Year of construction: 2026, condition: new, max. tool diameter 400 mm 0 180 mm operating pressure 2 bar ROTATHERM chamber washing systems are used in all areas of industry and Craftsmanship for cost-effective cleaning of a wide variety of items to be cleaned and materials used. The parts are cleaned like in a dishwasher. Inserted into one Wire mesh basket they are in the closed device with a hot Lye shower washed from all sides. The machine will be selected after the Temperature and washing time set in operation. A centrifugal pump promotes the Washing water circulates to the nozzle system, which at the same time moves the basket in offset rotation. (Optional electric basket drive) After the cleaning process is complete, the device switches off automatically. the Parts can also be removed beforehand. In this case, when lifting the the pump is automatically put out of operation. ROTATHERM chamber washing systems are available in various sizes and at short notice Designs are available and can be requested on special claims be modified. As a rule, water-based cleaners are used deployed. But solvents are also used in ours cleaning machines. If necessary, the systems can be ex-protected version are delivered. Technical details EMSA ROTATHERM Mini: ----- Basket diameter: 400 mm Usable height: 180 mm Load capacity: 50kg Spray pressure without / with filter: 1.5 / 2.3 bar Circulation volume: 2.5 m³/h Tank capacity: 35 l Heating power: 2 kW Ihjdpfxeyrtyte Abcew Connected load: 2.5 kW Voltage: 220/230V Frequency: 50Hz Dimensions ----- Depth: 530mm Width: 650mm Height: 630mm Weight: 48kg ----- Price of the basic machine in the above design: On request! ----- Accesories: ----- Order No.: 1.521 Raised lid/max. Tool length 310 mm Order No.: 1.522 HSK 63 F tool holder for changing with basket Order No.: 1.523 HSK 63 E tool holder for changing with basket Order No.: 1.524 Tool holder for Weinig Powermat to change with basket Order number: 2.006 small parts basket, Order number: 1.504 filter system (0.08m²), Order number: 1.510 pressure gauge, Order No.: 1.511 Electromotive basket drive, Order number: 1.512 mobile frame, Order number: 1,513 rolls, Order number: 1.514 suction device, Order number: 1.516 oil separator / belt skimmer, Order number: 1.518 system completely in stainless steel, Order number: 1.519 nozzles in stainless steel, ----- Price on request The ROTAHTERM tool washing machine is also available in larger versions Standard, Maxi and XL available. All devices are also available in special voltages. Surcharge on request. When ordering accessories, the specified technical data and possibly the delivery time! The values ??given are guide values. Construction changes reserved. Delivery time: short term and after Agreement. All prices ex works plus packaging, transport, insurance and legal VAT. (technical information according to the manufacturer - without guarantee!)

