Used Lowboy semi-trailers / low loaders for sale (218)

Condition: used, overall weight: 65,000 kg, maximum load weight: 51,600 kg, axle configuration: > 3 axles, first registration: 07/2023, next inspection (TÜV): 07/2024, total width: 2,540 mm, Equipment: ABS, Excerpt from the furnishings. Full furnishings available upon request. * Telescopic loading bed, length approx. 8,800 mm, with a rear slope of approx. 500 mm x 10° * Recess in the slope and extending into the loading bed to accommodate the excavator dipper * One pair of two-part steel ramps * BPW axles and suspension, 1st and 2nd axles rigid, 3rd and 4th axles self-steering * Air suspension with lift and lower valve * 235/75 R 17.5 3PMSF tires with twin tires * WABCO EBS-E braking system * Steel bulkhead, pluggable, approx. 400 mm high * One pair of pluggable aluminum side walls on the gooseneck, approx. 400 mm high, anodized * One pluggable aluminum rear wall on the gooseneck, approx. 400 mm high High, anodized finish * 2 kingpins * Extensions (galvanized), extendable by approx. 230 mm per side (without wooden planks) * 1 pair of permanently installed wheel recesses, open to the extension, approx. 700 x 410 mm (W x D), in the loading area in front of the 1st axle * Wheel recesses with sheet metal covering and square climbing rails, approx. 15 x 15 mm, approximately every 200 mm * Between the 2nd and 3rd axles in the loading area, 1 pair of permanently installed wheel recesses, approx. 1,695 x 700 x 410 mm (L x W x D) * Covers for wheel recesses, divided lengthwise, with wooden support, with external plug-in safety devices * WABCO Smart Board System * 1 single-piece stainless steel toolbox, approx. 2,480 x 340 x 390 mm * Galvanized stands for the Extendable wheel well extensions for widening the wheel well covers Cgjb Hljwbb Uljfrket * Central lubrication system with 1 pump, brand BEKAMAX * 1st axle with automatic lifting axle function and traction aid * 1 LED reversing light on the left and right rear of the vehicle * Complete HRM (High Resistance Metallization) metallization

Condition: used, overall weight: 35,000 kg, axle configuration: 3 axles, loading space length: 12,600 mm, loading space width: 2,480 mm, loading space height: 2,860 mm, first registration: 05/2020, next inspection (TÜV): 08/2025, total width: 2,550 mm, total height: 3,820 mm, Equipment: ABS, For vehicle inquiries, please contact Mr. Seidel (tel. ). ----Fliegl SDS 350 Curtainsider Trailer ---- * !!! Only 20,865 km - TÜV 08/2025 !!! * Air suspension * SAF axles * Haldex ABS Cgjb Hlfjwaurherket * Drum brakes * Spring brakes * Haldex Info Centre 2 * Sliding roof * 2x sliding tarpaulins on the sides * Additional headlights: Rear of vehicle * Gross vehicle weight: 35,000 kg * Unladen weight: 7,900 kg * Payload: 27,100 kg * Loading space dimensions: Length to offset: 9,610 mm, Width: 2,480 mm, Height: 2,860 mm * At offset: L 2,990 mm, Width: 2,480 mm, Height: 2,290 mm * Tire profile: 1st axle 9-10mm 2nd axle 11-12mm 3rd axle 9-10mm We can provide you with a leasing or financing offer upon request. Mr. Seidel (Tel. ) will be happy to assist you. Further information can be found on our website. !!! Errors, changes, and prior sale excepted!!!

