Used Balancing Arbor for sale (1,407)

Condition: excellent (used), functionality: fully functional, pressing force: 160 t, table width: 1,600 mm, table height: 2,000 mm, Equipment: documentation/manual, KAEV Hydraulic Cutting System Available Complete KAEV hydraulic cutting system, originally used for die cutting acoustic composites and laminated automotive parts. 1. Hydraulic beam cutting press Four-column press with double-balanced yoke, self-lubricating bushings, column covers and two hydraulic cylinders integrated into the frame. The two-stage hydraulic pump provides fast approach and a slower, high-power cutting stroke. Hydraulic unit capacity: up to 300 litres; oil included. Features include automatic die-finding to set the lowest cutting point and infinitely adjustable return stroke. The control cabinet has a touch-screen panel and OMRON PLC, with scope for extensions and additional equipment. Standard software includes error indication, modem for internet connection, setup/manual/automatic modes and German/English interface. Protective covers and safety photocells are fitted. Technical data: • Cutting force: 160 t / 1,600 kN • Table/beam: 2,000 × 1,600 mm • Table height: approx. 950 mm • Daylight: 200 mm • Adjustable stroke: 15–180 mm • Stroke speed: 51 mm/s • Pump motor: 22 kW or 18 kW • Max. cutting oil pressure: 314 bar • Weight: approx. 16,000 kg 2. Pneumatic clamping beam feeder Bledpfx Ajz E S Ilshdep Rear-mounted feeder with one travelling beam pair for feeding material under the press and one pair for pulling and holding material. Feeding is driven by toothed belts and a frequency-controlled geared motor. The servo-driven pulling beams hold material securely and can reposition it backwards to a programmed position. PLC-controlled electro-pneumatic cabinet. Feed length is set at the touch-screen panel. Material is supported by a belt; the feeding area by a steel plate. Technical data: • Clamping width: 2,000 mm • Max. feed length: 1,600 mm • Beam opening: 60 mm • Beam speed: up to 800 mm/s, adjustable • Feed accuracy: ±1 mm • Pull-off force: 200 kp 3. Cutting pad shuttle unit The cutting pad moves in sync with material feeding to the front of the press, allowing convenient removal of cut parts. A linear drive and frequency-controlled geared motor move the shuttle frame. An automatic pad-shifting system connected to the cutting block changes the cutting position within a defined area, reducing repeated cuts in the same spot and extending pad life. A horizontal safety light curtain (approx. 1,200 mm) stops movement if the operator enters the shuttle area.