Condition: used, Year of construction: 2004, Tenoning spindle 2 St. Number of milling agregates 7 St. Spindle diameter 50 mm control CNC, Weinig PC-Nexus Weinig Uncontrol 12 with radial and axial CNC spindles and VARIO table ..... The machine has already been professionally dismantled and stored in 73447 Oberkochen Specifications summary (please inquire about any additional accessories included) ..... crosscut saw ..... > Crosscut saw electronically, horizontally infinitely adjustable > Number of tools: 1 pc. > Spindle speed: 3000-6000 rpm > Spindle diameter: 40 mm > Tool diameter max.: 400 mm > Motor power: 3.7 kW > Laser guide light for detecting the sawing section > Axial adjustment path 150 mm NC axis, electronically stepless > Adjustment path, radial, pneumatic, 8 positions, e.g. for edge rounding from above rounding aggregate ..... > Position: horizontally below > Axial adjustment path together with the crosscut saw. electronic length stop ..... > Length 4500mm 1. Tap and Slot Spindle ..... > Number of tools: variable > Motor power: 15 kW > Spindle diameter: 50 mm > Tool clamping length: 640 mm, with counter bearing > Axial adjustment range: 580 mm NC axis, stepless > Spindle speed: 2,800-4,000 rpm > Tool diameter: 380-400mm > Overrun counter, complete clamping length is countered 2. Tap and Slot Spindle ..... > Number of tools: variable > Motor power: 15 kW > Spindle diameter: 50 mm > Tool clamping length: 640 mm, with counter bearing > Axial adjustment range: 580 mm NC axis, stepless > Spindle speed: 2,800-4,000 rpm > Tool diameter: 380-400mm > Overrun counter, complete clamping length is countered transfer tape ..... Included for transferring the parts to longitudinal processing Separation of double parts before entering longitudinal processing. 1. Profiling spindle (synchronous and counter-rotating) ..... Ihedpfx Abjyrtzkscjw > Position: vertical right > Number of tools: variable > Motor power: 11 kW > Spindle diameter: 50 mm > Tool clamping length: 400 mm, with counter bearing > Axial adjustment range 350 mm NC axis, stepless > Radial adjustment range 80 mm NC axis, stepless > Spindle speed: 6000 rpm > Minimum tool flight circle: 140 mm > Tool flight circle max.: 232 mm 2. Profiling spindle ..... > Position: vertical right > Number of tools: variable > Motor power: 11 kW > Spindle diameter: 50 mm > Tool clamping length: 400 mm, with counter bearing > Axial adjustment range 350 mm NC axis, stepless > Radial adjustment range 80 mm NC axis, stepless > Spindle speed: 6000 rpm > Minimum tool flight circle: 140 mm > Tool flight circle max.: 232 mm 3. Profile milling unit (grooving device from above) ..... > Position: horizontally above > Motor power: 3.0 kW > Spindle diameter: 40 mm > Tool clamping length: 40 mm > Axial adjustment range 30 mm NC axis, stepless > Radial adjustment range 125 mm NC axis, stepless > Spindle speed: 9000 rpm > Tool flight circle max.: 130 m...

Condition: excellent (used), Working width ca. 2.600 mm Working height ca. 1.450 mm Isdpeyrt Abofx Abcehw Number of cylinders 6 St. down holder 3 St. Stable hydraulic hole press, hole plate press, or gluing press for gluing or fixing workpieces such as frames, panels, windows, or doors.

Condition: new, Year of construction: 2026, Working width 4500 mm Working height 3000 mm Number of cylinders 6 St. Dimensions (L/W/H) 5500x1400x3550 mm Weight 3000 kg S&S frame press Bavaria 2000 L, built 2026 ----- SHORT TIMED availabe exw warehouse Engelfried, 73447 Oberkochen NEW for the Holz-Handwerk 2026 trade fair in Nuremberg: Now also with semi-automatic positioning of the vertical press cylinders 1, 2, and 3 via enabling switch, including ON/OFF selector switch for beam 2 With automatic pressing cycle + manual control for corner connections tenon+slots and dowel connection/mortised tenon, can be switched using a selector switch on the control cabinet. With basic equipment for optional use of counter profiles if the sash is rebated on the loose part. CE version Basic machine in the strongest frame welded construction, with thick-walled special hollow profiles. Guideways of the pressure beams for the press corners in a low-abrasion machined version. Fast, smooth, manual width adjustment using ball-bearing carriage, fixing in 50 mm hole grid, optional motorized width adjustment with Ihodpfxjwg Hr To Abcsw hydraulic clamping (at an additional cost). Height adjustment and pressing using long-stroke cylinders in one work cycle. Right-hand press corners with integrated horizontal cylinders, therefore no vertical positioning of the horizontal pressure cylinders is necessary, which avoids cylinder collisions. Lower support can be adjusted in several positions to the most suitable insertion height. 3 KW compact hydraulic system with integrated control block, variable pressure control from 20 - 120 bar, pressure gauge Control via touch button with separate control circuits for the vertical and horizontal press cylinders, mounted on a freely movable control panel. 2 vertical press cylinders, double-acting, stroke adapted to working height, piston diameter 60 mm Pressure force per cylinder max. 2100 kg 2 horizontal press cylinders, double-acting, 80 mm stroke, piston diameter 40 mm Pressure force per cylinder max. 1250 kg Abutment and pressure plate depth 100 mm Control cabinet on the machine base on the left, 400 volts, 50 Hz Machine with ready-to-connect plug 16 A Paint: RAL 7035 light gray with RAL 7016 anthracite gray Working size: length x height = 4,500 mm x 2,750 mm Note: Actual working size: 4,500 x 3,000 mm (length x height) Space required: 5,500 mm x 1,400 mm x 3,550 mm (LengthxWidthxHeight) Article medium pressure bar complete with pressure cylinder, pressure hose and shut-off valve up to 2,750 mm high Note: actual working height: 3,000 mm Article Individual pressure control for medium pressure bar, pressure control range up to max. 100 bar (For pressing cross-bar windows) Article infinitely height-adjustable cross pressure device, complete with pressure cylinder and abutment, throttle and shut-off valve Article Individual pressure control for cross pressure device pressure control range up to max. 100 bar (For pressing cross-bar window) Article Shut-off valve on the 3rd vertical cylinder Article Shut-off valve on the upper horizontal cylinder Article Shut-off valve on the lower horizontal cylinder ...

