Used Automatic Milling Machine for sale (73,999)

Condition: like new (used), Year of construction: 2003, Retrofitted: 2026 Numerical control: HEIDENHAIN TNC-530 Technical features Dimensions Table dimensions: 20000 x 2500 mmNumber of T slots: 10T slots dimensions: 22 mm Traverses of axis X axis traverse: 20000 mmY axis traverse: 3800 mmZ axis traverse: 1250 mmVertical capacity: 100 / 1350 mmDistance between columns: 3200 mm Milling head Head type: Auto-indexing BC universal UAD milling head (0,1º)Tool clamping system: HydraulicTaper nose: ISO 50 (DIN 69871)   /   Pull stud: DIN 69872Speed range: 6000 rpmSpindle power: 27 kW Feedrates Rapid feedrates (X / Y,Z): 15000 / 12000 mm/min Weight and dimensions Maximum weight on table: 15000 kgMachine weight approximate: 150000 kgMachine dimensions approximate: 30190 x 8865 x 5850 mm Accessories Guarding: Door with platform access and new perimetral wire-mesh fenceAutomatic tool changer:ATC-120Chip conveyor:2 longitudinal hinge typeControl panel: 2 switched panels on each side of the tableElectronic handwheel: HR-510Coolant: External and internal high pressure through spindle Sale conditions Warranty: 6 months mechanical partsPrice and sale conditions: On request View all technical features Cgedpfxoy Nfz Es Aa Not

Condition: excellent (used), LOG CABIN MILLING MACHINE FOR PRODUCING CHALET CORNER JOINTS BY MILLING FOUR SIDES OF THE LOG BEAM. MAXIMUM LOG LENGTH 6000MM (DISTANCE BETWEEN 5770 MM) MINIMUM LENGTH 450 MM 4X MILLING HEADS PER SIDE (2 SIDES) CAPABLE OF 3 CYCLES PER MINUTE MAXIMUM WIDTH 250 MM MAXIMUM THICKNESS 140MM SUPPLIED WITH ADJUSTABLE TOOLING SUITABLE FOR 34MM TO 70MM JOINTS 8X 4 KW MILLING MOTORS DIGITALLY DISPLAYED LENGTH MEASUREMENT SYSTEM SIMPLE ELECTRONIC CONTROLS (NO PLC) 5,5 KW FEED MOTOR POSSIBLE TO SUPPLY WITH STACKING UNIT AFTER IF NEEDED MODIFIED LEFT SIDE TO ALLOW CHALET ROOF OVERHANG LENGTH AS NEEDED VERY GOOD QUALITY KNOTCHING Cgsdpfx Aoy Hb Uisa Nst PRICE DISMANTLED AND LOADED TO TRUCK

Condition: excellent (used), functionality: fully functional, We are offering this very well-maintained MAHO MH-C 900 milling machine. Factory number: 90167 Cgedpfx Aaeyryudj Not If you have any questions or require further information, please feel free to send us a message or give us a call.

Condition: used, Year of construction: 2016, Milling machines Travel distance X: 760 mm Travel distance Y :430 mm Travel distance Z: 460 mm Number of axis: 3 milling machine / machining center Control: Siemens Sinumerik 828D CNC spindle chuck: SK40 Codpfx Ajyqxy Asa Negt spindle revolutions: 10000 rpm Speed range from: 10 U/min Speed range to: 10000 U/min table size X: 900 mm table size Y: 410 mm max. workpiece weight: 350 kg tool changer: 24 - time input Power : 12 kW feed rate: 10000 mm/min control Siemens Through-spindle coolant: 30 bar Renishaw Touch Probe

