Condition: new, Year of construction: 2026, Machine with special rotor Advantages: + special rotor with reduced knife protrusion + Motor 22 kW + effective square knife * for pallets: up to 10 pallets per hour * depending on the sieve and material. With smaller residual wood, significantly more. Engine: 22 kW; 400 V - 50 Hz - 3 ph, Sieve: 15/20 mm hydraulically operated slide Current screen perforation (15/20 mm) * can be exchanged Extraction nozzle Ø 200 mm. Feed opening 1000x1000 mm Bedodv Eu Hepfx Agkodi Dimensions: 2000x1800x1645mm Example image above: The color of the system may vary Weight: 1920 kg. Included as standard: - Control cabinet with PLC control - automatic star / delta start - fast hydraulics - automobile. OFF when the rotor is idling - Speed ​​70-90 rpm for high throughput - cycle control to avoid idle times, - performance-increasing step control of the hydraulic slide, - Pertinax guides for hydraulic slides, - vibration-damping machine feet, - CE conform. The following options are available at an additional cost: - Additional row of knives + € 2,790 - segment bottom + € 6,890 (recommended for materials with a wall thickness thinner than 3 mm) - Special K-rotor storage + € 3,480 If necessary, consider shredding plastic with sieves smaller than 15 mm or with a lot of fines. If the bearings are lubricated with grease every approx. 4 weeks in operation, this is not necessary) - Raise the shredder by 30 cm (preparation for conveyor belt) + € 2.480 net - Angled conveyor belt (discharge height approx. 220 cm) + € 12.980 net - Overbelt magnet + € 5.980 net - Control conveyor belt and overbelt magnet + € 2.750 net (Start and stop synchronized with the hacker) - Exhibition hopper 1500x1500 mm + € 3.480 net Requirements for the raw material: - The moisture content (atro) must be below 30% - The loading must be free of metals and mineral impurities. This can result in damage to the tools and / or increased wear

Condition: new, ZENO Twin rotor shredder ZDV 2500x2000, mobile on chain chassis, incl. discharge conveyor and magnet separator, motor power 298 kW, 1900 rpm, MTU-Diesel motor, rotor flight circle Ø 575 mm, 2 x 12 cutting inserts on tool holder, show machine. Bdsdpfebg Engox Agkei

Condition: used, Intake opening: 1.200 x 1.600 mm Motor power: 110 kW, without gearbox Rotor flight circle: 380 mm Bdsdpfsbq Stqjx Agkei Rotor speed: approx. 470 rpm Cutting system: 66 cutting inserts on toolholder Screen: reinforced screencage, 15 mm perforation Counter knife: with mechanical adjustment device Machine weight: approx. 5.900 kg

Condition: new, Funnel opening: 2,500 x 2,000 mm Rotors: 2 units Rotor diameter: 580 mm each Rotor design: 5 and 6 cutting teeth Drive: 2 x 90 kW with planetary gearboxes Hydraulic locking system for sieve flaps to remove disruptive materials Weight: approx. 18,500 kg Bodobq St Hepfx Agkodi

Condition: as good as new (ex-display), Intake opening: 1200 x 1600 mm Motor power: 55 kW Rotor flight circle: Ø 600 mm Rotor speed: approx. 84 rpm Cutting system: 56 cutting inserts 60x60x30 mm on toolholders Screen perforation: Ø 40 mm Counter knife: with cutting gap adjustment Machine weight: approx. 7.000 kg Bdedpjcbnigsfx Agksi Machine number: A 21

