Used Balancing Arbor for sale (1,407)

Condition: new, Year of construction: 2025, Heavy-duty, solid cast-iron construction High running smoothness due to ground, oil-bath lubricated gears Right-hand/left-hand operation Automatic quill feed with manual fine feed Motorized positioning of the Z-axis Motorized table feed of the X-axis Coolant system Machine lamp Gear head can be swiveled ± 60° Adjustable wedge strips Solid dovetail guide for the column, hand-scraped, for maximum stability and precision Height-adjustable, large-sized protective shield with microswitch Drilling depth stop Digital position display DRO 5 Drilling/tapping function Bledpfxeg U Uv Us Abpjp Solid and large-sized cross table, precisely surface-finished with T-slots and adjustable wedge strips Solid machine base made of cast iron with chip collection groove Single-stage, high-quality industrial electric motor Large speed range of 60 - 2,760 rpm through 2 continuously adjustable speeds Dimensions and weights Length approx. 1600 mm Width/Depth approx. 930 mm Height approx. 2110 mm Weight approx. 495 kg Drilling/Milling performance Arbor size max. 63 mm Shell mill size max. 26 mm Drilling capacity steel (S235JR) 24 mm Continuous drilling capacity steel (S235JR) 20 mm Electrical data Connection voltage 230 V Mains frequency 50 Hz Electrical connection Total connected load 1.5 kW Milling table, horizontal Length 800 mm Width 240 mm Distance Vertical spindle - Milling table max. 420 mm T-slot size 14 mm Number of T-slots 3 T-slot spacing 80 mm Standards and approvals Standard DIN EN 55011 EMC class C2 Travel X-axis manual 560 mm Y-axis manual 195 mm Z-axis manual 350 mm X-axis automatic 480 mm Vertical spindle Overhang 258 mm Spindle mount MK 4 Speed range 60 – 2760 rpm Number of speed ranges 2 Speed control Steuerung der Drehzahlregelung electronic Draw bar M 16 Swivel range milling head Z - X plane ± 45 ° Quill diameter 75 mm Quill stroke 120 mm Location: In stock at 54634 Bitburg - available immediately -

Condition: new, Year of construction: 2026, The robust design also allows for the processing of longer workpieces. The grinding unit can be swivelled, making it suitable for use as an edge grinding machine. Large, balanced belt pulleys (225 mm) ensure low-vibration operation. Simple adjustment of the grinding belt. High belt speed of 17 m/s. Reversible rotation (right/left). Upper grinding platen with graphite coating. Grinding shoe with 4-point suspension. Equipped with a movable grinding shoe for grinding angled surfaces. Smooth-running work table, even under heavy loads from large workpieces. Optimal price-performance ratio. Additional ESE equipment: Standard with electric table height adjustment. Split table that can be folded out for special edge grinding applications. Drawer-type grinding attachment. Integrated work table lighting. Equipment details: Bsdpeff Hdfefx Abpolp Large, balanced belt pulleys (225 mm) ensure optimal and low-vibration operation. Belt speed: 17 m/s. Equipped with a swivelled professional grinding shoe for grinding angled surfaces. 4-point suspension. Standard with electric table height adjustment. Controls ergonomically arranged on a separate control panel. Standard with drawer-type grinding attachment. Split table that can be folded out for special edge grinding applications. Dimensions and weights: Length approx. 3750 mm Width/Depth approx. 1250 mm Height approx. 1730 mm Weight approx. 520 kg Dust extraction connection. Dust extraction port diameter: 160 / 160 mm Work table(s): Work table height adjustment: 550 mm Work table traverse: 690 mm Electrical data: Power of height adjustment motor: 0.37 kW Power of drive motor: 3.0 kW Connection voltage: 400 V Phase(s): 3 phases Type of current: AC Mains frequency: 50 Hz Grinding unit: Grinding belt length: 7000 mm Grinding belt width: 150 mm Belt speed(s): 17 m/s Grinding shoe length: 270 mm Grinding shoe width: 150 mm

Condition: new, Year of construction: 2026, -TFON Lite SURFACER® Series The TFON Lite SURFACER® Series enables simultaneous processing of multiple parts, offering unmatched versatility through a range of consumable options and an efficient vacuum table system. Designed for ease of use, it features quick brush changes and the capability to mount two different brushes tailored to your specific applications. -With brushes mounted parallel to the table, the system guarantees flawless grinding performance with every use. Ergonomically engineered, the motor weight is supported by the machine frame itself, significantly reducing operator fatigue and improving workplace safety. -Backed by TFON’s trusted guarantee, the SURFACER® Series strikes the perfect balance between minimizing operational costs and maximizing finish quality. Key Specifications: Blsdpfx Asqzxhyjbpep -Minimum Material Size: 80 × 80 mm. Material Thickness: 3 – 200 mm. Maximum Material Width: 800 mm. Maximum Material Length: 500 mm

