Shock test chamber

Heraeus HT 7012 S2

Condition: excellent (used), Heraeus shock test chamber Here we offer a shock test chamber. Temperature shock test chamber water cooled Two-chamber design Warm chamber: The temperature range of the warm chamber is from +50°C to +220°C. Temperature deviation temporally in useful chamber center ± 1 K Temperature deviation spatially ± 2 K Temperature change rate heating 11 K/min cold chamber: the cold chamber from -65°C to +70°C Temperature deviation temporally in useful space center ± 1 K temperature deviation spatially ± 2 K Temperature change rate heating 2 K/min cooling 3 K/min Test chamber volume 125 liters Temperature range hot chamber +50°C to +220°C Temperature range cold chamber -80°C to +70°C Test chamber dimensions width 470mm depth 650mm height 410mm Outer dimensions width 930mm depth 2115mm height 1970+mm Rated power 10 kW Rated current 25 A Voltage: 3/N/PE AC 400V +6/-10% 50Hz Refrigerant R404A / R23 Weight: 1000 kg For you as a buyer for safety the following information! Hodpfsikvlxox Ag Noi The following points are carried out on our offered chambers in advance: 1. functional check and replacement of necessary components 2. new filling with legally compliant refrigerant 3. leak test with certificate 4. after successful inspection, the chambers are subjected to a test run, which is monitored with calibrated equipment. Type: HT 7012 S2 Condition: used / used Scope of delivery: (See picture) (Changes and errors in the technical data, specifications are reserved!) Further questions we can answer on the phone for you.

Condition: used, Column drilling machine ALZMETALL type AB 4 SV Machine no. No. 14805 Year of construction approx. 1980 drilling capacity 40 mm Spindle holder MK 4 - short quill Hjdpfen N Ekcox Ag Nsi throat 340 mm Quill stroke 180 mm Table size 710 x 560 mm Column diameter 160 mm Spindle speed 30 - 765 rpm infinitely variable Motor power 2.3 and 3.4 kW pole-changing Mains connection 380 Volt, 50 Hz - Spindle speed via 2 motor speeds and infinitely variable via variator gearbox - Reduction gear with 2 gear stages for high torque at low speeds - Spindle on/off via rotary switch or electric foot switch - Automatic feed 0.1 - 0.2 - 0.3 mm/rev - Table height adjustment via hand crank - Machine base with machined workpiece support surface - LED lighting device Space requirement L x W x H 1200 x 725 x 2050 mm Weight 615 kg good condition

Condition: new, Year of construction: 2025, 0330 mm 210 mm 1000 mm 167 mm Hsdjwp Tq Uopfx Ag Nji 40 mm 2,2 kW

Condition: new, High quality benchtop bending machine with top of the line features. Hedpfxji Hp Ere Ag Nsi FLOTT TB 18 Plus (218303) Standard equipment: - Thread cutting device - Control panel with OLED display - Robust, high quality drill head hood with ergonomically inclined front - LED illumination - Quickly adjustable and ergonomic drill depth stop - Infinitely variable speed control via central rotary knob - EMERGENCY STOP button - Thermal overload protection - Spindle stop - Drill protection with electrical fuse - Connection cable with Schuko plug - 3 years warranty for one-shift operation Technical data: Continuous/normal drilling capacity (mm): 18/20 (in E335/ST60). Tapping capacity (depending on pitch): M12 spindle: MK II drilling depth (mm): 100 throat depth (mm): 240 column diameter (mm): 82 Usable working surface (W x L) (mm): 340 x 280 Speed display: Digital Drilling depth display: Digital Drilling depth stop: Quickly adjustable stop ring Feed (mm/rev): by hand Table height adjustment: with toothed rack motor three-phase current - frequency controlled, mains connection 230 V (kW): 0,75 spindle speed stepless (1/min): 30 - 3000 T-slot size (arm), distance (mm), dimension width (mm): number 2, 125, 13/26 spindle/working surface (mm): 155 - 415 (table), 155 - 550 (foot) machine dimension without packing (mm): 355 x 705 x 1065 machine dimension with packing (mm): 570 x 940 x 1612 weight (kg): 170 Note: For all other models, please feel free to contact us.