Condition: new, Year of construction: 2026, total height: 2,000 mm, total width: 1,480 mm, total length: 1,200 mm, overall weight: 2,200 kg, rotor diameter: 350 mm, rotor length: 800 mm, sieve perforation: 3 mm, number of blades: 18, rotational speed (max.): 400 rpm, warranty duration: 12 months, power: 30 kW (40.79 HP), shaft length: 800 mm, MIZAR FGR Series - Industrial Fine Granulator for High-Performance Cable Recycling Superior Granulation for Industrial Waste Processing Mizar Recycling Machinery’s FGR Series granulators deliver high-performance results in industrial waste processing and recycling applications. These fine granulators are precision-engineered to efficiently grind and granulate various scrap materials. Featuring superior crushing capacity and fast processing times, the FGR Series effectively handles challenging materials, including copper cables, plastics, and electronic waste. Built with durable materials and wear-resistant blades, the FGR Series ensures long-lasting, reliable performance. Prioritizing energy efficiency, these machines deliver high processing output with low power consumption, significantly reducing your energy costs. KEY ADVANTAGES & FEATURES • High-Performance Crushing: Superior capacity for fast and effective granulation of scrap materials. • Industrial Durability: Constructed with wear-resistant components and high-grade blades for extended service life. • Energy Efficiency: Optimized design provides maximum throughput with minimal energy consumption. • Safety-First Design: Integrated emergency stop systems and safety applications ensure a secure industrial working environment. • Versatile Applications: Ideal for diverse needs ranging from complete recycling lines to scrap waste management facilities. MODEL RANGE & TECHNICAL SPECIFICATIONS Bdjdpehbhf Tofx Agkoi • FGR S: Capacity: Up to 400 kg/h | Total Power: 15 kW | Rotor: 350x400 mm | Blades (R+S): 7+2 • FGR M: Capacity: Up to 800 kg/h | Total Power: 30 kW | Rotor: 350x800 mm | Blades (R+S): 14+4 • FGR L: Capacity: Up to 1,300 kg/h | Total Power: 45 kW | Rotor: 350x1200 mm | Blades (R+S): 21+6 • FGR XL: Capacity: Up to 2,000 kg/h | Total Power: 75 kW | Rotor: 350x1600 mm | Blades (R+S): 28+8 Ready to upgrade your industrial recycling capabilities with high-performance granulation? Contact us for a customized quotation, detailed technical drawings, or to arrange a performance test. Mizar Recycling Machinery

Condition: new, Exhibition machine Infeed width: 1,400 mm Infeed height: 550 mm Rotor diameter: 1,600 mm Bodpfxegabfbs Agkedi Rotor knives: 4 pcs Stator knife: 1 pc, externally adjustable Infeed unit: 2 x 5 rollers Motor: 250-500 kW Machine weight: approx. 30,000 kg

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, pressing force: 30 t, Tested, cleaned, full service was carried out. Fully equipped, ready to use! Bsdpfx Agoyizpqjkodi

Condition: reconditioned (used), Year of construction: 2005, functionality: fully functional, pressing force: 90 t, filling opening width: 1,620 mm, filling opening length: 972 mm, bale width: 720 mm, bale height: 1,100 mm, bale weight: 600 kg, overall weight: 32,000 kg, pressure: 300 bar, power: 110 kW (149.56 HP), BOA baler with double pre-press flaps available in fully refurbished condition. The machine is located at our workshop in Almelo and can be inspected by appointment. If required, a matching (new) conveyor belt can be produced. The machine is perfectly suited for baling various materials such as cardboard, paper, plastics, car tires, and RDF. The machine is equipped with a so-called refu-ram. This is ideal for baling materials such as plastic bottles and/or shredded RDF. Bedsxbc U Dspfx Agkodi Technical specifications: Drive: 2x 55 kW Pressing force: 90 tons Bale dimensions: 1100 x 720 mm Bale weight: approx. 600 kg (depending on material) Number of tying wires: 5 vertical

Condition: refurbished (used), “SKET EMT 500/1280 SF-R” for Sale Manufacturer: SKET Type: EMT 500 / 1280 SF-R Bedpfx Agsw R N Uqeksdi L x Dia.: 1.350 x 500mm Voltage: 110 V Amperage: 17 A Power: 1,9 kW

Condition: new, Year of construction: 2026, functionality: fully functional, RSS 2-shaft shredder, 800 series, 2 x 7.5 kW Rotor length: 800 Blade thickness: 20 mm The machine can be customized to your specifications, including the control panel. Delivery time upon consultation. Infeed and outfeed conveyor belts are available as an option. This shredder is ideally suited for destroying, for example, hard drives, laptops, mobile phones, rubber, wood, paper, etc. Want to know more? Call or email us. Bodpsw Ry Alofx Agkodi Upon consultation, we can also deliver and install the machines. Please provide your name, company name, and a valid telephone number so we can respond quickly.