Condition: not inspected (used), Number of sanding units 4 St sanding width 190 mm Sanding height max. 4-180 mm weight 4200 kg Hess Expert 4-belt single wood sanding machine machine will be checked by our technicians Blsdpst Tqy Ejfx Abpjp ----- Ø Grinding at the bottom/top Ø With 2 offset grinding units each (bottom and top) Ø Grinding units (bottom and top) connected in series according to the Dressing principle Ø Pre-sanding with coarse grit (calibrate) Ø Regrinding with fine grit (finish) Ø Central motorized height adjustment of the lower grinding units Ø Central motorized and synchronous height adjustment of the entire upper Grinding and brushing units including the upper transport units Ø Oscillating sanding belt utilization (during the sanding process) Ø Absolute power connection thanks to 5.5 KW motors and large dimensions drive drums Ø Oxide ceramic grinding shoe for - exact surface geometry - no adjustment work - permanent dimensional accuracy - completely maintenance and wear-free Basic structure: Stable, heavy welded construction made of strong-walled rectangular profiles additional, statically calculated reinforcements for optimal Vibration dampening. Staggered grinding units with large dimensions Belt drive drums for slip-free belt running. Two-point suction for direct and flying dust with sealing brushes and integrated sanding belt blow-off Device to increase the service life of the sanding belts. Grinding units in heavy steel plate construction as the basis for vibration-damped, quiet tape running. Absolutely backlash-free guides as ball linear sets hardened and ground shafts. Height adjustment of the grinding units via hardened and ground special linear guides as well as pre-tensioned ones Guide carriage. Permanent precision thanks to dust and dirt protection Ball linear sets and guide carriages. Large-sized pre-grinding rollers as contact rollers. Contact rollers and Sanding shoes in a balanced ratio to the sanding belt grain load. The large drive drums guarantee full transmission the 5.5 kW drive power of the grinding motors on the sanding belt. Therefore Slip-free, stable running and optimal heat dissipation. This makes it the strongest Chip removal possible. Automatic machine stop activation in the event of a belt break. Visual display on the control panel and via flashing lights on the machine. Sanding shoes for finish completely maintenance-free and wear-free made of oxide ceramic with optimal heat dissipation. Grinding belt tension via appropriately sized compression springs. Sanding belt relaxation for belt changing using a pneumatic device sensitive, distortion-free placement of new tapes. Upper grinding unit and brush device centrally motorized Height adjustable with digital display in the control panel for the motorized Grinding thickness adjustment. Brushing and finishing device, for better surface finish, integrated into the basic machine. Two special brush rollers 150 mm Æ arranged one above the other in synchronous function for advance thrust. Separate height adjustment of the brush rollers on precise Carriage guides for post-correction of wear. Additional transport roller for Removal or further transport of the workpiece from the automatic grinding machine with the conveyor belt. Wooden guide in the inlet area for hard guide and bearings mounted on both sides pressure rollers. Safe transport of profiled workpieces on ca...

Condition: new, neu ca. 6 Monate ab Auftragse Taiwan 41800 € 798.38 € 65 - 2600 U/min ISO 40 420 x 220 x 380 mm 840 x 390 mm 2.2 kW 1600 mm 1700 mm 2000 mm 1145 kg 840 x 390 mm 1000 mm/min 5 14 x 63 mm 200 kg 420 mm 220 mm 380 mm 0 - 600 mm/min. 0 - 600 mm/min. 65 - 2600 90 - 310 mm 65 - 2600 +/- 90° ° 100 mm manuell 2,2 kW 950 x 250 mm 90 - 310 mm 100 - 480 mm swiveling operating panel 3 axes digital read out Fagor 40i Innova motor for horizontal- and vertical spindle: 2,2 kW feed motors with inverter for X/Y/Z: 0,35 / 0,35 / 0,75 kW ball screw spindles for X/Y/Z axes manual gear box for spindle speeds 1 pc. long milling arbor 27 mm 3 pcs. recustion sleeves (MK1, MK2, MK3) 1 pc. drawing bar ISO40 for horizontal or vertical spindle spindle protection with switch table safety guard with doors with switches outer arbor support for horizontal spindle LED work lamp automatic lubrication for X/X/Z guidways safety hand wheels for X/Y/Z axes coolant equipment with chip tray covers for X/Z axes level pads and bolts tool box with tools operating manual in English or German according to CE rules Bjdpfxewirdgj Abpelp

Condition: new, neu 00758 Polen 1500 € 1 The BISON 3544-200-5-P is a 3-JAW PRECISION FLAT-SPIRAL CHUCK with a diameter of 200 mm (8 inches) and an integrated size 5 Camlock short-taper mount in accordance with DIN 55029. The suffix ‘P’ (Premium/Precision) denotes the highest accuracy class (Class 1). KEY TECHNICAL FEATURES: * Chuck type: 3-jaw centring chuck (self-centring). * Body material: Robust, forged steel for high speeds and a long service life. * Mounting: Camlock Type D (DIN 55029), taper size 5. Mounting is carried out directly via the stud bolts on the machine spindle, without the need for an additional flange plate. * Accuracy class: Precision class (First Class Accuracy / Class 1). * Through-bore: Yes, with a clear passage of 55 mm. * Jaw type: One-piece, hard solid jaws. The scope of supply includes one set of drilling jaws and one set of turning jaws as standard. QUALITY FEATURES Bjdpfx Abozkvu Aopjlp * Durability: Hardened and ground working and guide surfaces ensure repeatability over the long term. * Smooth running: A balanced flat spiral reduces vibrations to a minimum at high speeds.

