SINGLE SIDE EDGE BANDER - BATCH ONE

HOMAG TBR 100 + KAR 350 + TFU 200

Condition: excellent (used), SINGLE-SIDE EDGE BANDER (LEFT-side) Edges (band in rolls) thickness (Min/Max) mm 0,3 - 3 Edges thickness in stips / lippings (min/max) mm 3 - 12 Nodpfxeflc Uhj Aadjdd Panels thickness (min/max) mm 8 - 60 Numerical Control ICOS open TS Feeding speed (adjustable) m/min 4 - 20 Top pressure system with rubber belt Spraying unit (Anti-sticking liquid) Pre-milling Unit (vertical joint trimmers) 08.376 (2 x Kw 3) Glueing Unit (Hot Melt Glue) 283.1513 Band Pressure zone Edge coils supporting unit (reels N°) 1 Snipping (end-cutting) unit 08.415 (2 x Kw 0,66) Fine Trimming unit 08.055 (2 x Kw 1) 0°-30° Multi Function Unit (Profile contour Trimming unit) 08.342 (2 x Kw 0,66) Profile edge scraping unit 08.519 Glue scraping unit 08.50 Buffing unit 08.612 (2 x Kw 0,25) Free space

Condition: like new (used), Year of construction: 2017, Technical data: Working length: 1270 mm Distance between the columns: 1000 mm Pressing force: 60 to CNC control: CYBELEC ModEva Controlled axes: Y1 / Y2; X; R Number of stop fingers 2 pcs. Stroke: 275 mm Motor power: 7.5 kW Working height: 920 mm Light barrier: FIESSLER CE mark Dimensions (length x width x height): approx. 3250 x 2500 x 2600 mm Weight: approx. 4.5 tons Accessories: 1 set of tools Condition: as good as new, very little used Machine comes from a vocational school Nodpfx Aevxincjadjdd

Condition: refurbished (used), FULL LINE of Drilling, max working width mm 3200, with fast automatic handling equipment. Composed of the following machines: A) LOADER (Portal) "RBO" Winner C 3200 with double pick-up and central motorized rollers table. With 2 on-ground motorized rollers ways to in-feed the piles (stacks) of panels to loader. B) TRANSFER (Connecting Rollers Table with 90° conveyoring belts) “RBO” Mod. Transfer TA 90° C) 1st Auotmatic BORER "BIESSE" Mod. Techno FDT Nsdpedfgg Iofx Aadedd with No. 2 Horizontal Units + No. 7 Vertical Bottom Units D) 2nd Automatic BORER "BIESSE" Mod. Techno FDT with No. 2 Horizontal Units + No. 7 Vertical Bottom Units E) TRANSFER (Connecting Rollers Table with 90° conveyoring belts) “RBO” Mod. Transfer TA 90° G) UNLOADER-STACKER (Portal) "RBO" Winner SC 3200 with double pick-up, with double storage station, with central motorized rollers table. With 2 on-ground motorized rollers ways to out-feed the piles (stacks) of panels from the Unloader

Condition: used, mileage: 1,99,227 km, power: 335 kW (455.47 HP), fuel type: gasoline, gearing type: automatic, first registration: 07/2016, emission class: euro6, color: grey, number of seats: 5, Equipment: ABS, air conditioning, all wheel drive, central locking, electronic stability program (ESP), immobilizer system, navigation system, * Panoramic roof * Leather seats, Nappa * LED headlights, high performance * Navigation system "Command" * 4 - Matic * Automatic "9-speed" * Head-up display * Digital instrument cluster * Airmatic DC / Air Body Control (air suspension) * Ambient lighting * Blind spot assistant * Lane keeping assistant * Collision warning system with braking function (Collision Prevention Assist) * Driver assistance system: Hill start assist * Driver assistance system: Traffic sign recognition * Interior: poplar wood * 360 degree camera system * Keyless-Go package * Comfort automatic climate control (Thermotronic) * Multifunction leather steering wheel with shift paddles * PDC, front and rear with reversing camera * Electric. Tailgate * Alloy wheels * Memory package * Active parking assistant * Trip computer / on-board computer * Tire pressure monitoring system * Rain sensor * Light sensor * Power locking for doors and tailgate / boot lid * Seat comfort package * Seat heating * Seat climate * Start / Stop * Burmester surround system * Light package * Automatic headlight switching * Cruise control * Tinted glass * Fog lights * 4x electric. Window lifter * Electric, heated and foldable exterior mirrors * Through-loading option * Brake assist Plus * Central locking - radio remote control with 2 keys * 1st hand * Full service history, with no gaps at MB * Last service at 175,278 km Vehicle number: 121 ONLINE CONSULTATION / ONLINE VIEWING / ONLINE PURCHASE AGREEMENT / TRADE-IN OF YOUR USED CAR OR TRUCK / DELIVERY FOR AN EXTRA CHARGE Due to the current situation, we are offering you a delivery service. Customers from abroad have the option of paying a deposit on the vehicle and picking it up at a later date. Customers who have purchased the vehicle can pay a deposit and collect it at a later date. Can you please tell us about the delivery date? the delivery of the vehicle in the designated area Foreign customers have the possibility to make a partial payment and picking up the car at a later date ????? ?-?? ????? ????? ????? ????? ????? ????? ????? ????? ????? ????? ????? ????? ?????. Can customers within the cordon be? paid for by the transport company and picked up at a later date. NET export possible. (for vehicles with deductible VAT) ---- We are happy to take care of your vehicle registration (Düsseldorf) and the creation of customs / export license plates or transfer license plates (5 days). Complete export processing possible. (Export declaration / EUR 1 certificate etc.) ----Vehicles with TÜV used car report possible. We would be happy to make you a financing offer that suits you. Financing also possible WITHOUT A DEPOSIT. (Depending on age, mileage and condition) ----On request, we would be happy to offer you our "GPG" used car insurance with individual solutions specifically for you and your vehicle. ---Trade-in possible. ---If you have any further questions, please do not hesitate to contact us by phone. Opening times: Monday to Friday from 9 a.m. to 5 p.m. ----Subject to changes, typos, errors and prior sale. Offers are non-binding. All information without guarantee. Vehicle descriptions are expressly not guaranteed properties. Ndjdpfx Aaowtvmysdsd