Condition: excellent (used), Catalog number 7382 TECHNICAL DATA Tenoning carriage: - Electric feed with stepless speed adjustment - Carriage adjustable at an angle - Feed motor: 0.46 kW - Table size (L/W): 700x450mm, extendable to 1150mm - Cross fence on carriage – cutting length on extendable telescope: 1860mm - Rotary block in the fence - 2 pneumatic clamps Crosscut saw: - Max blade diameter: 380mm - Max cutting height: 110mm - Blade adjustable up/down, forward/backward, and at an angle - Blade guard - Saw motor: 2.2 kW Tenoning spindle: - Pneumatic spindle stroke - Spindle up/down and stroke adjustment via handwheels - Max tool diameter: 320mm - Spindle diameter: 40mm - Working spindle height: 220mm - Spindle lock - Motor: 7.5 kW Profiling spindle: - Pneumatic spindle stroke - Spindle up/down and stroke adjustment via handwheels - Max tool diameter: 200mm Ihjdpfx Abjymm Nqocjw - Working spindle height: 220mm - Spindle diameter: 54mm - Spindle lock - Extendable table support - Motor: 7.5 kW Glazing bead saw: - Max blade diameter: 200mm - Blade bore: 30mm - Blade adjustable forward/backward, up/down - Blade guard - Motor: 2.2 kW Feed unit: - Number of rollers: 8 pcs - Motor approx. 0.55 kW - Roller size: 110x50mm - 8 feed speeds: 4, 6, 8, 10, 12, 15, 20, 30 m/min - Extraction port diameters: 60mm, 2x130mm, 110mm, 100mm - Operating pressure: 6-8 bar - Dimensions (L/W/H): 3600x2100x1600mm, weight approx. 2500kg FEATURES – For window production – Pneumatic spindle stroke – Carriage with electric feed – Crosscut saw – Tenoning spindle – Not repainted, used machine, in very good condition Net price: 27,900 PLN Net price: 6,640 EUR (based on the exchange rate of 4.2 PLN/EUR) (Prices may change with significant currency fluctuations)

