Used Albert Goecker Kg for sale (65,625)

Condition: new, Year of construction: 2025, PROFILE BENDING ATTACHMENT PB20 Bsdpenh R Ekefx Afhscu The PB20 profile bending attachment is the optimal supplement for tube bending on the 3000 and 6000 models. The device can be easily and quickly mounted on the bending shaft without the use of tools. The workpiece is clamped onto the turntable with the clamping device and pulled around the bending tool. With this system, leg lengths to be bent can be accurately measured in conjunction with a length stop and can be bent with repeatable accuracy. TECHNICAL DATA: - Bending capacity steel 37: 100 x 10 mm, Ø 20 mm. - Many standard tools available - Special tools possible - Sharp-edged tools with bending radius R2 or 5 mm - round tools R 10 to 25 mm for bends max. 260° optional OUR SERVICE: - Welcome to the test production in our house in the demo room - Consultation and information meeting at your site - Consultation and handling as leasing/financing purchase via the company JUTEC - Service contracts, maintenance at your site

Condition: new, Year of construction: 2025, the mobile bending machine with great performance: The compact, mobile design enables precise and repeatable bending stationary and directly at the installation site up to a tube diameter of 35 mm, CU 42 mm. Bodpfx Aenfvx Nsfhocu A powerful three-phase motor and a precision gearbox provide powerful drive. The motor speed is automatically adjusted, resulting in increased return speed and shorter cycle times. Optimum bending accuracy and very high repeatability are achieved by position detection directly on the bending axis. The bending angle is easily and quickly set to 0.5° using pushbuttons. The large LCD display clearly shows the angles. The storage of up to three bending angles enables the rational bending of tubes with different bending results. For transport, the compact unit with accessories can be neatly and safely stored in sturdy transport cases. The "upright tube and rotating tool" principle ensures low space requirements during bending. Sliding shoes are used for thin-walled tubes to enable crease-free bending and to bend bends with the slightest deformations from, for example, stainless steel and copper tubes. With the PB20 profile bending attachment, flat, square and round iron can be bent without problems. POSSIBLE APPLICATIONS: - Hydraulic piping - Sample construction - Sanitary and heating construction - Technical data: - Bending capacity Ø 6 to 35 mm, CU Ø 42 mm depending on material. - Bending radius min/max: 36 mm/150 mm - Precise digital bending angle adjustment 0.5°. - Maximum 180º bending result; for special applications Endless operation possible - Hexagonal shaft 40 mm for quick tool change - Safety foot switch with emergency stop function - Alternating current 230 V connection - Weight 29 kg - Frequency converter and three-phase motor - 3 bending angles storable OPTIONAL ACCESSORIES: - Slide shoe holder - double roller holder - Profile bender PB20 - for bending flat and square bars up to max. 80 x 8 mm, round bars up to max. 20 mm - tripod base - machine case - tool case - Small bending device KBV - Special tool according to specification OUR SERVICE: - Welcome to the test production in our house in the demo room - Consultation and information meeting at your site - Consultation and handling as leasing/financing purchase via the company JUTEC - Service contracts, maintenance at your site

Condition: new, Year of construction: 2025, machine/vehicle number: 1018, THE POWERFUL BENDING MACHINE FOR EXTREME USE: The compact bending machine enables precise and repeatable bending up to an outer diameter of 100 mm stationary and directly at the assembly site. Transport is possible with lift trucks or the optional rollers. A powerful three-phase motor and a precision gearbox provide a powerful drive. The machine convinces with its compact and slim design as well as the very free bending range. Optimum bending accuracy is achieved by position detection directly on the bending axis. The bending angle is set easily and quickly via a convenient and menu-driven user interface in 14 languages with touchscreen control, which guarantees even more intuitive operation. For more complex bending tasks, 100 bending programs can be stored, with an angle sequence of max. 8 bends per geometry. The multifunction control allows variable adjustment of the bending speed for forward and backward travel, and a parameterizable overbending function is provided to compensate for material springback.With the help of the four material characteristics, the material is automatically overbent to the required bending angle, thus realizing an exact bending result. The principle of "stationary tube and rotating tool" ensures low space requirements during bending. Sliding shoes are used for thin-walled tubes to achieve a wrinkle-free bending result and to bend bends with minimal deformations from e.g. stainless steel and copper tubes. With the profile bending attachment PB20 flat, square and round bars can be bent without any problems. Extremely small bending radii are made possible with the KBV small bending attachment. POSSIBLE AREAS OF APPLICATION: - Plant engineering - Hydraulic piping - Meander bending - prototyping - Sanitary and heating engineering - shipbuilding TECHNICAL DATA 10000: Bending capacity: up to 100 x 5 mm, 55 mm solid material three-phase current 400 V - Bending radius up to 500 mm - Multifunctional machine control Bending angle adjustment (0,1°) - Maximum bending angle 240 - Safety foot switch with emergency stop - Weight 600 kg OPTIONAL ACCESSORIES: - Adapter system for tools from model series 3000/6000 with bending radius from 45 mm, incl. hexagonal shaft 40 mm - Profile bender PB20 - for bending flat and square bars up to max. 100 x 10 mm, round bars up to max. 20 mm - Small bending device KBV - Special tools according to specification - Software adaptations for special tasks OUR SERVICE: Bedpfxsndk N Ae Afhecu - Welcome to the test production in our house in the demo room - Consultation and information meeting at your site - Consultation and handling as leasing/financing-purchase via the company JUTEC - Service contracts, maintenance at your site