Year of construction: 2026, condition: new, functionality: fully functional, Bucket Screen buckets for screening all loose materials. 8mm and 16mm sizes of screened fractions, both of which are already included in the price of the bucket. HARDOX as standard on the most used parts of the bucket. ANTISTICK the non-stick surface of part of the bucket, for faster and easier work. Bodpfxsv D Hb Do Agkedi Various sizes, 2,3,4,5 or 6 shaft buckets

Year of construction: 2016, condition: used, No. 10010 Screening machine Doppstadt SM 620 K Used, year of construction 2016 (overhauled by the manufacturer in 2024) Mobile drum screen on chains Can be used for humus / soil, wood, waste, compost, light building rubble, etc. 7500 working hours Crawler chassis incl. 2 driving speeds Track width 500 mm Deutz TCD3.6 L4 diesel engine, 90 kW at 1600 rpm (meets EUROMOT IIIB/Tier 4i emission standard) Auxiliary pump drive for connecting additional hydraulic equipment Reversible fan on water and oil coolers Complete engine unit swivels out Fuel tank 300 litres 5 m3 hopper capacity Hydraulically folding side belt, belt length 5000 mm, belt width 1000 mm Bsdev Eyqbopfx Agksdi Hydraulically folding rear belt, belt length 5000 mm, belt width 1000 mm Emergency stop switch on side and rear belt Load-sensing material feed from the conveyor floor to the screen drum Infinitely variable screening drum speed from 0 - 18 rpm Infinitely variable hopper belt speed from 0 - 0.17 m/s Control box at the rear of the machine with the following functions: Emergency stop switch (screen only) / Fold in & out rear belt / Fold in & out side belt / Bend side belt Hydraulically folding cleaning brush with individual brush elements and spring tines Central lubrication bars 24 V electrical control Radio remote control incl. transmitter, receiver, 230 V charger, 12/24 V charging cable, holder for transmitter (The following functions can be controlled: Engine stop, engine speed +/-, fold rear conveyor in & out, fold side conveyor in & out, move & steer machine, prepare stone grid open/close) Hydraulic preparation for star screen operation Hydraulic quick hitch between rear conveyor and machine Acoustic start-up warning Doppstadt Telematic system Paint finish: RAL2011 deep orange Additional hydraulic connection 40 l/min at the rear of the machine Magnetic roller for rear conveyor Flow divider on rear conveyor Internal toothed hopper belt drive Screening drum SM620 QV30-38 BL08 for SM 620 profi/Plus/.2 (length 5430 mm / diameter 2000 mm / thickness 8 mm / perforation 30 mm (offset perforation)) Transport dimensions approx. 10550 x 3000 x 3690 mm LWH Weight approx. 24000 kg Sale on behalf of customer, ex location near 85221 Dachau, without dismantling, without transport and assembly Errors in description and price excepted Dismantling, transport and loading by us optionally possible To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended Sold as is Technical details, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale Any warranty is excluded for used machines, the following applies: ‘purchased as viewed’ Pictures and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices plus VAT, payment before collection or dispatch Terms of delivery: ex location

Condition: new, functionality: fully functional, overall weight: 1,300 kg, Year of construction: 2026, Mobile vibrating screener on a trailer of category O2, can be supplied with lifting chains and a petrol generator. Very easy to use. Quick change of meshes. Built-in conveyor for fine fraction. Bodpfxoxpg I Rs Agksdi

Condition: new, M&S Gruseck GmbH NEW screening drums from the market leader - 100% MADE IN GERMANY! Screening drum suitable for a Doppstadt SM518 Bsdpfx Agexnyl Tjkjdi Square staggered perforation (QV) 30mm Sheet thickness = 8mm !!! Over 500 screening drums manufactured per year speak for themselves !!! - Premium quality! - Always tested! True running in operation! - Best price-performance ratio! - Short delivery times! - Stamped perforations for perfect screening results! - Various perforations available (square, round, honeycomb, etc.)! - Narrow webs for optimal screening surface! - Various sheet thicknesses! - Different materials available (at least S355)! - Special customer requests are not a problem for us – they're our specialty! - All drums are painted! - Large stock selection! - Suitable for all common screening machines!

