Used Agitator for sale (465)

Condition: excellent (used), Equipment: type plate available, 18 x sparkling wine pressure tank/storage tank made of V2A, 8 bar, with lateral agitator mixer - second-hand - used Manufacturer: Rieger Volume approx. 52,100 liters Diameter approx. 3,250 mm cyl. height approx. 5,500 mm Bwsdpetvg Uyefx Abtot Total height approx. 8,000 mm Cylinder wall thickness: 11 mm Operating pressure: 8 bar Working temperature: 20 C° Internal surface: 2B=IIIC ground Surface outside: marbled Top shelf: dished bottom 3 crane eyes CIP line DN 50 drawn downwards with flange connection with pressure line DN 25 5 saddle feet Tank cylinder: Manhole oval 350 x 450 mm 1/2" sample tap with flange connection Clear drain DN 65 with angle seat valve Lateral agitator mixer, type: propeller at 315° from the manhole Complete champagne pressure fitting with safety valve, pressure gauge, vacuum valve and DN 25 angle seat valve Underbody: dished bottom Residual drain pipe pulled forward in the middle, flush with the tank DN 65 with angle seat valve 6 sturdy with height-adjustable spherical feet and sturdy washers 9 basic tanks and 9 saddle tanks are available otherwise as per photos

Condition: used, For sale is a stirrer motor from YTRON. It is the model Y11.00FC-4/II10-IV. Motor data: RPM: 1470 Bwsdpsga Dx Tefx Abtst V: 480 kW: 11 Connection: DN200 Further data can be found on the nameplate.

Condition: excellent (used), Year of construction: 2010, Sterile tank with agitator, temperature-controlled, upright Technical data / dimensions Available quantity: 1 Bwedpfx Abotyz Izjtot Volume: approx. 6,000 liters Container type: Sterile tank Condition: used Suitable for food: yes Design: upright Diameter inside: approx. 1,700 mm External diameter: approx. 1,854 mm Cylindrical height: approx. 2,264 mm Total height: approx. 5,390 mm Weight: approx. 2,030 kg Specific weight of the medium: 1.0 to/m³ Operating pressure: negative pressure/vacuum Operating pressure: 3.5 bar Test pressure: 5.4 bar Wall thickness bottom: approx. 5.2 mm Wall thickness top: approx. 8.4 mm Wall thickness jacket / cylinder: approx. 5.2 mm Ground clearance: approx. 800 mm Operating temperature: 150 degrees Celsius Type plate available Manufacturer: GEA serial no.: 2376 Year of construction: 2010 Material / condition Material inner jacket: V2A (1.4541) Material double jacket: V2A (1.4541) Feet material: V2A (1.4541) Outer surface: bright rolled 2B Internal surface: Ground Ra

Condition: excellent (used), functionality: fully functional, usable tank capacity: 60,000 l, total height: 11,500 mm, inner diameter: 2,900 mm, outer diameter: 3,000 mm, wall material: stainless steel, Agitator Tank made of Stainless Steel (V2A), Insulated (Milk Tank) Technical Data / Dimensions Available quantity: 5 Volume: approx. 60,000 liters Tank type: Agitator tank Condition: used Food-grade: yes Design: vertical Internal diameter: approx. 2,900 mm External diameter: approx. 3,000 mm Cylindrical height: approx. 8,100 mm Total height: approx. 11,500 mm Specific gravity of medium: 1.0 t/m³ Operating pressure: non-pressurized Operating temperature: 40°C Notes: former milk storage tank Material / Construction Internal shell material: V2A (1.4301) Foot material: stainless steel Internal weld seams: ground smooth Insulation Insulation thickness: approx. 50 mm Insulation material: PU foam Insulation shell material: stainless steel Insulation shell: diffusion-tight welded Notes: The insulation shell of the tank has some minor dents which do not affect its functionality. Equipment Support design: foot ring / support skirt Mounting: fixed Top head: conical Cone angle: approx. 15% Bottom head: conical Top head features: 1 x vent hood with mesh 1 x CIP nozzle 1 x threaded socket for level limit measurement 2 x lifting lugs Shell features: 1 x oval manway, swing-type (approx. 340 x 440 mm) 1 x oval manway (approx. 340 x 440 mm, in support skirt) 1 x agitator flange with agitator 1 x threaded nozzle for temperature measurement Bottom head features: 1 x threaded nozzle for temperature measurement 1 x nozzle for level limit measurement 1 x residue drain Notes: The connection configurations differ slightly between the 5 tanks Agitator Bwedsxw Rrpopfx Abtst Agitator included Type: propeller Classification: high-speed Quantity: 1 Mounting position: lateral Speed: 940 rpm Agitator power: 2.2 kW Impeller length: approx. 600 mm Manufacturer: Stelzer Notes: Some agitators supplied with stainless steel cover

