SINGLE SIDE EDGE BANDER (Left)

IMA Advantage 500 L

Condition: reconditioned (used), Year of construction: 2014, functionality: fully functional, HOLZ-HER Edgebanding Machine ACCURA 1558 performance with BELT BRIDGE and intelligent equipment package for edge thicknesses up to 15 mm. Nlodpfxoyfgrpj Ab Uog Easy program selection and tool adjustment via the 18.5" color touchscreen (16:9). Short heating time for the GlueJet (GJ 301 automatic) adhesive system—around 2 to 3 minutes depending on adhesive type and ambient temperature. Always fresh glue thanks to the GlueJet adhesive application system and glue cartridges. Swapping PUR adhesive and cleaning the system is effortless and takes just a few minutes. Axis adjustment via high-precision, repeatable servomotors. Special configuration for protective film materials, such as high-gloss and super-matt! One of the absolute highlights of this machine is the multifunction package, which excels with businesses processing a wide variety of edges. The DIA tools are multi-stage and can switch between radius and chamfer as needed—from the longitudinal milling unit to corner copying and the profile scraper blade. The extendable workpiece support and the extended infeed area with air cushion table provide support for large workpieces. A guidance system assists in feeding small workpieces into the machine. Edge thickness (roll material): 0.4 – 3 mm (material dependent) Edge thickness (strip material): 0.4 – 15 mm Workpiece thickness: 8 – 60 mm Workpiece width: min. 65 mm Feed speed: 10 – 25 m/min Glue application with GlueJet in EVA and PUR quality, minimal effort required. Processes all standard edge types, including high-gloss & super-matt, as well as solid wood edges up to 15 mm. Motorized adjustment of the infeed fence Narrow part guidance system Prepared for connection to a RETURN system Motorized pressure bridge with top belt drive Multifunctional units for rapid changeover between radius, flush, and chamfer processing Spraying units, vertical & horizontal and much more. Delivery, installation, and commissioning of the machine can be offered directly by us for an additional charge. The machine is currently located at our delivery warehouse in Gratwein, Austria. In the event of discrepancies between the German version and any foreign-language version, the German version shall prevail. Our terms and conditions can be found on our website at holzher.de/en/terms-and-conditions.

Condition: used, mileage: 1,55,000 km, power: 51 kW (69.34 HP), first registration: 12/2009, fuel type: gasoline, next inspection (TÜV): 08/2025, color: red, gearing type: mechanical, emission class: euro4, number of seats: 4, Equipment: ABS, air conditioning, electronic stability program (ESP), immobilizer system, soot filter, Hello! We are pleased to welcome you. We are offering you the vehicle with the following equipment: Please be sure to leave us your telephone number in your message! * Heated seats * Electric windows on both sides * Air conditioning * Valid MOT until 08/2025 * Roof spoiler in vehicle color * Individual interior styling package * Heated front seats * Individual styling package Nljdpstxfn Njfx Ab Uog * Titanium X package 1 * Outside temperature display * On-board computer * Electric brake force distribution * Isofix mounts for child seat * Engine 1.2 liter - 51 kW 8V CAT * Rear seat split / foldable Our services: - Fresh TÜV+ASU - Delivery throughout Germany - Test drive possible at any time - Attractive financing conditions - Vehicle trade-in Opening hours also on Sundays by appointment

Condition: new, Year of construction: 2026, Gannomat Concept 70 Eco Laminate – Body press with rapid traverse Technical data: Laminate body press from our showroom; Working area: width from 150 – 2,500 mm, height from 150 – 1,400 mm; depth 700 mm; - Laminate press beam at the top with 6 elements, laminate press beams on the side with 5 elements - Laminate press beams with proven tolerance compensation for tight body joints - Counterpressure surfaces are 40 mm thick, coated, continuous support plates - The pressing force of the press beams is continuously adjusted electronically via 2 potentiometers and set via a frequency converter, therefore, the torque transmission is absolutely wear-free. - Pressing force for horizontal press beams min. 500 daN (kg) to continuously max. 2200 daN (kg) Nsdpfxjiidm Ns Ab Uelg - Pressing force for vertical press beams min. 300 daN (kg) to continuously max. 2200 daN (kg) - Including option: Rapid traverse speed for quick positioning of the press beams, controlled via automatic workpiece detection with sensors in the press beams, pressing speed 5/10/25 mm/sec. and rapid traverse speed 50 mm/sec, the sensors can be switched off for pressing special parts. - Tapping mode for precise positioning of the two press beams, e.g. for low pressing forces, drawers and bodies at 45 degrees. Simple operation via 6 separate push buttons, freely adjustable preselection of pressing time with automatic opening, loading height 300 mm The machine is in our showroom and can be delivered immediately. Location: in stock at 54634 Bitburg - immediately available -

