CNC drilling and milling center

DONAU Danusys 2910

Condition: good (used), Year of construction: 2003, functionality: fully functional, travel distance X-axis: 2,900 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 700 mm, spindle speed (max.): 8,000 rpm, Work table Clamping surface mm 3000 x 1000 Table height mm 750 Number of T-slots 6 Size of T-slots mm 18 Travel distance X-axis mm 2900 Y-axis mm 1000 Z-axis mm 700 Distance top edge of table - bottom edge of spindle Spindle lower edge min/max. mm 150 / 850 Main spindle drive for speed 8000 min-1 AC motor, frequency-controlled kW 16 at 44% duty cycle Speed range: min -1 15 - 8000 Torque at 44% ED Nm 96 constant up to min -1 1500 Feed drives X-axis AC servo motor kW 3.5 Y-axis AC servo motor kW 2.0 Z-axis AC servo motor kW 3.5 Rapid traverse speeds (X/Y/Z): m/min. 30/30/20 Indirect measuring system. Positioning accuracy Positioning accuracy X-,Y-axis to 1000 mm mm ± 0.0150 Repeat accuracy X-, Y-axis mm ± 0.0075 Positioning accuracy Z-axis mm ± 0.0150 Repeat accuracy Z-axis mm ± 0.0075 Tool magazine 2x 24-fold Design as disk magazine - Tool positions 16 - Tool shank (DIN 69871 / 69872) SK 40 - Max. tool diameter Tool diameter mm 76 - Max. Tool length mm 300 - Max. Tool weight kg 8 Kodpfxew E Ey Hs Af Sond Machine control Heidenhain TNC 426 Splash guard cladding Covering of the entire work area, designed as partial area protection in accordance with the valid guidelines of the German accident prevention regulations (UVV) and the European standard EN 12417, with manually operated work area door including electrical protection and interlock. Machine door with polycarbonate glazing. 30 bar high-pressure coolant unit (IKZ) for the use of tools with internal coolant supply, switchable to 19 liters/min at 30 bar or 19 liters/min at 15 bar complete with separate paper band filter. Internal cooling is also possible with air Clean tank capacity l 500 Degree of filtration my 30 Filter capacity l/min. 120 Hinged belt chip conveyor instead of the chip collection tray with integrated coolant tank, ejecting to the right Discharge width approx. mm 300 Discharge height approx. mm 1050 incl. coolant system Tank capacity liters approx. 150 Delivery rate l/min. 30 Pump capacity bar 2.0 HR 410 HEIDENHAIN hand-held control unit External hand-held control unit with built-in electronic handwheel, connected to the machine via cable, for manual movement of the axes, with emergency stop button Grease - central lubrication documentation Operating and programming instructions Hydraulic and pneumatic diagram Circuit diagram Test log

Condition: used, Year of construction: 2004, x-travel 3.000 mm y-travel 1.000 mm z-travel 860 mm Control Heidenhain iTNC-530 table-size 3.600 x 1.050 mm T-slots 7 x 18 T - slots distance 125 mm distance table - lower edge spindle 25-366 mm table weight 4.200 Kg b-axis +-105 ° c-axis +-360 0 rapid travel x/y/z 30.000 mm/min rotary table Durchm. 1.000 mm max. turning diameter 1.400 mm Ksdpfowqr Nlex Af Send number of spindle speeds 9.000 U/min/rpm tool taper ISO-50 DIN 69871-AD spindle drive 28,5 kW max. torque on the spindle 240 Nm tool change unit AITEK, 40 fach 20 handwheel Ink. Shuttle operation Inkl Chip coveyor Ink. Internal cooling system 20 bar total power requirement 65 kW weight of the machine ca. 24,8 t dimensions of the machine ca. 8.056 x 5.496 x 3.790 mm

Condition: ready for operation (used), Year of construction: 2002, functionality: fully functional, travel distance X-axis: 2,000 mm, travel distance Y-axis: 1,250 mm, travel distance Z-axis: 650 mm, total length: 6,500 mm, table length: 2,000 mm, table width: 1,000 mm, total width: 3,600 mm, spindle speed (max.): 12,000 rpm, total height: 4,000 mm, overall weight: 14,000 kg, Equipment: rotational speed infinitely variable, Milling machine retrofitted in 2024 Kodpfoul Txzsx Af Ssnd CNC TNC 530 HEIDENHAIN Distance between columns 1250 mm HSK 63 ELECTROMANDRINO spindle 12.000 rpm INTEGRAL fairing

