Used Agitator for sale (709)

Condition: new, Year of construction: 2024, machine/vehicle number: 30065973-10, Unused 100-liter Ekato Twin Motion Vacuum Mixer, model UniMix, type SRC 100, with 316L stainless steel product contact surfaces. It has a 100-liter maximum working capacity and a 5-liter minimum working capacity, rated for -1/+2 bar (29 psi and full vacuum) at 133°C, and jacketed for -1/+4 bar (58 psi and full vacuum) at 151°C. Features include a top-mounted Ekato Paravisc axial Z-type mixer with bottom and sidewall scrapers, driven by a 3 kW motor. It also has a bottom-mounted Ekato S-Jet 500 high-performance rotor/stator homogenizer powered by a kW motor, 480 volts, and a control panel with PLC and VFD controllers, as well as an operator HMI. The vessel is ASME-rated, with Ekato project# 30065973-10, built in 2024. The system is unused, still on its original shipping skids from Ekato, with FAT performed. Nsdpfx Adeyba Szewekt

Condition: good (used), Agitator bowl made of stainless steel (V2A), horizontal Technical data / dimensions Available quantity: 2 Volume: approx. 15,000 liters Tank type: Agitator tank Condition: used Suitable for food: yes Design: horizontal above ground Internal diameter: approx. 2,000 mm Cylindrical length: approx. 4,500 mm Total length: approx. 5,300 mm Specific weight of the medium: 1.05 to/m³ Operating pressure: unpressurized Wall thickness of bottom: approx. 2.3 mm Wall thickness shell / cylinder: approx. 2 mm Remarks: Mash tun Nsdpfx Ajty Np Hsdwokt Material / composition Material inner jacket: V2A (1.4301) Feet material: V2A (1.4301) External surface: Front base Features Base shape: Profile feet Number: 6 Fastening: fixed Base type: dished base Front shelf: 1 x oval manhole (approx. 430 x 330 mm) 1 x residual drain DN 80 1 x bearing for agitator shaft Jacket: 1 x manhole with hinged cover and DN 50 vent nozzle Rear base: 1 x agitator motor Notes: An optional catwalk is available for the two containers available for the two containers, with which the two containers can be walked on (surcharge: 450 €). Agitator Agitator available Type of agitator: Beam agitator Classification: Slow speed Quantity: 1 Installation: lateral Speed: 1,450 rpm Agitator power: 4.8 kW Bottom bearing for agitator shaft available Manufacturer: Leroy Somer Notes: Agitator shaft passes horizontally through the center of the tank

Condition: used, Year of construction: 2000, Manufacturer: Guedu Rosenmund Model: RGFD 1.1 Year: 2000 Type: Agitated Nutsche Filter / Dryer Filtration area: 1.1 m2 Capacity : 1350 Litres Pressure : -1 / 3,9 bar Half shell : 20 litres Mixer Empty weight : 3200 Kg 316 L stainless steel Agitation up/down stroke: 400 mm Application: solid-liquid separation of mixtures to be filtered under pressure and/or vacuum Hydraulic group Electrical cabinet Nkedpfx Ajx R Didjdwst Complete technical file with certificates and drawings.

Condition: used, 17 tonnes 15 m3 Nksdpfx Ajx Rz R Sodwet Inox Agitated tank 15 m3

Condition: used, Manufacturer : Vatron MAU Agitation: Rayneri Typhoon impeller diameter Ø400 / 3 kw / 323 rpm - Polished stainless steel, thickness 6 mm - Diameter. 2000 mm Nsdox Rz Nhopfx Adwskt - Double insulation jacket 30 mm / stainless steel sheet 3 mm - Washing turbine - AC & vacuum connections

Year of construction: 2012, condition: excellent (used), Number: 14395 Content: 160 liters Tank speed: 21 to 81 rpm Agitator speed: 76 to 287 rpm Power: 5,5 kW Dimensions: 920 x 1,200 x 2,200 mm Nsdpfxen I I R Aj Adwjkt Weight: 0,8 t Condition: very good, was previously used in the ceramic industry