Condition: used, Year of construction: 2004, operating hours: 3,142 h, total width: 2,400 mm, total height: 2,100 mm, Empty weight: 5.000 kg Dimensions (LxBxH): 550 x 240 x 210 cm Price: On request - Year: 2004 - Documentation available: No - CE certificate present: No - Serial number: 102848 - Operating hours: 3142 - Number of spindles [pcs.]: 7 - └ Spindle 1: - - Spindle type: Bottom - - Motor power [kW]: 15 - - Tool present: Yes Iodpfx Aeyr Rm Robcohw - └ Spindle 2: - - Spindle type: Right - - Motor power [kW]: 11 - - Tool present: Yes - └ Spindle 3: - - Spindle type: Left - - Motor power [kW]: 11 - - Tool present: Yes - └ Spindle 4: - - Spindle type: Top - - Motor power [kW]: 22 - - Tool present: Yes - └ Spindle 5: - - Spindle type: Bottom - - Motor power [kW]: 15 - - Tool present: Yes - └ Spindle 6: - - Spindle type: Top - - Motor power [kW]: 30 - - Tool present: Yes - └ Spindle 7: - - Spindle type: Bottom - - Motor power [kW]: 15 - Min. planing width [mm]: 20 - Max. planing width [mm]: 300 - Min. planing height [mm]: 3 - Max. planing height [mm]: 160 - Feed table length [mm]: 1000 - Feed roller diameter [mm]: 140 - Conveyor drive: Cardan drive - Lubrication system: Automatic - Diameter extraction nozzle [mm]: 160 - Options: Powered rollers in table, Powerlock - Feed speed: Manual - └ Min. feed speed [m/min]: 5 - └ Max. feed speed [m/min]: 33 - └ Feed speed control: Continuously adjustable - Voltage [V]: 400 - Current consumption [A]: 278 - Fuse [A]: 400 - Power [kW]: 128.0 - Transport dimensions: 5500mm x 2400mm x 2100mm (l x w x h) - Transport weight [kg]: 5000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: excellent (used), CATALOG NUMBER 5503 TECHNICAL DATA - 2.2kW motor - Power supply: 380V - Dimensions (LxWxH): 1870x1050x1220mm - Weight: 846kg Machine equipped with: - 2 work tables with angle stops, size 380x330mm - Pneumatic clamps - Tables adjustable in two planes - Capability to mill both longitudinal and round tenons on the tables Ihsdpfsymd T Tox Abcsw - Tables adjustable up/down - Adjustable tenon width - Central lubrication - Unpainted - Italian-made - Two work stations - Pneumatic operation - Robust machine Net price: 18,900 PLN Net price: 4,500 EUR Net price calculated at the exchange rate of 4.2 PLN/EUR (In case of significant currency fluctuations, the price may change)

Condition: used, Year of construction: 2006, Empty weight: 5.000 kg Price: On request - Details: - └ Description: Currently not working, problem with 7th-spindle sensor - Year: 2006 - Documentation available: No - CE certificate present: No - Serial number: 105364 - Number of spindles [pcs.]: 7 - └ Spindle 1: - - Spindle type: Bottom - - Motor power [kW]: 11 - - Tool present: Yes - └ Spindle 2: - - Spindle type: Right - - Motor power [kW]: 11 - └ Spindle 3: - - Spindle type: Left - - Motor power [kW]: 11 - └ Spindle 4: Iodpfxeyr Ntcj Abcshw - - Spindle type: Top - - Motor power [kW]: 18.5 - - Tool present: Yes - └ Spindle 5: - - Spindle type: Bottom - - Motor power [kW]: 11 - - Tool present: Yes - └ Spindle 6: - - Spindle type: Top - - Motor power [kW]: 18.5 - - Tool present: Yes - └ Spindle 7: - - Spindle type: Bottom - Min. planing width [mm]: 15 - Max. planing width [mm]: 231 - Min. planing height [mm]: 3 - Max. planing height [mm]: 161 - Feed table length [mm]: 1000 - Feed roller diameter [mm]: 140 - Feed motor [kW]: 7.5 - Conveyor drive: Cardan drive - Lubrication system: Automatic - Diameter extraction nozzle [mm]: 160 - Options: Powerlock, Powered rollers in table, Automatic feeding system - Feed speed: Automatic - └ Min. feed speed [m/min]: 6 - └ Max. feed speed [m/min]: 36 - └ Feed speed control: Continuously adjustable - Feeding system: - └ Brand: Weinig - └ Type: E-1/L - └ Max. feed length [mm]: 5000 - └ Max. feed width [mm]: 230.5 - Voltage [V]: 400 - Current consumption [A]: 242 - Fuse [A]: 315 - Power [kW]: 112.0 - Transport weight [kg]: 5000kg - Transport packages [pcs.]: 2 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of construction: 2001, Automatic tenoner 1 saw with diameter 500mm 2 plate-type spreaders 2 cups with diameter 40mm Pneumatic pressers Automatic carriage advancement Digital display Ihsdpeyr Ri Sefx Abcew Speed variator Total power 35 kW 400V Weight 3500kg

