Used Automatic Flute Laminator for sale (22,871)

Condition: used, Throughput depending on material type, speed, and cutting set Capacity: up to 4.000 kg/h Main motor power: 10KW / 15 KW Power supply: 380 V, 50 Hz Dimensions of the machine in cm: Width: 110 Lenght: 90 Lodou H Af Uspfx Ai Herr Height: 115

Condition: used, Year of construction: 1995, Technical details: punching pressure: 25 (250kN) t pass through width: 1800 (1660 nutzbar) mm daylight between the columns: max./min.: 155 / 25 mm stroke: Stanzhub: 130 mm total power requirement: 5,0 kW weight of the machine ca.: 2,0 t Dimensions (LxWxH): 2,3 x 1,0 x 2,2 m Hydraulic trolley beam punch hydrl. pressure 250 bar Punching table area = 1830 x 500 mm Punching trolley/plate = 500 x 500 mm; travel speed = 800 mm/sec.; punching stroke = 63 mm/s, forward/return 125/125 mm/sec. Operation via control panel and pressure switch/control lever Equipment: 2x feed rollersØ 120 x 1630mm pneumatic close/open * Lrjdpju Szfuefx Ai Her

Condition: good (used), Year of construction: 1986, Sliding headstock automatic lathe STAR Type: JNC-16 Year 1986 with Fanuc OT control . Bar capacity max: 16 mm. Ledpfxevbb U Hj Ai Hsrr Further data see data sheets Machine documentation available .

Condition: used, Year of construction: 1972, Technical details: wire diameter - max.: 12 mm wire diameter - min.: 2,0 mm control for program: Process Controler Total power requirement: 18,5 kW Weight approx.: 10,5 t dimension machine xH: 2,6 x 1,8 x 2,7 m dimensions LxWxH: Schmiermittelanlage: 0,6 x 0,4 x 0,8 m dimensions electric cabinet LxWxH: 0,5 x 1,2 x 2,1 m dimensions of coil: 2,6 x 1,8 x 2,7 m WRAIGHTING AND CUTTING MACHINE from the manufacturer Wafios-Hack Also called spring coiling machine, for the production of right and left hand tension / compression springs. Feed length 17400 mm Spring Ø 120 mm Output range: Yield 1 - 70 pieces/min. Spring Ø 25 - Ø 200 mm Wire thicknesses round steel Ø 5.0 - 140 mm and square steel 5.0 - 12.5 mm Feed speed - spring length max. 42,000 mm and wire feed F1= 40 m/min. + F2= 28 m/min. + F3=20 m/min. currently mounted on the machine: 6 feed rollers for wire intake Ø 4 mm to produce the end product: tension spring wire Ø 4 mm, outer Ø 34 mm and length at 135 mm Operation via control panel, Process Controler BRANKAMP Equipment: Lubricant system Wire reel reel Switch cabinet cooler reel Optional accessories and/or spare parts see photo i.D. Ledpfxeu Ic Hno Ai Herr *

Condition: used, Year of construction: 1980, pressure 25 t no. of strokes 1500 Hub/min total power requirement 20 kW Lsdjvu E Iqopfx Ai Horr

Condition: excellent (used), Year of construction: 2005, saw blade diameter 360 / 400 / 425 mm cutting diameter 10 - 140 mm cutting speed 8 - 150 m/min required cooling water max. 40 l/min height of material-table 950 mm max. travel between columns 680 mm control Siemens Simatic total power requirement 28 kW Lrjdsvzt Eqspfx Ai Hor weight of the machine ca. 4,2 t dimensions of the machine ca. 2,8 x 1,8 x 2,2 m