Condition: new, M&S Gruseck GmbH NEW screening drums from the market leader – 100% MADE IN GERMANY! Screening drum suitable for a Doppstadt SM620 Square staggered perforation (QV) 12mm Sheet thickness = 6mm Bjdpsxnyp Eofx Agkedi --- Over 500 manufactured screening drums per year speak for themselves --- - Premium quality! - Individually tested! Perfect concentricity during operation! - Excellent value for money - Short delivery times! - Punched perforations for optimal screening results! - Various perforations available (square, round, honeycomb, etc.)! - Narrow web spacing for maximum screening surface! - Various sheet thicknesses! - Various materials available (at least S355)! - Special customer requirements are not a problem for us—they are our specialty! - All drums are painted! - Large selection in stock! - Compatible with all common screening machines!

Condition: new, M&S Gruseck GmbH NEW drum screens from the market leader – 100% MADE IN GERMANY! Drum screen suitable for a Doppstadt SM620 Staggered square perforation (QV) 30mm Sheet thickness = 8mm !!! Over 500 drum screens manufactured annually speak for themselves !!! - Premium quality! - Consistently tested! True running operation! - Best price-performance ratio - Short delivery times! - Stamped perforations for perfect screening results! - Various perforation patterns (square, round, honeycomb, etc.)! - Small bridges for optimal screening surface! Bdedpfxoxnywps Agksi - Different sheet thicknesses! - Various materials available (at least S355)! - Special customer requirements are not a problem for us—they’re our specialty! - All drums are painted! - Large selection in stock! - For all common screening machines!

Condition: used, overall weight: 2,000 kg, rotor diameter: 252 mm, total length: 2,200 mm, total height: 2,520 mm, total width: 1,500 mm, rotor width: 800 mm, power: 18.5 kW (25.15 HP), filling opening width: 800 mm, filling opening length: 1,000 mm, sieve perforation: 15 mm, extraction nozzle diameter: 200 mm, No. 04546 Single-shaft shredder WEIMA WL 6 Used Bedpfxoznnf Uo Agksdi Single-shaft shredder for shredding wood waste, offcuts and panel materials Motor power 18.5 kW Rotor diameter 252 mm Rotor width 800 mm Rotor speed 90 rpm Infeed opening 1000 x 800 mm LW V-rotor system Hydraulic material pusher Manual and automatic operation Perforated screen with a hole diameter of approx. 15 mm Two-part feed hopper approx. 1050 x 1000 x 1800 mm LWH (each of the two hopper sections is approx. 900 mm high) 2 extraction ports, diameter 200 mm each Transport dimensions approx. 2200 x 1500 x 2520 mm LWH Weight approx. 2000 kg To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended Sold as is Technical specifications, condition description, year of construction and scope of delivery according to manufacturer’s brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Payment terms: Prices plus VAT, payment before collection or shipment Delivery terms: ex warehouse

Condition: used, Hazemag Universa 2030 rotor shredder with fixed shredding knives, designed for coarse shredding of wood and other materials. The machine is equipped with a hydraulically adjustable grate system for controlling the output material size. Bsdozpxfuepfx Agksdi Technical specifications: Manufacturer: Hazemag Model: Universa 2030 Rotor length: 3000 mm Rotor diameter: 2000 mm Rotor weight: approx. 25 t Rotor speed: 480 rpm Drive motor: 500 kW Electric motor and starter included Hydraulically adjustable grate system Output size adjustable from 100 to 400 mm (10–40 cm) Total machine weight: approx. 100 t Approximately 1,000 operating hours