Condition: used, Year of construction: 2015, Overview Traditional-method finishing line for cava, champagne and other sparkling wines, from riddling and neck freezing through disgorging, dosing, corking and wire hooding to capsuling, labelling and case sealing. The machines are rated between 1,800 and 2,500 bottles/h. Two stainless steel tanks complete the offer. The line is sold as a whole; the gyropalettes and the two tanks are also available separately. Technical data - Product: sparkling wine, traditional method (cava, champagne) - Capacity: 1,800 to 2,500 bottles/h depending on the machine - Bottle formats: Bordeaux and Burgundy/cava - Years of manufacture: 1987 to 2018 - Electrical supply: 380-400 V, 50 Hz Blsdpfx Ahez E U D Nodop Scope of Delivery - Gyropalettes | ADRESSES INDUSTRIE | 504 S | for 504-bottle metal cages or 500-bottle packs, approx. 6,000 bottles per batch, control cabinet | 1998 - Balancer manipulator | DALMEC | PARTNER PMC | pneumatic, max. load 80 kg, bottle gripper head, unloads the cages into the neck freezer | 2005 - Neck freezer | TALLERES URPINAS | G+20 B | glycol/brine bath at -25 °C, touch panel, 2.28 kW, 380 V, 2,000 bottles/h | 2005 - Disgorging and dosing monobloc | PERRIER | crown cap removal, ice plug ejection, expedition liqueur dosing and levelling, approx. 50,000 bottles since the last general overhaul, original manual, 2,500 bottles/h | 1987 - Corker | AROL | GEMINI F | natural cork (mushroom) corking, single head | 2015 - Wire hooder | Robino & Galandrino | VITTORIA T 1/1 JUNIOR | monobloc with the corker, wire hood plaque feeder, inclined long-duration wire hood magazine, touch panel, 400 V, 50 Hz, original manual, 2,000 bottles/h; cork feeding and sorting hopper available as an option | 2015 - Bottle turner / homogeniser | FORNS | continuous, mixes the expedition liqueur into the wine, 2,500 bottles/h | 1987 - Washing, drying and blowing tunnel | CAMES | WDT-1 | exterior washing, high-speed Sonic air knives, 400 V, 50 Hz, 700 kg | 2018 - Capsule applicator | C.M.A.R. | capsule distributor with pleating and smoothing heads | 2001 - Labelling machine | PRIMA INDUSTRIES | PLM 1500 | self-adhesive, 3 label stations plus neck collar, capsule orientation with spot and UV sensors, SICK photocells, star wheels for 75 mm (Bordeaux) and 89 mm (Burgundy/cava) bottles, 3 kW, 400 V, 1,800 bottles/h | 2018 - Case sealer | SIAT | SK2-S | top and bottom adhesive tape sealing, 380 V, 3-phase | 2015 - Tank with agitator | DECALSA INDUSTRIAL | 12,200 L, agitator, heating and cooling coils, control box | 1988 - Tank | MAGUSA | DPG | 10,000 L, AISI 304 | 2000 Condition Used, still installed and in production. Regularly maintained; most machines have had one owner since new. Availability Available now. Inspection possible. Location: Spain.

Condition: used, Year of construction: 2002, machine/vehicle number: CA83, Used ROBINO & GALANDRINO monostadio z 8 t capsuling machine- Year 2002Technical Specifications & Performance DataThis Single-stage Capsuling Machine Z 8 T by Robino & Galandrino is a robust solution for capsule application on glass bottles, engineered for wine and sparkling wine producers seeking reliable performance in a second hand, used bottling line environment. Built with Italian precision, it offers consistent capsuling quality and seamless integration into industrial packaging and beverage production workflows.Manufacturer: Robino & GalandrinoModel: Z 8 T (Monostadio)Year: 2002Configuration: Single-stage capsulingNo. of heads: 8Capsule types: PVC shrinkable plastic; Champagne/sparkling wineRotation direction: CounterclockwiseOptical centering: Not equippedContainers: Glass bottlesCompliance: CE markedAdvanced Automation & Control SystemsDesigned for dependable operation within professional bottling equipment setups, this capsuling machine supports stable, repeatable processes. Its single-stage architecture simplifies adjustments and minimizes changeover time. Operator functions are straightforward, ensuring efficient routine operations. Standard machine protections and CE conformity support safe use on modern production floors.Streamlined controls for routine start/stop and adjustmentsQuick changeovers aligned with single-stage designMechanical alignment without optical centering for robust, low-maintenance operationSafety guarding consistent with CE conformityProduction Line Integration CapabilitiesThe Z 8 T integrates easily as a standalone station or inline within a complete used bottling line. It accepts upstream glass bottle handling and passes consistently capped bottles downstream to labeling or inspection modules, supporting flexible industrial packaging layouts.Inline or standalone operationCompatible with standard glass wine bottle handling conveyorsSuitable for integration after corking/capping and before labelingCapsule application for both PVC shrink and sparkling wine formatsMachine Condition & Maintenance HistoryThis machine is currently in storage, making it available for rapid deployment into beverage production environments after routine commissioning. The overall configuration, CE conformity, and preserved components provide a solid foundation for reliable second hand operation.Current status: In storageCE marked unitSingle-stage, 8-head layout preservedOperational Performance & VersatilityOptimized for wine sector applications, the Z 8 T manages both PVC shrink capsules and champagne/sparkling wine formats. Its counterclockwise carousel and 8-head configuration deliver balanced throughput for small to mid-scale wineries and beverage producers.Ideal for Wine and sparkling wine productionConsistent application of PVC sh... Bjdpfx Ajz E Dhwshdslp

