Used Agitator for sale (476)

Condition: good (used), Year of construction: 2015, Joni OP200 electric steam jacketed mixing kettle Kdjdpfxsy Umz Ro Adlet 2015, DC Norris / Joni OP200, stainless, 200L with agitation and scrap surface, perfect for cooking and mixing stocks, soups, sauces, preserves, pastry fillings and more, can either use tap or tilt to discharge, 3Ph

Condition: used, Year of construction: 2018, Manufacturer : SPXFLOW Lightnin Model : HP-25 A Year: 2018 Type : Stirrer Diameter of the stirring blade: 110 mm Length of the stirring shaft: 825 mm Shaft diameter: 12.5 mm Required pressure: 6 bar Manual pin-type lifting system Lifting stroke: 36 cm Maximum width of a container: 72 cm Dimensions: floor to >mixing head (lower position): 55 mm Dimensions: floor to >agitator head (top position): 415 mm Dimension : 110 x 103 x 150 cm Technical documentation available Kodpfjzcznyjx Adlodt

Condition: good (used), Used BECOMIX heatable/coolable vacuum/pressure vessel with agitator and control cabinet Last use: Pharmacy, cosmetics Ksdpfxjrz N Ngj Adljdt Item number: 10814 Volume: 1400 liters Type: Hanging Material (wetted parts): 1.4571 / AISI316 Version: with double jacket Operating pressure according to type plate: +1/+2.5 bar Max. Max. operating temperature: 0/ +139 °C Tank dimensions: Manhole: 500mm Outer diameter: 1320mm Total height: 1620mm Total width: 1636mm Cylindrical height: 1200mm materials: Interior: 1.4571 / AISI316 External parts: 1.4301 / AISI304 Equipment: Type plate: yes Agitator spray head Switch cabinet 600x500x2000mm Documents: yes

Condition: used, mileage: 2,63,069 km, power: 154 kW (209.38 HP), gearing type: mechanical, fuel type: diesel, color: orange, overall weight: 16,000 kg, empty load weight: 9,840 kg, number of seats: 3, first registration: 06/2002, Year of construction: 2002, operating hours: 10,533 h, Equipment: additional headlights, cabin, hydraulics, Road marking machine: + Hofmann + H75-1000 + Thermoplastic + Electric heater (400V) + Thermoplastic tank with gas heater and hydraulic agitator + Paint and bead spray left / right + Line segment computer + Rear and front warning system + CompAir DLT 0404 compressor with Deutz diesel engine (9,513 operating hours) + Kubota Diesel V1505 drive engine (22,975 operating hours) + Renault Midlum 210 chassis + First registered: 10.06.2002 + 263,069 km; 10,533 operating hours + 3-seater + Manual transmission with reduction gear + Hand throttle Kdedpfoxal A Ujx Adljt Unladen weight: 9,840 kg; permissible total weight: 16,000 kg + 813 cm x 250 cm x 325 cm (LxWxH) Receive all newly listed vehicles by email – sign up for our NEWSLETTER! Errors and omissions excepted, subject to prior sale!

Condition: used, functionality: fully functional, input voltage: 230 V, Hello, we are offering a used paint shaker/agitator from the German manufacturer Collomix, model VIBA 25. Kdjdpfxozmcqio Adlst The device is in good condition and fully functional. It is suitable for containers up to 25 kg. The paint is brought into vibration by a shaking motion, which causes it to mix itself perfectly. We have used this system to mix screen printing inks. However, the system can also be used for a wide variety of paints and coatings. The pre-set time of 1, 2 or 3 minutes can be selected using the selector buttons. The system is currently located in our warehouse in 93476 Blaibach, Bavaria. If you have any questions, please feel free to write to us.