Condition: new, Year of construction: 2026, total height: 2,000 mm, total width: 1,580 mm, total length: 1,600 mm, overall weight: 2,800 kg, rotor diameter: 350 mm, rotor length: 1,600 mm, sieve perforation: 3 mm, number of blades: 18, rotational speed (max.): 400 rpm, warranty duration: 12 months, power: 30 kW (40.79 HP), MIZAR FGR Series - Industrial Fine Granulator for High-Performance Cable Recycling Superior Granulation for Industrial Waste Processing Mizar Recycling Machinery’s FGR Series granulators deliver high-performance results in industrial waste processing and recycling applications. These fine granulators are precision-engineered to efficiently grind and granulate various scrap materials. Featuring superior crushing capacity and fast processing times, the FGR Series effectively handles challenging materials, including copper cables, plastics, and electronic waste. Built with durable materials and wear-resistant blades, the FGR Series ensures long-lasting, reliable performance. Prioritizing energy efficiency, these machines deliver high processing output with low power consumption, significantly reducing your energy costs. KEY ADVANTAGES & FEATURES • High-Performance Crushing: Superior capacity for fast and effective granulation of scrap materials. • Industrial Durability: Constructed with wear-resistant components and high-grade blades for extended service life. • Energy Efficiency: Optimized design provides maximum throughput with minimal energy consumption. • Safety-First Design: Integrated emergency stop systems and safety applications ensure a secure industrial working environment. • Versatile Applications: Ideal for diverse needs ranging from complete recycling lines to scrap waste management facilities. MODEL RANGE & TECHNICAL SPECIFICATIONS • FGR S: Capacity: Up to 400 kg/h | Total Power: 15 kW | Rotor: 350x400 mm | Blades (R+S): 7+2 • FGR M: Capacity: Up to 800 kg/h | Total Power: 30 kW | Rotor: 350x800 mm | Blades (R+S): 14+4 • FGR L: Capacity: Up to 1,300 kg/h | Total Power: 45 kW | Rotor: 350x1200 mm | Blades (R+S): 21+6 Bdsdpjzquy Refx Agkji • FGR XL: Capacity: Up to 2,000 kg/h | Total Power: 75 kW | Rotor: 350x1600 mm | Blades (R+S): 28+8 Ready to upgrade your industrial recycling capabilities with high-performance granulation? Contact us for a customized quotation, detailed technical drawings, or to arrange a performance test. Mizar Recycling Machinery

Condition: used, Year of construction: 2015, Manufacturer: HSM Type: HL 4010 Re Year of manufacture: 2015 Bedpfjzxqpdjx Agkodi Pressing force: 40 t

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, total length: 6,500 mm, overall weight: 18,000 kg, rotor length: 1,700 mm, Crushing plant, twin-shaft shredder, slow-speed model, Drive: electro-hydraulic, electric motor 200 kW, Hydraulic unit with control cabinet and operator panel, Bdedpfx Agozv U Ifekei 2 brand-new rotor shaft bearings and labyrinth seals on the drive side. Discharge conveyor belt recently replaced.

Condition: used, Year of construction: 2009, operating hours: 15,600 h, functionality: fully functional, cutting force: 800 t, total width: 6,400 mm, total length: 18,500 mm, total height: 4,600 mm, overall weight: 1,53,000 kg, year of last overhaul: 2024, Hydraulic scrap shear Taurus In very good condition. Bdodpjzudwasfx Agkji

Condition: ready for operation (used), Year of construction: 2017, Brand: HSM Model: V-Press 1160 max Year of construction: 2017 Press force: 532 kN Voltage: 400 Bodo Aa Nxwopfx Agkodi Max. bale weight: up to 550 kg (depending on the material) Bale dimensions: 120 x 110 x 120 cm Machine weight: 2403 kg Machine dimensions: 180 x 157 x 298.5 cm Feed opening dimensions: 119.5 cm x 65 cm The HSM 1160 V-Press features simple operation, a powerful pressing force, and is energy-efficient. Looking for a more compact model? Then take a look at the HSM 860 – ideal for those who want to save space without compromising on pressing force. Video available upon request!

Condition: ready for operation (used), Year of construction: 2016, Make: HSM Model: V-press 860 plus Year of manufacture: 2016 Press force: 418 kN Voltage: 400 Max. bale weight: 480 kg (depending on the material) Bale dimensions: 120 x 120 x 78 cm Bedpo Afdmajfx Agkedi Machine weight: 2083 kg Machine dimensions: 180 cm x 125 cm x 298.5 cm Feed opening dimensions: 120 cm x 65 cm Video available upon request.