Condition: used, overall weight: 48,000 kg, empty load weight: 7,140 kg, maximum load weight: 40,860 kg, axle configuration: > 3 axles, loading space length: 13,420 mm, loading space width: 2,460 mm, loading space height: 3,020 mm, loading space volume: 99 m³, first registration: 01/2019, next inspection (TÜV): 08/2025, suspension: air, color: black, tire size: 245/70 17,5, Year of construction: 2019, total length: 13,420 mm, tire condition: 30 %, front tire size: 245/70 17,5, rear tire size: 245/70 17,5, driver cabin: day cab, emission class: none, Equipment: ABS, truck registration, Vehicle number for inquiries: 694391 Dinkel, DAPP * Year of manufacture: 2019 * ABS, anti-lock braking system * Edscha / sliding roof * Landing safety certificate DIN EN 12642 Code XL * Lashing holes in the outer frame (Multilock outer frame) * Mechanical lifting roof * Aluminum planks * Trailing steering axle * 2x7-pin connector * 15-pin connector * Lifting and lowering device * Storage box / toolbox * Galvanized * Widenable * Ice Protect for ice-free roofs * Rear support * Inspections: HU / AU 08.2025 * Gross vehicle weight: 48,000 kg * Unladen weight: 7,140 kg * Payload: 40,860 kg * Axle manufacturer: BPW% * Tire condition 1st axle: 30% -- 30% - Tire size: 245/70 R17.5 * Tire condition 2nd axle: 30% -- 30% - Tire size: 245/70 R17.5 * Tire condition 3rd axle: 30% -- 30% - Tire size: 245/70 R17.5 * Internal dimensions: L=13420 mm, W=2460 mm, H=3020 mm * Hydraulically extendable 800 mm on each side * Fifth wheel height 980 mm * Aluminum dock ramps 18960 kg * Ramp extension wedges * Floor rail including wedges * RSAB Roof Safety Bag * Height-adjustable rear support legs * Wabco SmartBoard * 14 heavy-duty trailers Lashing eyes 8000 kg, trailing axle with electrical and mechanical locking. * LED lighting. * We will be happy to send you a construction description upon request. Subject to errors and prior sale. Additional images and 360-degree images can be found on our website. Our comprehensive service includes, for example: * Purchase/sale/rental of commercial vehicles * Fast, uncomplicated financing * Application for all (export) documents * Ordering export license plates/customs license plates * Vehicle preparation: new tarpaulins, lettering, paint jobs, etc. * Professional loading/load securing * TÜV inspections, registration service * Transfer of commercial vehicles Ask our trained specialists; we will be happy to advise you. Reference no. for inquiries: 694391 Spelled, DAPP * Year of manufacture: 2019 * ABS, anti-lock braking system * Edscha / sliding roof cover * Load securing certificate DIN EN 12642 Code XL Cgjb Howaq A Aolfrkot * Decorative perforation in the frame (Multilock outer frame) * Roof panel mechanical * Aluminum boards * rear steering axle * Connecting plug 2x7-pin * Connecting plug 15-pin * Lifting & lowering device * Storage box/toolbox * galvanized * expandable * Ice Protect for ice-free roofs * Rear support * Inspection: HU / AU 08.2025 * Total weight: 48,000 kg * Empty weight: 7,140 kg * Payload: 40,860 kg * Axle manufacturer: BPW% * Tire condition 1st axle: 30% -- 30% - Tire size: 245/70 R17.5 * Tire condition 2nd axle: 30% -- 30% - Tire size: 245/70 R17.5 * Tire condition 3rd axle: 30% -- 30% - Tire size: 245/70 R17.5 * Dimensions of vehicle interior: L=13420 mm, W=2460 mm, H=3020 mm * Hydraulically widenable 800 mm on each side * Fifth wheel height 980 mm * Aluminum ramps 18960 kg * Ramp height

Condition: new, axle configuration: 3 axles, loading space length: 9,250 mm, loading space width: 2,520 mm, Year of construction: 2022, Equipment: ABS, Fifth wheel height: 1200-1250 mm Gooseneck cross-section: 185 mm Gooseneck length: 3800 mm Front overhang: 1200 mm Front radius: 1560 mm Free turning radius under gooseneck: 2350 mm Gooseneck slope: 750 mm x 14° Gooseneck width: 2520 mm Loading area Ride height when loaded (-/+ lift): 860 mm -70/+130 mm Step to gooseneck: 550 mm Loading area length: 9250 mm Loading area slope: 1150 mm x 5° Loading area width: 2520 mm Loading area widening up to max: 3020 mm Axle spacing Kingpin first axle: 7190 mm Rear wheelbase: 1360 mm Rear overhang: 2340 mm Rear kingpin: 12250 mm Load-up ramps Ramp angle: 4000 mm x 11° Height in driving position: 3265 mm Width when folded over ramps: 1770 mm Width when extended over ramps: 2990 mm Ramp width: 880 mm Power supply - Connections for brakes, lighting, and EBS centrally located on the front console. - NATO connection cable in spiral flex design (coil cable). Csb Hjicfarelfrkogt - NATO socket. Mounting kit for tractor unit is not included. Front bulkhead / box - Lockable steel toolbox mounted on the front gooseneck, divided into three compartments, with side doors and a stainless steel lid on top. Color: silver gray RAL 9006. SUITABLE FOR INSTALLATION OF A WINCH. Gooseneck Options - Spare wheel carrier mounted on the front. - A lashing eye on the back of the gooseneck for attaching the steel cable. - 3 aluminum side walls on the gooseneck, 400mm high, all three approximately 2.3m long. Loading Area - The loading area is sloped at 1150x100mm (5°). - Tubular central frame with practical cross members. This makes the semi-trailer very torsion-resistant and therefore very stable when loaded. - The cross members are reinforced where necessary to ensure safe passage of machinery. - 6/8mm teardrop plate above the axles. - Cross members recessed by 4cm. - Cross members recessed by 4cm in the slope. - Loading area above the tires reinforced for road milling machines up to Wirtgen 1000DC. - Extendable extension brackets every approximately 1.40 m to widen the loading area by 250 mm per side. Brakes - 2-line Wabco EBS braking system, with automatic load-sensing brake force control (ALB), anti-lock braking system (ABS), and roll-over stability support (RSS). - Parking brake via spring cylinders on multiple axles. - ISO couplings for connecting the brakes. - A Duomatic connection is mounted parallel to the ISO air connections. Lighting - Wiring is based on Hella EasyCon and complies with the IP69 insulation standard, suitable for ADR. - 2 7-pin sockets (ISO-N and ISO-S) on the front bracket. - White/red clearance lights, orange side lamps, and license plate lighting in LED design. - Rectangular LED taillights. (According to EU directives, the truck must be capable of monitoring the trailer's (LED) direction indicators.) - 1 complete rear rotating light connection. - Preparation for warning signs on the gooseneck and axle frame, consisting of holders and sockets. - 4 adjustable red/white warning signs with protected LED position lights. - Rotating light connections on the warning signs. - Pair of additional holders for mounting warning signs in the existing stake pockets on top of the loading area. - LED rotating light (10W - 24V/0.4A - 12V/0.8A) - Additional 2-pin socket mounted on the left ramp. - Additional 2-pin socket mounted on the right ramp. - 2 LED work lights on the