Condition: good (used), functionality: fully functional, travel distance X-axis: 1,500 mm, travel distance Y-axis: 650 mm, travel distance Z-axis: 620 mm, table width: 450 mm, table length: 1,800 mm, rotational speed (max.): 6,000 rpm, overall weight: 4,500 kg, input voltage: 400 V, FOR SALE: Primero KM-150 Vertical Machining Center A reliable, well-maintained vertical machining center is available immediately from our stock in Finland. The Primero KM-150 is a versatile and robust machine suitable for a wide variety of milling, drilling, and contouring operations—an ideal solution for job shops, subcontractors, and production facilities seeking to increase capacity without the cost of a new machine. Key Specifications: Brand / Model: Primero KM-150 Year of Manufacture: 2002 Country of Origin: Taiwan Control: C-TEK (English language interface) Spindle Speed: 0–6,000 rpm Spindle Power: 7.5 kW Tool Holder: BT40 Cjdpfx Aasy Hmi So Nogt Tool Magazine: 16 positions External Coolant System: Yes Axis Travels: X-axis: 1,500 mm Y-axis: 650 mm Z-axis: 620 mm Working Table: Length: 1,800 mm Depth: 450 mm Machine Dimensions & Weight: Width × Depth × Height: 3,000 × 2,280 × 2,550 mm Weight: 4,500 kg Why choose this machine? The generous 1.5-meter X-axis travel and a solid 1,800 mm table make the KM-150 especially suitable for larger workpieces, mold and die applications, and general production milling. The user-friendly, English-language C-TEK control provides intuitive operation, while the BT40 spindle interface is an industry-standard, ensuring easy access to tool holders and consumables.

Condition: used, R80SM is a model of the rotary copy shaper (router-shaper) by Rye Machinery Ltd (High Wycombe, England) Details of the R80SM model - Machine type: Automatic rotary shaper with single or dual spindle for shape copying in furniture wood (shaper/copy router). - Application: Processing of furniture legs, frames, profiles – table rotation copies template onto the part. Typical technical parameters R80 Cgjdsyrphmopfx Aa Nst - Rotary table diameter: approx. 1600 mm (as in similar model R80 SM Speedmax). - Motor power: approx. 5–7.5 kW per spindle, speed 6000–9000 rpm. - Tables: Hydraulically/pneumatically rotating, with clamping. - Lubrication: Exactly as on the nameplate – Shell/Telania grease daily at red points.

Condition: used, R80E MC is a model of the rotary copy shaper (router-shaper) by Rye Machinery Ltd (High Wycombe, England), manufactured in 1983 (serial number 112/83). Details of the R80E MC model - Machine type: Automatic rotary shaper with single or dual spindle for shape copying in furniture wood (shaper/copy router). - Year of manufacture: 1983 (112/83 – 112th machine in 1983 or December 1983). Csdpfx Aaeyrn Ras Njgt - Application: Processing of furniture legs, frames, profiles – table rotation copies template onto the part. Typical technical parameters R80/R80E - Rotary table diameter: approx. 1600 mm (as in similar model R80 SM Speedmax). - Motor power: approx. 5–7.5 kW per spindle, speed 6000–9000 rpm. - Tables: Hydraulically/pneumatically rotating, with clamping. - Lubrication: Exactly as on the nameplate – Shell/Telania grease daily at red points.

Condition: used, Macchia Milling Machine for Turned Parts - 2 working fields - Two milling spindles Cgedpfx Aasxrpw Hj Not - Copying operation - Pneumatic component clamping

Condition: used, Dimensions (l x w x h) approx.: 3200 x 1800 x 1600 mm Weight approx.: 500 kg 3 spindles, 1 milling spindle, 2 - 3 grinding and milling spindles, feeder belt approx. 100 mm wide, total working length approx. 3000 mm, extendable workpiece support Csdpfx Aexrlgwsa Njgt

