Used wide belt sanders 1300-1499mm working width for sale (122)

Condition: as good as new (ex-display), Year of construction: 2023, functionality: fully functional, total width: 2,000 mm, total height: 2,070 mm, total length: 1,800 mm, grinding width: 1,350 mm, power: 11 kW (14.96 HP), grinding belt length: 2,150 mm, grinding belt width: 1,370 mm, extraction nozzle diameter: 200 mm, power of feed motor: 800 W, input voltage: 400 V, Slight signs of wear from demonstration. The LIBRA 45 is characterized by a rich range of standard equipment, a very robust construction (both the base frame and the work units), sanding shoes with a larger contact surface and modern control systems Motorized table height adjustment Digital display for the working height Electronically controlled sanding belt oscillation with reduced compressed air requirement Automatic star-delta start-up Natural rubber feed carpet with negative profile Automatic carpet centering Support table with rollers at the inlet and outlet of the feed carpet Large sanding roller diameter 140 mm Carpet feed via gear motor with two speeds Flexible steel pressure rail in front of the first unit Rubber pressure rollers, in front of and behind each work unit Pneumatic belt tension for each unit with decimal correction option for grain size/belt thickness Equipment: Work table height adjustment with electronic display of the working height Oscillation of the sanding belts with electronic system Rubber-coated grooved pressure roller at the inlet 1° position with Backflow protection (C.E.) Star-delta start of the main motors Grooved calibration steel roller Selector switch for positioning the sanding shoe from the control panel Extraction connection Extraction nozzle diameter 2 x 200 mm Djdpfx Adsvxu E Hsdjwf Electrical data Power of height adjustment motor 0.25 kW Power of feed motor 0.8 kW Power of drive motor 11 kW Connection voltage 400 V Mains frequency 50 Hz Grinding unit Grinding belt length 2150 mm Grinding belt width 1370 mm Grinding width max. 1350 mm Feed unit Feed speed 4.5 / 9 m/min Workpiece Height min. 4 mm Height max. 170 mm

Condition: used, Year of construction: 2015, With sanding unit consisting of: - 1 combo unit, pneumatic sanding pad for steel veneer sanding - Dust brush Vacuum carpet and vacuum system pre-installed Roller table at the inlet 200 mm Roller table at the outlet 1000 mm Constant table - constant infeed height Automatic workpiece thickness adjustment/scanning Machine control via touchscreen Dwsdpfjwa Uluox Addef Used, excellent condition Make: Bütfering Type: SWT 215 / L Optimat Year of manufacture: 2015 Machine number: Working width approx. 1350 mm Passage height approx. 3-160 mm CE type-tested Belt dimensions approx. 1370 mm x 2150 mm long belts Feed speed continuously variable 2.5-13 m/min. 1 x 15 kW combi unit with profiled steel roller D 160 Diameter 160 mm Pneumatically controlled air shoe Space requirement approx. 1625 mm x 2000 mm x 2300 mm Weight approx. 1500 kg Total connected load approx. 16 kW Storage location 97447 Gerolzhofen, free on load, unpacked Sold in the current condition as seen, without warranty or guarantee

