Standing panel saw

Elcon Advance 215

Condition: new, Technical description:Cutting height: vertical: 0 - 2,150 mm, horizontal: 80 - 2,050 mmCutting length: 5,300 mmCutting depth: 80 mm (with clamps: 55 mm)Saw blade: diameter 303 mm, bore 30 mm, Z = 60 hollow roof toothRotation of the saw blade: 5,000 or: 4 kW (S 6)Required air pressure: 6 barMeasurement readout for horizontal saw cuts:- using a scale from 0 - 2,070 mm- using a strip cutting stop from 75 - 500 mmMeasurement readout for vertical saw cuts:- on a scale from 0 - 1,300 mmExtraction nozzle: 1 x 100 mm 1 x 120 mmEquipment features:- ADVANCE clamping system, consisting of: 2 pneumatic clamping pliers,the motorized on vertical axes on a recirculating ball screw from abovemove down. The tongs carry plates with a weight ofmax. 150 kg- Torsion-free, free-standing machine frame- Round rod guide, vertical and horizontal- Pneumatically evasive slatted frame- Finely adjustable folding stop with stop extension- Fine adjustment for horizontal saw cuts via handwheel- Strip cutting stop- Manual programming rail with 5 slot nuts- Pneumatic immersion of the saw unit- 25 material support rollers- 1 feed roller and 1 feed roller- Pneumatic workpiece clamping device between the support rollers- 3 central support elements, pneumatically folding out- Pneumatic saw head locking- Control panel with template holder- Switch unit on the saw unit: start button, stop button- Tool cabinet- Illumination scale for vertical saw cutsOrder number: ELCO0001 / S013Scope of delivery:Equipment package I, consisting of:- Digital display for the folding stop- Digital display for the saw unit with incremental function- pneumatically swiveling saw unit- Scoring system with controlled counter air nozzle, numerical displayfor setting the scoring or groove depth and activating lightOrder number: ELCO0191 / S085 Kdodpfx Ajvwf Hljdwsg

Condition: good (used), Year of construction: 2002, Edge banding machine with Fuegefraesen otherwise fully equipped PU glue is suitable Kdedpfsgmn H Aox Adweg

Condition: reconditioned (used), Year of construction: 1987, functionality: fully functional, machine/vehicle number: 9673240, grinding width: 1,100 mm, power: 15 kW (20.39 HP), height adjustment type: electric, grinding belt length: 1,900 mm, compressed air connection: 6 bar, grinding belt width: 1,120 mm, Combination sanding unit with contact roller and air sanding pad Kdodpjtppzvofx Adweg Brush roller Pneumatic sanding belt tensioning Motorized thickness adjustment Technical data max. working width 1100 mm max. workpiece thickness 150 mm min. workpiece thickness 3 mm Sanding belt dimensions 1900 x 1120 mm Feed speed 5/10 m/min. Motor power sanding unit 15 kW Motor power height adjustment 0.50 kW Motor power feed carpet 0.5/1.0 kW Operating pressure 6 bar Air consumption approx. 20 l/min Suction nozzle 2 x 200 mm Weight approx. 2100 kg Machine width approx. 1750 mm Machine depth approx. 1700 mm Machine height approx. 1900 mm

Condition: new, Year of construction: 2023, functionality: fully functional, cutting width at rip fence: 1,300 mm, cutting height (max.): 204 mm, main saw diameter: 550 mm, height adjustment type: electric, table height: 910 mm, slide length: 3,200 mm, power: 5.5 kW (7.48 HP), Equipment: motor brake, rotational speed infinitely variable, Altendorf F45 EvoDrive Year of manufacture 2023, new machine - Template holder on the terminal - Extended cutting height, saw blade up to 550 mm, cutting height 204 mm - Motor 5.5 kW (7.5 HP) VARIO (infinitely variable speed control) - Preparation for 2-axis scoring saw - Table top extension 840 mm Kdedpfxevw S Hfj Adweg - Double roller carriage length 3200 mm - Angle miter stop - CNC parallel stop 1300 mm - Front support roller

Condition: used, Year of construction: 2010, Touch screen control for adjusting work groups Panel height mm from 10 to 50 Solid wood 12 mm Pvc/Abs mm from 0.4 up to 3 Feed speed up to 22 m/min Minimum panel length 150 mm Minimum panel width 70 mm Working height adjustable electronically by C.N. Motorized rubberized belt with superior pressure Panel support guide Side roller conveyor with idle wheels for panel support Anti-adhesive group Rectifier group with two motors of 1.5 KW each Reel holder plate COMBIMELT gluing unit for hot melt glue with automatic dosing VarioMelt with pre-melter Patented edge pressure unit with segmented pads Trimming unit with 2 motors Gleaning unit with 2 motors Rounding unit Edge scraper unit Installed power KW 13.7 Machine length mm 6170 approx TECHNICAL DETAILS TO BE CHECKED Kodpfjpzfcgex Adwedg