Condition: used, Asecos Fume extraction Weighing workstation with fresh air curtain Airflow testing according to DIN EN 14175-3 (5.4.4) Compliance with the prescribed occupational exposure limits Construction made of chemically resistant, plastic-coated fine steel sheet Vibration-free mounting option for an analytical balance on the granite block, which is isolated from the hazardous substance workstation No scattering of the weighing material due to the fresh air curtain in the front plane External dimensions (W x H x D): 1200 x 1300 x 850 mm Internal dimensions (W x H x D): 1180 x 1260 x 500 mm Condition: used Scope of delivery: (Asecos fume extraction unit) Bljdpezhmrmsfx Abpsp (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by telephone.

Condition: good (used), functionality: fully functional, Year of construction: 2026, overall weight: 1,400 kg, input voltage: 400 V, total length: 1,150 mm, total width: 900 mm, total height: 1,910 mm, OPEN 16T ECCENTRIC PRESS – THE MACHINE HAS MINOR DAMAGE AS SHOWN IN THE PHOTOS: THE ELECTRICAL CONTROL CABINET AND THE OIL DRIP TRAY ARE DENTED. Professional 16-ton eccentric press designed for punching, stamping, bending and forming metal components. The open back frame construction provides easy access to the working area and comfortable machine operation. The rigid and durable construction ensures stable operation even during intensive industrial use. The machine is equipped with a dry pneumatic friction clutch and modern safety systems. Main machine features: • Open back frame design • Rigid and durable construction • Fixed working table • Transversely mounted crankshaft • Horizontally mounted crankshaft • Dry pneumatic friction clutch • Lifting balance device • Safety valves • Manual control • High production efficiency TECHNICAL SPECIFICATIONS: • Pressing force: 16 t • Stroke under load: 2 mm Bodpfx Abozp I Tzspolp • Slide stroke: 0–70 mm • Number of strokes: 125 strokes/min • Maximum die height: 170 mm • Distance from slide block to frame: 170 mm • Working table dimensions: 320 × 480 mm • Table hole diameter: Ø100 mm • Opening dimensions: 160 × 240 × Ø210 mm • Slide dimensions: 180 × 200 mm • Shank hole size: Ø40 × 60 mm • Distance between columns: 220 mm • Table thickness: 60 mm • Maximum tilt angle: 25° • Motor power: 1.5 kW • Machine dimensions: 1150 × 900 × 1910 mm • Weight: 1400 kg Equipment: • Light curtains • Mechanical guards • Ejector in lower table Delivery conditions: • Delivery to customer possible • Shipping cost calculated individually • Used machine in good condition • 12-month warranty • Warranty and after-sales service • CE declaration of conformity Additional delivery information: • Delivery can be arranged throughout Europe • Shipping cost calculated individually depending on customer location • Fast order processing • Personal collection possible • Machine professionally secured for transport

Condition: used, Year of construction: 1992, Table dimensions 1100 x 880 mm Motor output 7,5 kW Spindle diameter 30 mm reus 3000/4500/6000/9000 U/min Weight 650 kg Year 1992 Used Machine Year of manufacture: 1992 Features and technical specifications: - Universal table milling machine for machining wood, plastic, and light metals. - Interchangeable MK5 milling arbor, secured for left/right rotation - Special ball bearings for high-speed operation - Special ribbed table with quill and additional dust extraction under the table. - Locking mechanism for tool change in any spindle position - Digital height indicator with 1/10 mm resolution and zero setting (optional) Blsdpfxezr Rq Ie Abpjp - Maintenance-free and dust-protected bevel gear feed mechanism: 1 revolution = 1 mm, stroke 130 mm - Central lubrication of both bearings and the feed spindle - SFM 101 control panel - Speed displayed visually and automatically - With automatic brake - Extremely fast belt change with automatic speed display - Machine table dimensions: 1,100 × 880 mm - Working height (table): 900 mm - Motor power: 7.5 kW - Speeds (VBG 7 visual display): 3,000 / 4,500 / 6,000 / 9,000 rpm - Max. height adjustment of the milling spindle: 130 mm - Safety interlock for high speeds - Milling spindle taper: MK 5 - Milling spindle, interchangeable: Ø 30 mm - A-weighted sound pressure level at ear level: L(A) 75 dB - Connection diameter: 2x120 mm - Air velocity: 24 m/s - Air flow rate at table: 680 m³/h - Airflow rate at the router fence: 1,060 m³/h - Dimensions: approx. 140 x 100 x 175 cm - Weight: approx. 700 kg