Condition: new, Year of construction: 2025, machine/vehicle number: 1018, THE MANDREL BENDER WITH MANUEL CLAMPING: This mandrel bending machine with manual eccentric quick clamping for tube fixing enables rational bending. The compact drive unit with the detachable mandrel carrier offers advantages when used at the assembly site. Optimum bending accuracy is achieved by position detection directly on the bending axis. The bending angle is set easily and quickly via a convenient touchscreen control with menu-driven user interface. The comfort control allows two speeds as well as a parameterizable overbending function to compensate for material springback. The bending sequence is significantly shortened by automatic "free travel" at the end of the sheet. For more complex bending tasks, bending programs can be stored with a maximum angle sequence of 50 bends per geometry. An almost unlimited number of programs can be stored on the control or a USB stick, as well as 200 materials. The plug-in bending tools allow rapid conversion to other tube sizes. For difficult geometries, the bending direction of the machine can be changed to right or left bending as standard. The open bending unit allows, for example, the bending of railing frames with only one weld seam. The optional calculation software on the PC determines the cut length for the entire geometry as well as the travel distance, twisting angle and bending angle for each bend. The mandrel retraction is programmable and can be retracted automatically ahead of time when a bending angle is reached. POSSIBLE APPLICATIONS: - Plant engineering, e.g. chemical industry - hydraulic piping - prototyping - Pipeline construction TECHNICAL DATA: - Bending capacity Ø 6 to 50 mm - bending radius min/max: 10 mm/140 mm - Bending radii 2 x D - multifunction machine control bending angle adjustment (0,1°) - mandrel beam lengths 1500/3000/4500/ 6000 mm (special version also longer) - Maximum 180º bending result - Weight 300-500 kg (depending on version) Bcjdpfx Afjnfvy Uehsu Optional accessories: - Automatic mandrel lubrication (minimum quantity) - Digital displacement measurement for length and twist (resolution 0.1 OUR SERVICE: - Welcome to the test production in our house in the demo room - Consultation and information meeting at your site - Consultation and handling as leasing/financing-purchase via the company JUTEC - Service contracts, maintenance at your site

Condition: new, Year of construction: 2025, THE PRACTICAL HAND BENDING DEVICE: The compact, mobile design allows precise and repeatable bending in the vice. Drive is provided by a screw-in handle. A lockable adjusting ring ensures repeatable bending. The exchange of the plug-in tools is conceivably simple. The principle of "stationary tube and rotating tool" allows bending with the smallest possible footprint. For thin-walled tubes, sliding shoes are used for crease-free bending in order to produce bends with the least possible deformation from, for example, stainless steel and copper tubes. The optional version with a hexagonal mount allows the drive force of the 3000 and 6000 bending systems to be used in addition to the vise. For this purpose, the KBV is simply placed on the bending shaft of the machine. POSSIBLE APPLICATIONS: - Hydraulic piping - prototype construction - Sanitary and heating construction TECHNICAL DATA: - Bending capacity Ø 6 to 18 mm - Manual bending angle limitation - Maximum 180º bending result Bcodeng Amkopfx Afhsu OPTIONAL ACCESSORIES: - KBV with hexagonal fixture for bending on model 3000 or 6000 - Machine case - Length stop OUR SERVICE FOR YOU ON SITE: - Welcome to the test production in our house in the demo room - Consultation and information meeting at your site - Consultation and handling as leasing/financing purchase via the company JUTEC - Service contracts, maintenance at your site