Condition: used, machine/vehicle number: TP121, Used AROL 8 head capping machine - 16000 BPHTechnical Specifications & Performance DataThis rotary capping machine is engineered for high-efficiency closure application on PET bottles across beverage and food sectors. Manufactured by Arol, it features an 8-head rotary configuration designed to deliver stable throughput and precise cap application at industrial speeds. Its compact footprint and ergonomic working height support streamlined operation within modern bottling equipment layouts and industrial packaging environments.Manufacturer: ArolMachine type: Rotary Capping MachineModel: 8 testeNo. of capping heads: 8Maximum speed: up to 16,000 bphContainer material: PETNeck/closure specification: 38 mm threadRotation direction: CounterclockwiseTransfer type: Body handlingMaximum bottle height: 320 mmWorking table height (H): 1200 mmElectrical supply: 400 V, 3 PH, 50 HzAdvanced Automation & Control SystemsBuilt for consistency and reliability, this rotary capper supports precise application of 38 mm plastic screw closures on PET containers. The 8-head turret ensures uniform torque distribution and repeatable performance across sustained production runs. The electrical configuration (400 V, 3-phase, 50 Hz) aligns with common industrial power standards, facilitating straightforward integration with existing control panels and line PLCs. Quick format adjustments and operator-friendly settings help reduce changeover times and improve uptime in beverage production and industrial packaging operations.Production Line Integration CapabilitiesThe machine integrates seamlessly into a used bottling line or a new installation as a standalone capper. Counterclockwise rotation and body-handling transfer allow smooth infeed/outfeed with standard conveyors. A cap elevator is available as a separate option to automate cap feeding and maintain continuous operation. Bottle handling supports PET formats within a height range up to 320 mm, enabling multi-product flexibility across water, soft drinks, wine, beer, milk, and oil lines.Machine Condition & Maintenance HistoryThe unit is ready for operation. It has been overhauled and is offered with a 6-month warranty. Supplied with compatible spare parts, it is presented in ready-to-use condition and available on an “as seen and approved” basis—ideal for facilities seeking a dependable second hand capper with minimized commissioning time.Operational Performance & VersatilityDesigned for PET containers with a 38 mm threaded neck, this rotary capper suits a wide scope of beverage and food applications. It is an excellent fit for water (still and sparkling), soft drinks (CSD), wine, beer, milk, and edible oil. The 8-head configuration balances speed and gentle handling, maintaining product integrity and closure quality at up to 16,000 bottles per hour. Its industrial-grade build and precise head motion support consistent sealing performance within demanding production schedules.Installation Re... Bedpfx Ahsz E Dkrodslp