Condition: excellent (used), Year of construction: 2020, We offer: Deburring machine Manufacturer: Viet Type: SV3-4.3 RVXR Year of manufacture: 2020 Technical specifications and features: - Sanding belt change on the left side of the machine. - Tool set - Digital thickness display - Material too thick at the inlet - Electro-pneumatic oscillation control - Air filter with condensate separator and automatic drain - Maintenance-free pneumatics - Pneumatic lifting and lowering when switching the units on and off - Machine with head adjustment (fixed working height 900 mm) - Lifting system on 4 columns (spindle) with chain drive - Table extensions at the front and rear, each with 1 roller - Industry 4.0 (LAN) package with LAN connection to the network - Working width: 1350 mm - Machine with movable head - Centesimal lifting system with inverter - Useful working height 160 mm - LED lighting inside the machine - Electronic belt control for the longitudinal units - Calibration sanding unit with sanding roller diameter 190 mm, belt length 2620 mm - Electromechanical grit set - The speed of the sanding unit can be adjusted using the frequency converter The sanding belt can be adjusted. - V-Spin unit with 15 disc sanding system / diameter 80 mm The V-Spin unit consists of 15 disc brushes arranged in a row and moving in opposite directions. The combination of these two movements makes the V-Spin unit suitable for rounding sharp edges and removing slag or oxides. - 16 backing pads for V-Spin units, diameter 80 mm Scotchbrite + 80 grit abrasive - 16 backing pads for V-Spin units, diameter 80 mm Tampico + 80 grit abrasive - X-Spin unit / sanding system with 15 discs / diameter 123 mm The group consists of 5 rotating heads with 3 pads of rotating sanding brushes (diameter 123 mm) inserted inside each head. - Oscillating Scotch-Brite brush - Linear cleaning systems - Conveyor belt Feed speed 1.1 kW (1.5 HP) Speed 0.5-7 m/min Conveyor belt made of HYPALON rubber, heat- and oil-resistant, hardness 60 SH with a smooth surface - Belt cleaning fan for the conveyor belt including suction - IPC MONITOR 15" touchscreen control for operating the machine, up to a maximum of 10 processing units. The control manages the following processes: - Start sequence of the selected drive motors - Storage of 1,000 processing programs - Automatic positioning of the working thickness regulator - Acoustic and visual indicator when the machine starts up Dedpfx Aev Hxrgoddewf - Operating hour meter - Automatic control of the feed speed depending on the processing performance (expressed in square meters). This allows for a longer service life of the sanding belt based on the statistics. The machine is in very good condition and is used for 2 Euro pallets. New sanding belts included. Accessories, tools, and clamping devices shown are only included in the scope of delivery if noted in the additional information. Subject to changes and errors in technical data and information, as well as prior sale.

Condition: as good as new (ex-display), Year of construction: 2021, functionality: fully functional, grinding width: 1,350 mm, SCM wide-belt calibrating and fine sanding machine Model dmc sd 60 RCS 135 Technical data: Working width 1,350 mm min./max. working height 4-170 Sanding belt width 1,370 mm Dwsdpfotwqn Sex Addsf Sanding belt length 2,150 mm Main motor power 11 (15) kW (HP) Gear motor 0.45/0.8 (0.6/1.1) kW (hp) Feed speed 4.5/9 4.5/9 m/min. Standard equipment: - R140/85 rubber-coated calibrating roller diameter 140 mm 85 SH - 1st pos. - R160/45 rubber-coated sanding drum diameter 160 mm 45 Sh - 2nd pos. - Hard sanding pad with manual adjustment of the working height - Motor power 1 unit 11 kW (15 HP) - Electronic ammeter for the main motor to display the power consumption - Electronic display of the working height - Electronically controlled sanding belt oscillation - Rubber pressure rollers - anti-kickback device in the infeed before the first unit - Rubber feed carpet 60 SH - Roller table with two rollers in the infeed and outfeed of the work table - Carpet feed with two speeds 4.5 / 9 m/min with gear motor - Automatic carpet centering incl. the following special accessories: 1 pc. Version "B" for RCS with: pneumatic activation and deactivation of the roller 1. unit "R" + pneumatic activation and deactivation of the roller 2. unit "CS" + "MESAR" elastic link sanding shoe + pneumatic activation and deactivation of the sanding shoe unit + electronic programming unit "LOGIC 50 + electronic adjustment of the working height 1 pc. CE safety regulations 1 pc. roller table in infeed and outfeed for long workpieces, equipped with 5 non-driven rollers 1 "RA" inclined ribbed steel contact roller 1st unit 1 pc. Main motor 18.5 kW (PS 25)

Condition: excellent (used), Year of construction: 1999, functionality: fully functional, working width: 1,350 mm, grinding width: 1,350 mm, grinding height: 160 mm, 1. calibration roller unit 2. electronic shoe unit 3. electronic shoe unit stable industrial machine for calibration, fine sanding and lacquer sanding Dwsdjwhqmwspfx Addef

Condition: used, Year of construction: 2006, Technical data: - Manufacturer: Bütfering - Type: Optimat SCO 113/C/DIA - Year of construction: 2010 - Sanding belt width: 1370 mm - Sanding belt length: 2150 mm - Suction volume: approx. 3,530 m3/h Dwedpfxev Ecy Ss Addsf - Suction nozzle: 1 x Ø 180 mm (sanding unit) 1 x Ø 140 mm (finishing brush) 1 x Ø 100 mm (suction fan) - Combined sanding unit with switchable sanding sanding drum and sanding pad. Dqlu3Z - Automatically adjustable, profiled steel steel contact roller with grain equalisation for calibration an electronically controlled pressure beam with lacquer sanding package. - Infinitely variable frequency-controlled sanding belt speed sanding belt speed 2 - 18 m/s. - Vacuum clamping device, fan integrated in the machine stand - Drive motor: 15 kw - Total connected load: approx. 19 kw - Operating voltage: 400 V / 50 HZ. - 1 pc. of UNI-BLOWER on outfeet side - 2 pc. of LIROS/SEOT 09 anti static units on outfeed side ( top/bottum )