Year of construction: 2006, condition: ready for operation (used), Travel X/Y/Z: 800mm/800mm/800mm, feed force X/Y/Z: 15000N/15000N/17500N, feed speed X/Y/Z: 50m/min, max. rotary table speed: 25rpm, spindle diameter: 100mm, tool holder: HSK 100, spindle power S1-100%: 40kW, spindle speed: 6000rpm. Magazine capacity for a maximum tool diameter of 280mm: 23. Max. pallet dimensions X/Y: 630mm/630mm, max. pallets in the system: 6, coolant tank volume: 1500l, 50bar high-pressure pump delivery rate: 22l/min. Machine dimensions X/Y/Z: approx. 6300mm/4900mm/4000mm, weight: approx. 19,300kg, control: Siemens 840D powerline, operating hours: 74,637h. Includes integrated tool monitoring IPM, remote diagnostics via modem, Renishaw MP10 touch probe, RSP 4-position round storage, chip removal, coolant system with Knoll VRF 250 vacuum rotary filter, pallet changing device, 6 pallets, 4 of which are clamping towers with universal clamping bars, approx. 100 HSK 100 tool holders, and Losma filter system. Documentation available. On-site inspection is possible. Expected to be available from the end of January 2025. Hedpeuxdhujfx Ag Nei

Condition: refurbished (used), machine/vehicle number: 1500/R, Loading mechanism with test force 1-187.5 kg -Brinell 15,625 7 31.25 / 62.5 / 187.5 Hjdpfedb E Tfex Ag Nsi -Rockwell HRA / HRB / HRC Scope of delivery: -Hardness tester -Focusing screen -Fresnelllinse -Vertical illuminator -Thread spindle with feeding system -Lighting device - lens 70 X -Evaluation unit - ball holder with ball Ø2, 5 mm Brinell -Diamond cone 120° Rockwell -Bench plan Ø80mm -Edition of Prism Ø80mm -Power cable Optional: -BVMS software (see 3-rath.de)

Condition: new, Centre length ----- 1000 mm Hodpfsga Ty Ejx Ag Nsi Centre height ----- 180 mm Swing diameter ----- 360 mm Main spindle bore ----- 40 mm Bed width ----- 260 mm Spindle speed ----- 40-1800 rpm Motor ----- 2.4 kW Weight ----- 1350 kg INCLUDES * 3-axis digital readout brand SINO * Quick-change toolholder type Multifix TOOE5 with 4 tool blocks * 3-jaw chuck 200 mm * 4-jaw chuck 200 mm * Faceplate 250 mm * LED work lamp and coolant system * Fixed and travelling steady rest HEAVY-DUTY DESIGN WITH CAST IRON BASE

Condition: reconditioned (used), Year of construction: 1984, Universal Tool Milling Machine DECKEL FP 3 With 3-axis active digital display Heidenhain TNC 11 Year of manufacture: 1984 Travel: X 500 / Y 300 / Z 400 mm Speed range: 25 – 2500 rpm Including the following accessories: - Rigid angle table, 850 mm x 400 mm clamping surface - Swiveling rotary table Ø 450 mm with dividing disks - Slotting head - Movable vertical milling head - Extendable quill for drilling - Infinitely variable feed via potentiometer - Various milling arbors SK 40 / S22 x 2 - Chip tray - Automatic central lubrication pump for X, Y, Z axis - Machine lamp - Coolant system - 4 machine feet Hodsxuh Rdopfx Ag Nsi - Operating manual

Condition: new, travel distance X-axis: 2,000 mm, travel distance Y-axis: 1,200 mm, travel distance Z-axis: 800 mm, feed rate X-axis: 30,000 m/min, feed rate Y-axis: 30,000 m/min, feed rate Z-axis: 30,000 m/min, table length: 1,900 mm, table width: 1,100 mm, spindle speed (max.): 6,000 rpm, table load: 4,000 kg, position of the milling head: Vertikal, torque: 1,356 Nm, spindle nose: SK 50 - DIN 69871A, Equipment: rotational speed infinitely variable, BRAND NEW GANTRY MILLING MACHINE Control and Motors: HEIDENHAIN TNC 640 digital path control HEIDENHAIN 19" TFT display HEIDENHAIN package (motors, measuring systems, electronic handwheel) Spindle Power: Hedpfx Asq Ixc Teg Noi Maximum spindle motor power: 30 kW ICS: Internal coolant supply, 70 bar Additional Equipment: Tool changer with double gripper, 60 positions Double screw conveyor (longitudinal) Hinged belt chip conveyor (transverse) Preparation for 4th axis (rotary table) Full enclosure, closed at the top Accuracies: Positioning accuracy: ± 0.025 mm Repeatability: ± 0.020 mm Only inquiries from Germany will be answered.

Condition: new, table length 1200 mm table width 1200 mm table height 840 - 890 mm Hsdpfxepk Iv Us Ag Noi weight of the machine ca. 0,32 t Welding table / perforated table: Hole diameter: 28mm The table is made of 15mm thick, high-alloy steel S355 JR T = 15 The surface is untreated. Sidewalls 165mm height adjustable from approx. 880 - 980mm Ribbed underside for reinforcement. including floor storage Accessories optional !! Surface flatness 0.2 - 0.4mm on 1000mm. The table can be moved with a pallet truck. Pallet truck is not included in the scope of delivery