Year of construction: 2022, condition: used, For inquiries regarding the machine, please contact Mr. Herden at [phone number]. Weber CR 9 MDM Hatz Diesel Vibratory Plate / Year of manufacture: 2022 / Electric start / DEMO unit Selling price: €9,990.00 net / €11,888.10 gross Technical data Engine: Hatz Diesel Maximum engine power: 11.0 (15.0) kW/HP Weight: 740 kg Centrifugal force: 100 kN Frequency: 65 Hz Working width: 75 cm Blodpfx Abjznrtpjpep The reversible soil compactors in the CR series offer excellent compaction performance and maximum efficiency. They are therefore the first choice for compaction work, from classic road and civil engineering to paving. Balanced running characteristics, high running smoothness and low hand-arm vibration ensure a high level of operator comfort. - Precise, stepless, electro-hydraulic switching between forward and reverse direction via a fingertip control - Engine protection - Throttle cable and hydraulic switching protected and routed within the guide rod - Low hand-arm vibration - Fatigue-free working with the height-adjustable handlebar - Protection of the machine and engine by means of a protective frame and complete engine cover - Reduced maintenance effort thanks to the self-adjusting centrifugal clutch - Easy service, as all maintenance components are easily accessible - Safe and quick loading thanks to large, foldable crane eye - Secure lashing for transport thanks to additional eyelets in the engine console - Increased operator comfort thanks to electric start with operating hour counter, engine oil and battery voltage monitoring - Areas of application: road and civil engineering, trench construction, garden and landscape construction, sub-base for paving surfaces, compaction of paving and compaction of sand, gravel or aggregate We have a very large selection of different vibratory plates in our warehouse, which are immediately available! Please contact us for this at [phone number] / [email address]. Upon request, we will also be happy to provide you with a financing offer. We are an official Weber MT sales and service partner. We are an official JCB construction machinery sales and service partner. We are an official Westtech sales and service partner. We are an official Magni telehandler sales and service partner. We are an official DMS sales and service partner. We are an official Holp sales and service partner. We are an official OilQuick sales and service partner. We are an official Seppi M. sales and service partner. We are an official Mercedes-Benz sales and service partner. We are an official Iveco sales and service partner. In addition, with 800 used vehicles, we are one of the largest commercial vehicle dealers in Germany. We supply the complete Weber MT range for you! Errors and prior sale excepted! Internal No.: 080682 = Further information = Year of manufacture: 2022 New: Yes Unladen weight: 740 kg Engine brand: Hatz Please contact Marius Herden for further information.

Condition: refurbished (used), Overhauled Mazak main spindle for VTC 200 or VTC 300 for sale. The spindle has been fully overhauled, spindle bearings and intermediate sleeves have been replaced. The taper has been reground. Subsequently, it has been balanced. The maximum speed is 12,000 rpm. We have additional overhauled Mazak spindles in stock; feel free to send us your inquiry. This is an exchange spindle, meaning a core return is required. If you have any further questions, we are at your disposal. Bsdpfx Aevdkdisbpelp

Condition: new, neu ca. 12 Wochen ab Auftrags Italien 153200 € 2895.48 € 1350 mm 0,4 - 120 mm 1370 x 2200 mm 6000 m³/h 150 mm 6 bar 4200 mm 2300 mm 2350 mm 4200 kg WITH 2 WORKING STATIONS: 1 X GRINDING BELT UND 1 X BRUSH UNIT ON TOP * Machine made of stress-free welded steel construction for stable and rigid structure * Work table with motorised height adjustment via 4 synchronised spindles. * Independent drive motors for each work group. * Hoods for extraction inside the machine, one per station. Touch screen for: * Automatic star-delta connection of the main motors * Digital display for sheet thickness with decimal point tolerance * Material thickness adjustment (+/- 0.1 mm) * Machine condition monitoring with alarm messages FEEDING SYSTEM * Robust steel structure, wear-resistant surface. * Vacuum conveyor belt on request * The table raises and lowers from 780 mm to a maximum height of 950 mm above the floor. The power of the motor for height adjustment of the table is 0.25 kW. * Maximum permissible weight on the table: 140 kg. * Variable feed speed via frequency converter 0,4 to 4,5 m/min, Option 0,2 to 2,0 m/min or 0,6 bis 6,0 m/min. * Rubber conveyor belt, oil and temperature resistant. * Lateral guides to prevent the belt from lifting off. * Rubber pressure rollers in front and behind each station, oil and temperature resistant. * Automatic centring device for the conveyor belt * Automatic servo cooled motor * Speed motor on the main touch screen 1 TH R GROUP DEBURRING WITH ABRASIVE BELT * Rectified and balanced contact roller with 180 mm diameter. Coating of oil and heat resistant nitrile rubber. Standard roller hardness 55° shores. Mounted on an eccentric shaft that allows to control the working position and compensate the abrasive belt wear, with a range of 8 mm. This system is controlled by a pneumatic cylinder that allows the automatic insertion of the group into the work and, in case of emergency and/or machine stop, the immediate removal of the sanding belt from the working point. It is possible to insert sanding belts and/or Scotch Brite. * Pneumatic on-off switch. * Roller adjustment up-down "grain" stroke 10 mm Bsdpoynmw Rjfx Abpelp * Variable speed motor 11 kW with automatic braking in case of emergency. * Rotation speed in feed direction 4 - 18 m/s. * Width and duration of the oscillation setting. * Pneumatic tensioning system for the abrasive belt. * Sanding belt centring system, with electronic photocell, Oscillation adjustment in width and time. 2ND GROUP ROTATING BRUSH UNIT * 2 rows of vertical brushes, 4 rotating clockwise and 4 counterclockwise. * Each brush has a diameter of 350 mm and a length of 530 mm. * Motorised raising and lowering of the group to regulate the pressure of the deburring. * Variable speed motor 1,5 kW. * Variable speed group electronic inverter 6 - 12 U/min. * Brush motor with variable speed, power 6 kW (4 x 1,5 kW). From 300 to 900 U/min. * Speed programmable control and display on the electronic touch screen. CONTROL OF THE THICKNESS AND THE BRUSHES * Motorised table lifting with fine adjustment via 4 precision screws with ball bearings * Maximum operating pressure 120 mm * Pressure motor power kW 0,75 * Pressure adjustment via touchscreen CONVEYOR BELT CLEANING Brush system in nylon canvas for cleaning the conveyor belt (length 1350, Ø =150 mm), located at the back of the machine under th...