Condition: used, Year of construction: 2014, ⚡️ Top service ⚡️ Fast delivery ⚡️ Great support! Nsdpoiivq Uefx Aadjdd ✳️Keep your liquidity! We offer a variety of financing models to ensure your investment has the best chance of success. Contact us today to learn more about our hire-purchase, warranty or lease programs. ✳️ ✨✨Buy directly from the manufacturer and secure the price and quality advantage!✨✨ Benefit from Proton's 40 years of experience in surface coating technologies. ➖➖➖➖➖ ✅Content of the facility ►1 piece - Gas-heated large powder furnace ►1 piece - Automatic powder coating booth ►1 Piece - Electrically Heated Small Powder Furnace ►1 piece - Manual monocyclone powder coating booth ►1 piece - room type monocyclone manual powder coating booth ►1 piece - Automatic chemical pre-treatment and drying system ►6 pieces - Automatic powder coating gun ►3 Pcs - Manual Powder Coating Gun ►1 piece - Automatic powder recovery unit ►5 pieces - monocyclone ►1 piece - Automatic control panel ►1 Piece - Automatic Rod Movement System Speed ​​Controlled ►2 Pieces - Movable Platform Speed ​​Controlled ►12 pieces - parking station ►300 m - conveyor rail ►12 pieces - hanging rods Our facility is located at Anhaltstrasse 30, 14943 Luckenwalde. You can make an appointment to view the machines. The system has been in use for 8 years. Since we are the direct manufacturer of the plant, we can make the changes you want to the machines by mutual agreement. It does not fit into your existing assembly space? Then we can make changes to the layout. Please check the system PDF file using the link below.

Year of construction: 2001, condition: ready for operation (used), DOUBLE SQUARING EDGER 1ST LONGITUDINAL PASS 2ND TRANSVERSE PASS OPENING 3200 MM LONG PANEL INFEED Ndjdsf Atm Hepfx Aaded BELT PRESSER LEFT AND RIGHT SIDE MIRROR COMPOSITION: ANTISKID SPINDLE MOULDER DOUBLE SPINDLE MOULDER SPINDLE MOULDER GRINDING / OTHER GLUING WITH - VERTICAL MULTI-ROLL 6 EDGES - NEW SPECIAL POLYURETHANE GLUE TANKS - DRAWERS INTESTATORS SGROSSERS SPIGULATORS ROUNDERS WITH 4 MOTORS SPINDLE MOULDERS FOR SLOTS / REBATES / CHANNELS / PROFILING EDGE SHAVERS GLUE SCRAPER SPACE FOR OPTIONAL UNIT (BRUSHES / HAIR DRYER / OTHER)

Condition: good (used), White Type: SC/KWT 450 Salt spray chamber Technical data: Test chamber capacity 450 liters Nodpsudvg Rsfx Aadsdd Max. load 100 kg Brine storage tank 180 liters External dimensions: Height 920 mm Width 1930 mm Depth 800 mm Test compartment dimensions: Height 740 mm Width 850 mm Depth 570 mm Areas of application: Corrosion tests: Salt spray test: room temp. up to + 50°C Condensation water test: Room temp. up to + 45°C Humidifier +75°C Temperature constancy The temperature deviation over time is ± K. Voltage: 1/N/PE AC 230V ±10% 50Hz Rated power 2.0 kW Rated current 8.5 A Combination: Salt spray test SS: DIN 50021 Condensation water test KFW: DIN 50017 Normal climate (ventilation): DIN 50014 Weight: 180 kg Condition: second-hand / used Scope of delivery: (see picture) (We reserve the right to make changes and errors in the technical data and specifications) We will be happy to answer any further questions you may have on the phone.