Condition: new, Year of construction: 2025, THE PRECISION 3-ROLL BENDING MACHINE When developing the compact and mobile horizontal bending machine, the focus was clearly set on the production of dimensionally accurate coils such as handrails for spiral staircases. This is the supreme discipline, since two mutually influencing variables (radius and pitch) must be combined in a bend to form a dimensionally accurate geometry. The interaction of tube calculation on the PC, implementation on the bending machine, and control via the measuring equipment with final correction of the bending values ensure accurate bending. By simple and few inputs into the PC tube calculation program, the local printer provides a printout and supports the calculation of all necessary bending and correction data to operate the machine. A new powerful drive concept allows infinitely variable adjustment of the bending speed, requiring only a 230 V (AC) connection. Hardened steel tools as well as hard plastic tools that are gentle on the surface are available for selection. To ensure optimum feed even with tight bending radii, all three bending shafts are driven. The drive concept also proves its worth in tough daily use on the flat, when bending tubes and profiles. Customers of the 4800, 5000 and 6000 bending system have the option of purchasing the roller bending unit without the drive. The roller bending unit with the designation RB43, can be adapted to the bending systems 4800, 5000 and 6000 via the bending shaft. In this case, the machines act as a drive unit. POSSIBLE APPLICATIONS: - Handrails/bottom rails for spiral staircases - Large tubular profile bends - General metal construction TECHNICAL DATA: - Bending capacity Ø 10 to 60 mm - bending radius min: 300 mm at Ø 42,4 mm - Bending direction right and left - Digital bending adjustment for radius and pitch - Safety foot switch with emergency stop function - Maintenance-free robust three-phase motor Bodjng A R Sepfx Afhocu - Construction site suitable 230 V connection - Weight 280 kg OPTIONAL ACCESSORIES: - Support roller - for stabilization - Lifting roller - to produce controlled slope - MGR - measuring device to determine the correct radius - MGV - measuring device to determine the correct slope based on torsion - MPW - PC calculation program to determine the correct bending values - RB4303 - universal bending tool for profiles up to 60 mm height - Tools for special profiles OUR SERVICE FOR YOU ON SITE: - Welcome to the test production in our house in the demo room - Consultation-information meeting at your site - Consultation and handling as leasing/financing purchase via - Service contracts, maintenance at your site

Condition: new, Year of construction: 2025, THE ECONOMICAL MANDREL BENDING MACHINE FOR TIGHT BENDING RADII. For tube dimensions from 20 - 90 mm, this bending system offers solutions for complex geometries with standard radii of 2xD. Depending on material quality and wall thickness ratio, radii of 1.5xD can also be realized suitable for series production. With a tool height of 120 mm, there are also sufficient options for special profiles. The extremely precise and powerful electric drive of the bending axis as well as the stable and rigid construction of the mandrel carrier and the bending arm also contribute to the desired bending result. The plug-in bending tools allow a quick changeover to other tube dimensions. The clamping pressure for the tube clamping can be optimally adjusted. The PLC control (can be expanded as required via USB stick) with data memory and the latest X2X interface can accommodate an almost unlimited number of programs for bending angle, linear dimension and twisting angle for a maximum of 50 bending sequences on one tube length. A freely programmable database for up to 200 materials is available for monitoring springback values. The control system has 2 operating modes: In "Simple Bending", the length and twist of the bends relative to each other are automatically displayed. In the "Controlled bending" mode, the data is stored beforehand and a permanent target/actual comparison is performed during bending. Also available with pneumatic rotation stop or with gear-assisted length and twist positioning. Bcedpfxonh R Sus Afheu POSSIBLE AREAS OF APPLICATION: - Plant engineering, e.g. chemistry - hydraulic piping - metal construction- prototype construction- pipeline construction TECHNICAL DATA: Bending capacity 7000: Ø 20 to 70 x 5 mmbending capacity 9000: Ø 20 to 90 x 5 mm depending on the material- bending radius min/max: 40 mm/250 mm- Bending radii min: 1.5 x Ø (standard 2 x Ø ) - Multifunction machine control Bending angle adjustment (0,1°) - Mandrel support lengths 3000/4500/6000 mm - Maximum 180º bending result - Weight 1600-3200 kg (depending on version) - Ergonomic operation via safety foot switch OPTIONAL ACCESSORIES: - Automatic mandrel lubrication (minimum quantity) - Pneumatic or hydraulic quick chuck - Larger bending radius up to 300 mm - Positioning of the length and twist via automatic brake function or via manual stops by foot switch - Semi-automatic positioning of the length and twist via servo motors - Automatic tool retraction - Pipe calculation software - 10 inch touch screen with integrated tube calculation - Data transfer via cable (LAN), via radio (WLAN) or USB OUR SERVICE: - Welcome to the test production in our house in the demo room - Consultation and information meeting at your site - Consultation and handling as leasing/financing purchase via - the company JUTEC - Service contracts, maintenance at your site