Condition: new, Year of construction: 2025, functionality: fully functional, grinding width: 1,350 mm, The HSM is the precision surface sanding machine tailored to the needs of small and medium-sized craft and industrial businesses. Whether for effect sanding, cross sanding, lacquer or high-gloss sanding, for panels, solid wood, or veneered workpieces – the Heesemann HSM is the perfect sanding machine for the trade! The surface sanding machine is particularly attractive for joiners and interior fitters. The HSM is available in predefined standard configurations, equipped with two, three, or four units, and can be fitted with a cross belt for cross sanding applications. Dwedpfx Adow Db Dredof Units and features can be selected individually. We are happy to provide you with a customized offer.

Condition: refurbished (used), Year of construction: 2007, functionality: fully functional, machine/vehicle number: 26476, working width: 1,350 mm, grinding width: 1,350 mm, overall weight: 7,500 kg, grinding height: 200 mm, height adjustment type: electric, grinding belt length: 2,000 mm, workpiece height (max.): 200 mm, grinding belt width: 1,350 mm, power of feed motor: 2,200 W, input frequency: 50 Hz, input voltage: 400 V, workpiece width (max.): 1,350 mm, Five-belt calibration and fine grinding system, top and bottom grinding for solid wood or wood materials Factory overhauled to the latest standard Dedpfsvy Dt Nex Addswf 5 sanding units (2x calibration roller top / bottom + cross sanding unit, 2x segment sanding pads, 1 of which includes a unique diagonal sanding unit (patented KÜNDIG Brilliant technology)), as well as the KÜNDIG Enormatic control for automatic workpiece feeding. Machine completely overhauled - for more information see appendix

Condition: excellent (used), Year of construction: 2007, machine/vehicle number: 2007.10.191, with Heesemann dust extraction machine, type: EA 8 Grinding width: 1350 mm Workpiece height: 3 – 150 mm Units: 3 x cross grinding units, each 15 kW; 1 x longitudinal grinding unit with pressure lamella belt 15 kW; 1 x brush roller unit 0.75 kW; Total power connection: approx. 80 kW Total air requirement: 193.5 m³/min Dodjv Enzuopfx Addjwf

Condition: good (used), Year of construction: 2000, • Sanding width (mm): 1350 Dwedpfowwlm Dox Addsf • Workpiece thickness (mm): 3 - 150 • Total sanding units: 2 • Longitudinal belt: 2 • Contact roller diameter = 200 mm: 1 /15 kW • Combination unit: with small roller • Cleaning brush: 1 x diameter = 120 mm • Vacuum table • Intermediate lacquer sanding • Constant table height • Carpet cleaning • Longitudinal unit, motor: 15 kW, 1.8 - 18 m/s • Feed rate: 3 - 12 m/min • Sanding belt length, longitudinal unit (mm): 2,100 x 1,400 • Pressure beam: CSD system, electromagnetic, wear-free • Conveyor belt: new • Availability: inspected, in stock

Condition: ready for operation (used), Year of construction: 2000, operating hours: 3,511 h, functionality: fully functional, machine/vehicle number: 67 881, grinding width: 1,350 mm, grinding height: 150 mm, grinding belt length: 1,600 mm, No reserve price - guaranteed sale at the highest bid! TECHNICAL DETAILS Grinding height: max. 150 mm Grinding width: max. 1,350 mm Grinding belt length: 1,900 mm Number of units: 3 sanding units (1 cross belt, 2 sanding pads) Segment sanding pad: electronic Width: 25 mm Dwedpfx Adewlqvmedef Combination unit power: 16.5 / 21 kW Cross belt power: 15 kW Shoe unit power: 15 kW MACHINE DETAILS Power: 21 kW (28.55 HP) Total connected load: 59 kW Total weight: 4,550 kg Total length: 2,740 mm Total width: 2,000 mm Total height: 2,125 mm EQUIPMENT - 3 sanding units: 1 cross belt, 2 sanding pads - Cleaning brush - Vacuum table - Blow-off device for sanding belt - Belt change side on the left - Insert control - Bütfering articulated pressure bar