Year of construction: 2018, condition: excellent (used), Sanco Dosing Installation, Year of Manufacture: 2018 Consisting of: - 2x insulated 1200-liter tanks with manhole and agitator - Accompanying platform - 2x PROMASS A flow meters with control cabinets - LKH-5 centrifugal pump - Grundfos pump - Plate heat exchanger - Associated piping The installation was previously used for dosing lecithin, but is also suitable for other products. The unit has been dismantled in working condition and is currently stored in our warehouse. Kdsdpfxjwf Izao Adlet We are happy to assist you further upon serious interest in this installation.

Condition: good (used), Year of construction: 2013, Grote 16L Heated butter pump 2013, stainless, 16L heated butter pump, agitated hopper, discharge screw, mobile, 3Ph Ksdpfx Asy R El Hjdljdt

Condition: used, Year of construction: 1980, Manufacturer: Krieger Model : Molto Mat Universal 100 (MMU 100) Year : 1980 Type: vacuum mixer   Main tank: Total tank volume: 144 L / useful volume: 100 L Working pressure: -1/+2 bars Maximum operating temperature: 120°C Minimum load capacity: 33 L   Jacketed : Capacity: 26 L Ksdpox R A Ursfx Adlodt Maximum operating temperature: 150°C Working overpressure: 4 bars Insulation thickness: 35 mm   Counter-rotating mixer Slow agitation – two speeds : external mixer (anchor) /min: 9/18 – 18/36 inner mixer /min : 17/34 – 34/68 Homogeniser speed three speeds rpm: 1150 / 2300 / 4500   Raise/lower: hydraulic Tilting: hydraulic   Technical documentation available. Weight : 1280 kg  

Condition: used, Year of construction: 1988, Manufacture : Goavec SA Year : 1988 Previous application: Cream tank (fluid/thick) Volume : 10000 Litres Material : 304 stainless steel (Thickness : 25/10) Insulation : yes Tank pressure : atmospheric Agitation : 2.4 KW - 32 rpm 1 fixed paddle: counter-stirring Washing balls: 3 units Inspection hatch: manhole Removable guardrail Kedpfx Ajx R Dknedledt Drawing available (digital version)

Condition: excellent (used), Becomix Universal Homogenising Mixer Model RW3000, Capacity 3000 lts, Complete with piping and control panel. Universal mixer for various cosmetic and pharmaceutical products Kdjdpfxjx Dnilo Adlet Application: Low to very high viscosities - For example, creams, ointments, emulsions, toothpastes, gel products, mascara, make-up. Properties: Homogeniser with internal and external circulation, Anchor agitator with scrapers for horizontal and vertical mixing Short heating and cooling times, Hygienic and dead space-free construction, CIP/SIP, ATEX zone 2 to 0 possible, cGMP

Condition: excellent (used), functionality: fully functional, Natural Dye Mixing Installation Installation for mixing natural dyes consisting of: 2 stainless steel tanks with agitator Internal dimensions of each tank: ø 590 mm x 850 mm External dimensions of the tanks: ø 600 mm x 1650 mm Manifold with 7 valves Manufacturer: GEA Tuchenhagen GmbH Dosing pump Kjdpfow Dfxgex Adlodt Manufacturer: Sera GmbH Flow meter Manufacturer: Endress+Hauser Type: PROMAG A Stainless steel control cabinet Manufacturer: APV

