Used wide belt sanders 1300-1499mm working width for sale (125)

Condition: excellent (used), Wide Belt Sander VIET S1 213 Working width: 1300 mm Working height: 3–160 mm Rjdpfoyddurex Aamsn Number of units: 2 Calibrating roller: rubber-coated Combi unit with pad Main motor power: 15 kW (20 hp)

Condition: used, Kündig Premium-2 1350 RP Quality product from Switzerland Constant Table Machine / Automatic Head Positioning Wide-Belt Calibration & Fine Sanding Machine 1st Unit: Grooved Rubber Contact Roller, 80 Sh Contact Roller Level Infinitely Adjustable According to Grit Scale 2nd Unit: Pneumatic Sanding Pad Unit Abrasive Belt Drive Motor Power: 15 kW Working Width: 1350 mm Maximum Workpiece Pass-Through Height: 200 mm Feed Speed: 3 - 15 m/min, Infinitely Adjustable Automatic Workpiece Thickness Setting Redpex A T Epjfx Aamon ENORMATIC Quick Adjustment with Feed Activation (for long workpieces) PLC Control with Touch Screen and Teach-in Memory for Automation and Management of All Work Programs Infeed and Outfeed Tables with Roller Support Additional Foldable Outfeed Table Machine is KÜNDIG – FACTORY SERVICED First delivered in 2018 from training workshop / retirement Few operating hours Available ex stock Lieboch / Leasing option

Condition: excellent (used), Working width: 1,360 mm Workpiece thickness: 3 – 160 mm Abrasive belt dimensions: 1,360 x 1,900 mm Variable feed speed: 7 - 14 m/min Feed motor power: 1.1 kW, 400 V, 50 Hz Extraction port diameter: 2 x 160 mm Compressed air supply: 6 bar Dimensions (L x W x H): 2,160 x 2,260 x 2,025 mm Weight: approx. 2,200 kg 1st unit: Steel contact roller Motor power: 15 kW, 400 V, 50 Hz 2nd unit: Sanding pad, rigid for fine sanding of solid wood & pneumatically controlled (timed) for veneer sanding 3rd unit: Cleaning brush Abrasive belt oscillation with selector switch Feed conveyor oscillation pneumatic Rodpfx Aeych Igoamsn Motorized workpiece thickness adjustment with LED display Units equipped with emergency brake device Emergency stop button at infeed Roller table extension at infeed Complete documentation included Note – Used machines: • Subject to technical changes and prior sale. • Prices quoted are ex location – loaded on truck! • The machine has been cleaned and functionally tested. • All machines are sold as inspected, with no warranty or guarantee. Buyers are free to inspect the machines at the site. • Special agreements are only valid in writing. (We will only respond to inquiries that include your address and telephone number!)

Condition: excellent (used), Year of construction: 2008, Working width: 1100 mm Workpiece thickness: 3 – 160 mm Abrasive belt dimensions: 1,120 x 1,900 mm Variable feed speed: 2.6 - 13 m/min Feed motor output: 1.10 kW, 400 V, 50 Hz Extraction port diameter: 2 x 160 mm Compressed air supply: 6 bar Dimensions (L x W x H): 1705 x 1545 x 1905 mm 1st unit: Steel contact roller, diameter 160 mm Motor output: 15 kW, 400 V, 50 Hz 2nd unit: Combination unit with rubber-coated contact roller (Sh 65), rigid sanding shoe Motor output: 11 kW, 400 V, 50 Hz Abrasive belt cleaning via compressed air 3rd unit: Cleaning brush Redsychqzepfx Aamjn Multi-function display Multi-function lever (conveyor belt, workpiece thickness adjustment) Electronic belt oscillation Pneumatic conveyor carpet oscillation Motorized workpiece thickness adjustment with LED display in 0.1 mm increments Units with emergency braking system Emergency stop button at infeed & outfeed Motor protection switch Roller table extension at infeed with 2 loose rollers Automatic star/delta start Complete documentation Note for used machines: • Specifications and prior sale subject to change. • Stated prices are ex works – loaded free of charge! • The machine has been cleaned and functionally tested. • All machines are sold as seen, without any warranty or guarantee. Buyers are welcome to inspect the machine on site. • Special agreements are only possible in written form. (We only respond to inquiries providing your address and telephone number!)