Condition: used, Number of sanding units 4 St sanding width 190 mm Sanding height max. 4-180 mm weight 4200 kg Hess Expert 4-belt single wood sanding machine machine will be checked by our technicians ----- Ø Grinding at the bottom/top Ø With 2 offset grinding units each (bottom and top) Ø Grinding units (bottom and top) connected in series according to the Dressing principle Ø Pre-sanding with coarse grit (calibrate) Ø Regrinding with fine grit (finish) Ø Central motorized height adjustment of the lower grinding units Ø Central motorized and synchronous height adjustment of the entire upper Grinding and brushing units including the upper transport units Ø Oscillating sanding belt utilization (during the sanding process) Ø Absolute power connection thanks to 5.5 KW motors and large dimensions drive drums Ø Oxide ceramic grinding shoe for - exact surface geometry - no adjustment work - permanent dimensional accuracy - completely maintenance and wear-free Basic structure: Stable, heavy welded construction made of strong-walled rectangular profiles additional, statically calculated reinforcements for optimal Vibration dampening. Staggered grinding units with large dimensions Belt drive drums for slip-free belt running. Two-point suction for direct and flying dust with sealing brushes and integrated sanding belt blow-off Device to increase the service life of the sanding belts. Grinding units in heavy steel plate construction as the basis for vibration-damped, quiet tape running. Absolutely backlash-free guides as ball linear sets hardened and ground shafts. Height adjustment of the grinding units via hardened and ground special linear guides as well as pre-tensioned ones Guide carriage. Permanent precision thanks to dust and dirt protection Ball linear sets and guide carriages. Large-sized pre-grinding rollers as contact rollers. Contact rollers and Sanding shoes in a balanced ratio to the sanding belt grain load. The large drive drums guarantee full transmission the 5.5 kW drive power of the grinding motors on the sanding belt. Therefore Slip-free, stable running and optimal heat dissipation. This makes it the Ijdpfxjt Tqy Es Abcehw strongest Chip removal possible. Automatic machine stop activation in the event of a belt break. Visual display on the control panel and via flashing lights on the machine. Sanding shoes for finish completely maintenance-free and wear-free made of oxide ceramic with optimal heat dissipation. Grinding belt tension via appropriately sized compression springs. Sanding belt relaxation for belt changing using a pneumatic device sensitive, distortion-free placement of new tapes. Upper grinding unit and brush device centrally motorized Height adjustable with digital display in the control panel for the motorized Grinding thickness adjustment. Brushing and finishing device, for better surface finish, integrated into the basic machine. Two special brush rollers 150 mm Æ arranged one above the other in synchronous function for advance thrust. Separate height adjustment of the brush rollers on precise Carriage guides for post-correction of wear. Additional transport roller for Removal or further transport of the workpiece from the automatic grinding machine with the conveyor belt. Wooden guide in the inlet area for hard guide and bearings mounted on both sides pressure rollers. Safe transport of profiled workpieces on ca...

Condition: ready for operation (used), Year of construction: 1998, controller manufacturer: SIEMENS, overall weight: 16,500 kg, This BURKLE BTF 1628 laminating press was manufactured in 1998. It features a max panel size of 1250x2550 mm, panel thickness range of 6-35 mm, and a heating plate dimension of 1600x2800 mm. Equipped with a Siemens control system and a total power requirement of 38 kW. Consider the opportunity to buy this BURKLE BTF 1628 laminating press. Contact us for more information. • Max Panel Size: 1250 x 2550 mm • Panel Thickness: 6 - 35 mm • Heating Plate Dimensions: 1600 x 2800 mm • Max Heating Temperature: 140° Ihsdpfox D Ifmjx Abcew • Max Stroke: 230 mm • Total Power Requirement: 38 kW