Condition: reconditioned (used), Year of construction: 2007, functionality: fully functional, cutting length (max.): 5,750 mm, cutting height (max.): 120 mm, cutting width (max.): 2,600 mm, main saw diameter: 460 mm, power: 27 kW (36.71 HP), Machine type: fh6 580 HT260 ERB-L / MCS-Evolution / Win 10 Cutting length: 5.750 mm Cutting width: 2.600 mm Year of construction: 2007 Saw blade projection max .: 135 mm Saw blade diameter max .: 460 mm Main saw motor: 27 kW Scorer aggregate Scorer saw blade diameter max .: 200 mm Package height max .: 120 mm Package height min .: 3 mm Saw aggregate forward: 6 up to 150 m / min Saw aggregate backward: up to 150 m / min Feeder: up to 80 m / min (Europe: forward 25 m/min acc. EN 1870-13) Number of clamps: 8 pcs grip push clamp Clamp opening: 125 mm Lifting / lowering device for clamps Strip aligner before and after the pressure beam Air cushion tables: 1 pcs. (2100 x 700 mm) Turn table: 1 pcs. (5800 x 2200 mm) 90° turnable Machine table: heavy-duty steel construction „Closed Frame Construction“ machine table surface is precision machined Machine table lips Automatic cutting length adjustment Lift table, max. panel width: 2600 mm Feeding roller conveyor: 7100 x 2600 mm Recesses for forklift trucks: 2 pcs Frequency converter for feeding roller conveyor Positioning stop: 2 pcs Push-off trolley Push-off device: 3 pcs Book aligning device for longitudinal board edges: 3 pcs Retaining device: 3 pcs Roller table Cross alignment stop at the roller table This machine is in very good conditions and works very well. The machine is reconditioned, checked and tested in our company. Errors and alterations in the technical datas and informations excepted! (displayed photos are symbol photos) Ksdpfevx Ru Dox Adwodg

Condition: reconditioned (used), Year of construction: 1991, functionality: fully functional, grinding width: 1,100 mm, "M.-No. 2679, built 1991, Technical data: max. working width: 1100 mm, min./max. workpiece thickness: 3 / 160 mm, sanding belt dimensions: 2150 x 1120 mm, sanding belt speed: 18 m/sec., feed speeds: 4 + 8 m/min, Motor power sanding unit: 11 kW, power setting: 0.55 kW, feed carpet: 1.3/1.8 kW, operating pressure: 6 bar, air requirement: 10 l/min., extraction sockets: 1 x 150 + 1 x 120 mm, WxDxH: 1800 x 2000 x 2100 mm, weight approx. 2400 kg, Standard equipment: - Contact roller D=150 mm, hardness 90° Shore - Air sanding pad with automatic insertion and removal - Rigid sanding pad for solid wood frame sanding - Brush roller driven by the sanding unit - Automatic centering of the feed carpet - Feed carpet with high-quality rubber circular hole carpet and auto. Carpet centering - pneumatic sanding belt tensioning with length compensation - non-contact sanding belt oscillation, electronic - low-wear disc brake system for immediate stop of the sanding belt drive with pressure monitor - motorized thickness adjustment with digital display - workpiece thickness limiter at the infeed - semi-automatic workpiece thickness adjustment - grit thickness compensation for contact roller 4-fold, special accessory: workpiece thickness gauge". Kedpfx Adjtppz Iswjdg

Condition: new, bore capacity in steel 30 mm threading cutting capacity: M20 throat 260 mm bore stroke 125 mm spindle taper MK 3 spindle turning speed range 80 - 1440 / 180 -3200 U/min transmission ratio 2 Stufen column diameter 110 mm table surface area 500 x 365 mm total power requirement 0,8 / 1,4 kW weight of the machine ca. 0,27 t dimensions of the machine ca. 0,4 x 1,2 x 1,9 m Equipment: - Gears made of hardened and ground steel - Front speed selector lever - Gear lubrication by automatic oil pump - Integrated coolant device - Machine lamp Kjdpfx Aofg U Tpsdwsdg - Rotatable and tiltable table - Automatic feed with electromagnetic clutch - Handwheel for manual fine feed - automatic tool ejector - Integrated electrical controls in the drill head - Pushbutton for EMERGENCY STOP - Switch for right / left rotation - Height-adjustable chip protection hood with microswitch - CE mark