Condition: excellent (used), Catalogue number 7871 TECHNICAL DATA - Maximum workpiece width: 1300mm - Maximum workpiece height: 170mm 2 sanding units: 1) Grooved rubber roller for calibration 2) Grooved rubber roller + segmented shoe + metal roller – From above: 2 pressure feed rubber rollers First unit: Rjdsx U Urqjpfx Aamen - Pressure rubber roller Second unit: - Pressure rubber roller - Cleaning brush - Pressure rubber roller – From below: - 3 slip rubber rollers - Conveyor belt - 3 slip rubber rollers - Pneumatic belt oscillation with photoelectric sensors - Electric table elevation - Pneumatic brake - Stepless feed speed adjustment via gear motor - Vacuum pump - Main motor: 15kW - Feed motor: 1.5kW - Pump motor: 4.6kW - Working pressure: 6-8bar - Extraction port diameters: 2x150mm, 2x80mm, 4x70mm, 120mm - Overall dimensions (L/W/H): 1700x2250x2400mm + pallet - Transport dimensions (L/W/H): 1700x2250x2140mm + pallet - Weight: approx. 2000kg ADVANTAGES – Made in Italy – 2 sanding units – Segmented shoe – Vacuum pump – Not repainted – Used sander, in very good condition Net price: 39,900 PLN Net price: 9,500 EUR (depending on the exchange rate of 4.2 EUR) (Prices may change with significant fluctuations)

Condition: excellent (used), Year of construction: 2002, functionality: fully functional, total height: 2,200 mm, total length: 2,750 mm, working width: 1,350 mm, grinding width: 1,350 mm, overall weight: 3,580 kg, grinding height: 160 mm, type of input current: three-phase, grinding belt length: 1,620 mm, workpiece width (max.): 1,350 mm, Wide Belt Sander VIET Challenge 323B – fully serviced, ready for operation. Specification: • Condition – used, comprehensive technical inspection and calibration performed • Manufacturer – VIET • Model – Challenge 323B • Working width – 1350 mm • Sanding thickness range – 3–160 mm • 3 sanding units: - First: calibrating drum, hard rubber - Second: rubber drum, lower hardness, with pneumatic engagement/disengagement - Third: soft rubber drum, with pneumatic engagement/disengagement • All drums: 240 mm diameter • Option to work with pneumatic engagement on the 2nd and 3rd drum, or in manual mode with constant height setting • Main motors: 2 x 11 kW • Machine operated via touchscreen panel with memory for various programs and settings tailored to requirements • Display shows machine error and fault messages • Continuously variable conveyor speed – variator • Electronic thickness gauge for sanded material • Cleaning air jets for sanding belts on 2nd and 3rd units • Reliable end-point belt oscillation • Conveyor in very good condition • Infeed and outfeed extension rollers • Digital thickness measuring device • Safety sensor preventing oversize material entry • Original factory paint • Abrasive belt size: 2620 x 1380 mm • 7 dust extraction ports • Weight: 3,580 kg • Year of manufacture: 2002 • Complete manufacturer’s documentation in Italian Rodpfxsx Nw Spe Aamjn • Overall dimensions: 270 x 225 x 220 cm (L x W x H) Additional information: • Excellent, factory-level technical and visual condition • Photos show the actual condition of the machine for sale • Possibility to power up and test the machine on site • Listed price does not include VAT or transport costs Financing and transport: • Transport can be arranged with MDD fleet, courier services, or external carriers • Financing support available via leasing or lease loan options

Condition: used, machine/vehicle number: 006385, Max. machining width: 1000 mm Rsdpfoybawkjx Aamsn Min. machining thickness: 3 mm Working Table: Fixed pass height No. Operating units: 2 Nr

Condition: like new (used), Working width 1350 mm The machine is in excellent, new condition as shown in the pictures. Rjdouuitgopfx Aamsn