Condition: new, Stromab Matrix F Automatic Fully Programmable Cross Cutting & Notching Machine A heavy duty optimising upstroke crosscut and notching machine, designed for programmable and repetitive cutting and notching from standard and / or random lengths of timber. The saw unit has a pneumatic upstroke action with variable speed control, The notching unit is independent of the saw and therefore allows for programming of the saw or notching either as separate program's or as one single job. The pusher / feed is fitted with a heavy duty rack and pinion drive feeding system for fast positioning giving a high level of repeat cutting accuracy. The saw unit and clamping area is totally enclosed by a clear hinged electrically interlocked hood that while giving the operator a clear view of the cutting area still gives complete protection. The infeed and outfeed tables are of all steel construction meaning even heavy sections or packs of timber can be processed. For additional operator safety the rear of the pusher system is guarded, while there is a full length safety pull cord on the front infeed table. Programming and entering of cutting lists is very simple through a colour touch screen controller with graphic representation of the cut pieces. The machine offers full optimisation and also has the added optional facilities of defect cutting and remote programming from PC or laptop with transfer vis USB key or network. Additional options also include - extended outfeed table and label printing. To date we have supplied over 250 Matrix saws in to the UK, with a number of customers installing several machines. Lodpfxsdy Hrds Ai Horr Saw unit Self braking saw motor 10hp Saw blade diameter 500mm Max cutting width 360mm ( refer to chart ) Max cutting height 135mm ( refer to chart ) Dust extraction 4 x 100mm diameter Milling Unit Self braking milling motor 5.5hp Pneumatic milling stroke with adjustable speed Max milling stroke 400mm Max milling width 100mm Max milling depth 60mm Dust extraction 2 x 125mm and 2 x 100mm Push feed system 3000 to 13000mm Precision rack and pinion drive to pusher with magnetic reading tape giving a high level of repeat cutting accuracy. Pneumatic rising of the pusher at the end of cutting cycle Piece length reading photocell Positioning speed 100m/min Positioning accuracy + /- 0.4mm Touch screen control unit Remote programming of cutting list via colour graphic touch screen controller - connection via USB key. - 6 optimising criteria - longest size, minimum waste, sequence, priority size, by volume or by value. - 1000 cutting lists - 10,000 lines per list. - Cutting list entered via controller key pad or via remote PC using PC or cable - Graphic description of the workpiece.

Condition: new, Steel Frame Automatic Nailing Bridge A fully automatic nailing station for nailing or stapling sheet materials in accordance with the design specifications including the following functions: ​ 1. Nailing or stapling of sheeting 2. Routing of openings or overhangs 3. Application of breather membrane 4. Nailing or stapling of battens ​ Specification Full PC control with 17” touch screen Interactive display of operation being performed Automatic download from drawing software. Heavy duty tables with one fixed side and one moving side 90 degree squaring corner blocks with pneumatic retraction to enable panel to move to next position when finished 1300mm minimum panel height Maximum panel height up to 3.5m (optionally extendable) Maximum panel length 6m – optionally up to 13m 400mm wide heavy duty work tables 825mm working height 300mm maximum panel thickness (optionally 5000mm) Motorised table opening with automatic brake locking Bridge mounted with one nailing / stapling tool mounting as standard. (Options for 2 or 3 nailing tool mounts) Full integration with major software packages including Sema, Dietrich;s, HsbSoft, CADWORKS, Gang Nail & Mitek. Batten application system with guide to ensure they battens are kept straight before nailing including batten storage area Pneumatic lifting rollers to assist the manually transporting of the finished panel to next position. Optional electrically driven sheet feeding system, including automatic sheet feeding and height indexing of the support table. Optional router unit with 4kw motor - servo drive controlled Optional Equipment ​ Table with rails mounted for bridge Additional price per meter for table with rails mounted Independent rails to travel 8m over one 6m capacity table (16m of rail in total) Additional price per meter of rail Working table for holding panel 6m (no rails mounted) Additional price per meter for table Motorised chains rather than manual rollers - initial cost Price per meter for motorisation Baton positioning guiding arrangement Additional tool mount Paper roll clamp, holder and software Electric paper cutting Ledpfodzc Rxjx Ai Hsrr Panel thickness of 500mm Saw blade in X, Y, Z & C axes 350mm max panel thickness Saw blade in X, Y, Z & C axis 500mm max panel thickness. Inclination of the sawblade to one fixed angle Router complete with frequency inverter, mounted on the bridge for routing out openings in the panels. Complete with software controls and dust extraction.