Condition: used, For inquiries regarding the vibratory plate, Mr. Herden will be happy to assist you (by phone). WEBER CR 8 MDM Hatz Diesel Vibratory Plate / New machine / in stock & immediately available Sales price: €10,790.00 net / €12,840.10 gross 3-year warranty Shipping available. The reversible soil compactors of the CR series excel with powerful compaction performance and maximum efficiency. They are the first choice for compaction work ranging from conventional road and civil engineering to paving applications. Balanced running characteristics, smooth operation, and low hand-arm vibrations ensure high operating comfort. CR 8 – The new top class: powerful, robust, and reliable: - Infinitely variable forward and reverse movement - Hydraulic shift for throttle cable and hydraulic switching integrated and protected within the guide bar - Low hand-arm vibrations - Fatigue-free operation thanks to height-adjustable guide bar - Protection of machine and engine through protective frame and fully enclosed engine cover - Reduced maintenance thanks to the self-tensioning centrifugal clutch - Easy service access as all maintenance elements are easily reachable - Safe and quick loading with a large, foldable lifting eye - Secure lashing for transport thanks to additional eyes on the engine console - Enhanced operator comfort with electric start and hour meter, including engine protection - Areas of use: road and civil engineering, trench construction, substructure for paving works, and compaction of sand, gravel, or crushed stone Technical Data Engine: Hatz Diesel Max engine power: 10.3 kW (14.1 HP) Weight: 605 kg Centrifugal force: 75 kN Frequency: 67.5 Hz Working width: 70 cm On request, we can also provide a financing offer. We are an official sales and service partner for: - Westtech - Gierking GMT Bjdpfx Aoym I Hwsbpolp - OilQuick - Weber MT - Holp - DMS - Seppi M. - Magni telescopic handlers - JCB construction machinery - Mercedes-Benz - Iveco With 800 used vehicles in stock, we are also one of the largest commercial vehicle dealers in Germany. We supply the complete Weber MT range for you! Errors and prior sale excepted. = Additional Information = New: Yes Engine brand: Hatz Contact Marius Herden for further information.

Condition: used, For inquiries regarding the vibratory plate compactor, Mr. Herden will be happy to assist you (via phone). WEBER CR 9 Hatz Diesel Vibratory Plate Compactor / Brand new unit / In stock & immediately available. Sales price: €12,990.00 net / €15,458.10 gross 3-year warranty Shipping available. The reversible soil compactors of the CR series stand out for their powerful compaction performance and maximum efficiency. They are the first choice for compaction jobs—from conventional road and civil engineering to paving applications. Balanced running characteristics, high smoothness of operation, and low hand-arm vibrations ensure excellent operator comfort. Bedpfx Aboym I H Depjlp CR 9 – The new top class: powerful, robust, reliable: - Precise, stepless electrohydraulic control for forward and reverse travel with tip-switch operation - Throttle and hydraulic switching protected inside the guide handle - Low hand-arm vibrations - Fatigue-free operation thanks to height-adjustable handle - Protection for machine and engine via protective frame and fully enclosed engine cover - Reduced maintenance thanks to the self-tensioning centrifugal clutch - Easy servicing as all maintenance parts are easily accessible - Safe and quick loading with large, foldable lifting eye - Secure lashing for transport with additional lashing eyes on the engine console - Increased operator comfort with electric start, hour meter, engine oil, and battery voltage monitoring - Areas of application: road and civil engineering, trench compaction, landscaping, substructure for paving, setting paving and compacting sand, gravel, or crushed stone - With compaction control and engine protection Technical Specifications Engine: Hatz Diesel Max. engine power: 11.2 (15.3) kW/PS Weight: 740 kg Centrifugal force: 100 kN Frequency: 65 Hz Working width: 75 cm On request, we can also provide a financing offer. We are an official Westtech sales and service partner. We are an official Gierking GMT sales and service partner. We are an official OilQuick sales and service partner. We are an official Weber MT sales and service partner. We are an official Holp sales and service partner. We are an official DMS sales and service partner. We are an official Seppi M. sales and service partner. We are an official Magni telehandler sales and service partner. We are an official JCB construction equipment sales and service partner. We are an official Mercedes-Benz sales and service partner. We are an official Iveco sales and service partner. Additionally, with 800 used commercial vehicles, we are one of the largest commercial vehicle dealers in Germany. We supply the complete Weber MT product range! Subject to errors and prior sale. = More Information = New: Yes Engine brand: Hatz Please contact Marius Herden for further details.