Condition: new, Year of construction: 2025, machine/vehicle number: 1018, THE POWERFUL BENDING MACHINE FOR WORKSHOP AND ASSEMBLY. The compact and mobile bending machine enables precise and repeatable bending up to an outer diameter of 60 mm stationary and directly at the assembly site. A powerful three-phase motor and a precision gearbox provide a powerful drive. Optimum bending accuracy is achieved by position detection directly on the bending axis. The bending angle is set quickly and easily via a convenient, menu-driven user interface with touchscreen control, which guarantees even more intuitive operation. For more complex bending tasks, 100 bending programs can be stored, with an angle sequence of max. 8 bends per geometry. The multifunction control allows variable adjustment of the bending speed for forward and backward travel, and a parameterizable overbending function is provided to compensate for material springback. With the aid of the four material characteristics, the material is automatically overbent to the required bending angle, thus realizing an exact bending result. The "stationary tube and rotating tool" principle ensures low space requirements during bending. Sliding shoes are used for thin-walled tubes to achieve a wrinkle-free bending result and to bend bends with minimal deformations from e.g. stainless steel and copper tubes. With the PB20 profile bending attachment, flat, square and round bars can be bent without any problems.Extremely small bending radii are made possible with the KBV small bending attachment. POSSIBLE AREAS OF APPLICATION: - Plant engineering- Hydraulic piping - Meander bending- prototyping- Sanitary and heating construction TECHNICAL DATA: Bending capacity 6000S: Ø 6 to 50 x 4 mm alternating current 230 V Bending capacity 6000D: Ø 6 to 60 x 4 mm Bending capacity 6000DS: Ø 6 to 60 x 5 mm three-phase current 400 V Bending capacity 6000D: Ø 6 to 60 x 4 mm three-phase 400 V - Bending radius min/max: 36 mm/280 mm - Optional large bending radii up to 500 mm - Multifunction machine control Bending angle adjustment (0.1°) - Maximum bending angle 240 - Hexagonal shaft 40 mm for quick tool change - Safety foot switch with emergency stop - Weight 110 kg OPTIONAL ACCESSORIES: - Profile bender PB20 - for bending flat and square iron up to max. 100 x 10 mm, round iron up to max. 20 mm - Roller bender RB43 - The RB43 is placed on the 6-edge shaft of the bending axis. By switching over to endless bending, the bending system acts as a drive unit. - Small bending device KBV - Special tool according to specification OUR SERVICE FOR YOU ON SITE: Bcsdpfx Asng Ax Sjfhou - Welcome to the test production in our house in the demo room - Consultation-information meeting at your site - Consultation and handling as leasing/financing purchase via - Service contracts, maintenance at your site