Condition: good (used), functionality: fully functional, Year of construction: 2007, operating hours: 1,153 h, DYNO-MILL KD 6 Agitator Bead Mill (2007) For sale is a DYNO-MILL KD 6 horizontal agitator bead mill, manufactured by Willy A. Bachofen AG (WAB). This machine is a premium Swiss-made unit designed for the continuous dispersion and wet-grinding of pumpable products, ranging from low to high viscosity. This unit was manufactured in 2007 and decommissioned in fully functional, running condition with no known faults. It is distinguished by its exceptionally low usage history, having logged only 1’153 operating hours. It comes equipped with a high-wear-resistant Silicon Carbide (SiSiC) inner cylinder and hardened stainless steel discs. It is sold as a complete bundle, including a peristaltic pump, a tool kit, the original electric cabinet and yttrium-stabilized zirconium balls (used). Highlights • Low Usage: Only 1'153 operating hours—internal mechanics are in excellent condition. • High-End configuration: Fitted with a ceramic Silicon Carbide (SiSiC) inner cylinder (6mm wall thickness) and hardened stainless steel discs for durability and contamination control. Sintered Silicon Carbide (SSiC) prevents product overheating significantly better than Zirconium or Steel liners. • Ready to Run: Sold as a complete package including the Electric Cabinet and a Peristaltic Product Pump. • Features the industry-standard WAB dynamic gap separator and pressure-balanced mechanical seal. • Voltage: Fitted with a modern Danfoss VLT frequency converter featuring wide-range input (380-480V, 50/60Hz), making the machine immediately compatible with both European (400V) and US (480V) power grids without modification Technical Specifications • Manufacturer: Willy A. Bachofen AG (WAB), Switzerland • Model: KD 6 • Grinding Chamber Volume: 6.0 Liters (Net volume ~5.7 Liters) • Throughput: approx. 50 – 200 kg/h (dependent on product/viscosity) • Main Drive: 11 kW Motor (440V / 60Hz rated) • Separation System: Dynamic gap separator (Tungsten Carbide rotor/stator) with adjustable gap width (0.15–1.0 mm) • Shaft Seal: Double mechanical seal (DGD) with integrated pressure rinsing circuit • Cooling: Forced water cooling jacket for the grinding cylinder • Weight: 695 kg 
 Scope of Delivery • Mill: DYNO-MILL KD 6 base unit • Grinding System: Silicon Carbide (SiSiC) Inner Cylinder & Hardened Stainless Steel Discs • Feed Pump: Peristaltic Pump included • Controls: Original Electric Cabinet included • Grinding Media: Ceramic Beads, Zirconia Partially Stabilized with Yttria, four sizes, each approx. 25Kg (0.4 - 0.6 mm / 0.8 - 1.0 mm / 1.2 - 1.4 mm / 1.6 - 1.8mm) • Documentation: Operating instructions and wiring diagrams Condition • Mechanical: Excellent, running condition with no known faults at the time of decommissioning. • Cosmetic: The machine is clean but shows minor cosmetic wear (see pictures for visual details) • Last application: Food Typical Applications • Ideal for fine particle size reduction in industries such as: • Paints, Inks, and Coatings • Agrochemicals and Chemicals • Life Sciences and Microbiology • Food and cosmetics Bsdpfx Absx Tdyzstswt We ship worldwide. If you are interested or have any questions, please get in touch! Can be inspected in Liestal, Switzerland.

Condition: new, Year of construction: 2024, machine/vehicle number: 30065973-10, Unused 100-liter Ekato Twin Motion Vacuum Mixer, model UniMix, type SRC 100, with 316L stainless steel product contact surfaces. It has a 100-liter maximum working capacity and a 5-liter minimum working capacity, rated for -1/+2 bar (29 psi and full vacuum) at 133°C, and jacketed for -1/+4 bar (58 psi and full vacuum) at 151°C. Features include a top-mounted Ekato Paravisc axial Z-type mixer with bottom and sidewall scrapers, driven by a 3 kW motor. It also has a bottom-mounted Ekato S-Jet 500 high-performance rotor/stator homogenizer powered by a kW motor, 480 volts, and a control panel with PLC and VFD controllers, as well as an operator HMI. The vessel is ASME-rated, with Ekato project# 30065973-10, built in 2024. The system is unused, still on its original shipping skids from Ekato, with FAT performed. Bwedeyba Szepfx Abtst