Condition: used, For inquiries regarding the vibrating plate, please contact Mr. Herden (by phone). WEBER CR 9 Hatz-Diesel Vibratory Plate Compactor / Brand New / In Stock & Immediately Available. Sales Price: €12,590.00 net / €14,982.10 gross 3-year warranty Shipping possible. The reversible soil compactors of the CR series stand out with their powerful compaction performance and maximum efficiency. They are therefore the top choice for compaction work in classical road and civil engineering as well as paving construction. Balanced running characteristics, high smoothness, and low hand-arm vibrations ensure a high level of operator comfort. CR 9 – The new premium class: powerful, robust, reliable: - Precise, stepless, electrohydraulic forward and reverse switching via tip control - Throttle and hydraulic switching are routed and protected within the guide handle - Low hand-arm vibrations - Fatigue-free operation thanks to height-adjustable guide handle - Machine and engine protected by protective frame and full engine enclosure - Reduced maintenance due to self-tensioning centrifugal clutch - Easy servicing, as all maintenance components are easily accessible - Safe and quick loading with large, foldable lifting eye - Secure lashing for transport thanks to additional lashing points on the engine console Blodpfxeym I Ibj Abpep - Enhanced operator comfort with electric start, hour meter, engine oil and battery voltage monitoring - Areas of application: road and civil engineering, trench construction, landscaping, sub-base preparation for paving, setting paving stones, and compacting sand, gravel, or crushed stone - With engine protection Technical Data Engine: Hatz Diesel Max. engine output: 11.2 kW (15.3 HP) Weight: 740 kg Centrifugal force: 100 kN Frequency: 65 Hz Working width: 75 cm We can also provide you with a financing offer upon request. We are an official sales and service partner for Westtech, Gierking GMT, OilQuick, Weber MT, Holp, DMS, Seppi M., Magni Telehandlers, JCB Construction Equipment, Mercedes-Benz, and Iveco. Additionally, with 800 used vehicles, we are one of the largest commercial vehicle dealers in Germany. We supply the complete Weber MT range! Errors and prior sale excepted. = Further Information = New: Yes Engine brand: Hatz Please contact Marius Herden for further information.

Condition: excellent (used), Technical data: • Cutting length: 3800 – 4500 mm • Cutting height: up to 115 mm • Main saw blade diameter: 400 mm (optional 430 mm) • Scoring saw blade diameter: 215 / 300 mm • Saw blade arbor: 75 mm (main saw blade), 50 mm (scoring saw blade) Bledpfx Absy Syauopjp • Speed: • Main saw blade: approx. 3695 rpm • Scoring saw blade: approx. 4565 rpm • Motor power: • 7.5 – 13.2 kW (50 Hz) • up to 15.9 kW (60 Hz) • Feed rate: 0 – 130 m/min • Return speed: 130 m/min • Air pressure: 5 – 6 bar • Air consumption: 10 – 30 l/min • Extraction: • Connection: 115 / 200 mm • Flow rate: 1215 – 3675 m³/h

Condition: new, Year of construction: 2026, NEW FLOTT SB 13 plus Pillar Drilling Machine - Spindle: B 16 (MK II additional charge €160 / Article no. 212504) - Tapping device - Control panel with OLED display - LED lighting - Rapidly adjustable and ergonomic drilling depth stop - Infinitely variable speed control via central rotary knob - Thermal overload protection - Spindle stop - Drill guard with electrical interlock - Continuous/normal drilling capacity (mm): 13/15 in E335/ST60 - Tapping capacity (depending on pitch): M10 - Drilling depth (mm): 60 - Throat depth (mm): 220 - Usable work surface (W x L) (mm): 300 x 250 - Rack-and-pinion table height adjustment - Infinitely variable spindle speeds (rpm): 40 – 4000 - Dimensions (mm): 420 x 540 x 1780 Bedpfx Absxrdrxjpelp For more TECHNICAL DATA, please refer to the product sheet! OPTION Drill Package 2 (296591) - €300.00 - [felix] 2.0 80 bench vice - Quick-action drill chuck B16 1-13 mm (accuracy 0.17 mm) - Taper arbor B16/MK II - Reducing sleeve MK II/MK I 3-year warranty for single-shift operation NOT THE RIGHT MACHINE? WE ARE AN OFFICIAL FLOTT PARTNER AND CAN OFFER YOU ANY PRODUCT FROM THE FLOTT RANGE! REQUEST A QUOTE!