Condition: used, machine/vehicle number: 007986, Max. panel width: 1000 mm Max. panel length: 2000 mm Length of conveyor: 3500 mm Panel return for edgebander: Right Nlodpfx Aox A Tggeb Ujg

Condition: like new (used), Year of construction: 2019, Vacomat 350 XP TWIN Njdezp Edwepfx Ab Uelg The Vacomat 350 XP TWIN is a high-performance dust extraction unit and a true energy-saving marvel among mobile dust extractors. Two frequency-controlled motors (5.5 kW each) ensure that the suction power is adjusted accordingly, especially under highly variable operating conditions. This ensures that only the energy that is actually needed is consumed. This dust extractor handles air volumes of up to 10,000 m³/h and is ideally suited for extracting dust from large CNC machines or entire machining centers. The innovative and highly intelligent control system automates the extraction process in conjunction with the connected machines. Extraction starts automatically as soon as a connected machining center is switched on. If the power requirement is lower, only one fan is started. As soon as several extraction points are in operation, the second fan is automatically switched on. As standard, the filter sleeves are cleaned automatically during operating breaks, as soon as all connected machining centers are switched off. Our patented filter shaking system then ensures gentle cleaning via a pneumatic/mechanical process using a compressed air connection (inlet pressure 6 bar, air consumption per cleaning cycle approx. 11 l). Optionally, and particularly recommended for very high and extremely fine dust concentrations, such as gypsum dust, an efficient pressure pulse cleaning system is available. The cleaning process via the compressed air tank takes place offline, after the extraction operation (NOTE: height then +100 mm and length +350 mm). Our Vacomats are manufactured using a modular system. As standard, the dust and chip mixture is discharged into four dust-tight chip collection containers (4 x 120 l) with durable plastic liners. A negative pressure channel securely holds the foil bags in the collection container. Viewing windows make it easy to check the fill level. Low energy consumption thanks to a modern, high-efficiency motor (IE3) "Made in Germany" and a flow-optimized internal housing with low air resistance. Heat recovery through a recirculation system: The warm exhaust air is filtered and fed back into the workshop. Low noise level: A double-walled filter sleeve housing absorbs the extraction noise directly inside the Vacomat. In addition, the fan housing is soundproof. Approved for indoor installation in the wood dust area - manufactured according to the new DIN EN 16770 standard. Healthy return air: High-quality, specially developed filter materials made of antistatic polyester needle felt filter out 99.9% of dust and chip waste from the air (dust class M for St 1 dust, according to TRGS 553). Increased safety through fire and explosion protection measures according to DIN EN 16770: pressure pulse tested up to 20,000 Pa, automatically activated powder extinguishing system - no water damage! Operational reliability: A pressure gauge continuously monitors the extraction performance. Error messages are displayed by the signal light. Low follow-up costs due to high-quality components and long service life of the filter medium: For example, an extra-large settling chamber ensures an initial separation of coarse chip waste. This prevents the filter sleeves from being additionally loaded with material. Low maintenance effort thanks to the maintenance unit on the motor console and easy access to the inside of the filter. All specifications according to the manufacturer.

Condition: used, Year of construction: 1988, Distance between centres 1200 mm Speed A) 70 - 380 U/min. turning speeds B) 380 - 2000 U/min weight 2,2 t Nsdjk Sat Djpfx Ab Uolg +++++ Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++

Condition: excellent (used), Year of construction: 2003, machine/vehicle number: 0-241-06-5232, functionality: fully functional, operating hours: 12,608 h, cutting height (max.): 125 mm, cutting width (max.): 2,200 mm, cutting length (max.): 4,300 mm, Panel Saw Holzma HKL11/43/22 Max. cutting width: 4300 mm Max. cutting length: 2200 mm Max. cutting height: 125 mm The saw is in continuous operation, so viewing during operation is possible. Nlodpfxexfvp Ao Ab Uog The machine will be available from 02/03/2026.