Condition: good (used), Year of construction: 2020, functionality: fully functional, working width: 1,350 mm, Wide belt sanding machine for woodworking Manufacturer: Viet, Model: SV3-4.3 RVXR Year of manufacture: 2020 Technical Data Manufacturer: Viet Italia S.r.l. Model: SV3-4.3 RVXR Year: 2020 Belt width: 1350 mm Maximum working height: 160 mm Machine with adjustable head (fixed working height of 900 mm) Feed speed: 1.1 kW (1.5 HP) Speed: 0.5–7 m/min Calibration sanding unit, sanding drum diameter: 190 mm Belt length: 2620 mm Dimensions: approx. W 2.2 x D 3.5 x H 2.5 m (+ dust extraction) Rodeya Eyhopfx Aamjn Weight: 6.5 t (+ dust extraction) Features – Machine with movable head – Sanding belt change on the left side – Tool set – Digital thickness display – Material too strong at the infeed – Electropneumatic oscillation control – Air filter with condensate separator and automatic drain – Maintenance-free pneumatic system – Pneumatic lifting and lowering when switching sanding units on or off – Machine with head adjustment (fixed working height 900 mm) – Lifting system on 4 columns (spindle) with chain drive – Table extension front and rear, each with 1 roller – Industry 4.0 (LAN) package with LAN network connection – Centessimal lifting system with inverter – Electromechanical grit set – Belt speed adjustable via frequency inverter – V-Spin unit with 15-disc sanding system / diameter 80 mm The V-Spin unit consists of 15 disc brushes arranged in line and moving in opposite directions. The combination of both movements makes the V-Spin unit suitable for rounding sharp edges and removing slag or oxides. – 16 support plates for V-Spin unit, diameter 80 mm Scotch-Brite + abrasive, grit 80 – 16 support plates for V-Spin unit, diameter 80 mm Tampico + grit 80 – X-Spin unit / sanding system with 15 discs, diameter 123 mm Group consists of 5 rotary heads, each fitted with 3 rotating sanding brush pads, each diameter 123 mm – Oscillating Scotch-Brite brush – Linear cleaning systems – Conveyor belt Conveyor made of HYPALON rubber, heat and oil resistant, hardness 60 SH, smooth surface – Belt cleaning blower for the transport belt incl. extraction – IPC MONITOR 15" touch-screen control for machine operation, up to a maximum of 10 processing units – 2 Euro pallets filled with new sanding belts – Technical documentation including operating manual The control system manages the following processes: - Start sequence of selected drive motors - Storage of up to 1000 processing programs - Automatic positioning of thickness control - Acoustic and visual notifications at machine startup - Operating hours counter - Automatic control of feed speed depending on processing capacity (indicated in sqm). This functionality enables increased sanding belt lifetime through the use of statistics. Extraction Unit - Manufacturer: Ringler, Kärcher Group - Model: RE 36/110 D11 IE3 - Output: 11.0 kW - 2930 rpm - Connection: 400 V / 19.54 A / 50 Hz - Year: Dec 2018 - Weight: 754 kg All information without guarantee. A demonstration is possible anytime in our showroom.

Condition: used, Year of construction: 2008, Boere Select 1300 KC Widebeltsander (contactrol + combi) Description Number of sanding units: 2 Type of units: 1 contact and 1 combi aggregate Sanding width: 1300 mm Number of engines: 2 Throughput: 4-15 mtr./min Vacuum table: No Motor power: 15 kW Extraction diameter: 250 mm (Despite our great care all changes, mistakes in technical data, prices and all information is subject to (typing) errors. No guarantee on printed data! Availability subject to prior sales). (Alle Änderungen und Irrtümer in den technischen Daten, Angaben und Preisen vorbehalten! Keine Garantie auf gedruckte Daten!. Verfügbarkeit vorbehaltlich Zwischenverkauf). Prices excl. advertisement cost MachineSeeker / Preise exkl. Inserierungskosten MaschinenSucher Rodpfx Aaew Emwmomsn Best woodworkingmachines from the Netherlands Holland Die besten holzbearbeitungsmaschinen aus die Niederlande De beste gebruikte machines uit Nederland

Condition: ready for operation (used), Year of construction: 2023, functionality: fully functional, working width: 1,300 mm, workpiece height (max.): 140 mm, controller model: Xinje XD5, empty load weight: 4,500 kg, working length: 200 mm, TECHNICAL DETAILS 1st Station: 15 cup grinding brushes with quick-change mount 2nd Station: 15 cup grinding brushes with quick-change mount 3rd Station: 9 tangentially arranged grinding brushes 4th Station: Crosswise roller with grinding brushes over the entire working width 5th Station: Crosswise roller with grinding brushes over the entire working width 6th Station: Air nozzle across the entire working width Redox Tt Uujpfx Aamen Working width: 1,300 mm Working length: 200 mm Workpiece height: 3 - 140 mm MACHINE DETAILS Control system: Xinje XD5 Total power requirement: 13.4 kW Dimensions & Weight Required floor space: approx. 5.1 x 2 x 2.3 m Machine weight: approx. 4,500 kg EQUIPMENT Modular control of the module units Frequency converter for speed control Automatic adjustment of working height range Oscillating blowing air in the final section Easy maintenance and replacement of abrasive paper and brushes Spare brushes Grinding inserts Rubber conveyor belt with herringbone pattern, solid steel plate underneath across full width