Condition: new, Year of construction: 2026, SUPERTOOTH jaw plate set for Pegson XA400S / XR400S and Powerscreen 400 / R400 This listing is for a complete set of SUPERTOOTH-profile jaw plates. The set is suitable for the following jaw crusher models: Pegson XA400S Pegson XR400S Powerscreen 400 Powerscreen R400 The set consists of: Bodpsz Dudyofx Abpelp Fixed jaw plate — part number CR005-068-001C, weight 1000 kg. Swing jaw plate — part number CR005-067-001C, weight 1100 kg. Material composition: 18% manganese, 2% chromium, balance iron. The chemical composition has been verified using a spectrometer. Price per set, EXW Poland. Worldwide shipping can be arranged. Our range also includes other spare and wear parts: wedges, side plates (cheek plates), toggle plates, toggle seats, springs, hydraulic cylinders, hydraulic motors, hydraulic pumps, HFO, HPTO, HRC and BOWEX couplings, liners, grizzly bars and many other components required for routine repairs and complete overhauls of these machines. Only from us: the chemical composition of the castings is confirmed by a QUALITY CERTIFICATE and verified with a spectrometer. Do not choose cheaper, lower-quality castings — insufficient manganese or chromium content can reduce the service life of jaw plates by up to 50%! We offer the widest range of spare parts for crushers and screeners in Poland, covering both stationary and mobile machines. We supply parts for machines from manufacturers including: Brown Lenox, Bruce, DKT, Extec, Finlay, HARTL, Hazemag, PSP, DSP, Keestrack, Kleemann, Komatsu, McCloskey, Metso, MFL, Nordberg, Parker, Omega, Pegson, OM, Powerscreen, Premiertrak, Terex, Red Rhino, Rubble Master, Sandvik, SBM, Tesab and others.

Condition: new, Year of construction: 2026, Mantle and bowl liner set for Metso HP200 STD This listing is for a complete set of wear cones for the Metso HP200 STD cone crusher. Blodez Dulwjpfx Abpjp The set consists of: Bowl liner (outer cone) — part number N55208134-22, weight 550 kg. Mantle (inner cone) — part number N55308011-22, weight 482 kg. Material composition: 22% manganese, 2% chromium, balance iron. The components are manufactured from castings of the highest quality available on the market. Price per set, EXW Poland. Worldwide shipping can be arranged. Our range also includes other spare and wear parts: wedges, side plates (cheek plates), toggle plates, toggle seats, springs, hydraulic cylinders, hydraulic motors, hydraulic pumps, HFO, HPTO, HRC and BOWEX couplings, liners, grizzly bars and many other components required for routine repairs and complete overhauls of these machines. Only from us: the chemical composition of the castings is confirmed by a QUALITY CERTIFICATE and verified with a spectrometer. Do not choose cheaper, lower-quality castings — insufficient manganese or chromium content can reduce the service life of jaw plates by up to 50%! We offer the widest range of spare parts for crushers and screeners in Poland, covering both stationary and mobile machines. We supply parts for machines from manufacturers including: Brown Lenox, Bruce, DKT, Extec, Finlay, HARTL, Hazemag, PSP, DSP, Keestrack, Kleemann, Komatsu, McCloskey, Metso, MFL, Nordberg, Parker, Omega, Pegson, OM, Powerscreen, Premiertrak, Terex, Red Rhino, Rubble Master, Sandvik, SBM, Tesab and others.

Condition: new, Year of construction: 2026, Jaw plate set for Metso LT95 / C95 — large tooth, new type This listing is for a complete set of jaw plates for the Metso LT95 / C95 jaw crusher. The jaw plates feature a large-tooth profile and are manufactured in the new design. The set consists of: Fixed jaw plate — weight 868 kg. Swing jaw plate — weight 710 kg. Material composition: 18% manganese, 2% chromium, balance iron. Price per set, EXW Poland. Worldwide shipping can be arranged. Bedpoz Durkjfx Abpslp Our range also includes other spare and wear parts: wedges, side plates (cheek plates), toggle plates, toggle seats, springs, hydraulic cylinders, hydraulic motors, hydraulic pumps, HFO, HPTO, HRC and BOWEX couplings, liners, grizzly bars and many other components required for routine repairs and complete overhauls of these machines. Only from us: the chemical composition of the castings is confirmed by a QUALITY CERTIFICATE and verified with a spectrometer. Do not choose cheaper, lower-quality castings — insufficient manganese or chromium content can reduce the service life of jaw plates by up to 50%! We offer the widest range of spare parts for crushers and screeners in Poland, covering both stationary and mobile machines. We supply parts for machines from manufacturers including: Brown Lenox, Bruce, DKT, Extec, Finlay, HARTL, Hazemag, PSP, DSP, Keestrack, Kleemann, Komatsu, McCloskey, Metso, MFL, Nordberg, Parker, Omega, Pegson, OM, Powerscreen, Premiertrak, Terex, Red Rhino, Rubble Master, Sandvik, SBM, Tesab and others.