Condition: excellent (used), Year of construction: 1997, Equipment: type plate available, GUTH ENGINEERING Mixing Tank 300 L Pressure-resistant magnetic stirrer with heating jacket Tank capacity: 300 litres Jacket capacity: 33 litres Usable volume: approx. 50-250 litres Bjdpfxow U Sw Ae Abtewt Product-contact parts made of stainless steel Operating overpressure: inside: -1 / +3 bar, jacket: -1 / 5 bar Year of construction: 1997 Space requirement: 120 x 90 x 210 cm

Condition: new, functionality: fully functional, power: 11 kW (14.96 HP), Year of construction: 2025, A spiral-type sand washer machine, also known as a spiral sand washing machine or screw sand washer, is a piece of equipment designed for washing, classifying, and dewatering sand and other granular materials. This type of sand washer typically features a spiral or screw-shaped structure for the purpose of lifting, conveying, and washing materials. Here are key features and aspects of a spiral-type sand washer machine: 1. Spiral Structure: The core component of the machine is a spiral or screw-shaped structure, often enclosed within a tub or trough. This spiral impeller is responsible for lifting, conveying, and washing the sand as it rotates. Bjdoq Nf S Rjpfx Abtowt 2. Tub or Trough Design: The spiral structure is usually housed within a tub or trough that holds the water and sand mixture. This design allows for efficient washing and separation of impurities from the sand. 3. Multiple Blades: The spiral impeller typically has multiple blades or flights that provide mechanical agitation to the sand, ensuring thorough cleaning. 4. Water Injection: Water is injected into the tub or trough to aid in the washing process. The combination of water and the rotating spiral helps to remove impurities from the sand. 5. Adjustable Weirs: Some spiral-type sand washers have adjustable weirs or gates that control the flow of water and the retention time of the sand in the machine, allowing for customization of the washing process. 6. Classification and Dewatering: Spiral sand washers often include features for classifying and dewatering the sand. This may involve the use of a separate compartment or mechanism for fine sand recovery and water drainage. 7. Variable Speed: The rotational speed of the spiral can often be adjusted to optimize the washing process for different types of materials and particle sizes. 8. Capacity: The capacity of a spiral-type sand washer is influenced by factors such as the size of the machine, the pitch of the spiral, and the efficiency of the washing process. Different models are available to suit various production requirements. 9. Materials Handling: Spiral sand washers are commonly used in applications such as aggregate processing, mining, concrete production, and other industries where the removal of impurities from sand is essential. 10. Ease of Maintenance: Many spiral-type sand washers are designed for easy maintenance, with accessible components and inspection points. Spiral-type sand washer machines are efficient tools for cleaning and processing sand, ensuring that the final product meets quality standards for use in construction, concrete production, and other applications. The specific features and capabilities of these machines can vary between different models and manufacturers.

Condition: new, Year of construction: 2026, power: 14 kW (19.03 HP), temperature: 90 °C, total length: 1,500 mm, total height: 2,450 mm, overall weight: 790 kg, actuation type: electric, The BDX-F2000 Drying Hopper Mixer is a high-capacity industrial unit designed for simultaneous drying and mixing of plastic granules before processing. By combining efficient hot-air drying with continuous material agitation, the system ensures uniform moisture removal and consistent material quality throughout the entire batch. Technical Specifications • Model: BDX-F2000 • Hopper capacity: 1800 L • Heating power: 18 kW • Mixing screw motor: 3 kW • Blower power: 0.55 kW • Throughput: 500–1000 kg/h (depending on material) • Dimensions: 2450 × 1500 mm • Weight: 790 kg • Material of construction: AISI stainless steel Model: BDX-F1000 • Hopper capacity: 900 L • Heating power: 14 kW • Mixing screw motor: 3 kW • Blower power: 0.55 kW • Throughput: 300–500 kg/h (depending on material) • Dimensions: 2300 × 1100 mm • Weight: 690 kg • Material of construction: AISI stainless steel Efficient Drying and Mixing The BDX-series combines two essential processes into one machine: • Hot-air drying for efficient moisture removal • Continuous screw mixing for uniform temperature distribution The integrated mixing system continuously circulates the material inside the hopper, preventing localized overheating and ensuring that every granule receives the same drying conditions. This results in faster, more consistent drying and improved processing stability. The hopper is manufactured from high-quality stainless steel. Bjdpfezvxc Hex Abtjwt Applications The BDX-series is suitable for drying and mixing: • PE (LDPE & HDPE) • PP • PVC • PET • ABS • PA (Nylon) • PC • Engineering plastics • Virgin material • Recycled plastic granules • Masterbatch blends It is ideal for extrusion, injection molding, blow molding, compounding, and recycling operations.

