Used Albert Goecker Kg for sale (68,439)

Condition: good (used), Year of construction: 2012, operating hours: 12,078 h, functionality: fully functional, pressing force: 88 t, filling opening width: 1,100 mm, filling opening length: 1,800 mm, bale width: 1,100 mm, bale height: 750 mm, bale weight: 750 kg, overall weight: 30,000 kg, oil tank capacity: 2,000 l, power: 98 kW (133.24 HP), volume flow: 643 m³/h, Technical data baler: Manufacturer HSM GmbH + Co. KG, Germany Type VK 8818 R-FU Year of construction 2012 Total operating hours: 12,078 hours, as of September 2025 Pump operating hours 6,616 hours (effective pump running time) Number of bales pressed: 65,792 bales, as of September 2025 Main press force 880 kN Specific pressing force 120 N/cm² Pressing force cutting edges free rammer 120 kN Dimensions of feed chute 970 x 1,800 mm Theoretical cycle time in idle mode 8.3 seconds Theoretical throughput capacity 643 m³/hour Bale dimensions 1,100 x 750 mm, the length is variable 600 up to 2000 mm Drive power 2 x 45 kW frequency-controlled Connected load 98 kW Total current consumption 192 A Fuse protection 250 A slow-blow 5-fold horizontal tying, fully automatic Throughput rates with a bulk density of 20 kg/cbm 12.86 t/hour Bulk weight of 50 kg/cbm 32.15 t/hour Bale weights with a bale length of approx. 1.2 m 650 up to 750 kg/bale, depends on materiel Hydraulic oil tank capacity 2000 litres PLC control Siemens S7-300 Siemens TP 700 control panel Press dimensions assembled 18,000 x 4,300 x 3.270 mm (l x w x h) Press dimensions with conveyor system 18,000 x 22,000 x 5,765 mm (l x w x h) Transport weight baler approx 30 t (Main press approx. 20 t, press channel with bale clamp approx. 10 t) Special machine equipment: Access locking by means of key transfer system Electro-hydraulic locking of the press carriage during the tying process so that the press plunger does not change position with highly expansive materials Additional optional equipment ordered: Frequency-controlled main drive, 2 x 45 kW, with up to 40 % energy savings compared to the standard motorisation 2 x 45 kW, with the same power output Manual switch-off or switch-on of the number of strapping wires to save on strapping wire for non-expansive material Cutting-edge frei rammer with 121 kN pressing force Sensory wire monitoring, with press switch-off in the event of wire breakage or wire end Bale chute Visual warning signal, mounted on the control cabinet Condition of the baler: The entire baling system (baler and conveyor belt) is in good, operational condition. Technical data for the chain belt conveyor: Manufacturer Stadler Anlagenbau GmbH Typ chain belt conveyor KF 1800 Year of construction 2012 Drive power 7.5 kW Belt speed 0.05 – 0.4 m/second Length of feeding conveyor 6,000 mm Height of side wall from feeding conveyor 400 mm Length of incline conveyor 9,000 mm Height of side wall from incline conveyor 800 mm Length of gooseneck 1,500 mm Itsdjxcngnopfx Adwjb Incline 30° Nominal width 1,800 mm Useful width 1,700 mm Belt quality EP-500/4 Steel cleats on the rubber belt 50 x 50 mm Hollow pin chain, pitch 125 mm, rollers 36 mm Height of drive axle above ground 4,284 mm Overall height of conveyor belt 5,765 mm Transport dimensions of feeding conveyor approx. 7,000 x 2,200 x 1,250 mm (l x w x h) Transport dimensions of the incline conveyor 13,000 x 2,500 x 2,900 mm (l x w x h) Pit dimensions for the conveyor belt 14,765 x 3,260 x 1,250 (l x w x h) Scope of delivery: The conveyor belt, baling press with bale chute, and wire drawing stations are available for sale, but without the wire. Comments: The documentation (Manual, CE-declaration, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: refurbished (used), NIMO-KG SKV 200 MK Iedpfxjhua Hdo Adwjtb ID.NO. 2196 Nimo-KG SKV 200 MK trolley lift for 200 liter trolleys. Dimensions 110 x 130 cm Height 480 cm Tipping height 380 cm.

Condition: excellent (used), NIMO-KG SK 800 MK ID.NO. 2467 Nimo-KG mod SK 800 MK pallantainer / Bigbox lift. Max dimensions for Pallantainer / steak box 127 x 102 cm H 82 cm. Tip height 185 cm. Itjdpfjiz Aw Eox Adwob Dimensions W 170 D 130 cm H 315 cm.

Condition: as good as new (ex-display), NIMO-KG ID.NO. 2484 Nimo-KG side trolley lift with associated protective cage. Very nice condition! Iodpfx Adski Txgjwotb Dimensions 120 x 130 H 395 cm Tip height 340 cm

Condition: like new (used), Year of construction: 2016, functionality: fully functional, NIMO-KG SK 800 HA2 ID.NO. 2736 Ijdpou Nmb Ssfx Adwotb Nimo-KG SK 800 HA2 bigbox / pallantainer lift year mod 2016. Max container dimensions D 130 W 115 cm Height 95 cm. Tipping height max 130 cm. Dimensions 200 x 190 cm Height 200 cm.

Year of construction: 2002, condition: refurbished (used), NIMO-KG Isdpfx Aofigxtedwjtb ID.NO. 1767 Nimo-KG in very good condition built-in mettler Toledo scale cells space for 4x sideboards + 1 sideboard in the middle. Completely in stainless steel hydraulic pistons.

Condition: excellent (used), NIMO-KG SKV200 MK ID.NO. 2470 Nimo-KG SKV 200 MK meatbin lifter for 200 liter meatbins. Dimensions W 130 D 120 cm Total height 400 cm. Itsdpfsiz Awwjx Adwsb Tip height 302 cm.