Condition: used, overall weight: 83,000 kg, maximum load weight: 44,750 kg, axle configuration: > 3 axles, first registration: 07/2013, next inspection (TÜV): 05/2027, Year of construction: 2013, Internal vehicle number: G300087 German vehicle Available immediately at our yard in Kaufungen - Kassel, Germany More information at: * Luis Lucena (German, English, Spanish, French) *Viktoria Sologubova (Polish, Russian, Ukrainian, English) Heavy-duty tractor unit Empty weight 13,050 kg Max. Total weight 41,000 kg Semi-trailer load 37,500 kg 630 HP Euro 6 Leaf / air Retarder Auxiliary heating Low loader Faymonville STBZ-6VA Year of manufacture 2013 4 axles + 2 additional axles Extendable 3.2 m Length: 16.43 - 19.63 m Width: 2,750 mm to 3,250 mm Max. permissible total weight 85,500 kg Empty weight 25,200 kg Vehicle combination Payload: 44,750 kg Empty weight 38,250 kg Total weight 83,000 kg Length: 20,400 - 23,600 mm   Cjb Hlfsvzdzisrkjgt Financing example: * Internal number: G300087 * Purchase price: ¤199,900.00 * Down payment: 10% * Term: 60 * Monthly rate: ¤3,130.91 Residual value: ¤39,980.00 If you like the offer or want to adapt it to your needs, please contact us at Mr. Enchev. We look forward to your call     Errors excepted   We are happy to accept your used vehicle as a trade-in. Financing is possible directly from us. GOLEC NUTZFAHRZEUGE GMBH We speak: German, English, Spanish, Polish, Ukrainian, Russian, Bulgarian.   ----.

Condition: used, overall weight: 36,000 kg, maximum load weight: 26,100 kg, axle configuration: 3 axles, loading space length: 13,650 mm, loading space width: 2,480 mm, loading space height: 3,000 mm, first registration: 03/2013, next inspection (TÜV): 02/2025, total width: 2,550 mm, total height: 4,000 mm, Equipment: ABS, Krebs Mega sliding tarpaulin trailer with Dhollandia LBW 9 tons with ramp function Cgjb Hlsu Em Nnjfrket * Recently painted new tarpaulins, rear and front portal * SAF axles * 1st axle can be lifted * 3rd axle as self-steering axle * Dhollandia tail lift type DHLSU.90, lifting capacity 9,000 kg, ramp function * Radio remote control * 3 large storage boxes * Work lights * Ice-Protect We are happy to provide you with further information