Condition: new, Year of construction: 2025, functionality: fully functional, Cutting range: 5300 x 2240/2100 x 80 mm Cutting depth: 80 mm Motor power: 5.5 kW Continuously adjustable scoring unit EPS.X – Electronic positioning system for the X-stop 12" touchscreen display Saw Frame • Manufacture of precision components to 1/100 mm accuracy • Solid, self-supporting, permanently welded, torsion-resistant saw frame • TRK1 full-surface support wall made of birch plywood with integrated small parts support • Auxiliary stop profile with its own measuring tape and 3 auxiliary stops for repeat cuts • Automatic detection of central support • Automatic roller locking during cutting Saw Beam • Stable, durable steel construction of the saw beam • Automatic saw beam locking with interface detection Saw Unit • Play-free, easy-running guides • Robust bearing of the motor carriage ensures high cutting precision • Powerful, high-torque 5.5 kW motor (7.5 HP) • Increased operator comfort thanks to largely automated operation • Laser-assisted display for horizontal cuts • Automatic motor carriage clamping • Automatic plunging and swiveling of the saw motor • Pneumatic clutch for easy switch-over to manual operation • SUPERSILENT sound insulation to reduce saw blade noise • Electromagnetic motor brake • ProLock Easy-Fix tool clamping system Control • 12" touchscreen control panel with optimized user guidance • Multilingual user interface • Tool database for maximum flexibility and repeat accuracy • Fully automatic cutting process • Infinitely variable feed speed from 10–25 m/min • Selectable sawing cycle • Panel end detection • Constant return speed • Operating hours counter • Network connectivity • UPS 24VDC for touch PC (uninterruptible power supply) • Automatic saw beam positioning (ASP) Dimension Setting • Digital measuring system DMS.x (horizontal axis for vertical cuts) • Electronic positioning system EPS.y incl. ABO (vertical axis for horizontal cuts) Njdjyx H Dtjpfx Ab Uelg Design, Ergonomics • Typical STRIEBIG product design • Multiple award-winner (including the Design Prize Switzerland) • Ergonomically optimized for function and user Installation • Wall-mounted or free-standing installation possible

Condition: new, Year of construction: 2026, Make: S&F GmbH Type: MFB-500/5 Belt width: 500 mm Centre distance (A-A): 5,000 mm Conveying capacity: approx. 30 - 40 m³/h (at 0 ° incline) Drive: worm gear motor Motor power: 1.5 kW, 400 V, 50 Hz Belt speed: approx. 1.1 m/s Drive drum: Drum diameter 220 mm Tensioning drum: Drum diameter 220 mm with spindle tensioning station Belt: EP 250/2 2:1 rubber inclined conveyor belt with V-profile (15 mm) Machine weight: approx. 450 kg Machine colour: RAL 6009 Fir green Suitable for the following bulk materials, among others: Wood chips, sawdust and sawdust, biomass, wood pellets, charcoal, waste wood, bark, soil, humus, recycling material, cross-cuts and much more. Nledpfx Ajw Ad Rrsb Ujg Accessories (optional): Feed hopper (filling hopper), inner belt scraper, chassis, tow bar, steel support, electrical installation (16 A plug-in switch) Troughed conveyor belt | troughed belt conveyor | conveyor belt | bulk material conveyor | belt conveyor | inclined conveyor belt

Condition: new, Year of construction: 2023, New machine Year of manufacture: 2023 Single-sided automatic edge banding machine with pre-milling unit, hot-melt adhesive application on straight workpieces (EVA/PUR glue pot with emptying function optional), HF cross-cut saw station, HF milling unit, corner copying unit, chain feed, double roller upper pressure, extendable workpiece support rail, signal lamp for workpiece tracking and integrated length control for contactless operation of processing functions. Suitable for ABS, PVC, melamine, and solid wood veneer edging coils, as well as fixed lengths from 0.4–3.0 / 6.0 mm and workpiece heights from 8–60 mm. Feed speed: 10.0 m/min; 8.0 m/min with corner copying. ● 3 free slots for finishing units ● 10" color touch screen. Machine length: 4030 mm Workpiece thickness: 8–60 mm Min. workpiece width: approx. 75 mm Min. workpiece length: approx. 120 mm (min. approx. 200 mm with corner copying) Edge thickness: 0.4–3.0 mm Pre-milling unit chip removal: 0–2.0 mm, stepless adjustment Total connected load: 7.5 kW – 400 V Feed speed: 10 m/min; 8 m/min Pneumatic connection: 6 bar Net weight: 1050 kg Options: Surcharge for radius scraper unit with air nozzle + extraction Surcharge for surface scraper unit + extraction Nlodpfxew I U Dro Ab Ueg Surcharge for buffing unit EVA/PUR glue pot with emptying function Surcharge for diamond tools, height = 65 mm for pre-milling unit Riepe spray system (anti-adhesive) at the pre-milling unit Riepe spray system (cleaning spray before buffing unit) Pipe system with 90° bend + manual slide valve, installed on machine, D=200 mm Availability: short-term Location: Hochheim