Condition: ready for operation (used), Year of construction: 2005, functionality: fully functional, A used CNC portal milling machine with carousel turning unit / C-axis for turning Hirth gearing TRAVEL PATHS X: 3,000 mm Y: 2,500 mm Z: 1,000 mm Table diameter: 2,000 mm Knsdpfsvvh T Ssx Af Sed Max. turning diameter: 2,500 mm Max. turning height: 1,000 mm Machine: Uniport 6000 Boring work, also CNC turning, CNC milling and angle head machining. All in one clamping, combined with the speed and precision of a CNC portal milling machine. C-axis for turning New price: €1.8 million Dismantling: by arrangement The machine comes with a protective cover so that no chips get into the Hirth gearing on the slide during milling. Then the rotary attachment head for the turning tools and an angle head for lateral machining on the plate field or on the rotary table. You can swivel this by 2.5° each time over the Hirth gearing. All holders (milling, turning, angle head) are clamped via HSK-100. A radio measuring probe from M&H (Hexagon) for measuring and probing the zero point is included with the machine. The machine is in operation and can be viewed on site. A video of the machine is available.

Condition: like new (used), Year of construction: 2014, functionality: fully functional, Milling, Turning, 5-Axis Simultaneous Machining Siemens 840D sl General X travel: 2300 mm Y travel: 1600 mm Z travel: 900 mm Swivel Head Type: 1-axis continuously adjustable swivel head or full interpolation Swivel movement: via B-axis B-axis swivel range: 0° to -90° Indexing: 0.001° Swivel radius (pivot point to spindle nose): 290 mm Machine Table Clamping surface rotary table: Diameter 1600 mm NC Rotary Table: AXA RTA 6D, faceplate 1600 mm T-slots: 18 mm H9, reference slot H7 T-slot layout: radial/star-shaped T-slot spacing: 80 mm Table load – positioning mode: Max. 5000 kg at max. 10 rpm Table load – rotary mode: Up to 2500 kg Rotary speed: Up to max. 250 rpm Measuring system: Direct measuring system, accuracy +/- 1 second Tool Changer (SK50) Type: Side-mounted chain magazine, located outside the working area Tool holder: SK 50, DIN ISO 7388-1 AD / DIN ISO 7388-3 AD Tool stations: 60 (Tower 1 / 1st chain = 30 places, Tower 2 / 1st chain = 30 places) Max. tool diameter (standard): Max. 110 mm Tool diameter with adjacent stations free: Max. 180 mm Tool length: Max. 400 mm Tool weight: Max. 15 kg per tool Weight in gripper: Max. 15 kg Tool Changer (CAPTO C6) Type: Second magazine chain in XTS turret for turning tools Tool holder: CAPTO C6 Tool stations: Tower 1 / 2nd chain = 12 places Knsdpfx Ajxp Izfef Sod Max. tool diameter (standard): Max. 85 mm Tool diameter with adjacent stations free: Max. 135 mm Tool length: Max. 400 mm Tool weight: Max. 8 kg per tool Spindle & Drives Feed force X/Y/Z: Max. 9000 N Rapid traverse X/Y/Z: 30/30/25 m/min Feed rate X/Y/Z: Standard 1 - 9999 mm/min Power: Max. 56 kW at 40% duty cycle Torque: Max. 355 Nm at 40% duty cycle Speed range: Up to max. 9000 rpm Critical speed: 1500 rpm Other features: Two hinged belt chip conveyors, rear discharge. Discharge height approx. 1250 mm. Internal coolant supply through the spindle. Suitable for coolant pressure up to 30 bar. Complete machine enclosure with powered doors Further details available upon request The technical specifications were prepared to the best of our knowledge. No liability is assumed for correctness. We recommend inspecting the machine. Please call to schedule an appointment.

Condition: used, Year of construction: 2013, functionality: fully functional, machine/vehicle number: 365, Hello, Manufacturer: Michael DECKEL Model: S22 E TURBO - Year: 2013 Condition: Used X-axis travel: 400 mm Y-axis travel: 310 mm Z-axis travel: 305 mm Knsdpfx Aew Udxfsf Sod Workpiece diameter: 260 x 900 mm Grinding length: 400 mm Feed speed: 2000 mm/min Grinding wheel changer: 170 positions Tool changer: 8 positions Speed range: 5000 - 12000 RPM Dimensions: L 2900 x W 1800 x H 2015 mm Weight: 3800 kg Standard wheel arbors and collets included Last maintenance and check-up performed in January 2025 by SIS Machine can be viewed under power

Condition: used, Year of construction: 2012, machine/vehicle number: Z452512A-43368, Drive: Wheel Knedpfetr Nm Ajx Af Sed Empty weight: 7.583 kg Mast: articulated arm Lifting capacity: 227 kg Working height: 1.600 cm Max. horizontal reach: 765 m Transport dimensions (LxWxH): 6.83x1.79x1.99 Please contact PFEIFER GROUP for more information