Condition: used, Year of construction: 2015, Recycling system for recovering and separating plastic and rubber products from textile reinforcements, such as various types of rubber hoses, PVC, tarpaulins, banners and other plastic materials in which textile reinforcement occurs. The system cooperates with a granulation group and a separation system. Itjdpfx Aewpkw Eodweb Hourly capacity: 50 - 80 kg/h Infeed dimensions: 270 x 120 mm + fi 80 mm Blade length: 3x2 + 2x2 Rotor diameter: 250 mm Cutting length: 600 mm Engine power: 22 kW Dimensions: 3200 x 3000 mm Height: 2500 mm Weight: 1000 kg Year of production: 2015 Technical condition: used machine, all engines in working order. No top cap with dimensions: 400x300 mm used for loading the product. Full and original technical documentation available. .

Condition: used, Year of construction: 1991, consisting of: -SIGMATHERM plate heat exchanger (heat exchange surface 21.5 m2) - Forerun tank 1200 l - Hilge product pump with manual control valve - Hilge hot water circulation pump - 500 l expansion tank - Shell-and-tube heat exchanger - Compressed air reduction station -Control cabinet with operating panel Additional title: juice heating plant for pasteurization Capacity: 100 hl/h Perm. working overpressure: 16 bar test pressure 20,8 bar Iodevcqy Uopfx Adwstb Wärmeaustauschfläche: 21 m2 Length: 5,6 m Width: 2 m Height: 2,4 m Operation / Control: Control cabinet with operating buttons Material: Stainless steel Base construction: Frame Features: 2 x vessels; plate heat exchanger; pipe heat exchanger; 2 x product pumps; process measuring and control technology. various valves and other fittings

Condition: good (used), Year of construction: 2008, machine/vehicle number: 34/30, total width: 2,840 mm, total length: 9,000 mm, total height: 5,950 mm, Device for gasification, gas afterburning, extraction system. Total value of electrical connection 90 KVR. Operating voltage 400/230V 50Hz. Control voltage 230V AC, control voltage 24V DC. Device dimensions: length 9000mm, width 2840mm, height 5955mm. Iodpeh Nyczsfx Adwjtb

Condition: new, TECHNICAL DATA: - Base area: 15,000 x 24,000 mm [other variants available] - Grid spacing: 5,000 x 6,000 mm - Top edge of floor covering: 3,340 mm - Clear height: 3,000 mm - Flooring: 38 mm chipboard P6, raw/white - Load capacity: 500 kg - Colour: RAL color of your choice - Condition: new The platforms can be expanded in the specified grid as standard. Other sizes and heights are available on request. Our team is happy to advise you! Scope of delivery: - Columns - Main and secondary beams - Bracing cross-members - Flooring - Fastening material PRICES: Variant I: Base area: 30 m² | Dimensions: 5,000 x 6,000 mm | €4,499.65 net, plus transport costs and VAT. Variant II: Base area: 60 m² | Dimensions: 5,000 x 12,000 mm | €7,393.50 net, plus transport costs and VAT. Variant III: Base area: 90 m² | Dimensions: 5,000 x 18,000 mm | €7,303.60 net, plus transport costs and VAT. Variant IV: Base area: 120 m² | Dimensions: 5,000 x 24,000 mm | €10,513.84 net, plus transport costs and VAT. Variant V: Base area: 60 m² | Dimensions: 10,000 x 6,000 mm | €13,707.36 net, plus transport costs and VAT. Variant VI: Base area: 180 m² | Dimensions: 10,000 x 18,000 mm | €19,027.30 net, plus transport costs and VAT. Variant VII: Base area: 240 m² | Dimensions: 10,000 x 24,000 mm | €25,003.69 net, plus transport costs and VAT. Additional configurations available. Optional accessories: - Railing - Flush wall connection - Staircase Isdpfx Aexpiztodwjtb - Transfer station - Impact protection YOUR CONTACT PERSONS AT OUR COMPANY: - Tanja Henkelmann - Rainer Nürenberg - Oliver Kopp ⚙️ CUSTOM DESIGN & MANUFACTURING This platform system is an example from our standard range. Of course, we develop and manufacture your warehouse platform exactly according to your operational requirements – tailored to area, load-bearing capacity, platform height, and intended application. Our planning department will prepare a custom, non-binding offer for you based on your specifications. Whether new construction, extension, or modernization of existing systems – we support you with expert knowledge and practical solutions. TRANSPORT & INSTALLATION We are happy to assist you with transport and installation of the goods. This item is available for collection. Delivery or shipment is available at an additional cost. The extra costs depend on the place of delivery and the size of the consignment, and can be specified individually on request. PAYMENT TERMS Payment terms will be agreed upon when placing the order. The price is to be understood as unit/net price or as stated in the description (plus VAT). You will of course receive an invoice showing VAT. ABOUT US The company DLK, located in Nordhorn, deals in new and used products for warehousing logistics, conveying technology, mezzanine floors, textile storage solutions, as well as in machinery for commerce, industry, and craft trades. We constantly offer attractive used machines from various manufacturers/brands at competitive terms. If you have any questions, please feel free to contact us at any time. ✅ Four wins – The success factors of DLK – Warehouse Technology | Levelmaker® | Logistics | Solutions