Condition: used, TECHNICAL DATA: - Load capacity: 500 kg/m² - Grid dimension: approx. 4,200 x 5,000 mm - Top edge of floor covering: approx. 4,030 mm - Clear height: approx. 3,700 mm - Colour: blue - Condition: used Bcedpfx Ajumbp Refhou Scope of delivery: - Columns - Main and secondary beams - Cross bracing - Floor decking PRICES: Price: from €45.00 net per m², ex warehouse Nordhorn. OPTIONAL ACCESSORIES: - Guardrail - Flush wall connection - Staircase - Transfer station - Collision protection YOUR CONTACT PERSONS AT OUR COMPANY: - Tanja Henkelmann - Rainer Nürenberg - Oliver Kopp TRANSPORT & INSTALLATION We are happy to assist you with the transport and installation of the goods. This item is available for collection. Delivery or shipment is possible for an additional charge. The extra costs depend on the delivery destination and the size of the consignment and are quoted individually on request. PAYMENT TERMS Payment terms will be agreed upon in the event of an order. The price is per unit/net price as stated in the description (plus VAT). You will of course receive an invoice with VAT shown separately. ABOUT US The company DLK in Nordhorn trades in new and used products in the areas of warehouse logistics, conveyor technology, mezzanine floors, textile warehouses, as well as machinery for trade, industry, and the skilled trades. We continuously offer attractive used equipment from various manufacturers/brands at competitive prices. Should you have any questions, please feel free to contact us. Connect Four – The Four Success Pillars of DLK – Storage Technology | Levelmaker® | Logistics | Solutions

Condition: ready for operation (used), Year of construction: 2019, functionality: fully functional, machine/vehicle number: 1 790 58 450, turning length: 990 mm, turning diameter: 160 mm, spindle speed (max.): 4,500 rpm, spindle speed (min.): 1,500 rpm, travel distance X-axis: 280 mm, travel distance Z-axis: 2,400 mm, spindle motor power: 30,000 W, rapid traverse X-axis: 30 m/min, rapid traverse Z-axis: 100 m/min, rotational speed (min.): 1,500 rpm, rotational speed (max.): 4,500 rpm, total height: 2,950 mm, total length: 5,550 mm, total width: 2,550 mm, feed length X-axis: 280 mm, feed length Y-axis: 2,400 mm, feed rate X-axis: 30 m/min, feed rate Z-axis: 100 m/min, type of input current: three-phase, torque: 191 Nm, overall weight: 16,000 kg, chuck outer diameter: 215 mm, spindle nose: A6, mount diameter: 40 mm, Equipment: documentation/manual, rotational speed infinitely variable, Manufacturer: J.G. WEISSER SÖHNE GmbH & Co. KG Type: UNIVERTOR AS90/650RT General features: Machine type: Horizontal shaft turning center with pick-up loading Area of application: Complete machining of shafts and rotationally symmetrical components Loading: Pick-up automation Processing types: Green turning, hard turning, roughing, finishing Tool carrier: 12-way turret with electric drive (VDI 40) Additional options: Driven tools, rotary turning, NC-adjustable steady rest, measuring probe Main spindle: Spindle bearing diameter: 90 mm Spindle flange: A6 according to DIN 55026 Drive power (100/40% ED): 18/23 kW or 23/30 kW Nominal speed: 1,500 rpm Maximum speed: 4,500 rpm Torque (100/40% duty cycle): 115/146 Nm or 151/191 Nm Travel paths & axes: Max. turning diameter: 160 mm Max. chuck diameter: 215 mm Center distance: Max. 990 mm Travel paths X/Z axis: 280 mm / 2,400 mm Max. feed force X/Z (40% duty cycle): 10 kN / 8 kN Max. travel speed X/Z: 30 m/min / 100 m/min Tailstock: Pressure force: 850 daN Centering center holder: MK4 Max. speed: 4,500 rpm Dimensions & weight: Machine dimensions (L×W×H): 5,550 × 2,550 × 2,950 mm Weight: 16,000 kg Bedpfx Asvxf U Ejfhecu

Condition: good (used), Year of construction: 2005, functionality: fully functional, Offered is a Fein spring balancer, adjustable from 4.5-9kg, with a 2m cable pull and adjustable spring force. Several available, year of manufacture 2005. Further details upon request. Payment in cash or advance payment. Sale only to commercial customers. No warranty, no guarantee. Bcjdpfxjw Tm Rne Afheu

Condition: ready for operation (used), T-Slot Table, T-Slot Worktable, T-Slot Fixture Table 3000 x 1750 mm, Used Machine Overall Dimensions: 3000 x 1750 x 350 mm Bsdpfx Aev R Dqvofhjcu Slot Size: 65x27 mm Weight: 3500 kg

