Used Adjustable Chamfer Mills for sale (30,495)

Condition: used, ESD Electrostatic Protected Workbench, Work Table by HANDKE Industrial Technology Single workstation for Electrostatic Discharge (ESD) Table length: 1100 / 1700 mm Table depth: 600 mm Table length folding table: 600 mm Working height: from 830 to 1200 mm - Volume-conductive ESD tabletop: 40 mm - Tabletop with hydraulic lift system - Height adjustment via hydraulic pump operated by hand crank - Sturdy base frame made from aluminium system profile - Rear panel with standard square perforation - 1 drawer unit, W x D x H = 675 x 210 x 80 mm - 1 under-table cabinet, W x D x H = 160 x 580 x 560 mm Ibjdpfx Ajitv Nveabjc Overall dimensions (L x W x H): 1200 x 660 x 1560 mm Weight: 90 kg Very good condition, as new 14 units available Price per unit Inquire about tiered pricing for bulk orders.

Condition: used, machine/vehicle number: 12599, Rotor diameter: 600 mm Rotor width: 1450 mm 12-knife rotor 3 rows stator knives Isdpfx Aajk N Iy Njbsbc Inlet cross section approx. 780 x 1490 mm Drive motor: 132 kW

Condition: used, Double-column hydraulic press SCHÖN Type SH 25 Machine no.: 4453 Year of manufacture: 1999 Pressing force: 25 tons Column width: 500 mm Lateral column clearance: 120 mm Table surface: 440 x 320 mm Table opening: Ø 175 mm Ram surface: 360 x 220 mm Clamping pin bore: Ø 40 mm Max. ram stroke: 100 mm Max. installation height: 270 mm Table height above floor: 900 mm Ibjdew A Amrepfx Aaboc Motor power: 7.5 kW Connection voltage: 380 V, 50 Hz Equipment: - Safety light curtain SICK, type FGS 300-11 - Two-hand operation - Stroke counter - Rapid and working stroke - Stroke limitation dependent on pressure or position - Mechanically adjustable fixed stop - Pressing force regulation - Adjustable pressing time 1–10 s (pressure holding time) - Adjustable return stroke speed - Blow-off device electrically pre-wired, without air valve - Manual hydraulic tool safety, adjustable via handwheel Dimensions (L x W x H): 1300 x 1200 x 2200 mm Weight: approx. 1200 kg Good condition

Condition: used, machine/vehicle number: 12677, Rotor diameter: 400 mm Rotor width: 600 mm 3-knife rotor 2 rows stator knives Inlet cross section approx. 600 x 660 mm Ibodpfx Ask Tuxdoabec Drive motor: 30 kW

Condition: used, machine/vehicle number: 12464, Rotor diameter: 420 mm Rotor width: 650 mm 5-knife rotor Ibedpekyy U Usfx Aabsc 2 rows stator knives Inlet cross section approx. 420 x 650 mm Drive motor: 37 kW

Condition: new, machine/vehicle number: Baureihe GSL 300 / Neumaschine, The cutting mills in the GSL series 300/400 to 300/800 are primarily intended for the shredding of production-related scrap material in the injection molding and blow molding sectors. In addition to the key advantages of the GSL series, the slow-running cutting mills GSL 300/400, GSL 300/600 and GSL 300/800 are particularly suitable for large-area parts, such as car door panels, bumpers or hollow bodies. Ibsdpfx Ajghgbhjaboc The "V-arrangement" of the rotor blades keeps the pre-shredded material in the center of the rotor. This significantly reduces wear on the grinding chamber walls when grinding glass fiber reinforced plastics. Material sticking to the side walls is avoided. The staggered arrangement of the rotor disks means that only individual blades are used at any one time, so a higher cutting force is available in each case.

Condition: new, machine/vehicle number: Baureihe PM / Neumaschine, The impact disc mills (fine mills) of the PM series are high-speed centrifugal mills for fine grinding of almost all thermoplastics. Typical tasks are the fine grinding of regrind or primary material from profile, pipe or sheet extrusion. In addition, these mills can be used in the food, chemical and pharmaceutical industries. Ijdpfjghgb Njx Aabsbc The material is centrally fed by the stationary grinding disc with dosing element. Fine grinding takes place between the rotating and stationary grinding discs. The material is discharged by means of pneumatic suction.

Condition: used, machine/vehicle number: 8802, Inlet cross section approx. 650x1000 mm 3-knife rotor (staggered knives) Ibjdpfx Aeghgiajaboc 2 stator knife rows Rotor diameter 500 mm Rotor width 1000 mm

Condition: used, machine/vehicle number: 11552, Rotor diameter: 2 x 150 mm (duplex rotor) Ibjdpfsghgn Aox Aaboc Rotor width: 200 mm 2 x 12 rotor blades 2 + 1 stator blade Inlet cross-section approx. 350 x 200 mm Drive motor 15 kW The counter-rotating cutting rotors of the SM Duplex ensure good feeding performance for bulky, thin-walled parts and lightweight hollow bodies. The granulator can be used as a central granulator or as a stand-alone granulator on an injection molding or blow molding machine. This makes it suitable for shredding sprues or rejects that arise, among other things, during machine start-up.