Condition: used, total length: 3,450 mm, total width: 2,200 mm, total height: 1,500 mm, Year of manufacture: 2004 Colour: Green Weight: 1.500 kg - Year: 2004 - CE marking present: Yes - Serial number: - Main motor power [kW]: 5.5 - Parallel stop displacement [mm]: 1350 - Roller table length [mm]: 3400 - Table width [mm]: 1450 - Min. saw blade diameter [mm]: 200 - Max. saw blade diameter [mm]: 450 - Arbor saw blade diameter [mm]: 35 - Dust extraction nozzle diameter [mm]: 115 - Controlled axes: Tiltable, Rip fence, Scoring unit height, Scoring unit lateral adjustment, Cutting height - Electrically adjustable axes: Rip fence, Cutting height, Tiltable, Scoring unit lateral adjustment, Scoring unit height - Spindle speed: Manual - └ Min. spindle speed [rpm]: 3000 Bledpfx Aho Aazbkodjp - └ Max. spindle speed [rpm]: 6000 - └ Spindle speed control: Incremental - Schuinstelbare zaagaggregaat: - └ Min. tilt adjustable [°]: -3.1 - └ Max. adjustable [°]: 43.8 - Voltage [V]: 400 - Current consumption [A]: 13.5 - Fuse [A]: 16 - Power [kW]: 7.0 - Transport dimensions: 3450mm x 2200mm x 1500mm (l x w x h) - Transport weight [kg]: 1500kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: excellent (used), functionality: fully functional, travel distance X-axis: 800 mm, travel distance Y-axis: 230 mm, travel distance Z-axis: 400 mm, spindle speed (max.): 1,800 rpm, spindle speed (min.): 40 rpm, Universal milling machine, CME model FU1S, table size 1100mm x 240mm, longitudinal travel 800mm, transverse travel (Y-axis) 230mm, vertical travel (Z-axis) 400mm, with ram, Huron-type spindle with ISO 40 mount, spindle speeds from 40-1800 rpm, total power 3.75 kW, with steady rest and arbor, with digital readouts, with new mechanical vise, 160mm wide, manufactured in 1992, original paint. Bedpfxjz Tc Its Ahdelp

Condition: good (used), functionality: fully functional, travel distance X-axis: 1,400 mm, travel distance Y-axis: 630 mm, travel distance Z-axis: 500 mm, quill stroke: 100 mm, overall weight: 7,000 kg, Equipment: documentation/manual, X-axis travel: 1.400 mm Y-axis travel: 630 mm Z-axis travel: 500 mm Table dimensions: 1.800 x 630 mm Max. table load: 1.500 kg Spindle taper: ISO 50 Spindle speed range: 45 tot 2.240 rpm Bodpfx Asz Tdhuehdslp Featured with: - Heidenhain Positip DRO - Vertical/Horizontal milling head - Horizontal milling arbor support - Horizontal milling arbors - Manual spindle quill 100 mm - Coolant system - Machine user manuals

Condition: repair required (used), Storti PGS 2000 saw carriage Storti TGS 78 panel saw Storti centering device Bedpfx Asz Szfzehdelp A.COSTA LEOPARD two-arbor track saw Feed rollers and outfeed rollers included

Condition: new, functionality: fully functional, fuel type: gas, fuel tank capacity: 70 l, color: red, empty load weight: 117 kg, axle configuration: 1 axle, emission class: none, mast type: other, brakes: other, Year of construction: 2026, Equipment: low noise, TICAB BPM 100 | Hand-Push Crack Sealing Machine for Asphalt Repair & Maintenance The TICAB BPM 100 is a professional hand-push crack sealing machine designed for efficient asphalt crack filling, joint sealing, pothole edge repair, and preventive road maintenance. Compact, reliable, and easy to operate, it is the perfect solution for both urban and industrial pavement repair works. Engineered for contractors, municipalities, and road maintenance crews, the BPM 100 ensures precise application of hot bitumen, crack sealant, or asphalt mastic, helping extend pavement service life and reduce long-term repair costs. Key Features ✔ 70 L tank capacity for bitumen, crack sealant, or asphalt mastic ✔ Efficient heating system (diesel or propane) ensures stable and consistent material temperature ✔ Hand-push design for excellent maneuverability and easy operation in confined areas Bljdpfx Ajx U Atvshdep ✔ Durable construction for intensive daily use in demanding environments ✔ Fast heating and ready-to-use performance for quick jobsite deployment ✔ Compact size ideal for urban maintenance and small repair teams Ideal Applications • Asphalt crack sealing and joint repair • Driveways, sidewalks, and bike paths • Parking lots and industrial pavements • Municipal streets and highways • Pothole edge reinforcement • Preventive road maintenance programs • Small and medium-scale asphalt repair works Built for Professional Road Maintenance Its precise heating and application system ensures high-quality sealing, preventing water penetration and further pavement deterioration. The TICAB BPM 100 is widely used by road contractors and municipal services looking for a reliable and cost-effective solution for asphalt maintenance. Why Choose TICAB BPM 100? • Simple operation with high productivity • Reliable heating system for consistent material performance • Compact and mobile design for any jobsite • Reduced maintenance costs and long service life • Professional results for crack sealing and asphalt repair The BPM 100 is the perfect balance between efficiency, mobility, and durability for everyday road maintenance tasks. Request a Quote Today Contact us for pricing, delivery options, and technical specifications. TICAB BPM 100 is available for fast production and worldwide shipping.