Condition: ready for operation (used), Year of construction: 1998, This WILD door leaf press line was manufactured in 1998. It is designed for door production, handling dimensions from 1,800 to 2,300 mm in length, 500 to 1,300 mm in width, and thicknesses of 35, 40, and 44 mm. The line includes areas for gluing, pressing, and handling door panels with advanced feeding and transfer systems. If you are looking to get high-quality door production capabilities consider the WILD door leaf press line we have for sale. Contact us for more information. Machine Benefits Technical Machine Benefits • Dimensions for door production: lengths: 1800 - 2300 mm • Dimensions for door production: widths: 500 - 1300 mm • Dimensions for door production: thicknesses: 35 / 40 / 44 mm Ihjdpfxeyaqmgs Abcjw Extra Information Consisting of the following areas: Endless door panel gluing with frame laying station Press line with hard fiberboard loading station First area consists of: Portal feeding Angle transfer with rip and cross cut saw Feeding and supply of longitudinal and cross frame parts from magazines Longitudinal cross-cut station for the longitudinal frame parts Connecting station for the frame parts with the door leaf core, equipped with clamping devices Conveyor belt angle transfer with shuttle transfer of the door leaf cores to the glued hardboard panels Second area consists of: Feeding of the hardboard panels Brush cleaning machine Hardener application machine from below Glue application machine from below Disk roller conveyor Angle transfer for the lower hard fiber board Vacuum turning device for the upper hard fiberboard Automatic loading station for hardboard panels and door leaf cores Two door presses with two x four pressing stations each, set up parallel to each other Both presses are loaded at the infeed with one shuttle loading basket Both presses are unloaded at the outfeed with one shuttle unloading basket Angular transfer to the infeed into a hedgehog buffer Angular transfer at the outlet of the hedgehog buffer and feeding for stacking One-sided vacuum destacking with protective plate placement Note: The technical data and descriptions are transcribed from the original order confirmation. The information is for reference only and is not legally binding.

Condition: ready for operation (used), Year of construction: 2018, controller manufacturer: SIEMENS, controller model: SIVATIC HMI, This WEMHÖNER Variopress Basic 1000S was manufactured in 2018. Ideal for efficient laminating processes, this machine ensures consistent performance. Consider the opportunity to buy this WEMHÖNER Variopress Basic 1000S laminating press. Contact us for more information. Additional equipment • Including: 2 x paternoster magazines for film rolls Machine Benefits Technical Machine Benefits • Heating plate format (mm): 2850 x 1550 • Electric heating plate design: aluminum heating plate top • Total pressing force (kn): 2400 / chamber pressure max (bar): 6 / operating temperature max: 180 degrees celsius / batch or workpiece size max (mm): approx. 2460 x 1180 • Thermoplastic film in rolls, width of the film: approx. 1430 mm / thickness of the film (mm): approx. pressure chamber height (mm): max. Up to 180 Ihedjx D Hy Aspfx Abcsw • Connection values: installed power (kw): approx. 46 / required air pressure (bar): approx. 8

Condition: ready for operation (used), Year of construction: 2024, total height: 2,500 mm, overall weight: 3,700 kg, This laminating press was manufactured in 2024. It features a robust servo-hydraulic drive system and operates at pressures between 6-8 bar. With a substantial footprint of 1000 × 2500 mm and a working table size of 1500 × 1000 mm, it is ideal for panel processing and interior components. Consider the opportunity to buy this Other COMAG MPM 1500-1000 T6-E laminating press. Contact us for more information. • Pneumatics and hydraulics: • Operating pressure: 6–8 bar • Drive system: Servo-hydraulic drive • Electrical data: Iedpfx Aoyglkmobcshw • Electrical connection: 3 × 400 V / 50 Hz • Number of phases: 3L • Maximum power: 30 kW • Maximum current: 100 A • Applications: • Laminating, punching, and edge folding of panels • Trimming and edge foiling of panels • Processing of armrests and central armrests • Production of railings, handles, back covers, and door handles • Typical use: Ideal for panel processing interior components; also suitable for the furniture industry Dimensions Machine Depth 2500 mm