Condition: used, machine/vehicle number: 11667, Rotor diameter: 450 mm Rotor width: 600 mm Ibedpfxsghgrbe Aabjc 3 blade rotors 2 rows of stator blades Inlet cross-section approx. 450 x 600 mm Drive motor: 30 kW

Condition: used, machine/vehicle number: 12258, Rotor diameter: 350 mm Rotor width: 450 mm 3-blade rotor 2 rows of stator blades Inlet cross-section approx. 350 x 450 mm Ibsdpfjh Ezf Rsx Aaboc Drive motor: 18.5 kW

Condition: used, machine/vehicle number: 12917, Rotor diameter: 350 mm Rotor width: 600 mm Rotor blades: 3 Stator blades: 2 Inlet cross-section approx. 350 x 600 mm Drive motor: 18.5 kW Ibodpfjwbwq Ajx Aabjc

Condition: used, machine/vehicle number: 12948, Rotor diameter: 300 mm Ibedpfx Aaowbwryjbec Rotor width: 600 mm Rotor blades: 3 Stator knife: 4 Inlet cross-section approx. 300 x 600 mm Drive motor: 30 kW

Condition: used, machine/vehicle number: 13064, Rotor diameter: 450 mm Iodpfjwbwu Iex Aabjbc Rotor width: 600 mm Rotor blade rows: 5 Stator blade rows: 2 Inlet cross-section approx. 600x600 mm Drive motor: 55 kW

Condition: used, machine/vehicle number: 13072, Rotor diameter: 600 mm Rotor width: 650 mm Iodpfx Aaewbwu Usbebc Rotor blade rows: 8 Stator blade rows: 3 Inlet cross-section approx. 650x600 mm Drive motor: 75 kW

Condition: used, machine/vehicle number: 11795, Rotor diameter: 250 mm Rotor width: Isdpewbwvxefx Aabjbc Rotor blade: 3 Stator knife: 4 Inlet cross-section approx. 250 x140 Drive motor: 5.5 kW

Condition: used, machine/vehicle number: 13222, Rotor diameter: 260 mm Rotor width: 820 mm Ijdpfx Aewbww Aoabjbc Rotor blades: 5 rows of 2 blades each Stator blades: 2 rows of 2 blades each Inlet cross-section approx. 820 x 260 mm Drive motor: 18.5 kW

Condition: used, machine/vehicle number: 13223, Rotor diameter: 450 mm Iedpfxjwbww Ne Aabebc Rotor width: 600 mm Rotor blades: 3 Stator blades: 2 Inlet cross-section approx. 600 x 450 mm Drive motor: 30 kW

Condition: new, Rotor diameter: 300 mm Rotor width: 600 mm Rotor blades: 3 x 2 Stator blades: 2 Isdpfx Aajwfig Dobsbc Inlet cross-section approx. 300 x 600 mm Drive motor: 18.5 kW

Condition: used, machine/vehicle number: 11862, Rotor diameter: 320 mm Rotor width: 440 mm 2 x 3-blade rotors / 6 rotor blades Rotor blades arranged offset (paddle rotor) Ibodsg Agpmspfx Aabjc 2 rows of stator blades Inlet cross-section approx. 440 x 300 mm Drive motor 7.5 kW Weight approx. 800 kg

Condition: used, machine/vehicle number: 11924, Rotor diameter: 500 mm Rotor width: 800 mm 5-blade rotor 2 rows of stator blades Inlet cross-section approx. 800 x 450 mm Drive motor: 55 kW Isdsg H Nf Ropfx Aabjbc

Condition: used, machine/vehicle number: 12727, Rotor diameter: 300 mm Rotor width: 900 mm 3-knife rotor 2 rows stator knives Inlet cross section approx. 300 x 900 mm Drive motor: 30 kW Ijdpfxel A Azvo Aabobc incl. flywheel

Condition: new, machine/vehicle number: Baureihe GSE / Neumaschine, Economical cutting mills: This GSE series is ideal for all injection molding and blow molding companies. It is basically suitable for all thin-walled plastic waste. These cutting mills are characterized not only by their low purchase price, but also by their robust, split steel/welded housing, the easy cleaning option and easy blade and screen changes. Thanks to the tangential housing geometry in conjunction with V-cut rotors (except GSE 300/300), even bulky and large-volume feed parts are accepted and shredded by the rotor. Grinding material transport: The cutting mills are equipped with an extraction system and bagging station as standard. Ibsdpoghgbtjfx Aabjc A grinding material collection container is also available as an option, which, like the extraction tray, is made of stainless material.

Condition: used, machine/vehicle number: 8799, Inlet: 400 x 800 mm Rotor diameter: 400 mm Width: 800 mm Rotor blades: 5 Stator blades: 2 Drive: 45 kW Ibsdpfxjghgb Ej Aabjc Sprue mill, granulator, plastic mill, cutting mill

Condition: new, machine/vehicle number: Baureihe GSP, When crushing long pipes and profiles, conventional granulators are faced with considerable problems. In most cases, pits or platforms are needed to allow feeding of the long and bulky parts. This is why ZERMA has developed the GSP series. Thanks to the almost horizontal feed hopper, long parts can be conveniently fed and the risk of blockage is eliminated as the machine doses automatically. In the event of overfilling of the grinding chamber, no further material is accepted until work can continue without motor overload. Ibedpfsghgftox Aabjc ZERMA also offers a wide range of options such as exhaust systems, conveyor belts, metal detectors, fines separators, etc.