Condition: ready for operation (used), Year of construction: 2001, Ott Deltatronic Wide Belt Sander €9,500.00 excl. VAT Ott Deltatronic Magelis control system Sanding thickness: 3-160 mm Sanding width: 1350 mm 3 units Lacquer sanding package Vacuum Satin finishing brush Cleaning brush Rodjyatgiopfx Aamsn Pneumatic slider Year of manufacture: 2001 Condition: Fully functional

Condition: new, DMC SD 90 RCS 135 "C-Plus" version Technical specifications: Useful working width mm 1350 min/max Working height (with fixed table) mm 4 – 200 Abrasive belts mm 1,370 x 2,620 Feed speed m/min 3.5-18 working aggregates: “MESAR 46” 46 sectors (30 mm) flexible electronic link sanding pad complete with B/46 workpiece sensing bar in the infeed • 1st position: "RA" diagonally ribbed steel contact roller D=250 • 2nd position: COMBI with rubber-coated grinding roller D=175 mm 65 Sh • Floating pressure shoe in 1st position with pneumatic adjustment • 2 grooved rubber coated pressure rollers 2nd and 3rd position • Oscillating blow-off device 1st and 2nd unit • Workpiece cleaning unit with rotating blast nozzles • Motor 1st unit 18.5 kW • Motor 2 with inverter 15 kW Table: • Fixed table working height 900 mm • Infeed roller table for long workpieces • Outfeed roller table for long workpieces • Perforated table and transport carpet 50 Sh • Vacuum table with 4 kW electric fan integrated in the machine frame • Stepless carpet feed from 3.5-18 m/min (gear motor 0.75 kW) Control: • Electronic programming unit "Pro-Sand" • Touch screen 10.4" screen • Door with viewing window on set-up side for machine with 2 working units • LED interior lighting Rjdpfjd E Ixzjx Aamsn Advise used machines: • Technical data without obligation, mistake and intermediate sale reserve. • Price is considered ex-location price • All articles or machines are bought as seen without any entitlement on warranty. • It is left to the choice of the buyer to view the machines before at its location. • Special arrangements are possible but only valid in written form. (We answer your inquiries only with stated address + telephone number!)

Condition: used, Year of construction: 1998, Used machine Year of manufacture: 1998 1 Belt sanding machine with combination unit with electronic segmented pressure beam for sanding of soft and hard veneers Calibrating and fine sanding of solid wood Calibrating workpiece carrier boards Sanding of defective veneers and coatings Intermediate sanding of PU, hydro, UV, nitro, and polyester lacquers Sanding of blocking foils with graphical control terminal NC-controlled thickness adjustment from 3-150 mm Calibration roller can be switched on via terminal Rodpfx Aox Rpghjamsn with patented CSD segmented pressure beam to compensate for workpiece tolerances up to 2 mm Sanding width: 1350 mm Abrasive belt length: 2150 mm Abrasive belt speed, frequency controlled: approx. 2-18 m/sec Motor power (sanding unit): 15 kW Feed speed: 5/10 m/min Compressed air: 6 bar Compressed air requirement: 15 NL/min with belt cleaning air blast: 490 l/min Extraction port: 180 mm Air requirement sanding unit: 1800 m³/h Required air speed: 20 m/sec Total power connection: approx. 17 kW Weight: approx. 2500 kg Dimensions (WxDxH): 2090x1670x2020 mm Availability: short notice Location: Röllbach