Condition: excellent (used), Double side - Independent Machine (or 1st and/or 2nd in a line) Edges (band in rolls) thickness (Min/Max) mm 0,3 / 3 Ndedpshvi E Isfx Aadsd Panels thickness (min/max) mm 12 / 40 Working width (min/max) mm 225 / 2500 Numerical Control NC 21 / HOMATIC Adjustable feeding speed (m/min) 15 - 50 Safety and sound-proof enclosures/cabins Distance (center-axes) of the Disappearing Dogs (mm) 500 SIZING PART (for each side): Spraying unit (Anti-sticking liquid) Anti-chipping Milling Unit 1 x Kw 4,5 Hogging Units KD 11 (2 x Kw 6,6) LEFT SIDE: Jumping Milling Unit (for grooving) SF 20 (Kw 6,6 x 1) 0°-90° RIGHT SIDE: Free space EDGE-BANDING PART (for each side): Glueing Unit (Hot Melt Glue + Quick Melt system) A3 + A34 Edge coils support (No 6 reels) Band Pressure zone "A" (1 + 4 rollers) Snipping (end-cutting) unit HL 04 (2 x kW 0,18) Rough Trimming unit 2 x Kw 0,55 (0°-35°) Multi Function Unit (Profile contour Trimming unit) FK 11 - 2 x Kw 0,4 Profile edge scraping unit PN 20 Glue scraping unit (Pneu) Buffing unit (2 x Kw 0,25)

Condition: reconditioned (used), Double-side Sizing-Milling & Edge Banding - First (1st) machine in a line Edges (band in rolls) thickness (Min/Max) mm 0,3 / 3 Panels thickness (min/max) mm 8 / 45 Working width (min/max) mm 236 / 1300 Numerical Control /Software ICOS Open Adjustable feeding speed (m/min ) 10 / 50 Without Transmission bar (Master & Slave system) Safety and sound-proof enclosures/cabins SIZING PART (for each side): Spraying unit (Anti-sticking liquid) Milling Unit (vertical Joint Trimmers) 08. 0555 max. 3° (2 x 1 kW) Free space EDGE-BANDING PART (for each side): Glueing Unit (Hot Melt Glue + Quick Melt system) 04.1570 Band Pressure zone Edge coils supporting unit (reels N°) 6 Nodpfxjdh Tfgj Aadedd Rough Trimming unit 08. 0555 (2 x 1 kW) max. 3° Fine Trimming unit 08. 055 (2 x 0,66 kW) 30° + 30 m/min Glue scraping unit 08.517 Spraying Unit (for polishing liquid) Buffing unit 08.617-2 (2 x 0,18 kW) Free space

Condition: excellent (used), FLEXIBLE SYSTEM OF SINGLE-SIDE SIZING AND EDGEBANDING FOR BATCH ONE Edges (band in rolls) thickness (Min/Max) mm 0,3 - 3 Panels thickness (min/max) mm 8 - 60 Numerical Control ICOS open Feeding speed (adjustable) m/min 7-35 Top pressure system with rubber belt, Spraying unit (Anti-sticking liquid) In-feed fence, adjustable by N.C. Panels in-feed system A2 / 30 Pre-milling Unit (vertical joint trimmers) by N.C. 75.34 (2 x Kw 6,6) Glueing Unit (P.U.R. Glue + Quick Melt system) 2 - VTG 3-48 + 286.205 Band Pressure zone. Height adjustment of the band by N.C. Edge coils supporting unit (reels N°) 48 Nedpfx Ajifnzdsadjdd Snipping (end-cutting) unit 08.42 / 30 / B (Kw 0,66 x 2) (PNEU 0°-25°) 30m / min Rough Trimming unit 08.0555 (Kw 1 x 2) Fine Trimming unit (Multi-profile, by N.C.) 08.0587 (Kw 0,66 x 2) 4 PROFILES Spraying Unit (for sliding liquid) Multi-Profile Copying unit by N.C (fine and contour trimming) KFA 30 (Kw 0,5 x 1) 30m/min Profile edge scraping unit (Multi-profile, by N.C.) 08.516 (4 PROFILES) Glue scraping unit 08.521 (CN horizontal positioning) Spraying Unit (for polishing liquid) Buffing unit 08.617 (Kw 0,18 x 4) No. 3 Milling grooving units by N.C. 08.190 (Kw 4,5 x 2 + Kw 6,6 x 1)