Condition: used, Year of construction: 2013, Overview The brewhouse, including fermentation and storage tanks and a KEG washer, was built in 2013 by the Austrian manufacturer Flecks. The whole equipment is in a very good condition and can be visited. Equipment Mash and brew kettle incl. whirlpool function, agitator, stainless: 1.000 L net Lauter tun, stainless: 1000 L net Calandria system (outdoor cooker), electrical heating, stainless. Integration of existing gas, heating + electrical: 72 kW Vapour-condensation system Whirlpool- system Mash and wort pump: 2,2 kW Hot water tank with electrical heating, stainless: 1000 L, 9 kW Wortcooler GEA 2-stages pT 100, electron. Thermometers Incl. all pipes, fittings, valves in stainless. Full automation upgrade: electrical switch board for full automatic process control switches, fuses: 100 kW Main connection 400 V Emergency switch PC-databus and modem Visualisations and automation software "BRAU-MANAGER" 2x cooling units 2x cooling water pumps 1x 2,000L fermentation tank: 2 outlets, cooling jacket, insulation, stainless cladding (for main fermentation) 4x 2,000L pressure tanks horizontal: 3 bar, incl. cooling jacket, insulation stainless cladding for secondary fermentation and ripening + as serving tanks) 4x 2,000L pressure tanks vertical: 3 bar, incl. cooling jacket, insulation stainless cladding (for fermentation and ripening + as serving tanks) 1x CIP-cleaning agent tank 1x beer- and CIP pump: 0,75 kW 3x beer hoses, food quality 1x malt mill, 2 rollers with motor: 1,5 kW 1x KEG cleaning equipment (10 pcs/hour) 1x Main compressor Kdjdpfx Adsuzbb Djlst

Year of construction: 1989, condition: ready for operation (used), An industrial etching machine from a printed circuit board manufacturing facility for the alkaline development of photoresists is offered. Process sequence: infeed, etch chamber, replenisher, 3-stage rinse, drying and outfeed, max. working width: 550mm, printed circuit board thickness range: 0.2mm-4.0mm, conveyor speed: 0.4m/min-2.5m/min. Including a Nubal unstacker, a drip tray X/Y: 3900mm/1600mm and a 200l dosing unit with agitator. Machine dimensions X/Y/Z: approx. 4000mm/1300mm/1400mm. An on-site inspection is possible. Kdsdoznx Igjpfx Adlst

Condition: excellent (used), Rotary Autoclave BARRIQUAND STERIFLOW 5 Baskets – Industrial Sterilization BARRIQUAND STERIFLOW rotary autoclave with a capacity of 5 baskets, designed for the sterilization, pasteurization, and heat treatment of packaged food products through industrial batch processes. The equipment incorporates a load rotation system during the thermal cycle, allowing the packages to be kept in controlled motion throughout the process. This technology is particularly interesting for products where heat transfer can benefit from agitation, promoting homogeneous heat treatment and, depending on the product and format, optimizing process times. Its 5-basket configuration provides a high capacity for industrial production facilities. MAIN FEATURES -Manufacturer: BARRIQUAND STERIFLOW -Type: Industrial rotary autoclave -Capacity: 5 baskets -Application: sterilization / pasteurization -Load rotation system -Batch heat treatment -Horizontal chamber -Industrial construction in stainless steel -Large diameter front door -Mechanical safety locking system -Motorized drive for rotation -Automatic control of process parameters -Integrated piping and valve system -Designed for industrial operation -Integrable into automatic sterilization lines PROCESS Kdjdszbt Szopfx Adlst The 5-basket BARRIQUAND STERIFLOW rotary autoclave is designed to perform controlled heat treatments on previously packaged products. The baskets are placed into the chamber, and once closed, the programmed cycle is executed through the heating, thermal holding, and cooling phases. During the treatment, the system allows for controlled rotation of the load, generating product movement within the package when its characteristics allow. This can favor heat transfer and achieve a more uniform thermal distribution. It can be integrated with: -Basket loading and unloading systems -Basket conveyors -Automatic loaders and unloaders -Transfer systems -Process water preparation equipment -Automatic sterilization lines APPLICATIONS Especially suitable for canning industries, manufacturers of ready-made meals, sauces, vegetable products, meat products, pet food, and other food industries that require industrial sterilization or pasteurization processes. Depending on the configuration and process, it can be used with cans, jars, and other packaging compatible with heat treatment and rotation in the autoclave. The combination of BARRIQUAND STERIFLOW technology, rotary system, and 5-basket capacity provides a particularly interesting solution for industrial sterilization facilities with high capacity. Machine available for inspection. Additional technical information, dimensions, additional photographs, or videos can be provided upon request.