Condition: good (used), Year of construction: 1996, Combination machine Roller - electronic segmented shoe (CPS system) Through-feed 1350 mm 3 different motor power ratings selectable 3 different sanding speeds Variable belt speed Belt blow-off device Dedpfswumtysx Addowf Cleaning brush

Condition: new, Year of construction: 2025, functionality: fully functional, grinding width: 1,350 mm, The HSM Compact is the universal wide belt sander for workshops. It is perfect for calibrating, intermediate sanding of veneers and lacquer, structuring, and cleaning of panels, solid wood, or veneered workpieces. Thanks to its compact dimensions, it is ideally suited for a wide range of requirements. With the HSM Compact, you get a multifunctional sanding center occupying just 4.5 sqm, making it ideal for producing a variety of surface finishes. It is Heesemann’s smallest machine and comes standard with the patented CSD magnetic pressure beam, allowing you to move from manual sanding to automation. HSM .2 Compact ROLLER/LONGITUDINAL SANDING UNIT - Year of manufacture: 2025 - Working width: 1,350 mm - Vacuum clamping system with vacuum extraction table and demand-driven suction - Constant working height (880 mm) - Workpiece thicknesses: 3–200 mm - Automatic workpiece thickness measurement at infeed - Non-driven rollers at machine infeed and outfeed - Electromagnetic pressure beam (CSD) - 15.6″ touch display Dodpfew Dbx Njx Addswf - LED lighting on abrasive belt support side - Outfeed folding table with wooden surface - Structuring brush unit (Ø 200 mm) incl. 5.5 kW drive via frequency inverter and quick-change system, Anderlon fill material - Cleaning brush unit, horsehair (Ø 120 mm)

Condition: used, Year of construction: 2010, functionality: fully functional, machine/vehicle number: S4 1TT33 3250, total width: 4,340 mm, total height: 2,775 mm, total length: 5,145 mm, working width: 1,350 mm, workpiece height (max.): 16 mm, Viet S4 sanding and calibrating machine. * 1st Longitudinal sanding unit T60 E IPP HP DU; Belts 1380x3250, Motorization by converter 15 KW Djdpfjutdrhsx Addewf * 2nd Transversal sanding unit T60 ET HP DUO , Belts 150x8700, Motorization by Converter 15KW * 3rd Transversal T60 AND HP DUO sanding unit, 150x8700 belts, powered by 15KW converter Variable speed belt 2-20 m/min suction unit.

Condition: excellent (used), Year of construction: 2002, machine/vehicle number: AE700472 Ref: 111810, 1350m/m Wide Belt Sander with 3 Sanding Rollers Calibrating and Sanding machine In very good condition. Electronic Control Unit. Capacity 1350m/m wide. Very good HP. With at least 5 boxes of Cloth Backed Sanding Belts 40/60 & 80 Grit. Dwodpfx Ast Iwguoddof Price of STG £15,000.00 Includes loading buyers transport. Location: Burrowbridge, Somerset TA7 0SG UK Photos available on WhatsApp

Condition: used, Year of construction: 2004, - Cutting width (mm): 1300 Djdpfx Adstt Slcodowf - Workpiece thickness max. (mm): 3 -140 - Brushing device: Brush roller diameter 150 mm - Drive for brush-off device (kW): 1.5 - Transport bed: 3.0 kW FU 4.0 kW - Feed speed (m/min.): 5 - 25 - Workpiece conveyor belt suction clamping system (kW): 7.5 - Total weight (kg): approx. 7500 - Total power connection (kW): approx. 73

Condition: good (used), Year of construction: 1998, functionality: fully functional, working width: 1,300 mm, 1 bottom calibrating sander equipped with 3 bottom belts Dedpfsw A A Enex Addswf 30, 22, 18.5 kW 1 top calibrating sander equipped with 3 top belts