Year of construction: 2026, condition: new, The 1000L horizontal ribbon mixer is equipped with a special ribbon agitator located in the center of the tank along its entire length. The entire machine is made of 304SS stainless steel. - Capacity: 1000L - Motor: 5.5kW, 3-phase, 50Hz Bjdszux Akepfx Abtjwt - Machine weight: 480kg - Machine dimensions: (L 2820 x W 980 x H 1970mm) - Mixers available from 400L to 3500L The mixer's interior and ribbon itself are highly polished, significantly simplifying and accelerating mixing and facilitating cleaning after use. These mixers are used for mixing bulk materials. They are primarily used in the chemical, food, pharmaceutical, agricultural, and construction industries.

Year of construction: 2026, condition: new, The 600L horizontal ribbon mixer is equipped with a special ribbon agitator located in the center of the tank along its entire length. The entire machine is made of 304SS stainless steel. Bodpfx Aezuxw Ijbtjwt - Capacity: 600L - Motor: 3kW, 3-phase, 50Hz - Machine weight: 360kg - Machine dimensions: (L 2050 x W 780 x H 1430mm) - Mixers available from 400L to 3500L The mixer's interior and ribbon itself are highly polished, significantly simplifying and accelerating mixing and facilitating cleaning after use. These mixers are used for mixing bulk materials. They are primarily used in the chemical, food, pharmaceutical, agricultural, and construction industries.

Year of construction: 2026, condition: new, The 3500L horizontal ribbon mixer is equipped with a special ribbon agitator located in the center of the tank along its entire length. The entire machine is made of 304SS stainless steel. - Capacity: 3500L - Motor: 15kW, 3-phase, 50Hz - Machine weight: 1300kg Bodpfx Abszuxv Rotowt - Machine dimensions: (L: 3350 x W: 1410 x H: 2350mm) - Mixers available from 400L to 3500L The mixer's interior and ribbon itself are highly polished, significantly simplifying and accelerating mixing and facilitating cleaning after use. These mixers are used for mixing bulk materials. They are primarily used in the chemical, food, pharmaceutical, agricultural, and construction industries.

Condition: used, Year of construction: 2023, Overview This Braumanufaktur Werk II Fillmaster R18 is a compact isobaric rinsing, filling and crown-capping monoblock for glass bottles, built in 2023 by Braumanufaktur Werk II (Großalmerode, Germany). It is sold as a complete craft-scale bottling set for carbonated beverages together with a 750 L fermentation and carbonation tank (SM Inox, 2021) and a 330 L pressure loading tank (SM Inox, 2023). The monoblock combines 6 rinsing stations, 6 isobaric filling valves and 6 crown-capping heads in a single compact unit. CO₂ pre-saturation of the bottles before filling reduces oxygen pickup and product oxidation. Mechanical movements are driven by a pneumatic system (6 - 8 bar); filling parameters, production data and bottle counters are managed via the Siemens SIMATIC HMI touch panel. The line is still installed and under power, and basic functionality can be demonstrated on site. Technical data - Manufacturer: Braumanufaktur Werk II GmbH (Großalmerode, Germany) - Model: Fillmaster R18 - Year of manufacture: 2023 Bedpeziuazefx Abtjwt - Machine type: isobaric rinser - filler - crown capper monoblock, glass bottles - Rinsing stations: 6 / filling valves: 6 / capping heads: 6 - Capacity: approx. 500 - 650 bph (semi-automatic, operator-dependent) - Filling system: isobaric, with CO₂ cylinder connection for bottle pre-saturation - Bottle formats: currently set up for 0.375 L glass; adaptable to other crown-cap formats - Crown caps: 26 or 29 mm, all sizes configurable - Control: Siemens SIMATIC HMI touch panel (filling parameters, production data, bottle counter) - Compressed air: 6 - 8 bar - Power: 230 V, 5 A - Dimensions: approx. 870 x 930 x H 1,910 mm Equipment - SM Inox FBTB 750 L PED fermentation and carbonation tank (2021): domed bottom, pressure lid, double insulated jacket with glycol circuit fed by an external heat pump, dedicated control panel for temperature, agitator and CO₂ injection (automatic / manual), carbonation stone fed via solenoid valve; PED Cat. III, approx. Ø 955 mm - SM Inox FCTC 330 L loading tank (2023): pressure lid with CO₂ inlet for pump-free liquid transfer between tanks, approx. Ø 640 mm - Mobile transfer / washing pump on stainless trolley - OEM technical documentation (operating manual, PLC instructions, quick guide) and declarations of conformity Condition Used - very good condition with light use: the PLC production counter reads approx. 58,600 bottles / 12,000 litres in total. Still installed and under power; the sale takes place because the owner has discontinued production. Availability Immediately. Location: Italy. Preparation, dismantling and truck loading by the seller (EXW loaded). The machine can be visited and demonstrated on request.