Condition: new, TECHNICAL DATA: - Footprint: 15,000 x 24,000 mm [other variants available] - Grid: 5,000 x 6,000 mm - Top edge of flooring: 3,340 mm - Clear height: 3,000 mm - Flooring: 38 mm particle board (P6 raw/white) - Load capacity: 350 kg - Colour: RAL of your choice - Condition: new The platforms are expandable in the specified grid as standard. Other sizes and heights available on request. Our team will be happy to advise you! Delivery scope: - Columns - Primary and secondary beams - Bracing crossbars - Flooring panels - Fastening materials PRICES: Iodpoxpizaefx Adwotb Variant I: Footprint: 30 m² | Area: 5,000 x 6,000 mm | €3,598.65 net, plus transport costs and VAT. Variant II: Footprint: 60 m² | Area: 5,000 x 12,000 mm | €6,418.50 net, plus transport costs and VAT. Variant III: Footprint: 60 m² | Area: 10,000 x 6,000 mm | €6,423.45 net, plus transport costs and VAT. Variant IV: Footprint: 90 m² | Area: 5,000 x 18,000 mm | €9,104.40 net, plus transport costs and VAT. Variant V: Footprint: 120 m² | Area: 5,000 x 24,000 mm | €11,890.80 net, plus transport costs and VAT. Variant VI: Footprint: 180 m² | Area: 10,000 x 18,000 mm | €16,281.60 net, plus transport costs and VAT. Variant VII: Footprint: 240 m² | Area: 10,000 x 24,000 mm | €21,471.36 net, plus transport costs and VAT. Further variants available Optional accessories: - Guardrail - Flush wall connection - Staircase - Transfer station - Collision guard YOUR CONTACT PERSONS: - Tanja Henkelmann - Rainer Nürenberg - Oliver Kopp ⚙️ CUSTOM DESIGN & MANUFACTURING This platform system is an example from our standard range. Of course, we design and manufacture your storage platform exactly according to your requirements – tailored to surface area, load capacity, installation height and intended area of use. Based on your specifications, our design department will prepare an individual, non-binding offer for you. Whether new construction, expansion or modernization of existing systems – we support you with expert know-how and practical solutions. TRANSPORT & INSTALLATION We are happy to assist with the transport and installation of the goods. This item is available for collection. Delivery or shipping is available for an additional charge. Additional costs depend on the delivery location and volume of the shipment and can be quoted individually on request. PAYMENT TERMS Payment terms are to be agreed upon in case of order. The stated price is per unit/net, or as specified in description (plus VAT). You will of course receive an invoice with VAT indicated. ABOUT US The company DLK in Nordhorn deals in new and used products for warehouse logistics, conveyor technology, mezzanine floors, textile storage as well as machines for trade, industry and crafts. We continuously offer interesting used equipment from various manufacturers/brands at attractive conditions. If you have any questions, please do not hesitate to contact us. ✅ Four wins – The building blocks of success at DLK – Storage Technology | Levelmaker® | Logistics | Solutions

Condition: new, TECHNICAL DATA: - Base area: 15,000 x 24,000 mm [other variants available] - Grid: 5,000 x 6,000 mm - Top edge of floor covering: 3,340 mm - Clear height: 3,000 mm - Floor covering: 38 mm chipboard, raw/white, P6 grade - Load capacity: 250 kg - Colour: RAL of your choice - Condition: new The platforms can be extended modularly as per the specified grid. Other sizes and heights available upon request. Our team is happy to advise you! Delivery scope: - Columns - Primary and secondary beams - Bracing crosses - Floor covering - Fastening materials PRICES: Variant I: Base area: 30 m² | Dimensions: 5,000 x 6,000 mm | €3,400.00 net, plus shipping and VAT Variant II: Base area: 60 m² | Dimensions: 5,000 x 12,000 mm | €6,008.00 net, plus shipping and VAT Variant III: Base area: 60 m² | Dimensions: 10,000 x 6,000 mm | €6,043.20 net, plus shipping and VAT Variant IV: Base area: 90 m² | Dimensions: 5,000 x 18,000 mm | €8,512.54 net, plus shipping and VAT Variant V: Base area: 120 m² | Dimensions: 5,000 x 24,000 mm | €11,154.85 net, plus shipping and VAT Variant VI: Base area: 180 m² | Dimensions: 10,000 x 18,000 mm | €15,343.02 net, plus shipping and VAT Variant VII: Base area: 240 m² | Dimensions: 10,000 x 24,000 mm | €20,081.60 net, plus shipping and VAT Additional variants available. Optional accessories: - Guardrail - Flush wall connection - Staircase - Transfer station - Collision protection YOUR CONTACTS AT OUR COMPANY: - Tanja Henkelmann Iodpfx Aoxpil Esdwstb - Rainer Nürenberg - Oliver Kopp ⚙️ CUSTOM PLANNING & MANUFACTURING This platform system is an example from our standard range. Of course, we plan and manufacture your storage platform exactly according to your operational requirements – tailored to area, load capacity, installation height, and intended usage. Our design department will prepare a custom, non-binding quote based on your specifications. Whether you are planning a new installation, an extension, or a modernization of existing equipment, we support you with professional expertise and practical solutions. TRANSPORT & ASSEMBLY We would be pleased to assist you with the transport and installation of the equipment. This item is available for collection. Delivery or shipping is possible at an additional cost. Additional costs depend on the destination and shipment scope and can be provided individually upon request. PAYMENT TERMS Payment terms are agreed upon at the time of order. Prices are per unit/net price unless otherwise specified (plus VAT). You will of course receive an invoice with listed VAT. ABOUT US DLK Nordhorn trades in new and used products for warehouse logistics, conveyor technology, warehouse platforms, textile storage, and machinery for commerce, industry, and the trades. We continuously offer attractive used equipment from various manufacturers/brands at favorable conditions. Please feel free to get in touch with any questions. ✅ Four wins – The success building blocks from DLK – Storage technology | Levelmaker® | Logistics | Solutions