Condition: used, Model MDH 2 Hosokawa Micron Dryer Flash Drying of Filter Cakes, Powders and Granules. Model MDH 2 Micron Dryer manufactured by Hosokawa Micron. Machine was built in 1995 for a pilot plant operation drying a Precipitated Calcium Carbonate (PCC) Filter Cake. The dryer ran periodically for around 2 years and has been in storage ever since. Installed Power – 30 kW (Rotor) 2,2 kW (Classifier) Airflow - 3,000 m3/hour Evaporative 310 kg H2O/hour Ksdpfx Adszvxvajledt Capacity - Scope of supply includes agitated twin screw feeder and lubrication system (for rotor drive). In-built dynamic classifier provides control on particle size and retention time. Equipment is offered in "as is" condition with no warranty given or implied. PPDS can offer full refurbishment services. Inspection is invited at our premises in Uttoxeter, Staffordshire, United Kingdom (close to East Midlands, Birmingham and Manchester airports). Powder Process Design Services Ltd has been supplying equipment and systems to the industrial minerals sector for over 20 years. We specialise in the design and supply of minerals processing systems using a combination of new and s/hand refurbished equipment. With approaching 40 years experience we aim to deliver projects that meet and indeed exceed clients expectations. We have satisfied customers throughout the world, including, the United States, South America, New Zealand, South Africa the Middle East and the UK and Ireland. Please check out our other listings and subscribe to our stock list.

Year of construction: 2016, operating hours: 50 h, condition: like new (used), functionality: fully functional, Impiantinox Easybräu SCB 500 brewing system Kdsdpfsq H Azzsx Adlot consisting of mash/boiling kettle, lauter tun, hot water tank Agitator in the mash tun Chopper in the lauter tun Electrically or steam heated Electrical connection 40 kW Steam condenser in the boiling kettle Brewing volume from 3.5- 7 HL Complete internal piping with pumps, electric heating Heat exchanger for wort cooling Wort aerator

Year of construction: 2015, condition: good (used), Able Engineering 500L Tank Chocolate Tank Kdjdjwwp Tzepfx Adlot 2015, Stainless, 500L capacity, jacketed mixing tank, Top mounted agitator, central bottom discharge into jacketed Rotan Pump all mounted on skid with load cells, 3Ph

Condition: used, Year of construction: 2016, // Equipment dismantled and stored in our warehouse // Manufacturer: Italvacuum Model: Cosmodry System IHD 3200 Year: 2016 Type: horizontal vacuum paddle dryer Application: drying wet powders ATEX (Eex) unit: yes Industries: Fine chemicals, pharmaceuticals (API), intermediates A) Agitation: Concentric agitator with heated shaft, removable in several segments (double mechanical seal) Transmission: (CEMP) - Power 30 kW + Gearbox + Chain Agitation speed: 1.6 ÷ 8.1 rpm Atex: explosion-proof ATEX II 2GD Mounted with the dryer on a support structure (single SKID) B) Drying chamber with discharge valve Total volume : 3200 Liters Useful volume : 30% - 80% Internal pressure : -1 / 0,5 barg Jacket pressure : 0 / 1,7 barg Project temperature : -10 / +130°C Maximum heating fluid temperature: +100°C Best vacuum tightness: 4 mbar/h EX-I absolute pressure transmitter PT100 Ex-i product temperature sensor Nitrogen backwash system Rotary chopper speed: 300 / 1200 rpm (not installed) Material in contact with the product: AISI 316L - EN 1.4404 Vacuum seals: PTFE and FEP Jacket material: AISI 304 - EN 1.4301 Heating fluid: Diathermic oil Mirror-polished interior finish (Ra ≤ 0.4 µm) Satin exterior finish (Ra ≤ 1.2 µm) Inspection and Shut-off Valve DN.1650 Buffer Relief Valve DN 200/300 DN 250 Butterfly Loading Valve Prepared for the installation of two choppers (lateral knives) C) Process filter D) Vacuum unit: SAURUS939 piston vacuum pump, model VVD Kodpfsx R D Efjx Adljdt Pump support bench ATEX: Ex-d-IIB-T4 – IP55 Power: 11 kW Atmospheric pressure surface condenser, model VD200I E) Vacuum condensing unit - AISI 316L stainless steel with double cooling jacket in AISI 304 stainless steel. Internal design pressure: -1 / 0.5 barg Jacket design pressure: 0 / 3 barg Design temperature: -10 / 40 °C Maximum cooling liquid pressure: 2.5 bar Exchange surface area: 8.5 m2 Condensate collection capacity: 900 litres Level sensor F) External safety filter G) Temperature control system: Heating/Cooling Steam liquid heater: Pressure 7 bar - Jacket temperature: 142°C - Surface area: 1.65 m2 Cooler, mounted on the heater: cold water or brine - Pipe jacket pressure: 12 barg - Jacket temperature: 142°C - Pipe temperature: -10°C /+ 99°C - Surface area: 3.42 m2 H) Command and Control System (Electrical Cabinet + HMI) Complete technical file