Condition: new, Semi-automatic band saw for cutting medium and large-sized solid bars and profiles, offering high performance and excellent cutting accuracy. The robust structure provides the machine with the necessary rigidity and precision for the cutting unit. Band control with a motor driven by an inverter and a special gearbox with a bronze gear and a hardened and ground worm gear. Appropriately sized flywheels. Robust band guides made with sealed guide bearings and adjustable carbide inserts. Band tension is achieved via an electromechanical device with a microswitch-controlled blade rotation. Safety device to prevent accidents on the flywheel cover and on the blade. Cutting thickness: 1.5 mm Cutting range: 60° left / 60° right Brush band cleaning device Hydraulic power unit motor: 0.37 kW Electric pump: 0.09 kW for band cooling Vise, jaw height: 250 mm Vise, jaw length: 200 mm Lrsdpfxsfh R Tus Ai Hjr Work table height: 760 mm Machine weight: 1250 kg / 12260 N

Condition: new, Semi-automatic band saw for cutting medium-sized solid bars and profiles, offering high performance and excellent cutting accuracy. The robust structure provides the machine with the necessary rigidity and precision for the cutting unit. Belt drive with a two-speed motor and a special gearbox with a bronze gear and a hardened and ground worm gear. Properly sized flywheels. Heavy-duty belt guides made with sealed guide bearings and adjustable carbide inserts. Belt tension achieved via an electromechanical device with a microswitch-controlled blade rotation. Lredpfofibd Tex Ai Hjr Safety device to prevent accidents on the flywheel cover and on the blade. Cutting thickness: 1.5 mm. Cutting angle: 60° left, 60° right. Adjustable stop for making cuts of the same size. Brush-type belt cleaning device. Hydraulic power unit motor: 0.37 kW. Electric pump: 0.09 kW for belt cooling. Vise, jaw height: 200 mm. Vise, jaw length: 185 mm. Worktable height: 760 mm. Machine weight: 820 kg.

Condition: new, MACC 320 MS semi-automatic bandsaw New item – “CE” marked Technical data sheet attached. Available for immediate delivery, subject to prior sale. The key features of the machine (blade support rigidity, flywheel sizing, blade guide, blade tensioning) have been the subject of careful study in order to prevent blade yielding, increase durability, improve cutting linearity, and reduce cutting time. Vertical rotation on a spindle with adjustable tapered roller bearings, free of play. Lredpefibfajfx Ai Hor Blade drive with a two-speed motor and a special gearbox with a bronze gear and a hardened and ground worm gear. Flywheels sized appropriately. Robust blade guides made with sealed guide bearings and adjustable carbide inserts. Blade tension achieved via an electromechanical device with a microswitch-controlled blade rotation. Safety device to prevent accidents on the flywheel cover, the control knob, and the blade. Cutting thickness: 1.2 mm Cutting range: from 0 to 60° to the right Adjustable stop for cuts of the same size. 0.06 kW electric pump for blade cooling. Operation: Starting the cutting cycle via the start button; the machine: 1. closes the clamp and activates the blade motor 2. lowers the arm for cutting 3. the arm returns to its starting position 4. stops the blade motor 5. opens the clamp Manual cutting option available. ACCESSORIES AVAILABLE UPON REQUEST: Single-phase 69 m/min motor Variable speed drive from 20 to 90 m/min

Condition: good (used), Late model APC turret saw. Has been cutting frozen loins into chops. Ljdpfjtq A Nxsx Ai Hsrr

