, Fisher+Rueckle EM-28 Edge strengthening and trimming device edgemaster, year 2006 for sale! Pgedpfx Abjumrgao Iow Veneer strip length 420 - 2800 mm Veneer sheet width (cross grain) 400 - 4200 mm Veneer strip thickness (incl. trimming) 0,3 - 1,5 mm Veneer strip thickness 0,3 - 2,0 mm Production speed (continuous) 15 - 35 m/min. Cut-off each side 10 - 350 mm Tape (paper) width 6 mm Tape (paper) thickness 0,16 mm Type CP-99 Roll (core in- and outside) ∅ 75 mm, ∅ 325 mm Roll (width) 65 mm Tape running meter 3200 m Electric energy 1,1 kW Compressed air 6 bar Compressed air consumption 5 NL/min

Condition: ready for operation (used), Year of construction: 2017, Additional Equipment Hydraulic unit with pump, oil tank, and valves for operating the pressure and auxiliary cylinders Hydraulic control unit located at the upper part of the press for maintenance ease Control panel with buttons, selector switches, and a pressure control gauge This CMB PFR-CCL was manufactured in 2017. It features a motorized loading table and an automatic cold press with a maximum pressing force of 160 tons. The press operates with a hydraulic unit and a control panel for precise operation. Ideal for handling large panel sizes up to 5,500 x 1,600 mm. If you are looking to get high quality pressing capabilities consider the CMB PFR-CCL machine we have for sale. Contact us for more information. Pgedpfxowzn Dye Ab Ijw Application Types Pressing / Laminating

Condition: excellent (used), Year of construction: 1996, goose neck 920 mm feed speed 20 m/min veneer thickness ca. 0,4 - 2,0 mm motor 400 V, 50 Hz,, 3 PH incl. manual incl. glue thread Advise used machines: • Technical data without obligation, mistake and intermediate sale reserve. • Price is considered ex-location price • All articles or machines are bought as seen without any entitlement on warranty. Podpfx Aeg Nn E Neb Iegw • It is left to the choice of the buyer to view the machines before at its location. • Special arrangements are possible but only valid in written form. (We answer your inquiries only with stated address + telephone number!)

Condition: good (used), Brand: Cremona Technical condition: Very good Technical details: Maximum log length: 2350 mm Minimum log length: 770 mm Maximum log diameter: 740 mm Maximum veneer thickness: 4 mm Psderyxa Nepfx Ab Ijgw

Condition: excellent (used), Veneer gluing machine Pgjdpfx Abeu R I Ezo Ijw Working width 780 mm With paper and glue thread

Condition: excellent (used), functionality: fully functional, cutting length (max.): 2,050 mm, cutting width (max.): 680 mm, cutting height (max.): 60 mm, overall weight: 2,500 kg, total length: 3,300 mm, total width: 1,700 mm, total height: 1,500 mm, Hydraulic guillotine MONGUZZI tro 2050 Specification: • condition - used • manufacturer - MONGUZZI • model - TRO 2050 • max working width - 2050 mm Pgodpfx Ajvug U Eob Iow • max working height - 60 mm • max width of the cut element - 680 mm • min width of the cut element - 37 mm • main engine power - 4.0 kW • start-up 0-1 • analog cutting width indicator • knife length - 215 cm • feed width - 211 cm • photocell protecting against putting hands under the knife • manufacturer's documentation and spare knives - used • weight - approx. 2,500 kg • dimensions - 330 x 170 x 150 cm (length x width x height) Additional information: • the machine is in perfect technical condition, ready to immediate use • the photos shown show the actual condition of the item for sale • the device can be switched on and checked on site. • the price given in the auction does not include VAT and transport costs

Condition: used, Year of construction: 2009, functionality: fully functional, Machines connected in one line (all three machines are only sold together). 1. Veneer crossfeed splicing machine Fisher+Rueckle FZR-15, year 2009 2. Direct Stacking Device Fisher+Rueckle DAR-22, year 2009 3. Scissor lifting table 1000 kg TECHNICAL DOCUMENTATION (full on request) Veneer Cross-feed Splicing Machine FURNIMASTER FZR-15 Veneer format length (longitudinal to the fibre) 350 - 1500 mm Veneer format width (transverse to the fibre) 50 - 500 mm Veneer strip thickness 0.3 - 1.5 mm Max machine output 30 cycles/min. (the output rates are related to an average veneer strip width of 100 mm transversely to the fibre) Psdpfot Akcfox Ab Ijgw Connected load (basic machine): Power rate 13.5 kW Compressed air pressure 6 bar Power consumption: Electric power 6.2 kWh Compressed air supply 15 NL/min. Dimensions and weight (basic machine): 2940 mm L x 1000 mm W x 1530 mm H. 3200 kg Stacking device DA-2200 Veneer format length (longitudinal to the fibre) 600 * - 1500 mm Veneer format width (transverse to the fibre) 500 * - 2200 mm Maximum stacking width for output on the - right-hand side 2200 mm - left-hand side 2200 mm - back 1500 mm Stacking height max. 500 mm Power consumption from FZR-15 Weight 1200 kg Lifting table 2500 mm L x 1200 mm W. 1000 kg

Condition: ready for operation (used), Year of construction: 2025, Main Drive Stroke 400 mm This OMC PL 90s veneer press was manufactured in 2025. It features a plate size of 3000 x 1300 mm, an upward stroke of 400 mm, and a press force of 90 tons on 80% of the surface. Equipped with Elkom electronic heating plates, it ensures a maximum temperature of 120°C. The hydraulic system includes a two-stage unit with noise reduction and a fast closing/opening pump. Safety features include a safety cable, emergency button, and two-hand operation. Contact us for more information about this machine. Application Types Pedjwzn Edepfx Ab Ijgw Pressing / Laminating