Condition: used, Year of construction: 1974, Manufacturer: Grenier - Charvet Model: E 35 Year: 1974 ( Compliance file dated 2001) Type : High viscosity paste mixer   Motor power : 35 CV - 25 KW Speed variation: mechanical Previous use : Paint tank 1160 L and 440 L Agitation tool: Ø 1260 mm butterfly/clover type (Ø 950 mm possible) Vessel clamping: pneumatic   Vertical movement: hydraulic unit Height in low position: 2770 mm Height in high position: 4070 mm Kodpfex R A Acox Adljdt Stroke: 1300 mm   Technical file available

Condition: like new (used), functionality: fully functional, fuel type: electric, overall weight: 900 kg, lifting height: 26 mm, drive condition: 100 %, Year of construction: 2025, hydraulic flow rate: 9,000 l/min, For sale is a new, unused, ex-display EVAK ETP submersible slurry pump, designed for pumping heavy and highly abrasive slurries. This pump offers an attractive price alternative to slurry pumps of a similar class offered by TOYO and Dragflow. It is designed, among other applications, for pumping mixtures of water with sand, sludge, gravel, bentonite, slag, coke, and other sediments containing heavy solid particles. It can be used for desilting tanks, cleaning sedimentation tanks, extracting aggregates and minerals, and in construction and dredging works. The pump is equipped with a mechanical agitator, which stirs up the material at the bottom and facilitates its transport to the impeller. The components most susceptible to wear – the impeller, the inlet plate, and the agitator – are made of high-chromium steel containing 24–28% chromium. The low-speed, six-pole motor, operating at 960 rpm, reduces the wear of hydraulic parts when working with abrasive materials. The pump has a closed impeller, replaceable wear plates, and adjustable clearance for the lower plate. Key parameters: Motor power: 37 kW Power supply: 400 V / 50 Hz Rated current: 71 A Kdjdpfszlz T Hex Adljt Maximum flow rate: up to 550 m³/h Maximum head: up to 26 m Maximum solid particle size: 60 mm Allowable dry solids content: up to 50% by weight Rotational speed: 960 rpm Motor insulation class: F Maximum medium temperature: 40°C Maximum immersion depth: 20 m Power cable: 20 m, H07RN-F Direct-on-line (DOL) starting or soft-start/inverter starting is possible. Factory-installed suction basket and agitator. Condition of the equipment – the pump is: new and unused an ex-display unit covered by a 60-day start-up warranty available for immediate sale.