Condition: excellent (used), Year of construction: 1988, For sale: Industrial vibratory finishing machine from the renowned brand SPALECK (Max Spaleck GmbH & Co. KG, Bocholt, West Germany) – model VAT-240. Robust unit manufactured in 1988, designed for professional finishing of components. Ideal applications include: • Surface polishing • Deburring after machining • Edge rounding • Cleaning and surface preparation prior to painting or electroplating Works with different types of media – ceramic, plastic, or steel – depending on the workpieces to be processed. Technical data: • Model: VAT-240 • Year of manufacture: 1988 Bcsdew Ixw Aepfx Afhju • Maximum batch load: 500 kg • Power supply: 3-phase, 380 V, 50 Hz • Control voltage: 220 V • Rated current: 20 A • Protection: 25 A • Total power: 18.1 kW • Serial number: 63712 • Included: control cabinet with START/STOP buttons, emergency stop switch, and ammeter The machine is complete, in good technical condition, and ready for operation upon connection. Heavy-duty construction, discharge chute with rubber cover, and convenient media change system. SPALECK is a German brand known for manufacturing reliable vibratory finishing machines, highly regarded by industrial plants worldwide.

Condition: excellent (used), Year of construction: 2010, Wittmann W853 Linear Z=4000mm , payload: 41,5 kg Number of axis: 3 X: 1500 mm Y: 2600 mm Z: 4000 mm \+ C axis pneumatic Reach: 4000 mm Payload: 41 kg Robot has NEW CPU + batteries , fully tested by Wittmann technician in our showroom. Bjdpfxswnfmfo Afhjcu

Condition: used, mileage: 1,92,000 km, power: 92 kW (125.09 HP), first registration: 09/2015, fuel type: diesel, overall weight: 3,500 kg, color: white, gearing type: mechanical, emission class: euro5, number of seats: 7, total length: 6,200 mm, loading space length: 3,000 mm, Equipment: ABS, central locking, soot filter, Now chat via WhatsApp: Quick & easy contact with our sales advisor. Attention !!! Sale preferably to commercial customers only Internal ID number: [ 3125 ] ----Optional add-ons available: Bodpfxeygcdks Afhjcu * 12–64 months warranty (valid throughout the EU) * New inspection * New TÜV & emissions test (AU) * Nationwide delivery * Financing available even with zero down payment * Spring Offer: Upon request and for just €999 extra, the towing capacity can be increased up to 3,500 kg (depending on vehicle and manufacturer specifications). ----Vehicle highlights: * 19% VAT reclaimable * Regularly maintained * German vehicle * Ready for immediate use * Maxi version * Long flatbed * Double cab chassis (DoKa flatbed) * Towbar * Raised side panels Special equipment: Audio system: Radio/CD player with multi-function display, configuration with specific central locking, Visibility Package 1, Seat Package 2: driver’s seat (4-way adjustable) – double passenger bench, synthetic leather Further features: 2nd battery, overhead storage compartment in cab, driver's airbag, traction control (ASR), external mirrors with short support arms, indicator integrated in mirrors, onboard computer, headliner in passenger compartment, rev counter, electronic brake force distribution (EBD), electronic differential lock (EDS), hill-start assist, 150 A alternator, recirculation heating, Isofix child seat fittings, body/chassis: wide flatbed, body/chassis: standard double cab flatbed, steering column (steering wheel) adjustable for height/length, headlight height adjustment, engine: 2.2 Ltr. – 92 kW TDCi CAT, production site: Otosan, wheelbase 3,954 mm, spare wheel with drive tires, low emissions in accordance with Stage 5 / Euro 5, seats in loading/passenger compartment: 1st row, 4-seater bench, steel wheels 6.5x16, front wall heightening for alloy flatbed, semi-painted bumper, tinted windows ----Leasing or financing required? We offer attractive options – zero down payment possible! Contact us for details. Contact: Telephone: E-mail: Location: Nutzfahrzeuge West GmbH Rudolf-Diesel-Str. 2 45711 Datteln – Germany Opening hours: Mon–Fri: 9:00 – 18:00 Sat: 9:00 – 14:00 ----Notice: All details published online are non-binding and for general vehicle description only. Errors, typos, and prior sale excepted. The binding specification of the vehicle results exclusively from the purchase contract at the location or from written confirmations. Vehicles with more than 50,000 km mileage or older than 3 years are preferably sold to our business customers.