Year of construction: 2021, condition: refurbished (used), Spindle motor, completely overhauled for JUNG HF50 / JF520. Electrically overhauled / new bearings installed and balanced. Exchange delivery possible, depending on availability. Bjdpjhcn Spsfx Ahdelp

Condition: new, Balance Systems Digital Interface Balancer 9SHVM2512B N220, circuit board, serial number B803704, unused, 100% functional, scope of delivery as shown in the photos. Bjdpfx Aoi D T Dgjhdelp

Condition: used, Year of construction: 2023, Max. cutting width: 4600 mm Bledpfx Ahs Agw H Tjdjp Max. cutting height, horizontal: 1958 mm Max. cutting height, vertical: 2070 mm Max. processing thickness: 60 mm Saw blade diameter: 250 mm Motor power: 4 kW Saw blade arbor: 30 mm Bottom support: fixed rollers Material support: aluminum lath grid with plastic pads Small parts support: yes Measuring system: scale Saw head swivel: manual Mounting: free-standing Extraction: external extraction required Weight approx.: 910 kg Extraction diameter: 2x100 mm Storage location:

Condition: good (used), functionality: fully functional, Robust RAPID PK 100 table saw in a solid design, featuring a sliding table and adjustable fence system. Bsdpjz Eh Nrofx Ahdslp The saw blade can be tilted up to 45°. With a saw blade diameter of 250 mm, the maximum cutting height is approximately 75 mm. The cutting width to the right of the saw blade is approximately 600 mm. The saw arbor is driven by a narrow V-belt. A saw blade is included in the scope of delivery. Technical data: Motor power: 3 kW Three-phase motor, protection class IP54 Motor speed: 2,860 rpm Saw arbor drive via narrow V-belt Saw arbor speed: 5,200 rpm Table size: approximately 850 × 700 mm Cutting width to the right of the saw blade: approximately 600 mm Cutting height: approximately 75 mm with a Ø 250 mm saw blade Saw blade can be tilted up to 45° Dust extraction port on the rear of the machine: Ø 100 mm Dimensions: approximately 800 × 1,200 × 1,400 mm Weight: approximately 250 kg Equipment: Sliding table Length/cross stop with scale Parallel fence Tiltable saw blade up to 45° Dust extraction connection Ø 100 mm Includes saw blade The machine can be inspected and tested under power after arranging an appointment. Transport is possible for an additional charge! The machine will be inspected before sale. For used machines with a year of manufacture of 2009 or earlier, the warranty is excluded when sold to commercial customers. Technical data and equipment may vary. Errors, prior sale and changes are subject to change. All information is without guarantee.