Condition: good (used), Year of construction: 1995, machine/vehicle number: 288.I.8, With the NOVA-3 tenoning machine, two rounded tenons of different sizes and inclinations can be produced at both ends of a solid wood part at the same time. The innovative technology of the NOVA-3 makes it the leading double-sided tenoning machine on the market. ROBUST MECHANICS Torsion-free, stress-free annealed steel welded construction, large-dimensioned processing units with supports and slides made of gray cast iron, absolutely vibration-free. Mechanics designed for high operational reliability with the highest production output. USER FRIENDLINESS The new swivel system of the processing units enables short set-up times, in which the position of the tools always remains constant when swiveling around the vertical as well as the horizontal axis, i.e. the swivel point always corresponds to the tool position. Even if the inclination changes, the shoulder length of the workpieces remains the same. FLEXIBILITY NOVA-3 is an extremely versatile processing machine. The large and reliable mechanics, the sophisticated design of the processing units and the innovative swivel system allow both short, heavily deformed workpieces and large parts to be machined with equal precision and high cutting performance. For the latter, the stable machine structure and the performance of the motors are a decisive factor. The flexibility is further underlined by the range of loading magazines; Depending on requirements, the customer can equip his machine with the ADR or APPC automatic loading system. The workpieces are loaded from suitable reference points. The processed parts run out at the bottom of the machine and can therefore be easily removed by the operator, transferred to a conveyor belt or placed in a container. No manual intervention is required for this, the operator only has to load the magazine. Csdpfx Aevvvr Aja Nsgt Spindle diameter: 25 mm Spindle length: 70 mm Connection diameter: 2 x 100 mm Central lubrication Automatic or manual operation Automatic material loading and discharge Min./max. element length: 199.5 mm / 2030 mm (dimension A) Element thickness: 100 mm Width: 90 mm Unit adjustment range (B and F): + 92° / - 27° Unit angle adjustment (D and H): + 45° / - 20° Unit angle adjustment (E and M): + 45° / - 10° Spindle height adjustment (C and G): + 62° / - 5° Joint height and width adjustment Spindle angle adjustment: 0° - 90° (vertical journal) Cycle speed adjustment

Condition: used, Used machine Equipment and technical data: - Vertical spindle travel: 150 mm - Spindle diameter: 30 mm - Spindle speeds: 3,500 - 7,000 rpm - With fixed spindle - Motor: 2.5–3.1 HP - Table: 830 x 700 mm - Slotting cutters up to 340 mm - With metal-jaw milling fence (Note: The Aigner parallel fence shown in the photos is not included in the scope of delivery!) Cgodey Dkgpspfx Aa Nst - With 3-roller feed Weight: 240 kg Availability: short-term Location: Röllbach

Condition: good (used), Year of construction: 2008, functionality: fully functional, Milling machine Macmon M 434 NC Manufacturer: Macmon Type: 434 NC Control: Heidenhain TNC 128 Year of manufacture: 2008 Condition: used X-axis: 400 mm Y-axis: 250 mm Z-axis: 400 mm Clamping surface 600 x 320 mm Main drive: AC motor kW 3 Speed range: Vertical infinitely variable 30 - 6300 Horizontal stepless 0 - 4200 - Feed rate 0 - 10 m/min Tool holder ISO 40 Operating voltage 400 / 50 Volt / Hz Control voltage 24V Weight 1200 kg Scope of delivery - Documentation - Machine feet - Coolant system Cgodpfsy Egccox Aa Nst - Spindle guard - Machine light - HR410 Handwheel - Horizontal spindle Counterholder

Condition: excellent (used), Year of construction: 1983, functionality: fully functional, Universal Milling Machine Deckel FP3 with 3-Axis Active Digital Readout TNC 113 by Heidenhain and Infinitely Variable Feed—Excellent Condition Codpfxoy D Tl Ij Aa Nogt Technical Data: >> Year of manufacture: 1983 Machine no. 2201-5919 >> Fixed angle table (reconditioned) >> Speed range: 25 – 2500 rpm >> Infinitely variable feed on all 3 axes >> Rapid traverse on all 3 axes >> Drive power: 2.0 / 4.0 kW >> Spindle brake >> Travel (X/Y/Z): 500 / 300 / 400 mm >> Vertical milling head movable on spindle head by 200mm >> Vertical and horizontal quill—SK40 extensible >> Pull-in system S20 x 2 >> Weight approx. 1500 kg Equipment and Accessories: >> 3-axis active digital readout Heidenhain TNC113 >> Coolant system >> Central electric lubrication About the machine: Offered here is a Universal Milling Machine Deckel FP3 in very good condition. The machine has very little backlash and all spindles move smoothly. On this newer FP3 model, the feed is infinitely adjustable in all three axes, and the machine also features rapid traverse for each axis. A major advantage is the active 3-axis digital readout. With the Heidenhain control, you can input dimensions that the machine will automatically position to. An oil change has been carried out. Mechanically and electrically tested. The Heidenhain DRO makes operation both easier and even more precise. Take advantage of the opportunity to inspect and test the machine under power on site. The machine is available immediately.