Condition: ready for operation (used), Year of construction: 2007, This DIMTER PROFIPRESS L2500 was manufactured in 2007. A robust used gluing press, it features a press bed of approximately 2500 x 1300 mm and a stable base frame. It includes a motor-driven multifunctional pusher and an automatic gluing station with a precision glue head. Ideal for both softwood and hardwood, it ensures even pressure distribution and high vertical pressure for low offset. Contact us for more information about this machine. • Workpiece capacity: • Lamella widths (for panels): 30–150 mm • Thicknesses: 11–60 mm • Input length: 800–2500 mm • Panel width: variable, up to max. 1300 mm • Filling width per cycle: min. 650 mm / max. 1300 mm • Max. filling area per cycle: 3.25 m² • Note: Max. usable press width depends on individual lamella widths • In multi-lane operation, filling widths may vary by max. 15 mm • Minimum contact surface per press filling: ≥ 100 cm² • Press performance: • Specific pressing pressure (at 2500 x 60 mm): up to 1.6 N/mm² • Press bed and construction: • Press bed area: approx. 2500 x 1300 mm Isdpfxex D I Nro Abcjhw • Stable base frame with lower press table in stainless steel (ground electrode) • Upper pressure plate with hydraulic motor “anti-reb” feature for high vertical pressure and low offset • Special hydraulic pressure elements ensure even pressure over the joint and compensate tolerances • Quick-change stop ruler sets for panel thicknesses 19–40 mm; hydraulically movable to the current filling width • Integrated hydraulic unit for press force and hydraulic motors • Electrical: • Operating voltage: approx. 400 V / 50 Hz • Electrical connection value of press (without options): 7 kW • Electrical connection value for 40 kW HF generator: 56 kW • Controls and safety: • Control cabinet and control panel • Protective cover Additional equipment • Collection table extended to 3700 x 1300 mm (with stainless steel wood support) • Motor-driven multifunctional pusher • Additional individual pressure elements from above • Automatic gluing station with precision glue head • Feed system for different widths • Camera • Washing and rinsing device for glue head • Modem with software for online connection

Condition: used, 0 ja_yes Striffler sash Fitting Table ----- - with automatic screwdriver and screw feeder - Fitting rack - Punch for Roto fittings (Technical specifications according to the manufacturer, without guarantee!) Ihjdpfjyn R Iyjx Abcow

Year of construction: 1997, condition: used, Number of sanding units 1 st. sanding width 140 mm Sanding height max. 120 mm LÖWER Molding Intermediate Sanding Machine Model LZ 2 For finishing and intermediate sanding of all types of moldings. Particularly fast processing thanks to simultaneous sanding of Iodpjyn R Itjfx Abcjhw several moldings side by side. Conveyor belt feed with table extension under the sanding roller. 1 roller unit from above, working width 140 mm, table length 1100 mm, Workpiece thickness adjustment 2 - 120 mm with numerical display, Drive motor 2.2 kW at 1,430 rpm, mandrel 32 mm, Three feed speeds: 6, 12, and 16 m/min, Infeed contact, extraction ports 2 x 100 mm, Operating voltage 400 V, 50 Hz, 3 Ph, air connection 6 bar. NOTE VIDEO: Video NOT original. Shows machine type of the same model from our archive. (Technical data according to the manufacturer - without guarantee!)

Condition: used, Year of construction: 2006, Tenoning spindle 2 St. Number of milling agregates 5 St. Spindle diameter 50 mm SCM Windor 40 R window production centre, manufactured in 2006 ----- This machine is part of the sale of a complete window manufacturing operation, see stock number 1305-6979. Machines still connected and ready for demonstration Technical Summary: ----- - 2 long CNC-controlled slotting spindles - Optima 16: Drilling units for face and longitudinal drilling - ROTATEN: Angled window attachment - 3 long CNC-controlled profile spindles + top and bottom unit - Rebating carriage for small sashes - Workpiece return Options with additional costs: ----- - Used Leitz window and door tools for SCM Windor 40 R. Price: €10,000 - Separate OKOMA UF 3 rebating machine with compatible tools for SCM Windor 40 R systems. Price: €2,000 - Used chip extraction and filtration system for SCM Windor 40 R Iodpfx Aeyn R Imebcehw (See attached PDF for more information). Price 5.500 Euro (Technical specifications according to the manufacturer, without guarantee!)