Year of construction: 2015, condition: ready for operation (used), 1) Eccentric screw pump Johstadt AFJ 70.1 S, year of manufacture: 2011. 2) Eccentric screw pump Johstadt FJ 70.1 S, year of manufacture: 2015. 3) Eccentric screw pump Stöber/HEW/Netzsch DC30-2061-200-U/EEXF100L/U/NE40B, year of manufacture: 1989. 4) Centrifugal pump Stork CN32-200G1S3L1, year of manufacture: 1997. 5) Centrifugal pump Siemens&Hinsch m.b.H/Loher&Söhne AKHK6101/eA132 MA-U, year of manufacture: 1970. 6) Centrifugal pump with electric motor EMK/SPX EC2-HS160M1-2/CC40-200 R6S2L2. 7) Electric motor Siemens 1LA2 130-2CA60, year of manufacture: 1997. 8) Electric motor VEM. VEM electric motor. 9) Electric motor with gearbox Nord SK 132 S/4-2 TF, SK 33-132S/4-2 TF, year of manufacture: 2011. 10) Blower Gebhardt Ventilatoren KEM 61-0200-4 X-14-11. 11) Side channel pump SERO/HEW SVM 111 K,V,60-2,32 Dex 80L/4K, year of manufacture: 2015. 12) Side channel pump SERO/VEM SVM 111 K,V,60-2,32 kPER 80G4 FDS, year of manufacture: 2013. 13) Electric motor with gearbox Getriebebau Nord SK 132 S/4 TF, SK 472-132 S/4 TF. 14) Electric motor with gearbox Getriebebau Nord SK 25-100 L/4 ED, SK 100 L/4 ED. 15) Electric motor with gearbox Getriebebau Nord SK 100 L/40, SK 25-100 L/40. 16) Side channel pump SERO/HEW SVM 111 K,V,60-2,32 DCEx 80L/Ur, year of manufacture: 2015. 17) Centrifugal fan Hürner-Funken GmbH/MM Antriebstechnik HF R160-17D/FY 71 A-4 T, year of manufacture: 2001. 18) Centrifugal fan Konz Lufttechnik/ABB Motors MPR 351/M2V AD 80 B-2, year of manufacture: 2006. 19) Axial fan Helios HRFD 35/4 TK. 20) Centrifugal pump Bedu CRT 70/3, year of manufacture: 2015. 21) Electric motor with gearbox and magnetic field coupling Nord Drivesystems/Varisco SK 33-132MP/4 TF, V 60-2 STGTRM+X+Y, year of manufacture: 2017. 22) Pneumatic agitator PTM. 23) Pneumatic agitator. 24) Pneumatic agitator WP ARO MRV050A/6150051-14-P. Including various stators for progressive cavity pumps. Documentation available. On-site inspection is possible. Individual sale possible. Kdodpjv Extbsfx Adljt

Condition: used, Year of construction: 2015, operating hours: 6,123 h, total width: 1,500 mm, total height: 1,700 mm, total length: 2,000 mm, briquette diameter: 50 mm, space requirement width: 1,500 mm, space requirement length: 2,000 mm, space requirement height: 1,700 mm, power: 5.5 kW (7.48 HP), filling opening length: 1,040 mm, filling opening width: 1,040 mm, No. 04545 Briquetting press with screw conveyor WEIMA C 150 Used, year of construction 12/2015, 6123 operating hours, very good condition Hydraulic briquetting press for compacting dry wood shavings, sawdust, paper, cardboard and comparable materials Throughput capacity (depending on material) approx. 30 - 50 kg/h Briquette diameter 50 mm Motor power 5.5 kW Hydraulic pressing mechanism Max. clamping jaw stroke 10 mm Storage hopper with discharge arm / agitator Level sensor for automatic operation Manual and automatic operation Siemens SIMATIC PLC control Briquette length monitoring for the production of uniform briquettes Storage hopper approx. 1040 x 1040 mm LW Separate hydraulic unit with oil tank CE-compliant Incl. screw conveyor type RFS. NW 250 x 5200 Motor power 1.5 kW Conveying capacity approx. 4.0 m3/h Filling opening approx. 900 x 300 mm LW Kdjdszpxhiepfx Adljt Incl. geared motor, feeding section and protective covers Incl. complete technical documentation Transport dimensions briquetting press approx. 2000 x 1500 x 1700 mm LWH, weight approx. 1000 kg Transport dimensions screw conveyor approx. 6500 x 500 x 500 mm LWH, weight approx. 800 kg To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended Sold as is Technical specifications, condition description, year of construction and scope of delivery according to manufacturer’s brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Payment terms: Prices plus VAT, payment before collection or shipment Delivery terms: ex warehouse