Condition: good (used), mileage: 5,23,157 km, power: 265 kW (360.30 HP), first registration: 03/2011, fuel type: diesel, tire size: 385/55R22,5, axle configuration: 6x2, wheelbase: 4,950 mm, fuel: diesel, brakes: retarder, color: blue, driver cabin: day cab, gearing type: mechanical, number of gears: 8, emission class: euro5, suspension: air, total length: 10,500 mm, total width: 2,550 mm, total height: 3,650 mm, loading space length: 8,120 mm, loading space width: 2,480 mm, loading space height: 2,310 mm, Year of construction: 2011, Equipment: ABS, cruise control, retarder, tail-lift, traction control, = Additional Options and Equipment = - Digital tachograph - Trip recorder (control unit) - Short cab - Tail lift - Auxiliary braking system = Notes = Number of axles: 3, configuration: 6x2, unladen weight: 11,420 kg, gross weight: 26,124 kg, total fuel tank capacity: 450 liters, number of differentials locks: 1, cab type: short cab, cruise control, trip recorder (control unit), digital tachograph, color: blue, lighting type: halogen lamp, speed limiter, engine power: 265 kW (355 Hp), fuel: diesel, Euro: 5, transmission type: manual, gearbox: Scania, speed limiter, gears: 8, clutch pedal, auxiliary braking system, retarder manufacturer: Scania, power steering, ABS, ASR, starter battery, seat arrangement: 1+1, seat upholstery: fabric, seat adjustment: manual, tail lift, tail lift type: rear tailgate, tail lift capacity: 2,500 kg, tail lift manufacturer: Dhollandia DHLSU.40, tail lift material: steel, tail lift size: 240 x 251, 2,500 kg lift = Further Information = Bcjdpfx Afew Iblcjhsu Transmission Gearbox: SCA, 8 gears, manual transmission Axle configuration Brakes: disc brakes Suspension: air suspension Axle 1: Tyre size: 385/55R22.5; steered; tyre tread left: 11 mm; tyre tread right: 11 mm Axle 2: Tyre size: 315/60R22.5; twin tyres; inner left tread: 13 mm; outer left tread: 13 mm; inner right tread: 13 mm; outer right tread: 14 mm Axle 3: Tyre size: 315/60R22.5; lift axle; steered; tyre tread left: 6 mm; tyre tread right: 3 mm Weights Unladen weight: 11,420 kg Payload: 14,704 kg Gross vehicle weight: 26,124 kg Functional Tail lift: Dhollandia DHLSU.40, rear gate, 2,500 kg Load platform height: 120 cm Condition Technical condition: good Visual condition: good Damages: none Number of keys: 1 Identification Registration number: KLEYN1 = Company Information = Kleyn Trucks is one of the world’s largest independent dealers of used vehicles. Here, you can choose from a constantly changing inventory of 1,200 used trucks, tractors, and trailers. Our range includes all European brands, model years, and price categories. Why buy from Kleyn Trucks? Simple! • Large, rapidly changing selection • Recognizable quality • Good prices • Reliable business practices • We speak many languages • We understand our customers • Support with import and transportation • (Export) license plates arranged quickly • Expert technical services • The security of 'recognizable quality' • And more… Please visit our website for special offers and our full inventory: Leasing through Kleyn Trucks is possible in most European countries! Quickly calculate your leasing rate and send a request via our website. Ask directly about our European warranty package.

Condition: excellent (used), Year of construction: 2013, 1 used rapid steam generator ----- Manufacturer: CERTUSS Model: Junior 102 SC EG Steam output: 120 kg/h Max. thermal output: 79 kW Operating overpressure: 10 bar Water content: 9.5 l Test pressure: 57 bar CE mark: CE 0035 Year of manufacture: 2013 Equipped with Certuss gas burner, gas control section, Bsdpfx Asyfg Htofhjcu control cabinet mounted on boiler body, and existing coarse and fine fittings With feedwater module mounted on base frame consisting of: control cabinet, stainless steel feedwater tank, steam dryer, dosing vessel, Speck feedwater pump and sample water cooler