Condition: not inspected (used), Volume: Approx. 6000 L Nkedpfx Aohg Niqodwet Type: Standing on three feet Tank diameter: 2250mm heatable/coolable double jacket Enamelled tank

Condition: not inspected (used), Volume: Approx. 6000 L Nsdpfx Adshg Nk Dowjkt Type: Standing on three feet Tank diameter: 2250mm heatable/coolable double jacket Enamelled tank

Condition: not inspected (used), Volume: Approx. 5000 L Type: Standing on three feet Tank diameter: 2100mm heatable/coolable double jacket Nedpfx Ashg Nlpedwjkt

Condition: good (used), functionality: fully functional, Year of construction: 2007, operating hours: 1,153 h, DYNO-MILL KD 6 Agitator Bead Mill (2007) For sale is a DYNO-MILL KD 6 horizontal agitator bead mill, manufactured by Willy A. Bachofen AG (WAB). This machine is a premium Swiss-made unit designed for the continuous dispersion and wet-grinding of pumpable products, ranging from low to high viscosity. This unit was manufactured in 2007 and decommissioned in fully functional, running condition with no known faults. It is distinguished by its exceptionally low usage history, having logged only 1’153 operating hours. It comes equipped with a high-wear-resistant Silicon Carbide (SiSiC) inner cylinder and hardened stainless steel discs. It is sold as a complete bundle, including a peristaltic pump, a tool kit, the original electric cabinet and yttrium-stabilized zirconium balls (used). Highlights • Low Usage: Only 1'153 operating hours—internal mechanics are in excellent condition. • High-End configuration: Fitted with a ceramic Silicon Carbide (SiSiC) inner cylinder (6mm wall thickness) and hardened stainless steel discs for durability and contamination control. Sintered Silicon Carbide (SSiC) prevents product overheating significantly better than Zirconium or Steel liners. • Ready to Run: Sold as a complete package including the Electric Cabinet and a Peristaltic Product Pump. • Features the industry-standard WAB dynamic gap separator and pressure-balanced mechanical seal. • Voltage: Fitted with a modern Danfoss VLT frequency converter featuring wide-range input (380-480V, 50/60Hz), making the machine immediately compatible with both European (400V) and US (480V) power grids without modification Technical Specifications • Manufacturer: Willy A. Bachofen AG (WAB), Switzerland • Model: KD 6 • Grinding Chamber Volume: 6.0 Liters (Net volume ~5.7 Liters) • Throughput: approx. 50 – 200 kg/h (dependent on product/viscosity) • Main Drive: 11 kW Motor (440V / 60Hz rated) • Separation System: Dynamic gap separator (Tungsten Carbide rotor/stator) with adjustable gap width (0.15–1.0 mm) • Shaft Seal: Double mechanical seal (DGD) with integrated pressure rinsing circuit • Cooling: Forced water cooling jacket for the grinding cylinder • Weight: 695 kg 
 Scope of Delivery • Mill: DYNO-MILL KD 6 base unit • Grinding System: Silicon Carbide (SiSiC) Inner Cylinder & Hardened Stainless Steel Discs • Feed Pump: Peristaltic Pump included • Controls: Original Electric Cabinet included • Grinding Media: Ceramic Beads, Zirconia Partially Stabilized with Yttria, four sizes, each approx. 25Kg (0.4 - 0.6 mm / 0.8 - 1.0 mm / 1.2 - 1.4 mm / 1.6 - 1.8mm) • Documentation: Operating instructions and wiring diagrams Nodpfsx Tdyzex Adwjkt Condition • Mechanical: Excellent, running condition with no known faults at the time of decommissioning. • Cosmetic: The machine is clean but shows minor cosmetic wear (see pictures for visual details) • Last application: Food Typical Applications • Ideal for fine particle size reduction in industries such as: • Paints, Inks, and Coatings • Agrochemicals and Chemicals • Life Sciences and Microbiology • Food and cosmetics We ship worldwide. If you are interested or have any questions, please get in touch! Can be inspected in Liestal, Switzerland.