Condition: used, mileage: 3,18,699 km, power: 235 kW (319.51 HP), first registration: 09/2006, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, next inspection (TÜV): 04/2026, color: blue, gearing type: semi-automatic, emission class: euro3, Equipment: ABS, air conditioning, * ABS * ASR (traction control) Kdjdpfx Asw S Agpsdlot * On-board computer * Cruise control * Hill-start assist * Analog tachograph * Electric window regulators * Electrically adjustable mirrors * Mirror heating * Central locking * Roof hatch * Rear window * Longitudinal and transverse differentials locks * AP axles * Steel bumper * Air dryer * Air-suspended driver's seat * 16-speed * Suspension: leaf spring * Payload: 6,080 kg * Retarder: engine brake ----Body: Schwing concrete pump P 2023-110/75 RB, 4-section, Z-fold, 4 arms, distributor boom KVM 24-4 H (Vector), max. vertical reach 23.1 m, max. horizontal reach 19.5 m, max. depth reach 13 m, slewing range 370°, delivery line (pipe DN) 125, 3 m end hose, max. output 114 m³/h, max. delivery pressure 80 bar, radio remote control + cable remote, fully hydraulic 4-point outriggers, oil cooler, centralized lubrication, high-pressure water pump. Read operating hours: Pump 5,133 h, Boom 6,369 h, Water pump 555 h, HP-pump 45 h, Agitator 9,820 h, Vibrator 581 h----Low folding height (under 5 m), also ideal for indoor operation! Sale to commercial customers only. FOR EXPORT SALES, ONLY THE NET PRICE IS PAYABLE!!!!! ALL INFORMATION SUBJECT TO CHANGE, ESPECIALLY EQUIPMENT AND ACCESSORIES. All contracts for sale, invoices, pro forma invoices, orders, and sales discussions are subject to our general terms and conditions (see legal notice/imprint).

Condition: used, functionality: fully functional, operation weight: 147 kg, Hand-operated agitator cooker: + Green + Type HR 180i + Burner output: 50 kW + 152 cm x 115 cm x 135 cm (l x w x h) + Weight: 147 kg Kdsdpfozgbknjx Adljt Receive all newly listed vehicles by email – sign up for our NEWSLETTER! Errors and typos possible, subject to prior sale!

Condition: like new (used), pressure: 2 bar, temperature: 131 °C, power: 45 kW (61.18 HP), usable tank capacity: 125 l, Homogenizer Mixer CML125 Key Data: • SYMEX CML125 • Working volume: 125 L • Anchor agitator with scrapers and flow breaker 19 ... 82 rpm • Homogenizer with reversible operation (homogenizing/pumping mode) 5 - 21 m/s • Circulation line • CIP (Cleaning in Place) • Lid hydraulically liftable • Control via touch display • Heating, cooling, vacuum, ... • New seals • Pharmaceutical version, but also suitable for cosmetics Media Supply: • Cooling water supply: approx. 1.5 m³/h at 3 bar • Cooling water for vacuum pump: approx. 0.3 m³/h at min. 2 bar Kdodpsyf N H Ajfx Adlst • Compressed air: approx. 2000 L/min at 8 bar • Power supply: 3x400V at 50Hz; 45.0 kVA / 45.0 kW • Steam: 6-8 bar, 45 kg/h The machine is factory-refurbished and can be inspected. We provide full “turnkey” project management, including on-site installation and commissioning at your facility.