Condition: new, Technical data: Working width mm 1.350 Min./max. working height mm 4 - 170 grinding belt width/ length mm 1.370/ 2620 Main motor power kW 15,0 with inverter Feed speed variable m/min 3,5 - 18 Redpjhtuvrjfx Aamen Working aggregates: 1st unit: "RA" inclined ribbed steel contact roller diameter 160 mm 2nd aggregate: Combi: rubber coated grinding roller diameter 160 mm, 45 Sh Elastic electronic link sanding shoe "MESAR" with 24 segments Version C: - Elastic electronic sanding shoe "MESAR" complete with: - Pneumatic cylinder (On/Off) for the automatic on/off of the sanding roller sanding shoe unit - Activation of the sectors by the electronic control which synchronizes their insertion with the feed speed and controls the number of sectors according to the workpiece geometry. and allows the selection of more or less sectors on the left and on the right side of the workpiece. Versions 135: "MESAR 24" with 24 segments, segment width 55 mm, complete with B/24 workpiece scanning bar in the infeed. Other equipment: Roller table in infeed and outfeed for long workpieces Perforated table and transport carpet Vacuum table with electric fan 4 kW (5,5 PS ) integrated in machine frame Oscillating blow-off device 2nd unit Touch screen 10,4" screen with 'eye S software integration ATTENTION: PICTURES are EXAMPLE PICTURES OF A SIMILAR SD70!

Condition: new, Year of construction: 2026, Automatic sanding machine KÜNDIG PERFECT-3 1350-REdXi_LL/Bs incl. structure unit Robust 3-belt sanding machine for the highest demands Constant working height thanks to top section adjustment Working width 1350 mm Passage height max. 205 mm (up to 18.5 kW main drive motor) Sanding belt dimensions for "R" and "Ed-L": 1350 x 2000 mm Sanding belt dimensions for "Xi-L": 150 x 4700 mm Unit "R" contact roller ➢ Grooved rubber contact roller hardness 80 Sh ➢ Contact roller level infinitely height-adjustable via touch screen ➢ Motorized lifting/lowering of the contact roller according to unit selection ➢ Increased sanding belt speed Unit "Ed-L" sanding pad diagonal ➢ Electronic sanding pad with segment width 22 mm (swiveling special version), with variable edge pressure, automatic pressure control and storage of the sanding pad segments ➢ Infinitely variable sanding belt speed (with PLC storage) ➢ Additional sanding pad insert "Xi-L" cross sanding unit in the machine frame Electronic sanding pad with segment width 22 mm with variable edge pressure, automatic pressure control and storage of the sanding pad segments ➢ Cross sanding belt supported by lamellar belt ➢ Infinitely variable sanding belt speed (with PLC storage) Perfect-3 1350-REdXi-LL - Main motors ➢ 1st unit: 18.5 kW (25 hp) / ➢ 2nd unit: 11 kW (15 hp) / ➢ 3rd unit: 16 kW (MPM) (22 hp) / 400 V/50 Hz 400 V/50 Hz 400 V/50 Hz - Workpiece feed ➢ Fabric-reinforced rubber transport carpet ➢ Rubberized carpet drive roller ➢ Motor: 2.2 kW (3 HP) / 400 V/50 Hz Redpor Hr Dzefx Aamon ➢ Speed: infinitely variable 3 - 15 m/min - Vacuum device ➢ On feed table ➢ Additional perforation of the transport carpet over 200 mm ➢ Vacuum generator: 2.2 kW (3 hp) / 400 V/50 Hz - Sanding belt cleaning ➢ Air blade for sanding belt cleaning of the two units "Ed-L" and "Xi-L" insert-controlled, with suction ducts and driven by blower 1.1 kW (1.5 HP) 400 V/50 Hz - Pressure elements ➢ Inlet: ➢ Intermediate units: ➢ Outlet: parallel spring-loaded, ground steel pressure roller ⌀ 50 mm rubberized pressure roller ⌀ 50 mm Rubberized pressure roller ⌀ 50 mm 1. grooved rubber contact roller, 80 sh. 2.diagonal sanding pad with lacquer finish and air blade for sanding belt cleaning 3.cross sanding unit with lacquer equipment and air blade for sanding belt cleaning Main motors: 18.5 + 11 + 16 kW / 400V / 50 Hz Additional equipment: W61: Structuring burr at the outlet B 10: Structuring brush Abralon, Mink W71: Additional quick-change shaft for brush 1350 B 12: Brass-plated steel wire brush 1350 C 10: LED package A 20: 5 x motorized regulating flaps (2x D=180 + 3 x D=150) Working width 1350 mm Max. passage 205 mm Sanding belt dimensions: 1350x2000 mm and 150x4700 mm 10" touch screen with Industry 4.0 control Location: ex stock 54634 Bitburg - immediately available -