Condition: like new (used), Year of construction: 2000, operating hours: 25,000 h, travel distance X-axis: 10,300 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 1,800 mm, feed rate X-axis: 10 m/min, feed rate Y-axis: 10 m/min, feed rate Z-axis: 10 m/min, position of the milling head: 2.5 x 2.5 °, spindle speed (max.): 3,000 rpm, spindle speed (min.): 60 rpm, table width: 3,300 mm, table length: 12,000 mm, mount diameter: 50 mm, total height: 48,750 mm, total width: 1,00,000 mm, total length: 2,12,000 mm, overall weight: 1,00,000 kg, Duplex milling are two machines located one opposite the other which can work seperately or as single machine, workpiece can be machined with 2 simultaneous spindles. Production increase of up to 50% in relation to conventional solutions, i.e. individual milling machines Improvements in part precision, by managing to do the machining of the part in one single setup, in most of the cases One sole operator can control the DUPLEX milling machines Reduced space and investment requirement comparing with two single machines Fast investment amortization due to the high productivity Duplex solution admits different configurations: single working area, pendulum working areas Cjdsrx Rxtepfx Aa Nsgt For machining excavator arms / boom like, CAT, Caterpillar, Komatsu, Hitachi, Hyundai, Doosan, Case, Bobcat, JCB, Kobelco, Liebherr, Kubota, Takeuchi, Volvo X-Axis: 10300mm Y-Axis: 2000mm Z-Axis: 1800mm Table Length: 12000mm Table Width: 3300mm Table load: 100000 Power on spindle: 22/30kW Spindle speeds: 60 - 3000Rpm Spindle Taper: 50ISO/Bt/Mk Feed rate X-Axis: 10000mm/min. Feed rate Y-Axis: 10000mm/min. Feed rate Z-Axis: 10000mm/min. Millinghead auto-index:2.5 x 2.5° Working hours: 25000H Length: 21200mm Width: 10000mm Height: 4875mm Weight: 100000kg

Condition: good (used), Year of construction: 1999, functionality: fully functional, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, space requirement width: 1,975 mm, space requirement length: 1,800 mm, space requirement height: 1,900 mm, Equipment: documentation/manual, Machine is in very good condition - used as a training machine until 2018; since then, the machine has hardly been in operation. Operating voltage 400 V Spindle mount ISO 40 Quill stroke 100 mm Spindle speeds 63 – 3150 rpm Codow U Aahspfx Aa Njgt Fixed table

Condition: used, Year of construction: 1992, functionality: fully functional, machine/vehicle number: 2202, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, total height: 1,740 mm, total width: 1,740 mm, total length: 2,090 mm, overall weight: 1,725 kg, Equipment: documentation/manual, The machine is in very good condition – it was used as a training machine until 2018; since then, it has rarely been in operation. Operating voltage: 380 V. Spindle mount: ISO 40. Quill stroke: 100 mm. Spindle speeds: 40 - 2000 rpm. Rotary table. Csdjw Urirspfx Aa Njgt

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, travel distance X-axis: 650 mm, travel distance Y-axis: 480 mm, travel distance Z-axis: 475 mm, table width: 450 mm, table length: 1,200 mm, table load: 400 kg, overall weight: 2,300 kg, We offer this used Abene Machine Ab VHF-360Ti milling machine, year of construction 2011. Cedpfx Aajy Hgnhs Nsgt Serial number: 36120 Year of manufacture: 2011 Heidenhain TNC620-control Table size 1200 x 450 mm Max load 400 kg X-travel 650 mm, Y-travel 480 mm, Z-travel 475 mm Spindle BT40 Main motor 7,5 kW Weigth 2300 kg Excellent condition If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: used, functionality: unexamined, machine/vehicle number: BM 86B320, ELBO VISUALIZER - DIVIDING TABLE - VISE Cjdpfxoy Ndqxo Aa Njgt

Condition: used, Year of construction: 2017, Milling machines Travel distance X: 800 mm Travel distance Y :800 mm Travel distance Z: 550 mm HSC-machines Number of axis: 5 milling machine / machining center Control: Heidenhain TNC 640 spindle chuck: HSK-A63 spindle revolutions: 20000 rpm Speed range to: 20000 U/min table size X: 450 mm table size Y: 450 mm max. workpiece weight: 300 kg tool changer: 170 - time input Power : 25 kW Torque: 120 Nm Rapid traverse: 50 m/min feed rate: 50000 mm/min spindle cooling chip conveyor control Heidenhain 5-axis CNC machining center Heidenhain TNC 640 control 170-position tool changer HSK-A63 spindle interface KNOLL chip conveyor KNOLL oil filtration system KF 400 / FKA 620 HABOR cooling unit suitable for steel machining Cjdpfxeym Rrvo Aa Negt high precision for tool and mold making automated workpiece handling for series production

Condition: new, Year of construction: 2026, The BS370H is a powerful and reliable semi-automatic band saw with miter cuts from -45° to +60° and a hydraulically controlled vice and saw arm. The machine is irreplaceable in every locksmith's workshop and is ideal for cutting pipes, profiles and solid materials. The belt guides are equipped with special carbide plates and bearings. This has a huge impact on belt guidance, belt life, straightness, accuracy and cut quality. The carbide guide greatly reduces machine and saw blade wear. The machine is equipped with an efficient cooling pump with a closed coolant circuit. The drive of the machine is transmitted via a worm gear. The machine has a three-phase motor with two cutting speeds and motor thermal protection. The cutter is equipped with a strain gauge - a tape tension sensor and an automatic switch-off in the event of the cutting tape breaking. The shape of the upper part of the base is a tub for draining the coolant and catching chips formed during the cutting of the material. A cast iron work table with a swivel arm and a control panel on a separate arm is attached to the base. In the cutting process, the main cutting movement is the moving of the cutting band and the arm's lowering feed. The speed of the arm's descent (cutting speed) is regulated by a hydraulic cylinder. Cutter for precise, professional work. Torsion-resistant, rigid ductile iron arm and saw body. Double sided quick lock vice Codpeycqhcjfx Aa Njgt In semi-automatic mode, after pressing START, the hydraulic vise will clamp the material, the hydraulics will lower the saw arm, the limit switch will give the signal to finish cutting and the hydraulics will raise the saw arm. Technical parameters Size of the cutting band 3160 x 27 x 0.9 mm Belt tension mechanical (manual) Belt speeds 34.68 m / min Arm Drop Adjustment stepless - hydraulic cylinder Height of vice base 890 mm Diameter of saw wheel 380 mm Power 3phase, 400V Main engine power S1- 1,5/S6 -1,9kW Cooling pump motor power 46W Dimensions with base 1850x950x1500 (2050) mm Weight 491 kg

Condition: like new (used), Year of construction: 2004, Retrofitted: 2026 Numerical control: HEIDENHAIN TNC-i530 Codpfoyf Rryox Aa Negt Technical features Dimensions Table dimensions: 2000 x 900 mmNumber of T slots: 5T slots dimensions: 22 mm Traverses of axis X axis traverse: 2000 mmY axis traverse: 1000 mmZ axis traverse: 1000 mm Milling head Head type: Manual milling head (U22)Tool clamping system: HydraulicTaper nose: ISO 50 (DIN 69871) / Pull stud: DIN 69872Speed range: 3000 rpmSpindle power: 22 kW Feedrates Rapid feedrate (X / Y,Z): 20000 / 12000 mm/min Weight and dimensions Maximum weight on table: 3500 kgMachine weight approximate: 14000 kgMachine dimensions approximate: 6367 x 5070 x 2803 mm Accessories Guarding: 2 sliding doors and new perimetral wire-mesh fenceTool pedal: new foot clamping tool pedalElectronic handwheel: New HR-510Coolant: external Sale conditions Warranty: 6 months mechanical partsPrice and sale conditions: On request View all technical features