Condition: used, Year of construction: 2015, Overview  This compact brewing, fermentation and packaging setup was manufactured between 2015 and 2022 by various European manufacturers The installation is designed for beer production in bottles and cans and consists of an isobaric filler, can seamer, small brewhouse, fermentation tanks, refrigeration unit, labeller and steel kegs. The equipment is already dismantled and stored und immediiately available. Bwodpfx Aoy Sccxobtet Technical data - Application: Beer (bottles & cans) - Filling type: Isobaric Filling & Seaming - Bottle formats: 33 cl, 50 cl, 75 cl - Bottle output: 350–400 bph (at −1°C to +1°C, 33 cl) - Can formats: 33 cl, 44 cl, 50 cl - Can output: 350–400 cph (at −1°C to +1°C, 33 cl) Brewhouse - Capacity: 650 L - Heating: Propane gas - Electrical: Single-phase Fermentation & Cooling - Total fermentation capacity: 9,800 L - Stabilization capacity: 2,940 L - Dimensions (refrigeration unit): approx. 1,100 × 930 × 840 mm Scope of Delivery  - Isobaric Bottle & Can Filler | Inox CG | — | — | 350–400 bph/cph - Can Seamer | — | — | 2022 | Brand new, never used - Brewhouse | — | — | 2015 | 650 L, propane gas, agitator - Refrigeration Unit | W3/4 | — | 2020 | Multi-unit control, 4 zones - Isobaric Fermenter | CEAO Inox | — | 2018 | 650 L, cooling jacket (Unit 1) - Isobaric Fermenter | CEAO Inox | — | 2018 | 650 L, airlock (Unit 2) - Isobaric Fermenter | Construções em Aço Inox | — | 2022 | 650 L, dry-hopping port - Isobaric Fermenter | Construções em Aço Inox | — | 2022 | 320 L, dry-hopping port - Atmospheric Fermenter | — | — | 2015 | 650 L, non-insulated - Semi-Automatic Labeller | — | — | 2015 | Circular reel labels - Stainless Steel Kegs | — | — | — | 50 pcs, 30–50 L

Condition: used, Year of construction: 2012, Overview  Bwsdpfx Absyb S Egjtot This 20 hL brewhouse was manufactured in 2012 by Schwarzenbeker. It is a 2-vessel system (Mash/Boil + Lauter/Whirlpool) with a net capacity of 18–19 hL and a maximum mash load of 600 kg. The brewhouse is steam-powered with a double steam jacket and PLC-based automation, offering recipe management and precise process control. It is in generally good condition, though a minor review is recommended. The package also includes a biomass steam generator (Teivy, 2012), a malt mill (Robix, 2012), and a plate filter (Cespedes, 2013). Technical data  - Capacity: 20 hL gross / 18–19 hL net - Configuration: 2-vessel system – Mash/Boil + Lauter/Whirlpool - Max. mash load: 600 kg - Average efficiency: 83% - Average lautering time: 2 hours - Heating system: Double steam jacket (lateral + bottom, independent) - Max. pressure: 3 bar - Automation: Touch-screen PLC, VFD for pump/agitator/cutter, temperature control, programmable mash recipes - Monitoring: PT100 temperature probes in Mash/Boil and heat exchanger outlet - CIP: Spray balls in Mash and Lauter vessels - Safety: Pressure relief valve in Whirlpool - Other features: Auger feed connection, operation manuals included Scope of Delivery  - Brewhouse | Schwarzenbeker | 20 hL Brewhouse | 2012 | 2-vessel system, steam-heated, PLC automation - Steam Generator | Teivy | Biomass Steam Generator | 2012 | Pellet-fired, fully functional - Malt Mill | Robix | Roppi-1100 | 2012 | Incl. metal detector magnet - Plate Filter | Cespedes | – | 2013 | 50–98 plates, adaptors included, no pump  