Condition: new, TECHNICAL DATA: - Base area: 20,000 x 15,000 mm [other variants available] - Grid spacing: 5,000 x 5,000 mm - Top edge of floor covering: 3,340 mm - Clear height: 3,000 mm - Floor covering: 38 mm particle board, P6 raw/white - Load capacity: 500 kg - Colour: RAL of your choice - Condition: new The platforms can be expanded in the specified grid as standard. Other sizes and heights available upon request. Our team will be happy to advise you! Scope of delivery: - Columns - Primary and secondary beams - Bracing crosses - Floor panels - Mounting hardware PRICES: Variant I: Base area: 25 m² | Area: 5,000 x 5,000 mm | €3,031.80 net, plus transport costs and VAT Variant II: Base area: 50 m² | Area: 5,000 x 10,000 mm | €5,376.95 net, plus transport costs and VAT Variant III: Base area: 75 m² | Area: 5,000 x 15,000 mm | €7,509.23 net, plus transport costs and VAT Variant IV: Base area: 100 m² | Area: 5,000 x 20,000 mm | €9,780.27 net, plus transport costs and VAT Variant V: Base area: 100 m² | Area: 10,000 x 10,000 mm | €9,485.32 net, plus transport costs and VAT Variant VI: Base area: 150 m² | Area: 10,000 x 15,000 mm | €13,729.96 net, plus transport costs and VAT Variant VII: Base area: 200 m² | Area: 10,000 x 20,000 mm | €17,669.70 net, plus transport costs and VAT Variant VIII: Base area: 300 m² | Area: 20,000 x 15,000 mm | €25,669.35 net, plus transport costs and VAT More variants available Optional accessories: - Guard rail - Flush wall connection - Staircase - Transfer station - Impact protection YOUR CONTACT PERSONS: - Tanja Henkelmann - Rainer Nürenberg - Oliver Kopp Itjdpfx Adjxpii Rjweb ⚙️ CUSTOM PLANNING & MANUFACTURING This platform system is an example from our standard range. Of course, we design and manufacture your mezzanine platform exactly according to your operational requirements – tailored to area, load capacity, construction height, and intended application. Our planning department will prepare a customised, non-binding offer based on your specifications. Whether new construction, expansion, or modernisation of existing systems – we support you with extensive expertise and practical solutions. TRANSPORT & ASSEMBLY We are happy to support you with transport and assembly. This item is available for collection. Delivery or shipping is possible at an additional charge. Additional costs depend on the place of delivery and shipment volume and can be provided individually upon request. PAYMENT TERMS Payment terms are to be agreed upon order placement. Prices are quoted per unit/net price, as stated in the product description (plus VAT). You will of course receive an invoice showing VAT. ABOUT US DLK in Nordhorn specialises in new and used products for warehouse logistics, conveyor technology, mezzanine floors, textile storage systems, as well as machinery for trade, industry and craft businesses. We continuously offer attractive used equipment from various manufacturers/brands at competitive conditions. If you have any questions, please feel free to contact us. ✅ Four to win – The four pillars of success at DLK – Warehouse Technology | Levelmaker® | Logistics | Solutions

Condition: new, TECHNICAL DATA: - Base dimensions: 5,000 x 5,000 mm [other versions available] - Grid: 5,000 x 5,000 mm - Top edge of floor surface: 3,340 mm - Clear height: 3,000 mm - Flooring: 38 mm raw/white chipboard (P6 grade) - Load capacity: 350 kg - Colour: RAL colour of your choice - Condition: new The platforms can be expanded in the specified grid as standard. Other sizes and heights available on request. Our team will be happy to advise you! Scope of delivery: - Columns - Main and secondary beams - Bracing crosses - Flooring - Mounting materials PRICES: Version I: Base area: 25 m² | Dimensions: 5,000 x 5,000 mm | €2,863.50 net, plus shipping and VAT. Version II: Base area: 50 m² | Dimensions: 5,000 x 10,000 mm | €5,040.00 net, plus shipping and VAT. Version III: Base area: 75 m² | Dimensions: 5,000 x 15,000 mm | €7,033.95 net, plus shipping and VAT. Version IV: Base area: 100 m² | Dimensions: 5,000 x 20,000 mm | €9,206.61 net, plus shipping and VAT. Version V: Base area: 100 m² | Dimensions: 10,000 x 20,000 mm | €8,916.48 net, plus shipping and VAT. Version VI: Base area: 150 m² | Dimensions: 5,000 x 5,000 mm | €13,075.20 net, plus shipping and VAT. Version VII: Base area: 200 m² | Dimensions: 10,000 x 20,000 mm | €16,519.56 net, plus shipping and VAT. Version VIII: Base area: 300 m² | Dimensions: 5,000 x 5,000 mm | €24,309.81 net, plus shipping and VAT. Additional versions available Itedsxpic Ropfx Adweb Optional accessories - Guard rails - Flush wall connection - Staircase - Transfer station - Impact protection YOUR CONTACTS AT OUR COMPANY: - Tanja Henkelmann - Rainer Nürenberg - Oliver Kopp TRANSPORT & INSTALLATION We are happy to assist you with transport and installation of the goods. This item is available for collection. Delivery or shipping is available at an additional cost. The extra charges will depend on the delivery location and scope of the shipment and can be provided by us upon request. PAYMENT TERMS Payment terms are agreed upon in the event of an order. All prices are per unit/net price or as stated in the description (plus VAT). You will of course receive an invoice with VAT shown separately. ABOUT US DLK, based in Nordhorn, deals with new and used products in the fields of warehouse logistics, conveyor technology, mezzanine floors, textile storage systems as well as machinery for commerce, industry and crafts. We continuously offer attractive used equipment from various manufacturers/brands at competitive terms. Please contact us with any questions. Four wins – The cornerstones of DLK’s success – Warehouse Technology | Levelmaker® | Logistics | Solutions.