Condition: refurbished (used), Year of construction: 2022, functionality: fully functional, cutting height (max.): 155 mm, cutting width (max.): 1,250 mm, saw blade diameter: 450 mm, cutting length (max.): 3,450 mm, The machine has been completely overhauled by the manufacturer! TECHNICAL DETAILS Sawing unit Bljdpfx Aboz Irygepsp Cutting height: max. 155 mm Cutting height at 45°: max. 105 mm Saw blade diameter: max. 450 mm Saw blade arbor: 30 mm Swivel range: 0–46° Motor power: 5.5 kW Speed: 3,000 / 4,000 / 5,000 / 6,000 rpm Cutting range Cutting width: 1,250 mm Cutting length: 3,450 mm Sliding table length: 3,200 mm Cross slide and stops Digital folding stops: 3 Cross slide extendable up to: 3,500 mm Positioning accuracy parallel stop: 0.1 mm EQUIPMENT Scoring unit Auto-EPS with electromechanical side and height adjustment Electrically controlled parallel stop Electrically controlled axis adjustment Cross slide with 3 digital folding stops Machine completely overhauled by the manufacturer Sliding table completely re-adjusted Linear guide rail converted to a new digital system with 3 stops Stainless steel scale for angle adjustment renewed Cross slide checked 90° locking of the fence completely renewed Electrical system checked Machine re-adjusted, checked, and lubricated German-language documentation

Condition: excellent (used), Year of construction: 1972, functionality: fully functional, For sale: this gear hobbing machine. It is connected and can be tested. Comes with numerous accessories. Bljdpfjxwlthsx Abpop Technical specifications: Max. gear diameter: 7100 mm Gear width: 1500 mm Max. module: 45 Table diameter: 4000 mm Hob diameter x width: 400 x 500 mm Max. helix angle: 45 degrees Cutter diameter: 500 mm Cutter speed: 9–63 rpm Total power consumption: 47 hp Machine weight: 160,000 kg The machine has hydraulic workpiece balancing. A video of the machine can be sent via WhatsApp.

Year of construction: 2009, condition: ready for operation (used), travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 1,000 mm, total width: 9,000 mm, total height: 4,100 mm, product length (max.): 4,700 mm, spindle speed (max.): 1,450 rpm, number of axes: 3, This 3-axis DYE RHE -3000 Bed Type Milling Machine was manufactured in 2009. It features a substantial table surface of 1000 × 3000 mm, with longitudinal travel of 3000 mm and transverse travel of 1500 mm. The machine is equipped with a grinding wheel diameter of 450 × 80 mm and a spindle speed of 1450 rpm. If you are looking to get high-quality milling capabilities, consider the DYE RHE -3000 machine we have for sale. Contact us for further details. • Table surface: 1000 × 3000 mm • T-slots: 7 × 22 mm • Distance between T-slots: 130 mm • Longitudinal travel: 3000 mm • Transverse travel: 1500 mm • Vertical travel: 1000 mm • Vertical stroke: 300 mm • Grinding wheel diameter: 450 × 80 mm • Motor power: 10 HP • Control/display: Fagor NV300-6V • Machine dimensions: 4700 × 9000 × 4100 mm • Prism head: CTM 90 × 370 • Prism head speed: 3000 rpm • Prism head motor power: 3 HP Bsdpfx Absz Hwkbjpolp • Condition: Machine in operation Additional equipment • Balancing parallels • Wheel holders with grinding wheels • Coolant tank with paper filter • Hydraulic diamond dressers on head

Condition: new, Balance System 9SGJ025A050200, digitally controlled balancing head, serial number: B512879, unused, in opened original packaging, 100% functional, scope of delivery as shown in the photos. Bljdpfx Abei D T Dnopjp

Condition: new, The open-end wrench is used to loosen blade arbor screws in the wedge strips of planing cylinder arbors in thickness planers and jointers. The blade arbor wrench has been reduced to a thickness of 4.2 mm and should not be used for tightening or loosening screws securely. The wrench should be used to turn blade arbor screws in narrow slots without applying excessive force. Bsdpfx Aj Agcm Aebpolp Blade arbor wrench, slotted wrench 17 mm for planing cylinder arbors, blade arbors. Wrench width, open-end wrench size 17 mm, Wrench thickness 4.2 mm Overall length 155 mm Outer diameter 13 mm Galvanized DIN 894