Condition: used, tank capacity: 12,600 l, GENERAL INFORMATION Equipment: Level indicator (no guarantee), spray head Design: vertical Internal diameter: 1,980 mm Total height: 5,300 mm Location: Bremen Nameplate: Volume: 12,600 litres Product-contact material: V4A 1.4571 (AISI316) Condition: used Cylindrical height: 3,500 mm Last application: Storage tank for resins TANK Specific gravity of medium: 1.5 (t/m³) Support type: legs Number of legs: 4 pcs EQUIPMENT Manhole / dome: in the top head (DN 600) Outlet: flange DN100 Bjdpfxsyckxnj Afhocu Remark: light residues, manhole cover missing MATERIAL PROPERTIES Leg material: stainless steel

Condition: used, Year of construction: 2006, tank capacity: 10,000 l, GENERAL INFORMATION Equipment: Crane lugs Design: vertical Year of manufacture: 2006 Bedpfx Afeycktfshscu Notes: Only nameplate is available; further technical documentation available; cylinder manhole diameter 600 mm; a DN 50 reducer is flanged to the outlet; an additional identical tank can be provided on request Internal diameter: 2,500 mm Total height: 3,600 mm Location: Bremen Technical documentation: Drawing, TÜV papers Volume: 10,000 liters Cylinder wall thickness: 3 mm Product-contact material: V4A 1.4401/04 (AISI316) Condition: used Cylindrical height: 1,500 mm Previous application: slurry TANK Max. allowable operating temperature: 80 °C Specific gravity of medium: 1.4 (to/m³) Support design: height-adjustable legs Number of legs: 3 pcs. EQUIPMENT Manhole / Dome: in cylinder, in top head (Ø 430) Outlet: Flange DN80 MATERIAL SPECIFICATION Leg material: stainless steel TECHNICAL DATA / DIMENSIONS Bottom wall thickness: 4 mm

Condition: used, tank capacity: 31,000 l, GENERAL Equipment: Crane lugs Design: upright Inner diameter: 2,800 mm Total height: 5,800 mm Location: outdoor storage Nameplate: Volume: 31,000 liters Product-contact material: V2A 1.4301 (AISI304) Condition: used Previous application: fruit juice TANK Base design: height-adjustable feet Number of feet: 5 pieces EQUIPMENT Outlet: available MATERIAL SPECIFICATION Feet material: stainless steel Bsdpfoyckfnex Afhjcu

Condition: used, Year of construction: 2016, Used machine Year of manufacture: 2016 Features and technical specifications: - Bag melter for 2 to 3 kg aluminium bag units Bjdpfxow Rhlbs Afhscu - Type of glue pump: gear pump - Pump rated speed: 93 rpm - Basic tank size (reservoir): approx. 2 l/h - Melting capacity: up to 5 l/h - PT-100 temperature sensor for device and external heaters - Control precision: +/- 1° C - Heaters (device): 2 heating zones; basic tank and pre-melting plate, separately adjustable - Connected load: 5 kW Dimensions: 1100 x 500 x 1100 mm Weight: approx. 110 kg Availability: short-term Location: 63934 Röllbach

Year of construction: 2026, condition: used, functionality: fully functional, total length: 1,500 mm, load capacity: 18,000 kg, Tragedorn Load Center: 1200 ISO Class: Terminal West Condition: As new Technical Condition: New Bedpfxsycm Hbo Afhscu Description: 254 mm diameter for steel coil handling

Year of construction: 2026, condition: used, functionality: fully functional, total length: 1,500 mm, load capacity: 18,000 kg, Tragedorn Load center: 1200 ISO Class: Terminal West Condition: As new Technical condition: New Description: 254 mm diameter for steel coil handling Bcjdpfjycm E Rox Afheu

Condition: good (used), Wanson steam generator from meat factory which closed in 2016. 698 Kw. Further details are on the plates shown in the photographs. Bcsdpfxei Uli Eo Afhju

Condition: used, mileage: 1,87,000 km, power: 96 kW (130.52 HP), first registration: 11/2019, overall weight: 3,500 kg, next inspection (TÜV): 03/2026, color: white, emission class: euro6, number of seats: 3, loading space volume: 18 m³, loading space length: 4,180 mm, loading space width: 2,040 mm, loading space height: 2,130 mm, Year of construction: 2019, Equipment: ABS, air conditioning, central locking, soot filter, tail-lift, ISUZU M21 with tail lift from our own fleet, with a history that can be checked. Equipment: cruise control, air conditioning, retarder, ABS, double fuel tank, on-board computer, electric windows, etc. Bsdpfsxp Tndsx Afhscu Please call us at WhatsUp/Viber also) E-mail: