Used Automatic Flute Laminator for sale (22,095)

Condition: used, Year of construction: 2005, functionality: fully functional, Excellent condition, low mileage machine! There is a video of it in action. Cgsdpfxjzgvuno Acgew

Condition: used, Year of construction: 2012, machine/vehicle number: LV45, Technical Summary and Application Scope – ATES Giorgia 6000 bphThe ATES Giorgia 8000 bph is a continuous-motion washing and rinsing system for glass bottles, suitable for both returnable and new bottles. It is designed for stand-alone use or seamless integration into existing or new bottling lines. Built primarily from AISI 304 stainless steel with plastic baskets and continuous-motion conveying, the machine ensures robust performance with industrial-grade safety protections.Main Technical DataType: Industrial glass bottle washer and rinser, suitable for recycled and new bottles.Nominal output capacity: up to 6,000 bottles/hour depending on bottle format, contamination level, and line configuration.Materials: AISI 304 stainless steel structure; plastic baskets; stainless-steel doors and inspection windows.Mechanical composition: Shelves, baskets for bottle housing, and automatic loading/unloading with push bars. Easy inspection access for maintenance.Water treatment: Hot-water washing with caustic detergent (soda) followed by multi-stage rinsing.Installed electrical power: approx. 20 kW.Electrical supply: 400 V, 3-phase, 50 Hz; auxiliaries 24 V; PLC/SCADA integration (Siemens, Omron, Allen-Bradley).Water consumption: 1.0–1.5 m³/h via 1″ G (BSPP) supply, minimum 1.5 bar.Drainage: integrated rinse and tank drainage via 2″ pipeline.Compressed air: 6 bar operating pressure; approx. 20 Nl/h; 1/4″ connection.Thermal energy: approx. 250,000 kcal/h (~291 kW) via dedicated heat exchanger, compatible with steam or hot water supply; typical wash temperature around 70 °C for caustic stage.Filtration: internal filtration plus 0.2 μm microfiltration for process water.Sanitation: cleaning and sanitization stages including pre-wash and rinse, with detergent and disinfectant dosing; thermal insulation of tanks and piping for energy efficiency.System Architecture and Process FlowReturnable bottle cycle (full washing and rinsing)Automatic loading into baskets via push bars.Pre-wash spray to remove dirt and label residues.Immersion in hot caustic bath to disintegrate adhesives and organic matter.High-pressure internal and external washing through jetting manifolds.Multiple recirculating rinses followed by a final rinse with clean water or potable/demineralized water.Continuous label and debris extraction with filtration to prevent clogging.New bottle cycle (rinsing only)Spray pre-wash.Pre-treatment with detergent solution. Codpoxqmqzofx Acgogw

Condition: used, bore 60 mm length 78 mm Cgedpezdvbvofx Acgjw circle diameter 156 mm number of blades 4 Z material Stahl Available: 1

Year of construction: 2015, condition: excellent (used), Microglass FLY 600 Glass Lamination Furnace – a professional machine for the production of laminated glass. For sale is a professional Microglass FLY 600 lamination furnace designed for the production of laminated glass using the vacuum method. The machine is ideally suited for glassworks producing safety glass (VSG), decorative glass, glass with EVA film, and for drying coatings. The unit is equipped with a modern heating system based on infrared (IR) emitters and forced hot air circulation, which ensures uniform temperature and high lamination quality. (mitindustrial.it) Technical specifications: ● Model: FLY 600 ● Manufacturer: Microglass / MIT ● Application: glass lamination, drying of paints/coatings ● Working area: ● 1 platform 1800 × 3200 mm ● Working chamber height: 600 mm ● Number of working drawers: 1 ● External machine dimensions (closed): ● approx. 2450 × 4230 × 1350 mm ● Length with open drawers: approx. 8500 mm Codpfxozga H Ij Acgjgw ● Machine weight: approx. 3100 kg ● Installed power: 45 kW ● Power supply: 400 V, 3 phases, 50 Hz ● Average energy consumption per standard cycle: approx. 27 kWh ● Lamination temperature: 130°C ● Drying temperature: 150°C ● Vacuum pump: ● two-stage ● power approx. 1.5 kW ● Control: ● touch panel ● digital vacuum gauge ● Programs: ● up to 256 programmable recipes ● possibility to set time cycles ● Heating system: ● tubular IR emitters ● hot air circulation ● Forced cooling: YES ● High-strength silicone membrane ● PTFE mesh to improve vacuum parameters ● Possibility to use an additional drawer to increase productivity (mitindustrial.it) Machine advantages: ✔ large production format ✔ high lamination quality without air bubbles ✔ economical operation for serial and single production ✔ intuitive operation via touch screen ✔ solid industrial construction ✔ ideal for VSG, decorative glass, and custom projects The machine is ready for operation. An excellent solution for professional glassworks looking for an efficient lamination furnace.

Condition: good (used), Strapping machine, packaging machine Cjdpfx Aob A Ibcscgogw -Through hole: 500 x 500 mm -Strapping band: 5 mm -Core diameter: 60 mm -Coil width: 120 mm -Pressing the pedal triggers the automatic strapping.

Condition: new, Thomas Super Trad 301 So Easy – Semi-automatic metal bandsaw Promotional price: €9,400 instead of €11,100, excluding VAT. Capacity, round: 255 mm - The SO EASY saw enables a complete cutting cycle without constant operator presence thanks to the hydraulic control system for lowering the saw frame. - Hydraulic vice - Limit switch to adjust the saw frame return position directly above the material to be cut - Selector switch to switch to MANUAL cutting mode with a button for quick access to the material to be cut - Central control panel on the front of the machine with a bright alarm system - Automation is controlled via a safety relay - Highly efficient hydraulic pump and low energy consumption - Practical and reliable for all cutting requirements of medium-sized ferrous materials - Large, round "plateau" work table that rotates with the blade during miter cuts, guaranteeing excellent support for the material to be cut. This system prevents the saw blade from cutting the work table, as is the case with conventional bandsaws. Cjdpfezcpkpsx Acgegw - Solid cast iron vice with handwheel and quick-release lever - The vice is equipped with a practical handle for quick movements and is mounted on a rail to allow for lateral movement. - Cuts from 0° to 60° to the right and 45° to the left are possible - Saw blade rotation with 2 electric speeds - Saw blade tension adjustment via handwheel and safety microswitch in case of blade breakage or insufficient blade tension - Coolant electric pump - Saw blade cleaning brush FEATURES - Saw frame, vice and plateau made of cast iron - Precision saw blade guide with carbide pads and adjustable rollers - Gears immersed in oil STANDARD EQUIPMENT - Adjustable stop with millimeter scale - Hydraulic vice - Material support bracket - Bimetal M42 saw blade 2750 x 27 x 0.9 mm - Set of service keys - CE certification and operating and maintenance manual OPTIONAL - Roller conveyor loading side (2 m) - Roller conveyor unloading side with stop (2 m) - Blada minimal lubrication system - Start pedal Technical data - Capacity, round 0°: 255 mm - Capacity, round < 45°: 160 mm - Capacity, round 45° >: 200 mm - Capacity, round 60° >: 110 mm - Capacity, square 0°: 250 mm - Capacity, square < 45°: 160 mm - Capacity, square 45° >: 190 mm - Capacity, square 60° >: 110 mm - Capacity, rectangular 0°: 300 x 220 mm - Capacity, rectangular < 45°: 190 x 100 - 150 x 170 mm - Capacity, rectangular 45° >: 190 x 170 mm - Capacity, rectangular 60° >: 110 x 130 mm - Saw blade dimensions: 2750 x 27 x 0.9 mm - Saw blade speed: 33/66 m/min - Vice clamping width: 305 mm - Saw frame inclination: 30° - Working height: 940 mm - Gear reduction ratio: 40/1 - Flywheel diameter: 300 mm - 3-phase electric motor: 1.0 - 1.4 kW - Electric pump: 0.11 kW - Machine dimensions WxHxD: 800 x 1600 x 1800 mm - Machine weight: 440 kg

Condition: like new (used), Year of construction: 2024, operating hours: 100 h, functionality: fully functional, machine/vehicle number: 2024-A00280, feed length X-axis: 10,000 mm, feed length Y-axis: 4,000 mm, feed length Z-axis: 100 mm, warranty duration: 12 months, total length: 11,000 mm, total height: 2,000 mm, total width: 4,500 mm, overall weight: 2,500 kg, type of input current: three-phase, Equipment: CE marking, Semi-automatic framing machine for timber frame walls, max. 4000x10000mm - Max. stud height: 220mm - 3 nailing positions along the height - 2 BEA nail guns, strip-fed nails - Wall length production: 1000mm to 10000mm - Wall width production: 600mm to 4000mm Cgsdpfszap I Ajx Acgjw - Wall height production: 120mm to 220mm - 2 independent nailing stations (no beams) - HIWIN rail and guide system - LENZE motor - LENZE PLC - Human-Machine Interface (HMI) - Control panel - Manufacturer's warranty: 12 months - Installation and commissioning possible

Condition: reconditioned (used), Year of construction: 2004, Koenig Mini Rex 4000 automatic divider with forming station - used - year of manufacture 2004 - refurbished - maximum output 4,000/h - weight range 30-135 g - electronic control Cgsdpfx Aszgr Rfocgow - warranty - collection from warehouse / shipping option available - price on request

Condition: reconditioned (used), Year of construction: 2004, warranty duration: 6 months, Automatic bun divider Mini Rex 4000 - used - year of manufacture 2004 - weight range 30-135 g - maximum output 4,000 pieces/hour - electronic control - power supply 3 x 400 V - recently refurbished - 6-month warranty - pick-up from warehouse / shipping option available Cgsdpfxezgr I De Acgjw - price on request

Condition: used, mileage: 9,76,000 km, power: 324 kW (440.52 HP), first registration: 05/2015, fuel type: diesel, empty load weight: 7,580 kg, overall weight: 18,000 kg, axle configuration: 2 axles, brakes: retarder, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: steel-air, number of beds: 2, front tire size: 385/55R22,5, rear tire size: 315/70R22,5, number of seats: 2, Equipment: ABS, air conditioning, central locking, compressed air brake, cruise control, differential lock, onboard computer, parking heater, spoiler, truck registration, | MAN TGX 18.440 XLX cab | automatic, E6, Indarter | air conditioning, refrigerator | auxiliary heating, seat heating | cruise control, radio/CD, roof hatch | spoiler package | digital speedometer, differential lock | errors excepted, subject to change and prior sale. Cgodsv Ipq Njpfx Acgjw

Condition: used, Year of construction: 2011, functionality: fully functional, power: 3.73 kW (5.07 HP), cutting height (max.): 440 mm, cutting width (max.): 600 mm, pivoting range: 60 °, total height: 1,700 mm, total length: 2,900 mm, total width: 1,300 mm, overall weight: 1,320 kg, Equipment: CE marking, We offer this used semi-automatic band saw TOP-PORĘBA BMT460DSA, year of manufacture 2011. Motor power: 5 HP Cgodpfoyv Ai Hex Acgew Cutting diameter at 90° (round cross-section): 460 mm Cutting dimensions at 90° (square): 460 x 460 mm Cutting dimensions at 90° (rectangle): 440 x 600 mm Cutting diameter at 45° (round cross-section): 445 mm Cutting dimensions at 45° (square): 445 x 445 mm Cutting diameter at 60° (round cross-section): 295 mm Cutting dimensions at 60° (square): 295 x 295 mm Blade dimensions: 41 x 1.3 x 5330 mm Machine weight: 1320 kg If you have any questions or require additional information, please send us a message or contact us by email.

Condition: used, machine/vehicle number: 008409, Max. panel width: 4400 mm Max. panel length: 2200 mm Main saw blade projection: 120 mm No of Grippers: 10 Thin sheet loading: yes Cjdpfeygta Aox Acgsgw Postforming: yes

Condition: good (used), Year of construction: 2021, KELLER – Production line for prefabricated wall panels Cedpeziwpljfx Acgsgw Fully automated production line for manufacturing prefabricated wall panels made of lightweight concrete blocks. Year of manufacture: 2021 The line consists of: Unpacking and block feeder Layer formation with lateral pushers Mortar mixer and application system Storage and buffer zone for finished wall panels Final inspection and palletizing of the prefabricated components Block dimensions: 15 - 36.5 cm Output: approx. 400 - 480 m² / 8 hours Wall length: max. 6.5 m / min. 1.5 m Wall height: max. 3.5 m / min. 4 blocks The line is available immediately. Location: Germany.

Condition: used, Year of construction: 1989, functionality: fully functional, machine/vehicle number: 119, spindle motor power: 5 W, turning length: 160 mm, spindle speed (max.): 6,000 rpm, spindle speed (min.): 99 rpm, turning diameter: 16 mm, overall weight: 2,300 kg, type of input current: three-phase, bar passage: 16 mm, total width: 1,340 mm, total length: 1,850 mm, total height: 1,685 mm, input voltage: 380 V, number of driven tool stations in tool turret 1: 6, number of driven tool stations in tool turret 2: 6, Equipment: documentation/manual, rotational speed infinitely variable, I am offering my lathe for sale, complete with the accessories shown in the pictures. It includes a bar feeder and a chip conveyor. Cgsdoy Udcfepfx Acgew The machine is controlled by a Yasnac CNC system. The machine has two turrets, allowing for multi-axis and multi-group control.

Condition: excellent (used), Year of construction: 2002, functionality: fully functional, machine/vehicle number: 300242, cutting range round steel at 90°: 460 mm, total length: 2,320 mm, total height: 2,570 mm, total width: 3,660 mm, overall weight: 7,500 kg, cutting range square steel at 90°: 6,00,460 mm, cutting diameter: 460 mm, space requirement length: 2,570 mm, space requirement width: 3,660 mm, cutting length (max.): 9,999 mm, working height: 720 mm, section length (max.): 9,999 mm, section length (min.): 8 mm, coolant pump power: 180 W, saw drive: 9,200 W, opening width: 600 mm, saw band width: 54 mm, saw band length: 7,470 mm, additional equipment features: prędkość obrotowa bezstopniowo regulowana, Kaltenbach KBR 460 NA – automatic industrial metal band saw | cutting steel, profiles and tubes Cedeyivgdopfx Acgsgw Kaltenbach KBR 460 NA is an automatic industrial metal band saw, designed for precise and efficient cutting of round steel, profiles and tubes with large cross-sections. The machine is ideally suited for production plants, steel service centres and metal processing companies. Thanks to the automatic material feed, wide cutting capacity and the heavy-duty, robust construction typical of Kaltenbach, the KBR 460 NA is a reliable solution for batch cutting and continuous production. It ensures high cutting accuracy, excellent repeatability and minimal material waste. Technical data – Kaltenbach KBR 460 NA • Manufacturer: Kaltenbach • Model: KBR 460 NA • Year of manufacture: 2002 • Condition: used, ready for operation • Machine type: automatic industrial metal band saw / cold cutting saw • Cutting capacity round at 90°: up to Ø 460 mm • Cutting capacity square at 90°: up to 600 × 460 mm • Cutting length (max.): up to 9,999.9 mm (automatic mode) • Cutting length (min.): from 8 mm • Minimum remnant length: 30 mm (automatic mode) • Band dimensions: 7470 × 54 × 1.3 mm • Cutting speed: continuously adjustable • Working height: 720 mm • Saw drive power: 9.2 kW (standard), optional 7.5 kW • Coolant pump power: 0.18 kW • Overall dimensions (L × W × H): 2320 × 3660 × 2570 mm • Total weight: approx. 7,500 kg Key advantages • high cutting precision thanks to continuously adjustable speed • fully automatic operation with cutting lengths up to 9,999.9 mm • minimal material waste – remnant length from 30 mm • wide cutting range for tubes, profiles and solid material • heavy-duty industrial design for continuous and batch production Each machine offered by us undergoes a technical inspection and operational check prior to sale. The machine is delivered fully functional and ready for operation. Contact us for further information, pricing details or to arrange an inspection of the machine.

Condition: used, Year of construction: 1978, pressure 160 t no. of strokes 40 - 120 Hub/min sheet width mm total power requirement 40 kW Pressing capacity 160 ton Table clamping area 1,100 x 1,280 mm Ram clamping area 850 x 890 mm Distance between guides 1,120 mm Distance between columns (below guide ways) 1,350 mm Distance between Table and ram in upper position approx. 400 mm No. of strokes 40 - 120 /min Adjustment of stoke 67 / 115 / 160 mm Ram adjustment, motor driven 125 mm Ejector travel 50 mm Codpfx Acet Hwz Nogogw Total electrical load, approx. 40 kW - 500 V - 50 Hz Weight, approx. 24,000 kg Accessories / Special Features * WEINGARTEN Sheet Metal Uncoiler with overhead loop control (space saving because it does not need a loop-pit). Strip width 375 mm. The loop control guides the strip-material from the uncoiler to the machine thru a straightening device with automatic supervision. * 8-track slide bearing guide. * Automatic oil-circulation lubrication. * Hydraulic overload protection in conjunction with the ORTLINGHAUS Clutch Brake * Safety doors. * Motor-driven ram adjustment 125 mm. * Required space: 4 x 2.2 m. Height max. 4.6 m (only press)

Condition: used, Year of construction: 2005, cutting diameter 220 mm Cgodpfx Aot Hxayjcgjw band length 425 mm cutting lenght max. 2500 mm total power requirement 0,95 kW weight of the machine ca. 219 kg dimensions of the machine ca. m

Condition: used, Year of construction: 1995, turning diameter over bed 50 mm spindle passage 26 mm Cjdpfxot Hwp Te Acgjgw turning length 275 mm total power requirement 12 kW weight of the machine ca. 4500 kg CNC-Sliding Headstock Lathe, Opposite Headstock

Condition: used, Year of construction: 1987, pressure 40 t no. of strokes 500 Hub/min Cjdpfx Acjvu E Iwjgogw total power requirement 5,5 kW

Condition: used, Year of construction: 1990, turning diameter 60 mm Cgjdpfxjt Hw Ato Acgjw turning length 200 mm number of slides total power requirement 20 kW weight of the machine ca. t dimensions of the machine ca. m

Condition: used, Year of construction: 1991, workpiece diameter 30 mm threading length 110 mm Codst Hwzcepfx Acgjgw thread pitch 0,5-2,75 mm/GG total power requirement 4,5 kW weight of the machine ca. 1,7 t dimensions of the machine ca. m

Condition: used, Year of construction: 1981, cutting diameter 320 mm saw band length 4670 mm cutting width 580 mm total power requirement 7,4 kW weight of the machine ca. 3 t Sawing range, circular, max. 100 - 320 mm vertical, max. 100/100 x 320/460 mm Length of cut, min./max. 0 - 580 mm Distance from column to saw band, max. 690 mm Cutting speed, infinitely variable 16 - 160 m/min Dimensions of saw band, length x Ø approx. 4,670 x 38 mm Length of remaining pieces, automatic/single cut 100/10 mm Saw blade drive, approx. 4.4 kW Total electrical load, approx. 7.4 kW - 380 V - 50 Hz Weight, approx. 3,000 kg Accessories / Special Features: * Infinitely variable speeds of saw blade motor via servo motor and STOEBER drive. Display of cutting speed on control panel. * Infinitely variable settings of sawing feed with display of the current cutting speed. * Workpiece counter: Number of workpieces can be preset. Selection switch for single cuts / multiple cuts. * Display for band tension and cutting feed. * Automatic motor-driven material feed, controlled by a positioning processor, Model PP 160, with input of the appropriate lengths using a roll conveyor approx. 1,500 mm, with enlargement approx. 2,000 mm. And with a stable roll conveyor for the exterior area, 3,500 mm. * Built-in chip conveyor with coolant device. * Built-on switch cabinet. Condition : Good. Machine can soon be inspected under power. Delivery : Ex stock, as inspected. Payment : Net, after conclusion of contract. Thank you for your interest. Cgsdpfx Aot Hwrnjcgow We have a selection of saws on stock. Please let us know your requirements.

Year of construction: 1985, condition: used, workpiece diameter 25-90 mm threading length 3000 mm thread pitch 2-16 mm total power requirement 25 kW weight of the machine ca. 10,5 t Codpstzdyzofx Acgjgw dimensions of the machine ca. m

Condition: new, Semi-automatic band saw for cutting medium and large-sized solid bars and profiles, offering high performance and excellent cutting accuracy. The robust structure provides the machine with the necessary rigidity and precision for the cutting unit. Band control with a motor driven by an inverter and a special gearbox with a bronze gear and a hardened and ground worm gear. Appropriately sized flywheels. Robust band guides made with sealed guide bearings and adjustable carbide inserts. Band tension is achieved via an electromechanical device with a microswitch-controlled blade rotation. Safety device to prevent accidents on the flywheel cover and on the blade. Cutting thickness: 1.5 mm Cutting range: 60° left / 60° right Brush band cleaning device Hydraulic power unit motor: 0.37 kW Electric pump: 0.09 kW for band cooling Vise, jaw height: 250 mm Cgodpfxjfh R Tuo Acgow Vise, jaw length: 200 mm Work table height: 760 mm Machine weight: 1250 kg / 12260 N

Condition: new, Semi-automatic band saw for cutting medium-sized solid bars and profiles, offering high performance and excellent cutting accuracy. The robust structure provides the machine with the necessary rigidity and precision for the cutting unit. Belt drive with a two-speed motor and a special gearbox with a bronze gear and a hardened and ground worm gear. Properly sized flywheels. Heavy-duty belt guides made with sealed guide bearings and adjustable carbide inserts. Belt tension achieved via an electromechanical device with a microswitch-controlled blade rotation. Safety device to prevent accidents on the flywheel cover and on the blade. Cutting thickness: 1.5 mm. Cutting angle: 60° left, 60° right. Adjustable stop for making cuts of the same size. Brush-type belt cleaning device. Hydraulic power unit motor: 0.37 kW. Electric pump: 0.09 kW for belt cooling. Vise, jaw height: 200 mm. Vise, jaw length: 185 mm. Worktable height: 760 mm. Cgedpfofibd Tjx Acgsw Machine weight: 820 kg.