Year of construction: 2022, condition: used, Number of sanding units 6 st. sanding width 45-165 mm Sanding height max. 45-92 mm weight 2200 kg Ecoline Q-SAND 6 For sale on behalf of a customer ----- Full text as PDF attachment! Short description: Machine with infeed conveyor and automatic height detection. It has two grinding discs on top and two grinding discs on the bottom, each connected to a brush unit. Technical manufacturer's description: Iedpfoxyafkox Abcehw Ecoline Q-Sand: the ideal grinder for squared timber and more. Designed to work on both sides of the workpiece with three-dimensional adjustment, the Q-Sand guarantees maximum precision and uniformity. It is equipped with grinding discs, flap brushes, and a double disc for more effective material removal, thus improving adhesion for subsequent treatments. The Q-Sand can be installed in a production line or, due to its complete operational autonomy, can also be used independently. It is also ideal for window frames, beams, and custom-made products, and optimizes processing times with automated systems and advanced production control. ----- Price of the above-mentioned machine available upon request! ----- (Technical specifications according to the manufacturer - without guarantee!) All prices quoted are net prices, excluding VAT. The video is from the manufacturer Ecoline and shows a new machine.

Condition: excellent (used), Year of construction: 2002, machine/vehicle number: 10229, functionality: fully functional, operating hours: 25,000 h, power: 13 kW (17.68 HP), input voltage: 400 V, input current: 32 A, input frequency: 50 Hz, type of input current: three-phase, grinding belt width: 200 mm, grinding belt length: 1,800 mm, grinding height: 190 mm, height adjustment type: electric, actuation type: electric, total height: 1,890 mm, total length: 2,070 mm, total width: 1,020 mm, overall weight: 1,500 kg, Equipment: CE marking, documentation/manual, The machine is in very good condition, has been used only a little, with the option of refurbishment upon agreement. Ihjdpoyt Hkusfx Abcjw

Year of construction: 2022, condition: used, Number of sanding units 6 st. Sanding height max. 120 mm output 12 kw Ijdpfx Aboynnttecjhw

Condition: good (used), Slotted disks, window milling tools, indexable inserts, window construction tools -Slit discs, milling tool for: wooden windows -EXACTLY -Take: Ø 50 mm -1x pallet tool Iodpfx Aob A Rg Ssbcjhw -different sizes -Weight including pallet: 346 kg

Condition: used, Year of construction: 1993, incl. suction bellwith controlled infeed rollerusedmake Guilliettype KXYyear of construction 1993machine no. 2841GS-wood dust testednumber of spindles 4spindle arrangement u-re-li-omotors 3,7 kWplaning width approx.30-180 mmplaning height approx. 6-120 mmmotor brakestable length approx. 2000 mmknife system strip planing knifepre-feeding cuttercardan feedpneumatic pressure of the infeed roller - infeed cycle controlledprotective hoodinfeed before planingfeed speed 12 m/ctrical adjustment thickness shaftdigital displays height - widthsuction connection 250 mm / 3 x 120 mm / 1 x 140 mmspace requirement approx. 3200 mm x 1200 mm x 1500 mmweight approx. 1200 kgstorage location 97447 Gerolzhofen, free loaded, unpackeddelivery in as-is condition, as viewed,without warranty and guarantee Ihodpfxjvwfuie Abcow

Condition: excellent (used), functionality: fully functional, Götzinger OBM Plus fitting drilling machine for corner and stay bearings, handle olives as well as handle/PZ drilling. - Base machine with interchangeable adapter for various drill heads - Workpiece roller conveyor left and right, 150 mm - Fold-down and lockable (can be secured) workpiece supports - Pneumatic drilling feed operated by foot pedal - Stop for fixed handle positions for olive drilling - Measuring scale SPECIAL EQUIPMENT: Isdpsyunqljfx Abcshw - Drill head adapter adjustable via handwheel and SIKO display (resettable) Continuously adjustable for spindle dimension - Depth stop with 4-way turret Well-maintained and very well-equipped machine Year of manufacture: 1999 Matching drill heads and rulers available as desired, see pictures Base machine 1,600 Euro Olive drill head 300 Euro Corner and stay bearing drill head + ruler (SIEGENIA or MACO system) 400 Euro If you have any questions, please feel free to contact us. The machine can be tested on site.

Condition: used, Year of construction: 1989, Four-sided planer FUTURA ROTOMAT 220/5 with fifth milling spindle Ihsdpoxx Tb Nefx Abcsw