Condition: used, Year of construction: 2016, Overview  This complete 1,500 L brewhouse system was manufactured by Spanish company Inox GC. It includes a three-vessel hot side, a 2,000 L mash/whirlpool tun, a 2,500 L lauter tun, and a 1,800 L hot water tank. The brewhouse comes with pumps, heat exchanger, CIP features, and a new AEM automatic gas burner for heating. The equipment is in good condition. Technical data - Brewhouse System – Inox GC (1,500 L) - Capacity per batch: 1,500 L - Vessels: HLT, mash/lauter tun, kettle/whirlpool - Material: AISI 304 stainless steel - Heating: Compatible with automatic gas burner - Includes: Temperature control panel, integrated pumps - Isothermal Mash & Whirlpool Tun (2,000 L) - Capacity: 2,000 L - Insulation: 50 mm rock wool - Features: Hinged lids, agitator with VFD, CIP system, PT100 probe - Isothermal Lauter Tun (2,500 L) - Capacity: 2,500 L - Features: 5° sloped bottom, 500 mm manway, German V-screen, automatic rake, CIP system - Insulated Hot Water Tank (1,800 L) - Capacity: 1,800 L - Heating: 9 kW electric element - Features: Rock wool insulation, 50 mm inlet/outlet, CIP system Bodpfx Asyb S D Nobtewt - Process Equipment - Wort pumps (helical & transfer) - Tubular heat exchanger (removable) - Hop filter - Automation panel with VFDs - Automatic Gas Burner – AEM GR8 PHP (2016) - Type: Circular gas burner, automatic ignition

Condition: used, Year of construction: 2018, Overview  The offered filling line for pouch bags was designed by a Swiss company and also delivered by them in 2018. The main manufacturer is Linapack. The line was only used for seasonal production only (2 months a year), therefore the working hours are very low. As the sales volumes are not further increasing, the seller decided to sell the line and stop the production. The line is still assembled and can be shown. It is possible to handle different formats of pouch bags and to do hot filling up to 85°C. The current owner used it for Cocktails but it can also be used for various other non carbonated drinks. Tech. Details - Capacity: - 50 bags/ hour, depending on the volume - 750 -900 l/h - Bag dimensions - Width: 80 - 180mm - Height: 100 - 300mm - Filling temperature: 71 - 85 °C - Siemens PLC Line consists of  - 1,000 l buffer tank - agitator - Flow meter - Level detection - Cleaning spray ball - Integrated into pasteurizer control system - Flash pasteurizer Kreuzmayr PAS-900 - Capacity: 750 - 1,000 l/h - Heated with steam - Fully automatic Bwjdpsvptt Rsfx Abtet - Automatic cleaning with - Hot water - steam - acid - caustic - With tubular heat exchanger - Automatic filler Linapack LFS-1000 Duplex - with Siemens PLC - Seven Station system - motorized magazine with pick and place system to supply pouches - Opening of the pouches with vacuum gripper - Filling unit with flow meter and temperature sensor, automated rejection, if temperature is too low - Sealing of pouches - Sealing of pouches - Cooling of the seal - Pouch discharge - Check weigher - Cooler and dryer for pouches - Cooling in water bath - With UV lamps for desinfication - Drying by blower, five nozzles - Conveyors and collection table

Condition: used, Year of construction: 2017, Overview The brewhouse was manufactured in 2017 by the Czech company HANSTEEL s.r.o.. With it, 5 hl can be produced. Technical details Two-chamber brewhouse with electric heating system. Nominal volume: 500l Total volume: 550l Brewhouse is mounted on separate frame with stainless steel stairs and platform Incl. cooler from Alfa-Laval: cooling of 500l in 1h from 99°C to 12°C Butterfly valves on the chimneys Agitators in both vessels with frequency converter to change the speed Strainer bucket with level sensor for automatic water refilling control of the brewhouse via a touch screen display accessible from the working platform the app needed to control the brewhouse can be installed on a portable device (e.g. tablet) and the operation of the brewhouse can be controlled remotely There is also a possibility to offer for sale open fermenting vats with a nominal volume of 1000 l (total volume 1200 l). Bwsdpfouzpiijx Abtst