Condition: like new (used), Year of construction: 2004, Retrofitted: 2025 Numerical control: HEIDENHAIN TNC-320 Technical features Dimensions Table dimensions: 4500 x 1100 mmNumber of T slots: 8T slots dimensions: 22 mm   Traverses of axis Longitudinal traverse X: 4000 mmCross traverse Y: 1200Vertical traverse Z: 1000 Milling head Head type: New Universal Auto-indexing (UDG / every 2.5º)Tool clamping system: HydraulicTaper nose: ISO 50 (DIN 69871)  /  Pull stud: DIN 69872Speed range: 20 - 3000 rpmSpindle power: 29,8 kW Feedrates Feedrate: 5000 mm/minRapid feedrate (X / Y,Z): 15000 /  10000 mm/min Weight and dimensions Maximum weight on table: 8000 kgMachine weight approximate: 23500 kgMachine dimensions approximate: 11100 x 5392 x 3400 mm Accessories Guarding: 2 front doors and a new perimetral wire-mesh ctronic handwheel: New HR-510Coolant: External Sale conditions Warranty: 6 months mechanical partsPrice and sale conditions: On request View all technical features Cgjdpfxjyw Uqxe Aa Njt

Condition: like new (used), Year of construction: 2008, Retrofitted: 2025 Cedeyf Rtwjpfx Aa Negt Numerical control: HEIDENHAIN TNC-530 Technical features Dimensions Table dimensions: 2800 x 1000 mmNumber of T slots: 5T slots dimensions: 22 mm Traverses of axis X axis traverse: 2500 mmY axis traverse: 1000 mmZ axis traverse: 1500 mm Milling head Head type: Auto-indexing head UDG (every 2,5º)Tool clamping system: HydraulicTaper nose: ISO 50 (DIN 69871)   /   Pull stud: DIN 69872Speed range: 3000 rpmSpindle power: 22 kW Feedrates Feedrates: 5000 mm/minRapid feedrates (X-Y-Z): 20000 mm/min Weight and dimensions Maximum weight on table: 6000 kgMachine weight approx.: 20000 kgMachine dimensions approx.: 7750 x 4400 x 3100 mm Accessories GuardingNew automatic tool changer: ATC-30Longitudinal rear chip conveyorElectronic handwheel: HR-410External coolant and high pressure through spindle Sale conditions Warranty: 6 months mechanical partsPrice and sale conditions: On request View all technical features

Condition: like new (used), Year of construction: 2006, Retrofitted: 2025 Numerical control: HEIDENHAIN TNC-530 Technical features Dimensions Table dimensions: 2800 x 900 mmNumber of T slots: 5T slots dimensions: 22 mm Traverses of axis X axis traverse: 2500 mmY axis traverse: 1000 mmZ axis traverse: 1000 mm Milling head Head type: Universal Auto-indexing UDG (2.5º)Tool clamping system: HydraulicTaper nose: ISO 50 (DIN 69871) / Pull stud: DIN 69872Speed range: 20 - 3000 rpmSpindle power: 22 kW Feedrates Rapid feedrate (X / Y-Z): 20000 mm/min   /   12000 mm/min Weight and dimensions Maximum weight on table: 4000 kgMachine weight approx.: 14500 kgMachine dimensions approx.: 7367 x 5070 x 2803 mm Accessories Perimetral guardingAutomatic tool changer: ATC30Chip conveyor: rear longitudinalExternal coolant high pressure coolant through spindleElectronic handwheel: HR-420 Sale conditions Warranty: 6 months mechanical partsPrice and sale conditions: On request View all technical features Csdpfx Aajyf Rtqo Nsgt

Condition: good (used), Year of construction: 1973, travel distance X-axis: 1,500 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 860 mm, Oerlikon milling machine, lightly used, only employed for punch tool repairs. Guide columns are like new, showing no signs of wear! Highly precise, equipped with FAGOR CNC control. Suitable for workpiece weights up to 3000 kg. Cgedpfx Aey I S Rwsa Nst