Condition: new, TECHNICAL DATA: - Floor area: 20,000 x 15,000 mm [other variants available] - Grid: 5,000 x 5,000 mm - Top of floor covering: 3,340 mm - Clear height: 3,000 mm - Flooring: Chipboard 38 mm P6 untreated/white - Load capacity: 250 kg - Colour: RAL of your choice - Condition: new The platforms can be extended in the stated grid as standard. Other sizes and heights available on request. Our team will be happy to advise you! Scope of delivery: - Columns - Main and secondary beams - Bracing - Flooring - Fastening materials PRICES: Variant I: Floor area: 25 m² | Dimensions: 5,000 x 5,000 mm | €2,711.50 net, plus shipping and VAT. Variant II: Floor area: 50 m² | Dimensions: 5,000 x 10,000 mm | €4,756.00 net, plus shipping and VAT. Variant III: Floor area: 75 m² | Dimensions: 5,000 x 15,000 mm | €6,659.80 net, plus shipping and VAT. Variant IV: Floor area: 100 m² | Dimensions: 5,000 x 20,000 mm | €8,662.00 net, plus shipping and VAT. Variant V: Floor area: 100 m² | Dimensions: 10,000 x 10,000 mm | €8,381.70 net, plus shipping and VAT. Variant VI: Floor area: 150 m² | Dimensions: 10,000 x 15,000 mm | €12,162.50 net, plus shipping and VAT. Variant VII: Floor area: 200 m² | Dimensions: 10,000 x 20,000 mm | €15,136.80 net, plus shipping and VAT. Variant VIII: Floor area: 300 m² | Dimensions: 20,000 x 15,000 mm | €22,782.72 net, plus shipping and VAT. Further variants available Optional accessories: - Handrail - Flush wall connection - Staircase - Transfer station - Collision protection YOUR CONTACT PERSONS: - Tanja Henkelmann - Rainer Nürenberg - Oliver Kopp ⚙️ CUSTOM PLANNING & MANUFACTURING This platform system is an example from our standard range. Of course, we design and build your mezzanine platform precisely to your operational requirements – adapted to surface area, load capacity, installation height and intended area of use. Our planning department will provide you with a customized, non-binding quotation based on your specifications. Whether new construction, extension or modernization of existing systems – we support you with comprehensive expertise and practical solutions. Iodpexph A Asfx Adwotb TRANSPORT & INSTALLATION We are happy to assist with transport and installation of your goods. This item is available for collection. Delivery or shipping is possible at an extra charge. Additional costs depend on the delivery location and consignment size and can be requested from us on an individual basis. PAYMENT TERMS Payment terms will be agreed upon in case of order. The price is per piece/net price as stated in the description (plus VAT). You will of course receive an invoice with VAT shown separately. ABOUT US The company DLK in Nordhorn trades in new and used products in the areas of warehouse logistics, conveyor technology, mezzanine floors, textile storage as well as machinery for trade, industry and crafts. We continuously offer attractive used equipment from various manufacturers/brands at competitive conditions. Please feel free to contact us with any questions. ✅ Four wins – The success factors of DLK – Warehouse Technology | Levelmaker® | Logistics | Solutions

Condition: new, TECHNICAL DATA: - Base area: 16,000 x 20,000 mm [other sizes available] - Grid: 4,000 x 5,000 mm - Top edge of floor covering: 3,340 mm - Clear height: 3,000 mm - Floor covering: 38 mm particleboard, P6 raw/white - Load capacity: 250 kg - Color: RAL of your choice Iedpfxoxpha Io Adwetb - Condition: new Scope of delivery: - Columns - Main and secondary beams - Bracing crossmembers - Floor covering - Fastening material PRICES: Variant I: Base area: 20 m² | Dimensions: 4,000 x 5,000 mm | €2,137.50 net, plus transport and VAT Variant II: Base area: 40 m² | Dimensions: 4,000 x 10,000 mm | €3,979.30 net, plus transport and VAT Variant III: Base area: 40 m² | Dimensions: 8,000 x 5,000 mm | €3,874.00 net, plus transport and VAT Variant IV: Base area: 60 m² | Dimensions: 4,000 x 15,000 mm | €5,655.36 net, plus transport and VAT Variant V: Base area: 80 m² | Dimensions: 4,000 x 20,000 mm | €7,445.76 net, plus transport and VAT Variant VI: Base area: 80 m² | Dimensions: 8,000 x 10,000 mm | €6,986.24 net, plus transport and VAT Variant VII: Base area: 80 m² | Dimensions: 16,000 x 5,000 mm | €7,061.76 net, plus transport and VAT Variant VIII: Base area: 120 m² | Dimensions: 8,000 x 15,000 mm | €9,930.06 net, plus transport and VAT Variant IX: Base area: 120 m² | Dimensions: 10,000 x 12,000 mm | €9,671.76 net, plus transport and VAT Variant X: Base area: 160 m² | Dimensions: 8,000 x 20,000 mm | €13,063.67 net, plus transport and VAT Variant XI: Base area: 160 m² | Dimensions: 16,000 x 10,000 mm | €12,880.98 net, plus transport and VAT Variant XII: Base area: 240 m² | Dimensions: 16,000 x 15,000 mm | €18,258.52 net, plus transport and VAT Variant XIII: Base area: 320 m² | Dimensions: 16,000 x 20,000 mm | €23,955.92 net, plus transport and VAT Optional accessories: - Railings - Flush wall connection - Staircase - Transfer station - Collision protection YOUR CONTACT PERSONS AT OUR COMPANY: - Tanja Henkelmann - Rainer Nürenberg - Oliver Kopp ⚙️ INDIVIDUAL PLANNING & CUSTOM MANUFACTURING This mezzanine platform is an example from our standard range. Of course, we develop and manufacture your storage mezzanine precisely according to your operational requirements – tailored for area, load capacity, installation height, and the intended field of application. TRANSPORT & INSTALLATION We are happy to assist you with transport and assembly of the goods. This item is available for collection. Delivery or shipping can be arranged for an additional charge. The extra costs depend on the delivery location and the scope of the shipment and can be individually requested from us. TERMS OF PAYMENT Payment terms are to be agreed upon in the event of an order. All prices are quoted as unit price/net price or as specified in the description (plus VAT). You will, of course, receive an invoice with VAT shown separately. ABOUT US DLK, based in Nordhorn, specializes in the trade of new and used products in the areas of warehouse logistics, material handling systems, mezzanine platforms, textile warehouses, as well as machinery for commerce, industry, and trades. ✅ Four factors for success – The building blocks of DLK – Warehouse technology | Levelmaker® | Logistics | Solutions