Condition: used, overall weight: 49,000 kg, maximum load weight: 36,100 kg, axle configuration: 2 axles, first registration: 10/2024, next inspection (TÜV): 10/2025, total width: 2,550 mm, Equipment: ABS, Excerpt from the furnishings. Full furnishings available upon request. Gooseneck * Gooseneck in SNT design to optimize the loading area length * Length approx. 3,750 mm, hydraulically raised/lowered and removable * Technical fifth wheel load: 25,000 kg * For tractors: 4 x 2, 6 x 2, and 6 x 4 Lowbed * Lowbed designed as a telescopic tank bridge in a low construction with front extension and mechanical locking * Length x width approx. 6,850 mm x 2,540 mm * The supply lines are protected in the extendable supports and automatically adjust to the respective lowbed length Axles and Suspension * PENDULUM AXLE, all axles hydro-mechanically forced steered, hose rupture valve on the axle compensation, cylinder with automatic RESET function * Hydraulic cylinder with shut-off valves and cotter pins for securing in the raised position * Technical axle load: each 12,000 kg * Hydraulic axle compensation Tires * 245/70 R 17.5 Rear chassis Cgjb Hlfev U H Rmerkjt * Rear chassis with closed outer frame with checker plate cover and continuous prismatic excavator trough approx. 1,250/700 x 505 mm, open at the rear Braking system * WABCO EBS-E braking system in accordance with EU regulations, without connection cable to the tractor unit Paintwork * Trailer color: RAL 3002 Carmine Red Accessories included * Plug-in steel bulkhead, approx. 400 mm high * 3 kW electro-hydraulic power unit for controlling hydraulic processes, with the exception of hydraulic cable winches, without installation of supply connections on the tractor unit * Gooseneck outer support with mounting holes for screw-on lashing rings. The first hole is about 200 mm from the front, then every 400 mm. 2 pairs of screw-in lashing rings included (LC 5,000 daN) * 1 lashing ring each on the left and right on the rear bevel of the gooseneck (LC 6,000 daN) * 2-inch kingpins * One locking point every approximately 500 mm on the extension * 1 pair of steel ramps with climbing rails and fastening bolts for bridging the low bed's hooks * 1 lashing ring each on the left and right on the front cross member (LC 10,000 daN) * Lashing rings with retaining springs every approximately 1,200 - 1,300 mm on the outside of the inner beams of the loading area * Lashing rings with retaining springs every approximately 1,200 - 1,300 mm on the outside of the outer beams of the loading area (LC 10,000 daN) * Recesses above the lashing rings on the top chord of the outer beams * 1 Lashing ring hanging outside on the left and right of the rear cross member (LC 10,000 daN) * On the outer beams of the loading area, prepared for the removable loading floor * Hook-on rail at the front of the rear chassis to the low bed for loose loading ramps * Chassis with beveled corners at the rear * Hook-on rail for loose aluminum loading ramps on the vehicle's end cross member * Steering can be operated from the front and rear via cable remote control using push buttons, with axle alignment control, without installation in the tractor unit * Mechanical bolt-and-lug coupling from the low bed to the chassis, for replacing the loading area or installing extension beams, with electro-pneumatic-hydraulic couplings * Round NATO socket on the front connection panel (Maeler & Kaege VG 96 917) * 2 axle load gauges mounted on the left side Including special accessories * 1 pair of plug-in gauges on the gooseneck Aluminum side walls, approx. 400 mm high, anodized finish * A plug-in aluminum rear wall on the gooseneck, approx. 400 mm high, anodized finish * Cen

Condition: used, overall weight: 50,000 kg, maximum load weight: 41,620 kg, axle configuration: 3 axles, loading space length: 12,150 mm, loading space width: 2,550 mm, loading space height: 1,200 mm, first registration: 03/2006, total width: 2,550 mm, total height: 4,000 mm, Equipment: ABS, 3-axle low-loader semi-trailer with container locks for 20-foot containers, raised front wall approx. 1200 mm, loading bed: 7220 mm, loading height: approx. 920 mm / unloaded, rear slope: 980 mm, gooseneck: 3950 mm, 11 heavy-duty lashing rings per side, hydraulic loading ramps that can be moved sideways (LxW) 3800 x 780 mm, support winch(s), mount for rotating beacon at the rear, 2x storage box, ABS, EBS, ROR axle(s), drum brake system, air suspension with lifting and lowering device, vehicle can be covered with advertising and/or labeled Our offer is generally without a new TÜV approval. If a new TÜV approval is required, we would be happy to make you an offer from our partner workshops! Vehicle can be covered with advertising and/or labeled. Our general delivery and payment terms apply. We would be happy to provide you with a financing or leasing offer for this property. Csb Hlfev Dp Hcjrkjgt Please contact us!

Condition: used, overall weight: 9,900 kg, maximum load weight: 7,040 kg, axle configuration: 2 axles, loading space length: 9,600 mm, loading space width: 2,000 mm, first registration: 02/2016, total width: 2,070 mm, total height: 1,800 mm, * 2nd owner from municipal ownership Cgsbev T E Syo Hlfrkot * Rear loading platform height 90cm, front loading platform 140cm * Total loading length 9600cm * Fifth wheel dimensions approx. 1.20m * Tool boxes * Matching fifth wheel coupling included Subject to errors, typos, and prior sale. Viewing by appointment