Condition: as good as new (ex-display), Please check in your junk mail if you do not receive a reply within 24hrs from sending your inquiry !!! CAN SHARPEN MAX 406MM DIAMETER CUTTERS !!! The G-716 Semi-automatic Cutterhead Grinder is used to sharpen 178mm to 406mm diameter eased edge, milled to pattern, and fingerjoint cutterheads. Worktable traversing is automatic and has adjustable stops. Cutterhead indexing is manual. Each knife is held against a positive stop while being ground !!! No Index Plate To Change No index plate to change when working with heads with different numbers of knives. The use of an index plate assumes that the knives and head separations are uniform throughout, which is often not the case. If the height of the knife is high or low, then the front face of the knife will vary from knife to knife making the task of grinding difficult. The one constant is the back face of the knife, therefore the use of an indexing stop against the back face will provide for accurate indexing regardless of the irregularities in the knives and head slots. Head Indexing and Wheel Feed: Manual Ledpfxjq Dzi Ts Ai Hjrr Minimum / Maximum Diameter Cutterhead: 7″ Min./16″Max. 178mm Min./ 406mm Max. Worktable Feed: Air / Oil Travel (maximum): 12″ 305mm. Adjustable Limits: Proximity Switch Speed: Fully Adjustable Index Method: Manual index after each knife is ground. Grinding Spindle: 1-1/2 HP Wash Down Duty TEFC Motor 3600 RPM, Dual ABEC 7 Precision Bearings, with Sealed Lubrication. 8″ (203mm)Diameter Grinding Wheel (9″ 229mm Diameter Max.) Coolant System: 15 Gallon Tank with Casters, Sediment Tray Full View Sight Glass, 5 GPM Pump (120VAC) Wash Down Hose Included Specifications Grinds 7″ to 16″ diameter eased edge, milled to pattern, and finger joint heads Automatic traversing worktable with adjustable travel limits Manual indexing of knives against a positive stop with grinding position pneumatic brake allowing precision indexing without the need of an index plate High precision 1-1/2 HP grinding spindle with sealed lubrication Recirculating adjustable flow flooded coolant system with wash down hose Fully enclosed grinding chamber with viewing windows and task light Grinding wheel feed allows unattended operation. New Proscale.

Condition: refurbished (used), Split into 30 bites Weight range: 32-70 g/piece. Adjustable height of rounding space including 3 plastic rounding plates complete gearbox in oil bath 400V - 3 Ph - 50 Hz motor serial motor protection head opened for cleaning condition: very good (after general overhaul) Lrsdpfxjtt Am Re Ai Hjr Quantity of dough per tray (grams): 960-2100 Length x width x height (mm): 800 x 690 x 1470 Power (kW): approx. 1.6 Net weight (kg): 540

Year of construction: 1995, condition: like new (used), * Automatic flatbed die cutter * Very good condition. Cldsvexqcy * Possible to see in production. Ledpfxskyt U Te Ai Hsrr * Max size 1100x1600

Condition: used, Year of construction: 1987, Max. Sheet Size X : 760 mm Max. Sheet Size Y : 1020 mm Min. Sheet Size X : 320 mm Min. Sheet Size Y : 460 mm Production Capacity Max : 35 m/min Technical data can vary according to job, consumables and possible other factors Lrjdpfx Ajikq Hhei Hsr

Condition: used, Year of construction: 2013, functionality: fully functional, total length: 20,000 mm, We are selling used linear carwash from well known manufacturer CHRIST, year of production 2013. Carwash is complete, without chains and dry wiping. Approximate length of carwash is 20 metrov. Lrodoxy E Azopfx Ai Hjr Including: • Advertising and foam spraying portal • Double-sided brushes for washing side skirts and rims • High pressure washing portal • Portal for washing with textile brushes • Driers • Waxing platform • Detergent dispenser • Floor gratings Suitable for companies that want to increase vehicle washing capacity or install a new washing line with reliable equipment.

Condition: used, The hydraulic automatic tilting kettle with a capacity of 600 liters is designed for professional use in the food processing industry. The hydraulic tilting system ensures easy and safe emptying of the contents. The double jacket with thermal oil provides even heat distribution and precise temperature control, making it suitable for cooking, mixing, and thermal processing of soups, sauces, jams, creams, and ready meals. Manufactured from high-quality stainless steel, it ensures durability, hygiene, and long service life. Technical specifications: Hydraulic automatic tilting kettle Manufacturer: Sind With cover Lodjyn Ikxepfx Ai Hsrr Double jacket- thermal oil Volume: 600 liters Power: 30.7kW Made out of stainless steel Machine dimensions in cm: Length: 205 Width: 158 Height: 123