Condition: new, TECHNICAL DATA: - Base area: 16,000 x 20,000 mm [other versions available] - Grid: 4,000 x 5,000 mm - Finished floor height: 3,340 mm - Clear height: 3,000 mm - Floor covering: chipboard 38 mm P6 raw/white - Load capacity: 250 kg - Colour: RAL of your choice - Condition: new Scope of delivery: - Columns - Main and secondary beams - Bracing crosses - Floor covering - Fastening material PRICES: Variant I: Base area: 20 m² | Dimensions: 4,000 x 5,000 mm | €2,091.60 net, plus transport costs and VAT. Variant II: Base area: 40 m² | Dimensions: 4,000 x 10,000 mm | €3,754.80 net, plus transport costs and VAT. Variant III: Base area: 40 m² | Dimensions: 8,000 x 5,000 mm | €3,591.00 net, plus transport costs and VAT. Variant IV: Base area: 60 m² | Dimensions: 4,000 x 15,000 mm | €5,395.00 net, plus transport costs and VAT. Variant V: Base area: 80 m² | Dimensions: 4,000 x 20,000 mm | €6,825.00 net, plus transport costs and VAT. Variant VI: Base area: 80 m² | Dimensions: 8,000 x 10,000 mm | €6,462.50 net, plus transport costs and VAT. Variant VII: Base area: 80 m² | Dimensions: 16,000 x 5,000 mm | €6,552.50 net, plus transport costs and VAT. Variant VIII: Base area: 120 m² | Dimensions: 8,000 x 15,000 mm | €9,238.00 net, plus transport costs and VAT. Variant IX: Base area: 120 m² | Dimensions: 10,000 x 12,000 mm | €8,785.40 net, plus transport costs and VAT. Variant X: Base area: 160 m² | Dimensions: 8,000 x 20,000 mm | €12,211.52 net, plus transport costs and VAT. Variant XI: Base area: 160 m² | Dimensions: 16,000 x 10,000 mm | €12,040.40 net, plus transport costs and VAT. Variant XII: Base area: 240 m² | Dimensions: 16,000 x 15,000 mm | €17,580.72 net, plus transport costs and VAT. Variant XIII: Base area: 320 m² | Dimensions: 16,000 x 20,000 mm | €23,076.40 net, plus transport costs and VAT. Optional accessories: - Guard rail - Flush wall connection - Staircase - Transfer station - Impact protection YOUR CONTACT PARTNERS AT OUR COMPANY: - Tanja Henkelmann - Rainer Nürenberg - Oliver Kopp Isdpfjxpg Udex Adwstb ⚙️ INDIVIDUAL PLANNING & CUSTOM PRODUCTION This platform system is an example from our standard range. Naturally, we develop and manufacture your mezzanine platform precisely according to your operational requirements – tailored to area, load capacity, installation height and intended application area. TRANSPORT & ASSEMBLY We are happy to assist you with transport and assembly of the goods. This item is available for collection. Delivery or shipping is possible at an additional charge. The extra costs depend on the delivery location and the scope of the shipment and can be inquired from us individually. PAYMENT TERMS Payment terms are to be agreed upon in case of an order. The price is per unit/net price, or as stated in the description (plus VAT). You will of course receive an invoice detailing VAT. ABOUT US DLK, based in Nordhorn, deals in new and used products in the fields of warehouse logistics, conveyor technology, mezzanine platforms, textile storage, as well as machinery for trade, industry, and the skilled trades. ✅ Four to win – The building blocks of success at DLK – Storage technology | Levelmaker® | Logistics | Solutions

Condition: new, TECHNICAL DATA: - Base area: 16,000 x 20,000 mm [other options available] - Grid: 4,000 x 5,000 mm - Top edge of floor covering: 3,340 mm - Clear height: 3,000 mm - Floor covering: 38 mm chipboard, P6 raw/white - Load capacity: 250 kg - Colour: RAL of your choice - Condition: new Scope of delivery: - Supports - Main and secondary beams - Cross bracing - Floor decking - Fastening materials PRICES: Variant I: Base area: 20 m² | Area: 4,000 x 5,000 mm | €2,013.00 net, plus shipping and VAT Variant II: Base area: 40 m² | Area: 4,000 x 10,000 mm | €3,531.90 net, plus shipping and VAT Variant III: Base area: 40 m² | Area: 8,000 x 5,000 mm | €3,448.94 net, plus shipping and VAT Variant IV: Base area: 60 m² | Area: 4,000 x 15,000 mm | €5,047.20 net, plus shipping and VAT Variant V: Base area: 80 m² | Area: 4,000 x 20,000 mm | €6,588.00 net, plus shipping and VAT Variant VI: Base area: 80 m² | Area: 8,000 x 10,000 mm | €6,092.40 net, plus shipping and VAT Variant VII: Base area: 80 m² | Area: 16,000 x 5,000 mm | €6,234.00 net, plus shipping and VAT Variant VIII: Base area: 120 m² | Area: 8,000 x 15,000 mm | €8,676.54 net, plus shipping and VAT Variant IX: Base area: 120 m² | Area: 10,000 x 12,000 mm | €8,092.44 net, plus shipping and VAT Variant X: Base area: 160 m² | Area: 8,000 x 20,000 mm | €11,509.72 net, plus shipping and VAT Variant XI: Base area: 160 m² | Area: 16,000 x 10,000 mm | €11,349.24 net, plus shipping and VAT Variant XII: Base area: 240 m² | Area: 16,000 x 15,000 mm | €16,426.80 net, plus shipping and VAT Variant XIII: Base area: 320 m² | Area: 16,000 x 20,000 mm | €21,339.63 net, plus shipping and VAT Other configurations available. Optional accessories: - Guardrails - Flush wall connection - Staircase Itjdpfx Adjxpg R Sjwjb - Transfer station - Impact protection ⚙️ CUSTOM DESIGN & MANUFACTURING This mezzanine system is just an example from our standard product range. We will of course develop and manufacture your warehouse mezzanine precisely according to your operational requirements – tailored to area, load capacity, installation height, and intended application. TRANSPORT & INSTALLATION We are happy to assist with transport and installation of the goods. This item is available for collection. Delivery or shipping is available at an additional charge. The extra costs depend on the delivery location and shipment volume, and can be inquired individually. PAYMENT TERMS Payment terms are to be agreed upon when placing the order. The price is a unit/net price or as specified in the description (plus VAT). Naturally, you will receive an invoice with VAT shown separately. ✅ Four advantages – The success factors of DLK – Warehouse technology | Levelmaker® | Logistics | Solutions

Year of construction: 1992, condition: used, Plate heat exchanger for milk processing Itodoh Eulgopfx Adweb