Condition: new, overall weight: 48,000 kg, maximum load weight: 39,500 kg, axle configuration: 3 axles, Year of construction: 2023, Equipment: ABS, Gooseneck Fifth wheel height: 950 mm (1200 mm) Gooseneck cross-section: 115 mm Gooseneck length: 4800 mm Front overhang: 1500 mm Front radius: 1960 mm Free turning radius under gooseneck: 2350 mm Loading area Ride height when loaded (-/lift): 985 mm -80/ 160 mm (1020 mm 115/ 125 mm) Loading area length (retracted / extended): 13160 mm / 19960 mm Rear loading area length: 8300 mm Extendability: 6800 mm Loading area slope: 330 mm x 10.5° Loading area width: 2520 mm Axle spacing King pin 1st axle (retracted / extended): 6440mm/13240mm Rear wheelbase: 1360mm Rear overhang: 2500mm Rear kingpin (retracted/extended): 11660mm/18460mm Country-specific adaptations - TÜV towing certificate for application for §70 approval - 4 wheel chocks with brackets - 3 stickers 80 affixed - A CAUTION EXCESSIVE LENGTH sign at the rear Power supply - Separate connection panel for air lines, electrical cables, and EBS connection - 2x 7-pin sockets (ISO-N and ISO-S) on the connection panel for the 24V lighting - ISO couplings on the connection panel for connecting the brakes - 1 additional Duomatic connection with standard air connections - Actros 15-pin socket (ISO 12098) at the front, in addition to ISO-N S. Gooseneck design - Jost-branded landing gear with T-shaped base plate and single crank on the left - Gooseneck with an overall height of only 115 mm, ensuring the loading height remains extremely low - 28 mm hardwood floor, laid lengthwise - 2-point kingpin, replaceable - Loaded fifth wheel height of approximately 950 mm Front bulkhead / body - 1,500 mm high, removable bulkhead. Closed up to 1,000 mm high, 500 mm open steel frame construction with cross braces - Stanchion holder on the inside of the bulkhead for a maximum of 26 stanchions measuring 81 x 51 mm Gooseneck and other options - 1 spare wheel clamp for a horizontal spare wheel on the top right of the gooseneck - Spare wheel holder on the front Gooseneck cargo securing system - 3 stake pockets (96 x 66 x 6 mm) in the side profile - 2 VRL-4 TÜV-certified tie-down points in the side profile - 1 TÜV-certified tie-down point in the rear side profile Loading area - Tubular central frame with practical cross braces - Pull-out steps every approximately 0.5 m with pneumatic locking - 40 mm hardwood flooring laid lengthwise. 6/8 mm teardrop sheeting above the rear slope - Loading area with pull-out rails Widening brackets spaced approximately 1.4 m apart, widening by 2x approx. 250 mm - Loose wooden planks (approx. 9,000 - 9,500 mm total) for the loading area widening brackets Load securing for the loading bed - 7 poles of 96 x 66 x 6 mm stake pockets - 7 poles of TÜV-certified lashing eyes (LC 8,000 daN) in the side profile - 4 transverse rows of stake pockets in the loading area. Suitable for stake dimensions of 81 x 51 mm - 10 mm round steel lashing hooks welded to the bottom of the outer frame, every approximately 0.5 m - 4 poles of recessed container locking devices (twistlocks) for 1x40 or 2x20 Axle frame - 3 axles. 3rd axle: self-steering, automatically locking when reversing, manually lockable - Brake drums (300x200mm) with automatic slack adjusters (AGS). - SAF axles - Air suspension raise/lower operated via 5-position rotary lever. 1 pressure gauge - 2nd driving position of the air suspension - Splash guard with side plates, 2 mud flaps behind each axle - Lift axle including overload protection, on the front rear axle - Goodyear 245/70R17.5 on steel wheels Cgebslt S Uuo Hlfrkjt Load-up ramps - Integrated tow

Condition: used, overall weight: 34,000 kg, axle configuration: 2 axles, loading space length: 11,900 mm, loading space width: 2,450 mm, loading space height: 3,150 mm, first registration: 07/2002, Equipment: ABS, * Vehicle has French papers * Floor adjustable with radio/remote control * Folding ramps with radio/remote control * Edscha soft top currently removed As viewed or offered, without further services / accessories. Our offer is generally without new TÜV approval. If a new TÜV inspection is required, we will be happy to make you an offer from our partner workshops! The vehicle may have advertising stickers and/or lettering. Our general terms of delivery and payment apply. We support you with export, preparation of export documents, procurement of license plates, supplier's declaration, etc.! The information provided in advertisements, the Internet, price tags and pictures are non-binding descriptions and do not serve as guaranteed characteristics. The seller accepts no liability/warranty for typing and data transmission errors. Listed equipment must be checked separately if necessary. Subject to errors and prior sale. Csb Hsv Tgv Telfrkjgt

Condition: new, overall weight: 36,000 kg, axle configuration: 3 axles, loading space length: 13,620 mm, loading space width: 2,480 mm, Year of construction: 2025, total width: 2,550 mm, total height: 4,000 mm, Equipment: ABS, Krone SDP 27 step semi-trailer with spreader tail immediately available Photos of the spreader tail to follow shortly Cgebetrib Ne Hlfrkot * Fifth wheel height unloaded: 1,180 mm * Multilock external frame, universal load securing option every 100 mm * for loading space length: 13,620 mm i. L. Low bed 9,610 mm / platform 4,010 mm, loading space width 2,480 mm i. L. * 3 axles each with a load capacity of 9,000 kg * Wheelbase: 1,310 / 1,310 mm * BPW unit with air suspension * Brake drums, 300 x 200 mm (for 17.5" rim) * Fully automatic electronic lifting axle control for 1st axle, depending on load * Air suspension with lifting and lowering device, including automatic ride height reset * 12-fold tires, 235/75 R 17.5 * Multifunctional rear lights (full LED) * Incl. 1 reversing light * 2 additional LED reversing lights * 1 toolbox, plastic 650x490x450 mm * 1 additional toolbox, plastic * Combination: truck-mounted forklift / hydraulic rear extension * 30 mm thick, waterproof plate floor, for floor loads up to max. 7,000 kg forklift axle load * hydraulic lifting roof with 500 mm total lift * Certificate for load securing in accordance with EN 12642 Code XL * Certificate for load securing for beverage transport (VDI 2700 Sheet 12) * Steel parts blasted, KTL primed with zinc phosphate coating and powder coated * Chassis including outer frame RAL 9005 DEEP BLACK * Tarpaulin color RAL 9006 WHITE ALUMINUM * Structure (front wall, rear portal, rear wall) RAL 7035 LIGHT GRAY We are happy to provide you with further information

Condition: used, overall weight: 30,000 kg, empty load weight: 6,600 kg, maximum load weight: 23,400 kg, axle configuration: 2 axles, loading space length: 10,200 mm, loading space width: 2,430 mm, loading space height: 2,900 mm, first registration: 09/1991, next inspection (TÜV): 09/2021, suspension: steel, color: red, tire size: 9.5R17.5, mileage: 1,001 km, gearing type: other, driver cabin: other, Vehicle location: Bovenden, 2-axles, BPW axles, leaf springs, lashing eyes, hydraulic ramps, rear support, supports, twin tires Construction: 2-axle low-loader trailer with solid walls, tarpaulin and continuous hydraulic ramp, loading height approx. 950mm! Tires approx. 40-70%! ACCESSORIES INFORMATION WITHOUT GUARANTEE, subject to changes, prior sale and errors! Csb Hlfsi Rk U Hjrkegt - .

Condition: used, Year of construction: 2024, GVN Trailer 3 Axle Standart Lowbed      Please get contact with us for more informaiton;      Cgobsqxa Szo Hlfrkot

Condition: new, overall weight: 38,000 kg, maximum load weight: 25,300 kg, axle configuration: 2 axles, total width: 2,540 mm, Equipment: ABS, Extract from the equipment. Complete equipment on request. Cgob Hlfrev Sw E Aokst Gooseneck * Gooseneck in SNT design to optimize the loading area length * Length approx. 3,750 mm Gooseneck can be raised/lowered hydraulically and can be driven off * Technical fifth wheel load: 25,000 kg For tractor units: 4 x 2 and 6 x 2 Boiler bridge * Low bed designed as an extendable boiler bridge SUPER LOW design * Length approx. 6,850 mm * with mechanical locking * The supply lines are protected in the extendable supports and automatically adjust to the respective low bed length Rear chassis * in short version with closed outer frame and checker plate cover * Chassis with excavator trough, this is closed in the rear half to accommodate the air tanks Axles * BPW axles and suspension, all axles hydro-mechanically forced steered * Technical axle load: 12,000 kg each * Air suspension with Raising and lowering valve Tires * GOODYEAR KMAX T 3PMSF (M+S) 245/70 R 17.5 twin tires. Load index 143/141J (146/146F) Braking system * WABCO brand, EBS-E in accordance with EU regulations, WITHOUT connection cable to the tractor unit Painting * 6-K finishing * Complete steel construction shot blasted after welding * 1 layer of zinc-based base paint * 1 layer of adhesion primer. Final painting with 2 layers of 2-component paint (acrylic) in one color, then sealing the cavities with special wax Color of the trailer * RAL 3002 carmine red * Color of the rims silver gray * Color of the side walls: natural aluminum Accessories included * Steel bulkhead, plug-in, approx. 400 mm high * 3 kW electro-hydraulic unit for controlling the hydraulic processes, with the exception of hydraulic cable winches. Without installation of the supply connections on the tractor unit * Mounting adapter for 1 spare wheel in front of the bulkhead of the gooseneck * Outer support of the gooseneck with mounting holes for screwable lashing rings. The first hole is approx. 200 mm from the front, then approx. every 400 mm * 2 pairs of screw-in lashing rings included (LC 5,000 daN) * 1 lashing ring on the left and right on the rear bevel of the gooseneck (LC 6,000 daN) * 2 inch king pin * Hydraulic crossbeam to support the gooseneck on the tractor unit or a dolly * Air connection with air gun on the gooseneck * 1 pair of steel ramps with climbing strips and fastening bolts to bridge the hooks of the low bed * 1 lashing ring on the left and right on the front cross member (LC 10,000 daN) * On the outer supports of the loading area, preparation for the removable loading floor * Lashing rings with retaining spring approx. every 1,200 - 1,300 mm on the outside of the inner supports of the loading area * Lashing rings with retaining spring approx. every 1,200 - 1,300 mm on the outside of the outer supports of the loading area (LC 10,000 daN) * Recesses on the upper chord of the outer supports above the lashing rings * Mechanical bolt-tab coupling from the low bed to the chassis, for replacing the loading area or installing extension supports. With electro-pneumatic-hydraulic couplings * The outer supports of the low bed are provided with a painted layer of sand as anti-slip protection * 2nd driving height for upper driving position, max. ± 50 mm from the normal driving position, without installing the controls from the tractor unit * 1 pair of lashing rings with retaining spring at the transition from the low bed to the excavator trough (LC 10,000 daN) * Bevel at the front and rear of the chassis, approx. 350 mm x 12°