Condition: used, Year of construction: 2013, Overview The brewhouse, including fermentation and storage tanks and a KEG washer, was built in 2013 by the Austrian manufacturer Flecks. The whole equipment is in a very good condition and can be visited. Equipment Mash and brew kettle incl. whirlpool function, agitator, stainless: 1.000 L net Lauter tun, stainless: 1000 L net Calandria system (outdoor cooker), electrical heating, stainless. Integration of existing gas, heating + electrical: 72 kW Vapour-condensation system Whirlpool- system Mash and wort pump: 2,2 kW Hot water tank with electrical heating, stainless: 1000 L, 9 kW Wortcooler GEA 2-stages pT 100, electron. Thermometers Incl. all pipes, fittings, valves in stainless. Full automation upgrade: electrical switch board for full automatic process control switches, fuses: 100 kW Main connection 400 V Emergency switch PC-databus and modem Visualisations and automation software "BRAU-MANAGER" 2x cooling units 2x cooling water pumps 1x 2,000L fermentation tank: 2 outlets, cooling jacket, insulation, stainless cladding (for main fermentation) 4x 2,000L pressure tanks horizontal: 3 bar, incl. cooling jacket, insulation stainless cladding for secondary fermentation and ripening + as serving tanks) 4x 2,000L pressure tanks vertical: 3 bar, incl. cooling jacket, insulation stainless cladding (for fermentation and ripening + as serving tanks) 1x CIP-cleaning agent tank 1x beer- and CIP pump: 0,75 kW 3x beer hoses, food quality 1x malt mill, 2 rollers with motor: 1,5 kW 1x KEG cleaning equipment (10 pcs/hour) 1x Main compressor Bjdpfeuzbb Dox Abtowt

Condition: used, Year of construction: 1999, Overview The micro brewery was manufactured in 1999 by theGerman manufacturer BERAPLAN. All equipment is in good condition. A new wort copper was added in 2018.  List of equipment: 1. Mash Tun Made by Beraplan in 1999 Cylindric shape with conical ground Material: stainless steel AISI 304 Inner diameter: 2000 mm Height: 1600 mm Height conical part: 20 0mm Volume: maximum 38 Hl Double sidewall Insulation Heated by steam, which can be regulated Hot and cold water inlet at the bottom Can be emptied through the bottom 4 CIP balls PT100 2 agitators Mach pump with variable speed drive 2. Lauter Tun Made by Beraplan in 1999 Cylindric shape with flat ground Material: stainless steel AISI 304 Inner diameter: 2000 mm Height: 1200 mm Volume: maximum 37 Hl Filtering ground with trapezoidal perforations High precision valve to regulate the flow rate Hot and cold water inlet at the bottom 4 CIP balls PT100 3. Wort Copper Made by FRACCHIOLLA in 2018 Heated by steam Cleanning balls Temperature sensor Transfer pump from Alfa Laval Solid C-2 (3 kW) 4. Whirlpool Made by Beraplan in 1999 Cylindric shape with flat ground Material: stainless steel AISI 304 Inner diameter: 2000 mm Height: 1250 mm Volume: maximum 40 Hl Double sidewall CIP balls Transfer pump from Alfa Laval Solid C-2 (2,2 kW) 5. Hot Water Tank Cylindric shape with flat ground Material: stainless steel AISI 304 Inner diameter: 2000 mm Height: 2700 mm Volume: maximum 85 Hl Double sidewall CIP balls Transfer pump from Alfa Laval Solid C-2 (7,5 kW) Heated by steam with temperature regulation 6. Heat Exchanger Made by MDC (France) Plate heat exchanger double zone model: RDC 307 Capacity: 30 Hl/h from 85°C to 16°C 7. Ice Water Unit Capacity: 1000 l New pump Bwodjl Hxmdopfx Abtot

Condition: used, Chemical Mixer, Stainless Steel Mixer, Chemical Mixer 2000 L, Used Machine Manufacturer: Chemplex Type: T240 Electrical power: Heating: 20 kW Mixer motor: 3 kW Weighing system: MS-h10/kn, MS-CT-SQB – maximum weighing capacity 3,500 kg Maximum heating temperature: 90 °C Capacity: 2,000 L Description: General-purpose chemical mixer manufactured by Chemplex with a 2,000-liter capacity, designed with an integrated tank weighing system (3 load cells with indicator). The vessel is an atmospheric tank with a DN100 bottom outlet. Heating is provided by a 20 kW electric bottom heater. Bwsdeyc Sfvopfx Abtst The mixer is equipped with a propeller-type agitator. It features a flat lid, which is openable and fitted with a safety grid. The lid includes 4 dosing/inlet nozzles. Recommended operating temperature: 20–60 °C. The bottom discharge nozzle is fitted with a stainless steel ball valve, equipped with a pneumatic actuator and bubble position indicator. The actuator is spring-loaded, providing a fail-safe (safety closed) function.