Condition: excellent (used), Year of construction: 1994, functionality: fully functional, Costa Planing Machine High-Performance Profiling Planer – Processing Centre with 10 spindles, used exclusively for processing spruce wood. Technical Features: Rjdpfxex N D Rrs Aamon - Working width up to 300 mm - Multi-stroke spindle system for flexible profiling and dimensional processing - Feed rate: 140 m/min to 200 m/min - NC control for precise, repeatable set-up and processing operations - All spindles equipped with support bearings (hydraulic clamping) for smooth operation, dimensional accuracy, and surface quality - Planing table in perfect condition, showing no signs of wear or damage - Precision work in terms of dimension and angle across the entire working width - The machine is in technically flawless condition and operates precisely and reliably. Spindle Configuration: - Horizontal spindle - Lifting spindle right, vertical - Lifting spindle left, vertical - Lifting spindle horizontal - Lifting spindle right, vertical - Lifting spindle left, vertical - Spindle top, horizontal - Spindle bottom, horizontal - Spindle bottom, horizontal - Levelling spindle bottom, horizontal This spindle arrangement enables complete machining of workpieces in a single pass with high dimensional accuracy and excellent surface quality.

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, Technical Main Data - Grinding width: 1,350 mm - Working height: 900 mm (constant) - Workpiece thickness: max. 150 mm - Abrasive belt width: 1,370 mm - Segment grinding shoe - Weight: approx. 3,000 kg Drives 1st unit: 15–18.5 kW, belt speed 18 m/s 2nd unit: 11–15 kW, belt speed 18 m/s Contact roller diameter: 140 mm (combi unit) Feed: Rodpfxexmwn Ao Aamsn - Feed belt system: length 3,400 mm, width 1,350 mm - Feed drive: 0.7/0.9 kW (2 speeds) - Feed speed: infinitely variable, 2.5–13 m/min Extraction - Air velocity: min. 20 m/s - Machine resistance: approx. 800 Pa Compressed Air: - Operating pressure: 6–8 bar - Air consumption: approx. 28 l/min

Condition: used, Year of construction: 2006, lower grader with 2 lower belts RR 1300 2 lower rollers upper grader with 2 upper belts RR 1300 2 upper rollers Rsdpfsycxwfjx Aamjn

Condition: excellent (used), Year of construction: 2002, functionality: fully functional, machine/vehicle number: 4607269, total width: 2,100 mm, total height: 2,400 mm, total length: 2,830 mm, working width: 1,350 mm, grinding width: 1,350 mm, overall weight: 2,850 kg, grinding height: 160 mm, power: 22 kW (29.91 HP), height adjustment type: electric, type of input current: three-phase, conveyor belt speed: 20,500 mm/s, grinding belt length: 2,620 mm, workpiece height (max.): 160 mm, pass-through height: 160 mm, compressed air connection: 6 bar, grinding belt width: 1,380 mm, table height adjustment: 157 mm, power of feed motor: 1,500 W, input frequency: 50 Hz, air demand: 1 m³/h, input voltage: 400 V, operating pressure: 6 bar, workpiece width (max.): 1,350 mm, 🪵 2002 Viet Challenge 223 Wide Belt Sander – Heavy-Duty Finishing, Very Good Condition Take your wood finishing to the next level with this 2002 Viet Challenge 223 Wide Belt Sander – a high-performance sanding solution for woodworking professionals. Built in Italy for precision and durability, the Viet Challenge 223 is trusted by cabinetmakers, joiners, and production workshops across Europe. Now available in very good condition, this twin-head sander offers consistent results on solid wood, veneered panels, and composite materials – ideal for both calibration and fine finishing. ✅ Key Features – Viet Challenge 223/20 Year of Manufacture: 2002 Condition: Very good – clean, well-maintained, fully operational Sanding Heads: 2 (roughing + finishing) Working Width: 1,350 mm Redswnr A Hspfx Aamen Working Thickness: 3 – 160 mm Minimum Workpiece Length: Approx. 400 mm Abrasive Belt Dimensions: 1,380 mm x 2,620 mm Main Motor Power: 11 kW + 11 kW (approx.) Feed Speed: Variable, 3.7 to 20.5 m/min Powered Height Adjustment Emergency Stop and Safety Features Feed Motor: 1.5kW Lifting Motor: 0.37kW Suction Speed: 25m/s Compressed Air: 6 bar Air Consumption: 17 l/min Machine Dimensions: 2830 x 2100 x 2400mm Machine Weight: 2850kg 🧱 Ideal For: Solid wood panel calibration Veneered panel sanding MDF and composite board finishing Flat panel furniture components General wood surface preparation and finishing 📦 Machine Includes: Viet Challenge 223 main sanding unit Twin sanding heads for combined roughing & fine finish Integrated feed table and dust extraction ports Original manuals and safety guards Fully tested and ready for operation 📍 Availability & Delivery This machine is in stock and available for immediate inspection and delivery. Shipping support available throughout Ireland, UK, and Europe. 📞 Enquire Now Looking for a dependable wide belt sander with professional-grade features? This Viet Challenge 223 is a rare find at this price and condition. Viet Challenge 223 Wide Belt Sander for sale Used wide belt sander in very good condition Heavy-duty industrial sander for woodworking Woodworking sanding machine for panels Twin-head wide belt sander for solid wood Viet wide belt sander UK / Ireland / Europe Wide belt sander for furniture and cabinetry production