Condition: used, overall weight: 41,000 kg, maximum load weight: 30,480 kg, axle configuration: 3 axles, loading space length: 17,270 mm, loading space width: 2,550 mm, loading space height: 850 mm, first registration: 03/2023, next inspection (TÜV): 03/2026, Year of construction: 2023, total width: 2,550 mm, total height: 850 mm, Equipment: ABS, HANGLER 3-axle semi-low loader, telescopic, type SDS-H 470 First registered 03/2023, in mint condition Cgeb Hsu Dftvolfrkst Empty weight only 10,520 kg Loading height unloaded approx. 850 mm Fifth wheel height 1,050 to 1,100 mm Gooseneck length 3,650 mm Low bed length 9,770 mm, extendable by 7,500 mm = total low bed length 17,270 mm, movable intermediate support on the telescope Extra-wide package up to a width of 3,000 mm, extendable frame extensions including wooden supports, frame bevel at the rear 8° Continuous U-profile hanging rail for docking ramps Front support feet telescopic Rear support telescopic 4 pairs of container locks recessed in the floor for 1x 40 ft. or 2x 20 ft. containers 9 pairs of stake pockets embedded in the outer frame 2 stake bushing strips, continuous across the width Plastic tool box Ramp storage box 11 pairs of folding lashing rings, each 10,000 daN, freely pivoting in the side frame profile (also suitable for over-width lashing) 11 pairs of lashing holes in the outer frame on the gooseneck (tension belt attachment) 13-fold tires 235/75 R 17.5 SAF axles with drum brakes Air suspension with raising/lowering Offset axle spacing 1,360/1,410 mm 3rd axle TRAILING STEERING WABCO Trailer-EBS with RSS driving stability system Chassis frame front spray galvanized + final coat in RAL 3002 Chassis rear hot-dip galvanized + outer frame visible area finished with RAL 3002 RENTING is the new BUYING, also available immediately for full-service rental-----

Condition: used, overall weight: 97,000 kg, maximum load weight: 69,800 kg, axle configuration: > 3 axles, first registration: 09/2014, total width: 2,750 mm, total height: 2,900 mm, Equipment: ABS, Special low loader for long and heavy transport, the low bed has a loading area of approx. 7,700 mm, plus 5,300 mm telescopic, the low bed can be turned into a platform (length 15,305 mm - telescopic up to 20,605 mm), the loading height as a low bed is approx. 420 mm, the loading height as a platform is approx. 800/900 mm, the low bed can be widened up to 3,200 mm, axles: DOLL panther technology, double wishbone suspension, with hydraulic suspension, 12,000 kg per axle, fifth wheel load 25,000 kg, payloads up to approx. 80,000 kg suitable, only at reduced speed, dimensions without DOLLY axles at the front: length approx. 17,350 + 5,300 mm telescopic, empty weight approx. 21,600 kg, payload up to approx. 69,650 kg, only suitable at reduced speed, new price today approx. 460,000 euros net Our offer is generally without a new TÜV inspection. If a new TÜV inspection is required, we will be happy to make you an offer from our partner workshops! The vehicle can be covered with advertising and/or labeled. Our general delivery and payment conditions apply. Cgjb Hlfovzi Etorkst We would be happy to make you a financing or leasing offer for this object. Please contact us!