Condition: used, Year of construction: 1996, functionality: fully functional, total length: 2,050 mm, total width: 1,020 mm, total height: 2,820 mm, overall weight: 3,050 kg, rotational speed (max.): 1,480 rpm, Offered are two ball mills, model Cobra 751, from manufacturer Bühler. Both machines come together with a pre-mill (model SRK-690) from the same manufacturer. All machines are in used condition but are fully operational. All machines comply with up-to-date safety standards. An inspection of the machines is possible upon request and by appointment. We are available for any further questions. The stated price is for one pre-mill and one ball mill together, not for all 4 machines! Njdexldumspfx Adwjkt

Year of construction: 2022, condition: new, Stainless steel execution Motor power 1 .1kw Nksde Hnmvjpfx Adwjt left - right rotation Stirring wave length 1000 mm Mixing blade diameter 150 mm

Condition: like new (used), Vertical stainless steel storage tank 20 m3 with agitator, 4 ss legs, manhole, valve, pump, motor 10,6 kW.... Nkodpfx Adsiuc Skewst

Condition: used, tank capacity: 2,500 l, GENERAL Construction type: upright Remarks: manhole diameter approx. 390 mm Speed: 950 rpm Internal diameter: 1,590 mm Explosion-proof: Motor is explosion-proof (compliance with current ATEX regulations under local conditions must be verified) Total height: 2,850 mm Power: 9.7 kW Agitator: propeller Base type: feet Location: Bremen Volume: 2,500 liters Product-contacting material: V2A 1.4301 (AISI304) Condition: used Cylindrical height: 1,200 mm Last application: cosmetics TANK Number of feet: 4 pcs EQUIPMENT Manhole / access dome: on top head Outlet: DN50 DIN 11851 Note: slight residue inside Nkjdjxqdkrjpfx Adwot MATERIAL SPECIFICATION Foot material: stainless steel AGITATOR 1 Voltage: 380 volts Agitator arrangement: bottom-mounted

Condition: used, Year of construction: 2019, tank capacity: 50,000 l, GENERAL Design: vertical Year of manufacture: 2019 External diameter: 3,600 mm Total height: 5,200 mm Insulation: available Power: 1.1 kW Agitator: propeller Base design: standing ring (stand leg frame) Location: outdoor storage Technical documentation: CE marking and declaration of conformity Volume: 50,000 litres Product-contact material: V2A 1.4301 (AISI304) Condition: used Last application: milk TANK Bottom: flat bottom INSULATION Insulation jacket: welded EQUIPMENT Manhole / dome: in the cylinder AGITATOR 1 Nkedjxqdgaopfx Adwst Voltage: 400 Volt Agitator arrangement: side-mounted on the cylinder

Condition: used, tank capacity: 15,000 l, GENERAL Equipment: Venting, lifting lugs Design: vertical Remarks: The tank has only undergone a test run with water Nsdpfx Aoxqdbwedwekt External diameter: 2,240 mm Total height: 4,850 mm Power: 0.75 kW Agitator: propeller Mounting type: Height-adjustable feet Location: outdoor storage Volume: 15,000 liters Product-contact material: V4A 1.4401/04 (AISI316) Condition: used Cylindrical height: 3,750 mm TANK Bottom: conical bottom Number of feet: 4 units EQUIPMENT Manhole / Dome: on top cover Outlet: available MATERIAL SPECIFICATION Feet material: stainless steel AGITATOR 1 Agitator position: mounted laterally on the cylinder

Condition: used, tank capacity: 5,100 l, GENERAL Design: upright Remarks: Agitator drive missing; minor dents on the insulation jacket (see photos) Outer diameter: 1,550 mm Nsdjxqdbdspfx Adwekt Inner diameter: 1,400 mm Total height: 4,500 mm Insulation: present Agitator: propeller Support type: feet Location: outdoor storage Volume: 5,100 liters Product-contact material: V2A 1.4301 (AISI304) Condition: used Cylindrical height: 3,340 mm TANK Number of feet: 3 pieces INSULATION Insulation jacket: riveted Insulation material: mineral wool Insulation thickness: 50 mm EQUIPMENT Manhole / Dome: on top head (DN 500) Outlet: DN50 DIN 11851 AGITATOR 1 Agitator arrangement: eccentric in top head