Condition: used, Year of construction: 2013, Manufacturer : OLSA Model : Fusore CP 1000 Year : 2013 Type : Melter Vessel : Total volume: 1,130 L Operating temperature: −10 to +95 °C Pale anchor-type agitator + scrapers Bottom-mounted dissolver Number of scrapers: 3 Pressure: atmospheric Jacketed : Volume : 55 L Operating temperature: −10 to +95 °C Pressure : 0 - 4 bars Atmospheric pressure Bsdpezxifqsfx Abtjwt Skid: CIAT plate heat exchanger + pump: Year : 2013 Model : PWB8 11 025H00 Min./max. permissible temperature (TS): 0 / 110 °C Min./max. permissible pressure (PS): 0 / 10 bar Test max. pressure (PT): 15 bar Electrical cabinet with PLC + HMI Technical Data available  

Condition: used, Used Wolfking model 100 L BL stainless steel twin-shaft ribbon mixer. - Manufacturer: Wolfking - Model: 100 L BL - Total volume: 110 litre (approximately) Bsdszunvyopfx Abtowt - Mixing chamber dimensions: 770 mm x 501 mm x 305 height mm (approximately) - Type of agitators: Twin uninterrupted ribbons - Dimensions of agitators: diameter 290 mm x 770 mm long (approximately) - Drive: 0.75 kW, 220/380 V, 1400 rpm (belt driven through gearbox) - Includes: Control panel

Condition: used, Very little used Quickstep Anticorro stainless steel reactor. Vessel: - Manufacturer: Quickstep Anticorro - Total/working volume: approx 2897 / 1900 liters - Designed material: Stainless steel AISI 304 - Design type: Clamped dished and hinged top and welded dished bottom - Dimensions: approx 1706 mm diameter x 2471 mm height (3580 mm height with lid open) - Maximum pressure and temperature of the vessel: -1/1 bar at 0 to 100°C - Maximum pressure and temperature of jacket: -1/2,5 bar at 0 to 135°C - Mounted on stainless steel legs. Agitator: - Bottom entry frame agitator MIX Brno model 60 MP 30 - The agitator is designed for mixing creams, gels and ointments with a maximum weight of 1100 kg/m3, maximum viscosity 10000 cP at a temperature up to 100°C and maximum particle size 10 - 80 μm. - Drive through NORD gear drive 7.5 kW, 1460 rpm, 50 Hz - final rpms of the agitator at 50 Hz is 42 rpm. Specifications: Bwsdezunptopfx Abtst Capacity: 1,900 L Type of stainless: AISI 304 Internal Pressure: -1 bar Internal Temperature: 100°C Jacket Pressure: 2 bar Jacket Temperature: 135°C Legs/Lugs: Legs

Condition: like new (used), Year of construction: 2026, operating hours: 1 h, Super special price, as it was on display at our in-house exhibition. Operating hours: 2 Available immediately - subject to prior sale If gone - then gone Compact design, high reliability and an excellent price-performance ratio excellent price-performance ratio: these are the advantages of this machine, which is perfect for briquetting materials such as wood such as wood, polystyrene, foam or paper. Special feature: the screw pre-compaction, which guarantees a guarantees high briquette quality. For quick and easy installation, the C 140 is mounted on a stable base frame. mounted on a stable base frame Bsdpstnz Hbsfx Abtowt Overall dimensions: 1900 x 1410 mm Hopper opening: 1044 x 1044 mm Hopper height: 1010 mm Hopper capacity: 1.1 m³ Drive power: 4 kW Briquette diameter (mm) 40 Throughput capacity (kg/h) 30-40 Hydraulic oil volume (l) 100 Weight (kg) 530 Equipment: Press Powerful pressing mechanism with low-wear, chrome-plated tongs Pre-compressor with end-sensitive cylinder and screwed cover Control box with PLC control Hydraulics Separate oil tank with pump motor and valve control Safety switch for oil temperature Container with agitator and gear motor Screw channel with discharge screw and gear motor gear motor Accessories: Briquette length monitoring Automatic on - off Location: 54634 Bitburg