Condition: excellent (used), functionality: fully functional, Technical data for the document shredding system: Manufacturer HSM GmbH + Co KG General data for the two-stage shredder system: Type Duo Shredder 5750 Year of manufacture 2015 Operating hours 3,093 hours Throughput capacity up to 800 kg/hour, depending on material Rated power 30 kW Rated current 62 A Particle cutting size 6 x 40 - 53 mm Fuse protection 63 A gG/gL/C/K Weight of shredder approx. 2500 kg Iedpfx Aswrybrsdwotb Data on the pre-shredder: Shredder type V 570 Working width of the cutting unit 500 mm Particle size 20 x 155 mm (w x l) Nominal power of pre-shredder 2 x 5.5 kW Nominal current of pre-shredder 2 x 11.5 A Data on the secondary shredder: Shredder type P 500.2 Working width of the cutting unit 500 mm Particle size 6 x 40 – 53 mm (w x l) Nominal power of secondary shredder 9.2 kW Nominal current of secondary shredder 18 A Security level according to DIN 66399 P-3, O-2, T-3, E-2 Baling press data: Type KP 100.1 Year of manufacture 2015 Operating hours 2,377 hours Pressing force 9 - 12 t Bale weight 40 – 150 kg/bale, depending on material Cycle time 7–16 seconds Feed chute dimensions 450 x 580 mm Bale size 630 x 500 x 400-1000 mm (w x h x l) Triple horizontal binding Press dimensions 3990 x 2225 x 1735 mm (l x w x h) Weight of press approx. 1000 kg Dimensions of entire system, conveyor belt, shredder and press: 9560 x 2071 x 3550 mm (l x w x h) Function description: This is a complete system consisting of a feed conveyor belt, a two-stage shredder and a horizontal baling pres. The material is fed onto the conveyor belt, shredded in two stages and then pressed into stackable bales. A second cutting unit and various motors are available as spare parts for the system. Comments: The documentation (Manual, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Year of construction: 2019, condition: ready for operation (used), A mixing vessel KG Bremen and two stirrers PRG and IKA are available. 1) Mixing vessel KG Bremen, year of manufacture: 2019, max. operating pressure: atmospheric, max. operating temperature: 80°C, volume: 1150L, max. double-jacket operating overpressure: 5bar, max. double-jacket operating temperature: 80°C, material: 1.4301. 2) Precision stirrer PRG R112M-6, year of manufacture: 2004, agitator length: 930mm, impeller diameter: 160mm. 3) Precision stirrer IKA RF 04-T-1085, year of manufacture: 1999, total length: 1100mm, impeller diameter 1/2: 160mm/200mm. An on-site inspection is possible. Ijdpjxhntrofx Adwstb

Condition: new, TECHNICAL DATA: - Base area: 4,000 x 5,000 mm [other options available] - Grid: 4,000 x 5,000 mm - Top edge of flooring: 3,340 mm - Clear internal height: 3,000 mm - Flooring: 38 mm chipboard, P6 raw/white - Load capacity: 250 kg Isdpoxmkwwsfx Adwotb - Colour: RAL of your choice - Condition: new Scope of delivery: - Columns - Primary and secondary beams - Bracing cross members - Flooring - Fastening material PRICES: Variant I: Base area: 20 m² | Size: 4,000 x 5,000 mm | €2,137.50 net, plus transport costs and VAT Variant II: Base area: 40 m² | Size: 4,000 x 10,000 mm | €3,979.30 net, plus transport costs and VAT Variant III: Base area: 40 m² | Size: 8,000 x 5,000 mm | €3,874.00 net, plus transport costs and VAT Variant IV: Base area: 60 m² | Size: 4,000 x 15,000 mm | €5,655.36 net, plus transport costs and VAT Variant V: Base area: 80 m² | Size: 4,000 x 20,000 mm | €7,445.76 net, plus transport costs and VAT Variant VI: Base area: 80 m² | Size: 8,000 x 10,000 mm | €6,986.24 net, plus transport costs and VAT Variant VII: Base area: 80 m² | Size: 16,000 x 5,000 mm | €7,061.76 net, plus transport costs and VAT Variant VIII: Base area: 120 m² | Size: 8,000 x 15,000 mm | €9,930.06 net, plus transport costs and VAT Variant IX: Base area: 120 m² | Size: 10,000 x 12,000 mm | €9,671.76 net, plus transport costs and VAT Variant X: Base area: 160 m² | Size: 8,000 x 20,000 mm | €13,063.67 net, plus transport costs and VAT Variant XI: Base area: 160 m² | Size: 16,000 x 10,000 mm | €12,880.98 net, plus transport costs and VAT Variant XII: Base area: 240 m² | Size: 16,000 x 15,000 mm | €18,258.52 net, plus transport costs and VAT Variant XIII: Base area: 320 m² | Size: 16,000 x 20,000 mm | €23,955.92 net, plus transport costs and VAT Optional accessories: - Guard railing - Flush wall connection - Staircase - Transfer station - Collision protection YOUR CONTACTS AT OUR COMPANY: - Tanja Henkelmann - Rainer Nürenberg - Oliver Kopp ⚙️ CUSTOMIZED DESIGN & MANUFACTURING This mezzanine system is an example from our standard range. Of course, we can design and manufacture your warehouse mezzanine exactly to your operational requirements – tailored to surface area, load capacity, installation height, and intended application. TRANSPORT & INSTALLATION We will gladly assist you with the transport and installation of the item. This product is available for collection. Delivery or shipping is available at an additional cost. The extra charges depend on the delivery location and shipment size; please contact us for an individual quote. TERMS OF PAYMENT Payment terms are to be agreed upon in the event of an order. All prices are per item/net, as specified in the description (plus VAT). You will, of course, receive an invoice showing VAT separately. ABOUT US The company DLK in Nordhorn deals with new and used products in the fields of warehouse logistics, conveyor technology, mezzanine floors, textile storage, as well as machinery for trade, industry, and craftsmanship. ✅ Four successes – The four cornerstones of DLK – Warehouse Technology | Levelmaker® | Logistics | Solutions