Condition: new, Extraction capacity of filter unit at spigot*: 2600 m³/h (free-eye) Total power consumption*: 0.62 kW Operating voltage: 400 V, 50/60 Hz,3Ph+PE Noise level*: 66 db(A) Dimensions L/W/H in mm: L 111 / W 508 /H 545 Colour: RAL 7035 Weight: 111 kg Manufacturer: ISI Industrieprodukte GmbH *Depending on filter equipment Special voltage or special colour on request NEW: Pre-filter system (optional) Application: Knsdpfx Ajpkwausf Sed Extraction of oil mist, emulsion mist (for emulsions with higher oil contents) and smoke, for small to very large machine workrooms | Oil mist separator. Your advantages of the ELBARON series: - 18 unit variants available - Direct from the manufacturer - ISI-TRONIC as standard (digitalised filter control) - Electronically controlled EC fan as standard - Speed and air flow rate adjustable - Simplex (single-stage) or duplex (two-stage) available - Wide range of air flow rates available - Adaptable to pollutant load and air performance requirements - Large range of mounting and connection accessories - Quality Made in Germany We have developed the ELBARON® filter series for use in machining operations with pure oil or for separating oil mist and smoke (oil mist separator). For many years now, the digital electrostatic air filters of the ELBARON® series have been among the most efficient filter units on the market and are in use worldwide. Our filter units are already digitalised as Option and can be controlled, for example, with a laptop. The ELBARON® unit series comprises 18 unit variants and can be optimally designed for your application in terms of size and performance. ELBARON® units impress with their long service life and absolute functional reliability. Our electrostatic filter cells are dimensioned in such a way that the best possible filter efficiencies, service lives and trouble-free operation are achieved under economic aspects.

Condition: new, Extraction capacity of filter unit at spigot*: 980 m³/h Total power consumption*: 0.71 kW Operating voltage: 400 V, 50/60 Hz,3Ph+PE Noise level*: 68 db(A) Dimensions L/W/H in mm: L 1290 / W 345 /H 595 Colour: RAL 7035 Weight: 79 kg Manufacturer: ISI Industrieprodukte GmbH *Depending on filter equipment Special voltage or special colour on request Application: Knodpfxoh Rfbqo Af Sjd Separation of emulsion mist, for medium to very large machine workrooms. Your advantages of the COBARON series: - 15 unit variants available - Direct from the manufacturer - ISI-TRONIC as standard (digitalised filter control) - Electronically controlled EC fan as standard - Adjustable speed and air flow rate - Available with a wide range of filters - High-quality filter media in the pre-filter and main filter area - Separation rates of up to 99.95 - Large range of mounting and connection accessories - Flexibly adaptable to the application - Optimum service life - Quality Made in Germany With COBARON, we offer a filter system that meets today's diverse processing possibilities and the resulting pollutant profiles. In the standard programme alone, the COBARON combination filter system offers various filter equipment variants and can thus be variably configured for many applications. The various configuration levels of the COBARON series were specially developed for applications that were borderline cases for many filter systems (mechanical or electrostatic). The combination of both proven filter principles in the appropriate application increases the effectiveness of the air filter and extends the service life. COBARON can be operated as a purely mechanical filter unit with different filter stages - or additionally configured with an electrostatic filter cell. Our filter units are already digitalised as standard and can be controlled with a laptop, for example.

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, travel distance X-axis: 1,750 mm, travel distance Y-axis: 1,400 mm, travel distance Z-axis: 800 mm, table length: 1,200 mm, table width: 1,000 mm, spindle speed (max.): 18,000 rpm, table load: 3,000 kg, CNC Heidenhain TNC 640 TRAVELS Knedpfxjxtqq Re Af Ssd Longitudinal travel: 1,750 mm Cross travel: 1,400 mm Vertical travel: 800 mm A-axis travel: ±185° Feed rate: 35,000 mm/min Acceleration: 6 m/sec² WORK AREA Table size: 1,000 x 1,200 mm Table load capacity: 3,000 kg Table rotation speed: 20 rpm Distance between table and spindle nose: 205–805 mm Maximum horizontal clearance: 1,430 mm Working surface height from the floor: 855 mm ELECTROSPINDLE Power up to: 22 kW Torque up to: 99 Nm Maximum spindle speed: 18,000 rpm Maximum power at: 2,150 rpm Tool holder: HSK A63 TOOL CHANGER Number of tools: 30 Max tool diameter with adjacent pockets occupied: 90 mm Max tool length: 300 mm Max tool weight: 10 kg Tool change time: 15 sec DIMENSIONS Maximum height: 4,200 mm Base module dimensions: 5,650 × 3,350 mm Occupied area: 22 m² Total weight: 20,000 kg Machine equipped with: • 5-axis universal milling head with Direct Drive and continuous movement of both bodies • 30-position tool changer • Left-side chip conveyor • Various tooling • No. 1 magnetic table • Instruction manuals and CE declaration Year of construction: 2015