Condition: used, tank capacity: 5,200 l, GENERAL Equipment: Disc valve, crane lugs Design: upright Remarks: Agitator element and shaft are present, drive unit is missing Outer diameter: 1,600 mm Inner diameter: 1,400 mm Total height: 5,120 mm Insulation: present Agitator: Propeller Support type: feet Location: external storage Volume: 5,200 litres Product-contact material: V2A 1.4301 (AISI304) Condition: used Cylindrical height: 3,430 mm TANK Number of feet: 3 pcs INSULATION Njdpfx Asxqdagedwekt Insulation jacket: hermetically welded Insulation material: rock wool Insulation jacket material: stainless steel EQUIPMENT Manhole / Dome: on upper head (DN 400) Outlet: DN50 DIN 11851

Condition: used, tank capacity: 7,000 l, GENERAL Equipment: Disc valve, crane lugs Design: upright Outer diameter: 1,800 mm Insulation: available Agitator: propeller Stand type: feet Location: outdoor storage Volume: 7,000 litres Product-contact material: V2A 1.4301 (AISI304) Nkjdpexqdaaofx Adwet Condition: used Cylindrical height: 3,500 mm TANK Number of feet: 3 pcs INSULATION Insulation jacket: welded Insulation material: rock wool Insulation thickness: 50 mm EQUIPMENT Manway / dome: on top Outlet: available AGITATOR 1 Agitator arrangement: eccentric in top plate

Condition: used, tank capacity: 6,500 l, GENERAL Equipment: Spray head, crane lugs Design: upright Remarks: 1 dent in the cylinder Inner diameter: 1,940 mm Overall height: 3,900 mm Agitator: Jet mixer Base type: Height-adjustable legs Volume: 6,500 liters Product contact material: V2A 1.4301 (AISI304) Condition: used Cylindrical height: 2,000 mm Previous use: Food (syrup) TANK Number of legs: 3 pcs Nkedjxqc Uvepfx Adwet EQUIPMENT Manhole / dome: in the cylinder, in the top head Outlet: pipe end approx. Ø 50 mm Note: Outlet pipe cut off MATERIAL SPECIFICATION Legs material: stainless steel AGITATOR 1 Agitator arrangement: side-mounted on cylinder Agitator equipment: jet mixer agitator (pipe for mixing tank contents using an associated pump)

Condition: used, tank capacity: 14,000 l, GENERAL Equipment: Spray head Design: upright Remarks: Insulation around top head and cylinder, not around bottom head; spray head connection slightly bent and weld seam on the top head cracked; discharge pipe internal diameter approx. 50 mm, widens towards its cut-off end to approx. 65 mm Speed: 13 / 26 rpm External diameter: 2,700 mm Internal diameter: 2,480 mm Total height: 4,100 mm Insulation: present Power: 1.5 / 2.2 kW Agitator: beam agitator Agitator component: agitator flange Type of stand: height-adjustable feet Location: Bremen Volume: 14,000 litres Product-contact material: V2A 1.4301 (AISI304) Condition: used Cylindrical height: 2,350 mm Last application: Dairy TANK Number of feet: 4 pcs INSULATION Insulation jacket: welded Insulation jacket material: stainless steel EQUIPMENT Nksdpoxqc S Uofx Adwet Manhole / Dome: in cylinder (approx. 350 x 450 mm) Outlet: present MATERIAL SPECIFICATION Feet material: stainless steel AGITATOR 2 Agitator arrangement: side-mounted on cylinder AGITATOR 1 Voltage: 400 Volt Bottom bearing:

Condition: used, tank capacity: 550 l, GENERAL INFORMATION Nkjdpjxqc S Iefx Adwst Features: Air/ventilation system, disc valve Design: vertical Speed: 0 - 85 rpm Internal diameter: 820 mm Total height: 1,850 mm Power: 0.75 kW Max. viscosity: 5,000 mPas Top: agitator traverse with folding lid Agitator: blade agitator Base design: PE base Location: Bremen Technical documentation: drawing, CE marking and declaration of conformity, assembly instructions, operating manual Nameplate: Volume: 550 liters Product-contact material: V2A 1.4301 (AISI304) Condition: factory-new Cylindrical height: 1,034 mm TANK Max. permissible operating temperature: 80°C EQUIPMENT Outlet: DN50 DIN 11851 MATERIAL SPECIFICATION External surface: marbled Internal surface: high gloss Material of feet: plastic AGITATOR 1 Voltage: 400 V Agitator arrangement: eccentric in top plate Agitator features: NORD frequency inverter 400V IP55 NORD helical gear unit made with latest aluminum technology Gear unit with stainless steel seal flange and oil leakage indicator Gear unit filled with food-grade Klüber oil Gear motor unpainted

Condition: used, tank capacity: 8,000 l, GENERAL Equipment: Spray head, lifting lugs Design: vertical Remarks: Minor dents in insulation jacket; some small cracks in the weld seams of the feet (see photos); 1 tank with nameplate (the outlet end of this tank is cut off) Speed: 42 rpm Outer diameter: 2,100 mm Inner diameter: 2,000 mm Total height: 4,550 mm Insulation: present Power: 2.2 kW Agitator: Beam agitator Support type: Feet Location: Bremen Volume: 8,000 liters Product-contact material: V2A 1.4301 (AISI304) Nkjdpexqc Szsfx Adwjt Condition: used Cylindrical height: 2,500 mm Previous application: Dairy TANK Number of feet: 3 pcs INSULATION Insulation jacket: hermetically welded Insulation jacket material: Stainless steel EQUIPMENT Manhole / dome: in top head Outlet: 65 mm MATERIAL SPECIFICATION Feet material: Stainless steel AGITATOR 1 Agitator arrangement: eccentric in top head Agitator features: Tanks with different impeller diameters; 1 tank with bottom bearing, the other tank without

Condition: used, tank capacity: 5,000 l, GENERAL Equipment: Spray head Design: upright Remarks: 1 dent in the inner tank (overpressure from the non-functional heating jacket; see photos); insulation jacket with minor dents and partially detached panels; tank has interior residues; mounts for load cells under the feet (3 loose load cells are included in the scope of delivery; these were not considered in the total height specification) Speed: 52 rpm External diameter: 1,900 mm Internal diameter: 1,790 mm Total height: 4,150 mm Agitator manufacturer: Jongia Insulation: available Power: 0.37 kW Agitator: paddle agitator Agitators: 3 agitators Agitator element: propeller Support: feet Location: Bremen Volume: 5,000 liters Product contact material: V4A 1.4401/04 (AISI316) Condition: used Cylindrical height: 2,100 mm Last application: food TANK Number of feet: 3 pcs INSULATION Insulation jacket: bolted Insulation jacket material: stainless steel EQUIPMENT Nkjdpjxqc Sbjfx Adwet Manhole / dome: in the top head (DN 500) Outlet: 48 mm MATERIAL SPECIFICATION Foot material: stainless steel AGITATOR 2 Agitator arrangement: off-center in the top head Speed: 450 / 965 rpm Voltage: 400 V Power: 1.1 / 4.4 kW AGITATOR 1 Agitator manufacturer: Jongia Voltage: 230/400 V Agitator arrangement: central in the top head Agitator equipment: Propeller 3: agitator data no longer reliably readable; probably 460 / 920 rpm

Condition: used, tank capacity: 10,000 l, GENERAL Design: upright Remarks: Minor differences in construction, e.g., outlets; rectangular opening approx. 600 x 600 mm in the top; various small rust spots on the outside (see photos); 2 vessels with a dent in the cylinder; some connections on the top are bent Internal diameter: 2,200 mm Total height: 3,900 mm Top: flat top Agitator: agitator flange Stand type: feet Location: Bremen Nameplate: Volume: 10,000 liters Product-contact material: V2A 1.4301 (AISI304) Nkjdpfoxqca Ssx Adwet Condition: used Cylindrical height: 2,750 mm Previous use: detergent production VESSEL Number of feet: 4 pcs FEATURES Outlet: available Note: minor adhesions MATERIAL SPECIFICATION Foot material: stainless steel AGITATOR 1 Agitator arrangement: side-mounted on cylinder