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, machine/vehicle number: 30112, total length: 3,600 mm, total height: 1,630 mm, total width: 1,800 mm, overall weight: 8,000 kg, product height (max.): 250 mm, product width (max.): 250 mm, Flat cutter / Veneer guillotine DB25T reinforced version with roller table at the inlet, for veneers and wood veneers. The machine is fully operational, dismantled and ready for shipment. Cutting range from 0.15mm to 5mm. The machine can work in three modes: manual, semi-automatic, automatic. Technical parameters: Year of production: 2012 Maximum thickness of cut material - 250mm Maximum width of cut material - 250mm Length of cut material from 0.8m to 6m Psdpfx Abjwbpkno Iegw Blade length 1500mm Height of worktable - 9000mm Feeding speed - 60m/min Overall dimensions 3600x1630x1800mm Net weight: 8000 kg The price given in the advertisement includes an automatic feeder transporting the material around the machine.

Condition: excellent (used), cutting length (max.): 3,100 mm, overall weight: 4,000 kg, Cutting length (max.): 3100 mm Pjdpfx Ajwv Eiisb Ijgw

Condition: ready for operation (used), Panel length: 3200mm, panel width: 1000mm, max. workpiece thickness: 38mm, min. infeed length: 500mm. Psdem Habdopfx Ab Isgw

Condition: used, Used machine Used veneer saw of the company Scheer type FM 2 - 3000 Pgsdpfx Aewka Rdob Ijw Clamping by handwheel integrated suction unit Cutting length: 3000 mm movable Availability: short term Location: Röllbach

Condition: used, functionality: fully functional, Machines connected in one line (all four machines are only sold together): 1. Veneer 2-knife cutting guillotine CUTMASTER Monguzzi 2600 2. Glue application machine GLUEMASTER, year 2006 3. Roller conveyor MONGUZZI R2500, year 2009 4. Veneer fanning machine Fisher+Rueckle FANNINGMASTER AP515, year 2009 Tech. data Veneer 2-knife cutting guillotine CUTMASTER Monguzzi 2600 Cutting length 2.600 mm Length of cross-cut 1.477 mm Cutting height 100 mm Strip width min 20 mm Rip fence Yes Pressure beam pneumatic Blade drive pneumatic Weight 3.800 kg CE marking Pjdpfot A Nr Sox Ab Ijgw Total connection 10 kW

Year of construction: 1999, condition: good (used), splicing with glue thread zic zac splicing Pgjden Atu Dopfx Ab Iow arm span 630mm heater temperature regulation pedal control connection 230V

Condition: good (used), Cutting length 3050 Handwheel tension Chain feed Space required approx. L x W x H approx. 4200 x 800 x 1400 mm Pgedpewkfqpjfx Ab Iew All information is subject to change without notice.

Condition: good (used), Column projection 910 mm Feed approx. 15 m/min. constant Drive motor 0.18 kW Total connected load 0.45 kW You can call or write to us. We can speak and write German and Russian. You can also send messages in English Pgedpfx Asqwzfisb Isw 13.2.7.

Condition: ready for operation (used), Year of construction: 1998, Crossfeed Veneer Splicing Machine / Veneer Composer in Crossfeed Operation Manufacturer: Fisher Rückle Model: Delta FZX 28 Delta + RVP / BS completely equipped with: - Intermediate conveyor - Edge reinforcement and trimming unit - Stacking device with lifting table Maximum veneer strip length: 2800 mm Veneer strip thickness: approx. 0.4 – 1.5 mm (depending on veneer type) Veneer strip width: approx. 70 – 600 mm (crosswise to the grain direction) Adhesive types: urea-based or PVAC-based Pgedpfxjw Tlkte Ab Ijw This machine enables you to join veneer sheets crosswise using glue (PVAC or urea). It is necessary that the veneer sheets are pre-glued. The machine guarantees excellent joints of any type of veneer. Gluing is performed by a system of hydraulic cylinders applying horizontal pressure, which ensures tight, gap-free joins along the entire length. The machine’s heavy-duty, robust design guarantees longevity and reliable operation. Operation is simple and intuitive thanks to a clearly laid out control panel. Separate manometers provide the operator with direct access to the pressures for the heating plates, the horizontal pressing system, etc., allowing for quick changeover times. The machine’s upper traverse can be raised to allow easy and rapid access to the heating plates for cleaning and maintenance.

Condition: used, Kuper Type FW/Mini veneer splicing machine for precise gluing and splicing of veneer sheets using glue threads. Ideal for smaller operations or flexible applications in the production of high-quality veneer surfaces. Includes a supply of glue threads. Pgsdpfjwrfbdex Ab Isw Stand throat: 420 mm feed: approx. 6 m/min

Year of construction: 1998, condition: excellent (used), used Year: 1998 Start type: to be agreed Cost of delivery: Customer cover Pgsdod I Id Hepfx Ab Isw Conditions of delivery: OWN RECEIPT Category: Saws in Poland Subcategory: Longitudinal saws for veneer

Condition: used, cutting length: 3.000 mm Saw blade diameter: 180 mm engine: 2.5 hp Veneer saw Scheer FM 2-3000 for sawing or cutting veneer or thin wood. Pgsdpfx Aslf H S Hjb Ijw