Condition: used, overall weight: 65,000 kg, maximum load weight: 49,960 kg, axle configuration: > 3 axles, first registration: 03/2011, Year of construction: 2011, Equipment: ABS, 5-axle Faymonville STZ-5AX low-bed trailer VIN: 011424 Chassis / Attachments: * Air suspension // Lifting and lowering * Gooseneck * 5x steering axles * Jost hydraulic support legs * 5x SAF axles with drum brakes * Tires: 205/65 R17.5 * Remaining tread: 1. approx. 50/30% // 2. approx. 50% // 3. approx. 20/30% // 4. approx. 50% // 5. approx. 30/70% * NATO connector * 1x 7-pin connector on both sides * 2x spare wheel holders * Rotating beacon bracket * Rear supports * Central lubrication system Body: * Low-bed trailer * Extension panels * Extendable to 6.3 m * Widenable approx. 20 cm per side * 11 heavy-duty lashing eyes per side * 5 boost pressure gauges Weights: * Total weight: 65,000 kg * Unladen weight: 15,040 kg * Payload: 49,960 kg Other: * German vehicle * SP 08/2025 ---- New general inspections/safety inspections or weight reductions/increases are available upon request. We are happy to assist you with obtaining export/transfer license plates, and we can also arrange for the transfer of your purchased vehicles within Germany. Contact us!---- We speak the following languages: German, English, and Russian!---- No liability for printing and typing errors, changes, prior sale, and errors excepted!----Who are we? Leible Nutzfahrzeuge is a family-owned company based in Kehl am Rhein. Thanks to our many years of experience in the reconditioning and distribution of commercial vehicles, we are a reliable partner for customers worldwide. Leible Commercial Vehicles' particular strength lies in the sale of new and used commercial vehicles. A wide variety of vehicles can be found on our 11,000 square meter site. Our corporate philosophy is characterized by fairness and reliability. Since customer satisfaction is very important to us, we offer our customers an excellent all-round service package and provide them with a competent contact person who will assist them in the purchase or sale of vehicles. See for yourself! Cgjbsv R N Rno Hlfrkjt Our services for you: Loading vehicles We are happy to assist you with loading your purchased vehicles. Organizing special transports We are happy to assist you with organizing special transports. Day numbers / export license plates We are happy to assist you with obtaining export license plates/short-term license plates. Completing customs formalities We are happy to assist you with customs matters.

Condition: used, overall weight: 48,000 kg, empty load weight: 14,180 kg, maximum load weight: 33,820 kg, axle configuration: 3 axles, loading space length: 6,000 mm, loading space width: 2,740 mm, loading space height: 420 mm, first registration: 08/2004, next inspection (TÜV): 11/2024, color: black, tire size: 245/70R17,5, mileage: 1,001 km, gearing type: other, driver cabin: other, Equipment: ABS, Vehicle location: Bovenden, 3-axle, 1st axle liftable, articulated, forced steering, lifting+lowering, 3-axle hydr. forced steering, ABS (anti-lock braking system), extendable, lashing eyes Body: Extendable to 17.58 m overall length, max. 9 m in drop deck, can be widened to 3.24 m. Hydraulic steering possible via cable remote control. Low loader with retractable gooseneck and 3 hydraulically forced steered axles, 1st axle liftable. ACCESSORY INFORMATION WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! Csb Hlfjqu Uw Norkogt - .

Condition: used, Year of construction: 2024, GVN Trailer 3 Axle Exclusive Lowbed    Please get contact with us for more informaiton;   Cgob Hlfsqxbcnsrket

Condition: used, overall weight: 42,000 kg, maximum load weight: 30,690 kg, axle configuration: 3 axles, loading space length: 15,440 mm, loading space width: 2,550 mm, loading space height: 770 mm, first registration: 09/2023, next inspection (TÜV): 09/2025, Year of construction: 2023, total width: 2,550 mm, total height: 770 mm, Equipment: ABS, 3-axle semi-low loader KÄSSBOHRER Telescopic First registered in new condition Csb Hljvn E Scofrksgt Fifth wheel height 1,150 mm Total length 13,190 mm Table that can be moved on the telescope, width 300 mm Length of gooseneck 3,950 mm Length of low bed 9,240 mm + telescoping 6,200 mm Loading height of low bed only 770 mm Empty weight approx. 11,317 kg Chassis partially metallized, visible sides BPW axles with drum brakes 1st axle LIFT AXLE 3rd axle self-steering WABCO trailer EBS with anti-skid protection RSS Tires 12-fold 205/65 R 17.5 MICHELIN Extra-wide package on 3,000 mm ALUMINUM docking ramps, width 600 mm, length 2,400 mm, load capacity up to 32 tons. Lashing rings: 6 pairs with a load capacity of 10 tons. Heavy load 8 pairs with a load capacity of 5 tons. 6 pairs with a load capacity of 8 tons. 1x long material stand Large tool box at the front behind the bulkhead across the direction of travel (LxWxH) 600 x 830 x 2,310 mm RENT is the new BUYING, also available immediately from us in full-service rental-----

Condition: used, overall weight: 62,000 kg, maximum load weight: 55,700 kg, axle configuration: 2 axles, loading space length: 13,000 mm, loading space width: 2,500 mm, first registration: 06/2011, Heavy-duty transport trailer, load capacity approx. 62,000 kg, loading height: approx. 680 mm, wooden plank floor, 2 x heavy-duty lashing rings per side, 6 x lashing brackets per side, vehicle can be covered with advertising and/or labeled Cgjb Hlfrevnpyqekst

Condition: used, Year of construction: 2024, GVN Trailer 4 Axle Standart Lowbed        Cgob Hljqxbapefrkot Please get contact with us for more informaiton;   

Condition: new, Year of construction: 2024, GVN Trailer 3 Axle Lowbed Cob Hlfoq Di Uvjrksgt Please get contact with us for more informaiton;

Condition: used, Year of construction: 2024, GVN Trailer 4 Axle Exclusive Lowbed        Cgeb Hlfrjqxbfmskjt Please get contact with us for more informaiton;