Condition: new, TECHNICAL DATA: - Base area: 4,000 x 5,000 mm [other configurations available] - Grid: 4,000 x 5,000 mm - Top edge of floor covering: 3,340 mm - Clear height: 3,000 mm - Floor covering: 38 mm chipboard P6 raw/white - Load capacity: 250 kg - Colour: RAL of your choice - Condition: new Scope of delivery: - Columns/supports - Main and secondary beams - Bracing crosses - Floor covering - Fastening material PRICES: Variant I: Base area: 20 m² | Dimensions: 4,000 x 5,000 mm | €2,091.60 net, plus transport costs and VAT Variant II: Base area: 40 m² | Dimensions: 4,000 x 10,000 mm | €3,754.80 net, plus transport costs and VAT Variant III: Base area: 40 m² | Dimensions: 8,000 x 5,000 mm | €3,591.00 net, plus transport costs and VAT Variant IV: Base area: 60 m² | Dimensions: 4,000 x 15,000 mm | €5,395.00 net, plus transport costs and VAT Variant V: Base area: 80 m² | Dimensions: 4,000 x 20,000 mm | €6,825.00 net, plus transport costs and VAT Variant VI: Base area: 80 m² | Dimensions: 8,000 x 10,000 mm | €6,462.50 net, plus transport costs and VAT Variant VII: Base area: 80 m² | Dimensions: 16,000 x 5,000 mm | €6,552.50 net, plus transport costs and VAT Variant VIII: Base area: 120 m² | Dimensions: 8,000 x 15,000 mm | €9,238.00 net, plus transport costs and VAT Variant IX: Base area: 120 m² | Dimensions: 10,000 x 12,000 mm | €8,785.40 net, plus transport costs and VAT Variant X: Base area: 160 m² | Dimensions: 8,000 x 20,000 mm | €12,211.52 net, plus transport costs and VAT Variant XI: Base area: 160 m² | Dimensions: 16,000 x 10,000 mm | €12,040.40 net, plus transport costs and VAT Variant XII: Base area: 240 m² | Dimensions: 16,000 x 15,000 mm | €17,580.72 net, plus transport costs and VAT Variant XIII: Base area: 320 m² | Dimensions: 16,000 x 20,000 mm | €23,076.40 net, plus transport costs and VAT Optional accessories: - Railing - Flush wall connection - Staircase - Transfer station - Impact protection YOUR CONTACTS AT OUR COMPANY: - Tanja Henkelmann - Rainer Nürenberg - Oliver Kopp ⚙️ CUSTOM DESIGN & MANUFACTURE TO YOUR SPECIFICATIONS This platform system is an example from our standard range. Of course, we also design and manufacture your storage platform precisely to your operational requirements – tailored to area, load capacity, installation height, and intended use. TRANSPORT & INSTALLATION We are pleased to assist you with transport and assembly. This item is available for collection. Delivery or shipping is available for an additional charge. Extra costs depend on the destination and scope of the shipment and can be individually requested from us. PAYMENT TERMS Payment terms are to be agreed upon in case of an order. The price is given per unit/net price or as described in the text (plus VAT). You will, of course, receive an invoice showing VAT. Iedpfxsxmku Nj Adwjtb ABOUT US DLK in Nordhorn deals in new and used products in the areas of warehouse logistics, conveyor technology, warehouse platforms, textile storage, as well as machinery for trade, industry, and crafts. ✅ Four wins – the success building blocks of DLK – Warehouse Technology | Levelmaker® | Logistics | Solutions

Condition: new, TECHNICAL DATA: - Footprint: 4,000 x 5,000 mm [other versions available] - Grid dimensions: 4,000 x 5,000 mm - Top edge of floor: 3,340 mm - Clear height: 3,000 mm - Floor covering: 38 mm P6 chipboard, untreated/white - Load capacity: 250 kg - Colour: RAL of your choice - Condition: new Scope of delivery: - Columns - Primary and secondary beams - Bracing crosses - Floor panels - Fastening material PRICES: Variant I: Footprint: 20 m² | Area: 4,000 x 5,000 mm | €2,013.00 net, plus transport costs and VAT. Variant II: Footprint: 40 m² | Area: 4,000 x 10,000 mm | €3,531.90 net, plus transport costs and VAT. Variant III: Footprint: 40 m² | Area: 8,000 x 5,000 mm | €3,448.94 net, plus transport costs and VAT. Variant IV: Footprint: 60 m² | Area: 4,000 x 15,000 mm | €5,047.20 net, plus transport costs and VAT. Variant V: Footprint: 80 m² | Area: 4,000 x 20,000 mm | €6,588.00 net, plus transport costs and VAT. Variant VI: Footprint: 80 m² | Area: 8,000 x 10,000 mm | €6,092.40 net, plus transport costs and VAT. Variant VII: Footprint: 80 m² | Area: 16,000 x 5,000 mm | €6,234.00 net, plus transport costs and VAT. Variant VIII: Footprint: 120 m² | Area: 8,000 x 15,000 mm | €8,676.54 net, plus transport costs and VAT. Variant IX: Footprint: 120 m² | Area: 10,000 x 12,000 mm | €8,092.44 net, plus transport costs and VAT. Variant X: Footprint: 160 m² | Area: 8,000 x 20,000 mm | €11,509.72 net, plus transport costs and VAT. Variant XI: Footprint: 160 m² | Area: 16,000 x 10,000 mm | €11,349.24 net, plus transport costs and VAT. Variant XII: Footprint: 240 m² | Area: 16,000 x 15,000 mm | €16,426.80 net, plus transport costs and VAT. Variant XIII: Footprint: 320 m² | Area: 16,000 x 20,000 mm | €21,339.63 net, plus transport costs and VAT. Further versions available. Optional accessories: - Safety railings - Flush wall connection - Staircase - Transfer platform - Collision protection ⚙️ CUSTOM DESIGN & MANUFACTURING This mezzanine system is an example from our standard range. Of course, we design and manufacture your storage platform precisely according to your operational requirements – tailored to area, load capacity, construction height and intended area of use. TRANSPORT & ASSEMBLY We would be glad to assist you with the transport and assembly of the goods. This item is available for collection. Delivery or shipment can be arranged at an additional cost. These costs depend on the delivery location and shipment volume and can be individually requested from us. PAYMENT TERMS Payment terms will be coordinated upon order placement. Price refers to unit price/net price, or as stated in the description (plus VAT). You will, of course, receive an invoice with VAT shown. Isdpfx Adjxmkuiswotb ✅ Four winning factors – The success components of DLK – Warehouse Technology | Levelmaker® | Logistics | Solutions