Condition: like new (used), functionality: fully functional, cutting length (max.): 3,100 mm, cutting height with scoring (max.): 70 mm, saw blade diameter: 305 mm, feed rate X-axis: 40 m/min, feed rate Z-axis: 50 m/min, total length: 3,100 mm, total width: 3,100 mm, overall weight: 3,000 kg, power: 7 kW (9.52 HP), space requirement length: 3,100 mm, space requirement width: 3,100 mm, Equipment: rotational speed infinitely variable, scorer, Panel Sizing System SCHEER PA 4136 – 3100 x 3100 The PA 4136 is a high-performance, electronically controlled panel saw designed for precise, efficient, and automated cutting of wood-based materials. Ideally suited for industrial applications in joineries, furniture production, and panel processing. Kedpfswrn Efex Adwsdg Condition & Service: Condition: Very good Functionality: Fully operational Warranty: 12 months CE-compliant and dust-tested (limit value < 2 mg/m³) Key Technical Data & Equipment: - Rip saw FM 20-3100 with hardened guides - Automatic forward & return travel of the saw unit (automatic lowering during return) - Feed drive via three-phase gear motor, frequency inverter controlled - Feed speed: 2 – 40 m/min (stepless) - Return speed (rapid traverse): 50 m/min - Extraction channels in machine base & pressure beam - Score saw blade adjustable externally (without opening the hood) - Safety hood locking with lamella curtain SZ 5008 - 3-step cutting height adjustment LA 4143 - 6 cut-out sections in the pressure beam for residual cuts down to 5 mm - Saw motor: 7.0 kW | Scoring motor: 1.1 kW (switchable) - Cutting length: 3100 mm | Cutting height: 70 mm Material Handling & Feed: - Angle pressure device WP 5003 with clamping claw for cross cuts - Adjustment range: 2400 mm - Fully automatic control via DNC-AT - Material feed table HP 5091 - 2 upper guides, rack-and-pinion guidance - Servo drive for material pusher - Feed speed: 25 m/min (safety limited) - Return: 40 m/min - 6 clamping fingers, 4 double roller tracks - Table length: 3100 mm | Fence depth: 3150 mm - Closed Pertinax surface in the area of the angle fence Control & Operation: - Operating system: Ubuntu Linux - Integrated PC with hard disk, parallel & serial interfaces - Network capable (LAN/WLAN), remote maintenance via internet (TeamViewer, Remote Desktop) - USB printing function - Multilingual dialog programming - 15" flat screen, multifunction keyboard on a swiveling control console - Graphic display of cutting plans and processes Software / Programs: - OPTIMAX: Office optimization, waste calculation, material requirements - OPTIMIN: Direct optimization at the machine PC with parts list entry - Processing via USB, diskette or online (optional) - Manual, automatic & special operation modes (e.g. grooving, veneered parts) Additional Equipment: - Angle fence table HP 5085: 1,720 x 800 mm | Pertinax overlay - Workpiece support table HP 5025: 1,720 x 800 mm | Pertinax overlay - Air cushion system LK 5030 integrated in both tables - Circular saw blade KSB 4005: Ø 305 mm, Z = 60 - Circular saw blade KSB 4006: Ø 200 mm, Z = 60, tapered Reliability in Continuous Operation: This machine is in use worldwide – under extreme conditions. Whether in the dry climate of Africa or in high humidity regions of Southeast Asia (e.g. Thailand): The PA 4136 runs reliably in 3-shift operations – 365 days a year – and stands out for its outstanding stability and durability. Warranty: We are so convinced of the quality and stability of our machines that we offer a 7-year warranty on the machine frame and guideways. (Excludes electronic supply parts and wear parts.) 📞 Contact us for an individual offer or to arrange a viewing appointment. Machine available from stock. Delivery, commissioning, and training available upon request.

Condition: used, Year of construction: 2019, Used machine Year of manufacture: 2019 Equipment and technical data: Cutting height: vertical 2,150 mm, horizontal 2,070 mm Cutting length: 5,300 mm Cutting depth: 80 mm Saw blade: diameter 303 mm, bore 30 mm, Z=60 alternate top bevel teeth Saw blade speed: 5,000 rpm Motor: 5.5 kW Kodjwka Ntjpfx Adwodg Required air pressure: 6 bar Measurement readout for: - horizontal cuts: via scale and strip cutting stop - vertical cuts: via scale from 0 - 1,300 mm Extraction port: 100 mm 5 material support rollers per meter of cutting length 1 infeed and 1 outfeed roller Pneumatic workpiece clamping device between the support rollers 1 central support element per meter of cutting length Twist-resistant, freestanding machine frame Pneumatically retracting slatted frame Round bar guide vertical and horizontal Fine-adjustable folding stop Fine adjustment for horizontal cuts via handwheel Strip cutting stop Manual programming rail with 5 T-nuts Pneumatic plunge of the saw unit Pneumatic saw head lock Control unit at the saw assembly: start button, stop button Operator panel with template holder Electronic digital display for the saw unit Electronic digital display for the folding stop Automatically swiveling saw head Location: Flörsheim Availability: short-term