Year of construction: 2004, condition: used, Automatic bar feeder for diameters from 6 to 45 mm and a maximum bar length of 3,300 mm. CE compliant, complete with manuals and certification. Lodpfoww Hx Iex Ai Hsrr

Condition: used, Automatic Multi-purpose Iron Twister GLASER Type GDM 3 motor-driven rod twisting machine equipped with ring bending attachment, profile bending machine Year of manufacture: 1977 Twisting length: 1200 mm Twisting speed (Level 1): approx. 10 rpm Twisting speed (Level 2): approx. 20 rpm - Spindle drive via large geared motor Lrjdpfow Dgi Tsx Ai Her - Arch and ring bending machine, not complete - with HAWE hydraulic unit up to 600 bar for auxiliary functions - 4-square tool holder for twisting tools Motor power: 3.3 kW Power supply: 380 Volt, 50 Hz Space required (L x W x H): 2120 x 720 x 1100 mm Weight: approx. 600 kg Good condition

Condition: excellent (used), Year of construction: 2007, machine/vehicle number: 1936, Order- No.: 153-03 Equipment / Additional information: No. of ups: 3 Max. sheet size, width x length (cm) Lrodpfxoxixb Ao Ai Hor 1 up / 76 x 30,5 2 ups / 33.5 x 30,5 3 ups / 23.5 x 30,5 Min. sheet size, width x length (cm): 11 x 9.5 with small format equipment: 9 x 6.5 Max. pile height (mm): 150 Min. pile height (mm): 20 Max. speed (m/min): 200 Max. output (piles /h): 1,800 Banderol width (mm): 5 Pressing force (N): 35,000 Infeed height (cm): 40–105

Condition: used, Large Size Sewing machine Meccanotecnica Aster 2000/51 Fadenheftmaschine - Sewing machine Meccanotecnica Aster 2000/51 Year 1997 - Serial-No. 115208 Pre-loader Meccanotecnica Sistema Large Size  Opening device (4+4) Lrjdpfx Aieydfhye Hor Sheet control Sewing device, Transport chain Thread cutting device Delivery and Plus Stacker with roller conveyor belt Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: used, Automatic Platen Die Cutter ETERNA ML 930 GII with 3 Operation modes Halbautomatischer Stanztiegel / Automatic Platen Die Cutter ETERNA ML 930 GII Year 2008 - Serial-No. EP51568 Lrsdpfox U Adnjx Ai Hor Format 670 x 930mm Operating modes: Single, Continuous nd with time delay on opening Electromagnetic clutch and brake Included frame and tools, in very good condition Safty Cover Weight 3800kgs - Power supply 380 V Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: used, Year of construction: 2012, Technical data: Cutting range round / square / rectangular ø: 400 / 350 x 350 / 380 x 300 mm Saw blade dimension: 650 x 50 x 2.5 mm 3 stroke speeds: 40 / 62 / 90 strokes/min Drive power: 3.0 kW Lodpsydittjfx Ai Hsrr Footprint (WxDxH), approx.: 1800 x 650 x 1250 mm Weight, approx.: 1050 kg Equipment: - 3 stroke speeds - Infinitely variable cutting pressure adjustment - Minimum quantity lubrication - Pre-tensioned plate guide for the saw frame - Dustproof enclosed gearbox - Accelerated return stroke of the saw frame - Enclosed oil hydraulic system - Coolant device - Limit switch - Automatic lifting of the saw frame - Miter device up to 45° - 1 new saw blade

Condition: new, functionality: fully functional, power: 2 kW (2.72 HP), gearing type: automatic, fuel type: electric, color: silver, overall weight: 450 kg, Year of construction: 2025, machine/vehicle number: MZpf001, Equipment: CE marking, The packaging machine can complete the function of material lifting, measuring and weighing, etc. The machine is composed of screw feeding, real-time weighing and dust removal device, etc. It can form a fully automatic production line with bag feeder, heat sealing machine, bag sewing machine, etc. Lrsdpfjxxn Auex Ai Hor