Condition: excellent (used), Year of construction: 2004, Calibration / sanding line top bottom COMPACT - SATURN 135 R.R.K Inf and SATURN 135 RRK Sup Dedpfxeugr Iij Addjwf RRK Inf: Motorized up/down adjustment with electronic thickness display - Fixed worktable height 950mm-Automatic belt centering - Working width 1350mm - Thickness 3-165mm - Strips 2620x1365mm 1- Steel roller D=250mm - 30kw motor 2- Roller 90sh D=250mm - Motor 18.5kw 3- Roller 44sh D=220mm with skid - Motor 15kw Settings and position displays on each group - Selector for activation or deactivation of each group roller - belt feed motor with inverter 5.5hp - belt feed speed 3 to 18m/min - blower oscillation timed cleaning - vacuum device with 10hp fan - CE standards RRK Sup: motorized up/down glide with electronic thickness display - Fixed worktable height 950mm- Automatic belt centering - Working width 1350mm - thickness 3-165mm - belts 2620x1365mm 1- Steel roller D=250mm - 30kw motor 2- Roller 90sh D=250mm - Motor 18.5kw 3- Roller 44sh D=220mm with skid - Motor 15kw Settings and position displays on each group - Selector for activation or deactivation of each group roller - belt feed motor with inverter 5.5hp - belt feed speed 3 to 18m/min - blower oscillation vacuum device with 7.5 hp fan - elevating platform for in-line operation machine in working line: height 950mm - CE standards spare parts stock with additional roller

Condition: new, Year of construction: 2025, functionality: fully functional, grinding width: 1,350 mm, The JSM is an affordable all-round machine for small and medium-sized craft enterprises with high demands on surface quality. It is available in two sanding widths and three equipment packages. Depending on the package, it is ideally suited for solid wood, veneer, and lacquer sanding. - Sanding width: 1,100 or 1,350 mm - Feed unit with profiled conveyor belt - Feed speeds: 3 - 12 m/min - Variable working height via motorized height adjustment (maximum table height 880 mm) - Workpiece thicknesses: 3 - 160 mm - Pressure roller (Ø 50 mm) - Table extensions with non-driven rollers at infeed and outfeed (300 mm each) - 15.6" touch display (integrated) Dwedpfx Adswz Ignedsf - CSD pressure beam system (magnetic pressure beam) - Remote maintenance program - Sanding belt length: 2,150 mm, sanding belt width: 1,120/1,370 mm - EMS Energy Management System for energy-efficient machine operation - 1 emergency stop switch at the terminal, 2 emergency stop switches at the machine outfeed - LED lighting inside the machine (on the belt support side) - Terminal and belt support side on the left - Electrical version: 400 V, 50 Hz Advanced package additional features: - Vacuum table with pre-drilled holes for connecting the vacuum blower - Vacuum blower integrated within the machine - Workpiece cleaning with oscillating air nozzle - CSD pressure beam system (magnetic pressure beam) instead of the ACP system - Oscillating sanding belt discharge - Belt Manager software

Condition: reconditioned (used), Year of construction: 2008, functionality: fully functional, working width: 2,000 mm, overall weight: 14,000 kg, table height: 900 mm, Equipment: 1 working unit with calibration roller Dwjdpfxjwy Nxve Addef 1 working unit with segmented magnetic CSD pad controlled by CNC 1 working unit with segmented magnetic CSD pad controlled by CNC

Condition: like new (used), Year of construction: 2018, functionality: fully functional, working width: 1,300 mm, Equipped with: 1 transversal belt with CNC-controlled CSD magnetic pads, 1 longitudinal belt with 1 retractable descending roller + CNC-controlled CSD pad, 1 cleaning brush. Dodpfx Aswy Npuoddswf

Condition: reconditioned (used), Year of construction: 2006, functionality: fully functional, total width: 2,200 mm, total height: 2,400 mm, total length: 2,500 mm, working width: 1,300 mm, overall weight: 7,500 kg, working height: 900 mm, table height: 900 mm, power: 59 kW (80.22 HP), height adjustment type: electric, grinding belt speed: 1,400 mm/s, type of input current: three-phase, conveyor belt speed: 20 mm/s, grinding belt length: 2,640 mm, compressed air connection: 6 bar, table height adjustment: 120 mm, extraction nozzle diameter: 200 mm, power of feed motor: 4,000 W, Bottom calibrating sander for machine in production line, working width: 1300 mm, equipped with: 1 working unit: steel roller, motor: 37 kW; 1 working unit: roller, motor: 22 kW; dust cleaning brush. Dwedpjwy Nndjfx Addof