Condition: used, Wide belt calibrating sander Manufacturer: Viet Spa Italia Model: PL ICCC Year: 1995 Rjdpfx Aox N T Efoamon Power: 54 kW Air pressure: 5–8 bar Weight: 6200 kg

Condition: ready for operation (used), Year of construction: 1994, Wide Belt Sander HEESEMANN KSM 8 CSD incl. EA2 Year of manufacture: 1994 Condition: used – ready for operation Rodpfxjx N A Aao Aamen Description Wide belt sanding machine Condition: function-tested – Working width 1300 mm – Cross sanding unit with belt air-jet cleaning device – Longitudinal sanding unit with steplessly adjustable speed and belt air-jet cleaning device – Calibrating roller, controllable via control panel – Vacuum conveyor belt – feed speed steplessly adjustable – Satin finishing roller – Brush roller – Machine settings and pressure regulation system CNC-controlled - EA dedusting unit, high-pressure air-blast installation with rotating nozzles and ionization for statically charged dust Location: ex customer site - Immediately available - Machine must be dismantled by the customer

Condition: like new (used), Year of construction: 2019, functionality: fully functional, New wide belt sanding machine for wood panels (including dust extraction) Rsdpfx Asxxlz Uoamen

Condition: excellent (used), Year of construction: 2006, BOERE Sandrite 1100 KC Sanding machine. Year of Manufacture - 2006. Machine is in excellent working condition. £8,450 + VAT Ex-Works. 2 x Main motors. Pneumatic belt tension. Maximum Workpiece: 150mm Belt size: 1110 x 1900mm Feed Speed: 4.4M/Min Variable upto 12M/Min Hard Robber roller on first head, In great condition. (Calibration). Combi Second Head, Soft Roller & Pneumatic Pad. (Solid Wood finish). Rsdoya Ilajpfx Aamon Machine is connected and in excellent condition available for any demonstration. Comes with a selection of spare belts

Condition: good (used), Year of construction: 2008, functionality: fully functional, HESSEMANN 3-HEAD SANDER: Abrasive belt dimensions: 2,620 x 1,400 mm 1 Longitudinal sanding unit (with contact roller for calibration work (steel)) Roller diameter: 250 mm Belt speeds: approx. 18 m/s Rodpex Rdn Tofx Aamjn 22 kW Anti-wear braking unit, automatic band length adjustment Dust extraction system controlled depending on the workpiece, counter-rotating abrasive belt, abrasive belt grit compensation by computer Belt speeds: 1.0 - 18 m/s Drive: 15 kW 1 Longitudinal sanding unit Belt speeds: 1.0 - 18 m/s Drive: 15 kW Includes continuously adjustable sanding speed via electronic frequency inverter, with double number of extraction holes for the dust extraction device. Anti-wear braking unit, automatic band length adjustment for abrasive belt edges potentially of different lengths; dust extraction controlled by workpiece detection, deactivatable, counter-rotating abrasive belt. 2 Pressure beams with selective pressure adjustment system – CSD® system Continuously adjustable individual pressure elements, for single and multiple workpiece feeding. Spacing: 32 mm. Tolerance compensation for workpieces up to 2 m by maintenance-free pressure magnets. Working width as well as start and end positions of the pressure beam are electronically adjustable. The pressure elements are driven by lifting electromagnets capable of continuously varying the force of each sanding pad as the workpiece passes through the machine. This innovative CSD® technology guarantees constantly proportionate pressure relative to pad overlap on the workpiece. The risk of sanding through on the edges is virtually eliminated by this dynamic, continuous pressure force control.