Edgebander

HOLZ-HER SPRINT 1411

Condition: ready for operation (used), Year of construction: 2019, This SCM Class SI 400EP panel saw was manufactured in 2019. It features a maximum saw blade diameter of 400 mm and a cutting width on rip fence up to 1500 mm. The sliding table saw offers a squaring stroke of up to 3800 mm. Ideal for precise wood panel cutting. Contact us for more information. Fsdpfoyabkvox Adasfw • Machine Condition: Very good • Maximum Saw Blade Diameter (with Mounted Scorer): 400 mm • Maximum Saw Blade Projection from Table at 90° / 45°: 140 / 97 mm • Cutting Width on Rip Fence (Rip Capacity): 1000 – 1500 mm • Maximum Squaring Stroke of Sliding Table Saw: 3200 – 3800 × 3200 mm • Three-Phase Motor Starting From: 7 kW (8 kW) / 50 Hz (60 Hz)

Condition: excellent (used), Robland 3200 silver line format saw with a trolley Fsdev S Hy Aepfx Adajfw scoring saw with a separate engine, trolley length 320cm main engine 7KW 3 speeds max disc 450mm 0-45 tilt electrically adjustable with readout up-down saw electrically adjustable without readout culaga on the right side motorically adjustable up to 1240mm digital readers on the culaga on the trolley angle device included Branded machine in very good condition,

Condition: excellent (used), Equipment: scorer, Electric adjustment of saw blade height and angle; scorer. You can call or write to us. We can speak and write in German and Russian. You can also send messages in English. Fjdpow Ix Aljfx Adaofw

Condition: used, machine/vehicle number: 006835, Type of edging: Thin edge, Thick edge Trimming Unit: yes Ffedpsrl Utbefx Adasw Max Panel Length: 55 mm

Condition: new, Year of construction: 2022, New machine Year of manufacture: 2022 Standard Equipment: - Electrically powered height and tilt adjustment (0–46°) with automatic correction of cutting height during tilting - Eye-level, swiveling control panel - Double roller carriage, carriage length 3,000 mm - Manually adjustable rip fence with scale, including manual fine adjustment, max cutting width 1,000 mm - Crosscut fence with fixed 90° position, manually adjustable via scale up to 3,200 mm - Max saw blade projection: 150 mm - Max saw blade diameter: 450 mm - Drive power: 4 kW (5.5 HP) at 4,000 rpm - AKE main saw blade clamping system - Working height: 91 cm Motor 5.5 kW (7.5 HP) with VARIO F45: - Stepless speed control from 2,000–6,000 rpm - Precise speed adjustment to the material increases cutting quality and blade service life Extended Cutting Height for Single-Side Tilting: - This option enables single-side tilting with a large extraction hood for max blade Ø 550 mm and a blade projection of up to 204 mm - In combination with a scoring unit: max blade Ø 500 mm / max cutting height 179 mm - Only available in conjunction with at least 5.5 kW (7.5 HP) drive power 2-axis Scoring Unit for Tilting: - With motorized height and lateral adjustment, programmable scoring blade height with quick lowering and raising - Drive motor 0.75 kW (1 HP), 8,200 rpm - Retrofitting only possible on machines prepared for the scoring unit LED Lighting: - Highly energy-efficient LED technology for clear marking of the scoring area The Altendorf double roller carriage is renowned for its smooth operation and precision run. It can be locked steplessly in any position. The large double rollers, precision-manufactured from hardened steel, ensure the upper carriage remains absolutely accurate in conjunction with the lower carriage on the hard-chromed guide bars. This running quality is maintained even after decades of heavy use and exposure to dirt. The carriage construction features a highly rigid, torsion-resistant multi-chamber design. The table surface is finely planed and anodized. A hard-chromed round bar in the upper carriage serves as both the mount for the cross-slide and the interface for various accessories. The entire unit is low-maintenance and does not require lubrication. Fjdew I Uxcspfx Adaefw On/Off Switch on Double Roller Carriage: - The on/off switch on the double roller carriage is always within easy reach. With four buttons, both the main saw blade and the scorer can be switched on and off, saving time and increasing safety. Angle/Mitre Fence, Crosscutting up to 3,500 mm: - This Altendorf-patented fence with integrated length compensation makes it easier to cut angles and mitres precisely in a single operation. In both positions, the swivel angle is steplessly adjustable by up to 49° and displayed on a scale. The play-free and robust stop flaps can easily be moved and adjusted as a single flap over the entire area up to max. 3,500 mm.

Condition: excellent (used), Year of construction: 1999, beautiful veneer saw with planing unit cutting length 3100 mm Ffsdoq Rb Irspfx Adaow with rear fence

Condition: reconditioned (used), Year of construction: 1993, functionality: fully functional, Weight approx. 1140 kg Connected load 380V 7.5kW Scoring unit 0.75 kW manually adjustable via pneumatic connection, can be raised and lowered Trimming length 2800 mm speeds 600/5000/4000/3000 rpm via V-belt Electric tilt with digital display Fjdpfx Aeq Au Hujdasfw Electric height adjustment with digital display Cutting width 1000 mm rear support table 950 x 400 mm wide angle fence 2500 mm with extension 2840 mm with 2 stops suction connection 120 mm + 80 mm for PSV Parallelogram protection device with narrow and wide hood Trimming fence Air requirement for scorer 6bar connection

Condition: used, Holz Her STREAMER 1057 XL FÜ + PU Edge thickness: 0.4 - 6 mm Modern control unit with selector switch for aggregate settings Fully automatic edge magazine for roll and strip material Glue application station GLU-JET cartridge + PU bonding Adhesive application via nozzle technology Touch-sensitive nozzle Ffsdpfjx Ux U Asx Adajw Workpiece height: 6-60 mm Automatic glue height adjustment High-quality 3-roller pressure unit, 1st roller motorized Pneumatic end trimming unit for roll and strip material up to 6 mm edge thickness Pneumatic adjustment of trimming saws from 0-10° angle Milling unit: flush trimming 6 mm, radius milling - bevel milling - 15° Corner copying unit - 3 mm edge thickness Scraper unit for chamfers and radii with 2 scraper holders Surface scraper unit - finish Buffing unit Spraying device in infeed and outfeed areas, as well as for PU Machine supplied with all working units/tools Machine is WORKSHOP TESTED First delivered in 2016 Available ex stock Lieboch

Condition: used, Year of construction: 2000, With electric height and tilt adjustment Used, excellent condition, little used Make Altendorf Type F45 Year of manufacture 2000 Machine number GS-tested Motor 4 kW Steel guides Carriage length approx. 3000 mm Cutting width approx. 1050 mm Pivoting up to 45° Prepared for scoring unit Parallelogram guard Fodpfx Adjvxlq Hsaofw Tabletop extension Anodized aluminum parts Electric height adjustment Electric tilt adjustment Digital display: - Cutting angle - Speed Extraction connection D 120/80 mm Space required approx. 3010 mm x 1800 mm x 1500 mm Weight approx. 1000 kg Storage location 97447 Gerolzhofen, free on load, unpacked Sold in the current condition as seen, without warranty or guarantee

Condition: good (used), functionality: fully functional, Tested, functional equipment, used edge bander BIESSE Polymac model LATO 38 - Glue pot - Guillotine - Front/back trim - 1 tiltable top/bottom flush trimming - 2 tiltable top/bottom flush trimmings Ffsdpsuhm Adsfx Adaew - Exit brushes Possibility to test at our facilities Machine visible in our Cosne workshop Price includes loading onto truck