Condition: refurbished (used), Year of construction: 1990, machine/vehicle number: 831102, functionality: fully functional, power: 3.4 kW (4.62 HP), input voltage: 400 V, input current: 16 A, input frequency: 50 Hz, type of input current: three-phase, cutting height (max.): 480 mm, cutting width (max.): 780 mm, control type: manual, actuation type: manual, rotational speed (max.): 700 rpm, rotational speed (min.): 1,400 rpm, total height: 2,460 mm, total length: 1,490 mm, total width: 900 mm, overall weight: 720 kg, table height: 970 mm, year of last overhaul: 2026, roll diameter: 800 mm, saw blade length: 5,600 mm, Equipment: documentation/manual, motor brake, Dear customers, we currently offer a fully overhauled bandsaw from the HEMA brand. The machine has been repainted in new, current original colors, and the electrical system, including the emergency stop system, is completely new. Mechanical parts were either purchased from the original manufacturer or manufactured in-house. The motor has been completely overhauled. Here are some additional technical specifications of the machine: - Precision roller guide at the top and bottom, upper guide height-adjustable via handwheel, vibration-damping wheel suspension - New aluminum disc wheels with vulcanized and ground rubber linings, dynamically balanced - Stand – LEFT-hand version - With precision table swivel device with handwheel and rack and pinion Blsdpfx Ahjz Eh S Tedjp - Pole-changeable motor with 2 cutting speeds, safety brake, and brake air system - Emergency stop switch with undervoltage release - Aerodynamically optimized extraction port The scope of supply includes a set of saw blades from HEMA and other machine-specific accessories. Price plus VAT, which will be shown separately on the invoice. Free and insured shipping throughout Germany! If you have any questions, please do not hesitate to contact us.

Condition: used, Universal external and internal cylindrical grinding machine CINCINNATI - MSO, Type R75 Serial No. 27782, Year of manufacture 1976 Center distance max. 805 mm Workpiece grinding length max. 800 mm Center height 130 mm Swinging diameter max. 250 mm Workpiece grinding diameter max. 250 mm Workpiece weight between centers max. 75 kg Workpiece weight in chuck max. 20 kg Workpiece spindle speed 50 - 390 rpm Tailstock internal taper MK 5 Tailstock short taper flange DIN 55027, Size 5, Ø 82 mm Tailstock spindle bore 38 mm Headstock internal taper MK 3 Grinding wheel diameter max. 300 mm Grinding wheel width max. 40 mm Bsdpfx Ajz Ek Siohdjlp Grinding wheel peripheral speed 30 m/sec Tailstock quick traverse 50 mm Automatic tailstock feed 0.005 to 0.03 mm Manual feed 0.0025 mm Hydraulic table movement 0.05 - 6 m/min Motor power grinding spindle 3 kW Motor power workpiece spindle 0.75 kW Motor power internal grinding attachment 0.75 kW Power connection 380 Volt, 50 Hz - Feed and plunge system, manual or automatic feed - Grinding spindle swivels +/- 90° - Workpiece spindle swivels 0 to 90° - Table tilt for taper grinding up to 10° - Counter support / quill for the workpiece spindle with internal taper MK 3 - Internal grinding spindle missing, internal grinding attachment for swiveling - Coolant system adjacent - 1 diamond grinding wheel dresser - 3 grinding wheels with grinding wheel arbors - 1 grinding wheel without grinding wheel arbor - 1 grinding wheel puller - 1 reducing sleeve - 3 centering pins - Several drive dogs - Operating manual with electrical diagram Space requirement L x W x H 2350 x 2000 x 1600 mm Weight 2500 kg Good condition

Condition: new, neu ca. 2 - 4 Wochen ab Auftr Polen 995 € 23 mm 19 mm Weldon 1.15 kW 331 mm 254 mm 456 mm 155 kg 23 mm 50 mm 50 mm 160 mm 240 / 480 U/min 6 mm PRO-50 featuring purpose designed motor and 2-speed gear box 240/480 rpm is optimized to provide appropriate speed for work with HSS cutters up to ? 45 mm and twist drills up to ? 23 mm. Rigid construction, optimized by means of FEA (finite element analysis) software extends tool life and enables depth of cut up to 75 mm. Compact design along with innovative smart magnet with reduced weight make it a lightweight machine. PRO-50 provides maximum holding power on thin materials thanks to Magnetic Field Shape Control (MFSC). The drill protects both the machine and the operator from work on too thin work piece by means of Magnetic Power Adhesion Control (MPAC). PRO-50 is also equipped with Energy Saving Base (ESB) that uses only 50% of its power when motor is not running. Features and benefits: • Compact design with excellent ratio weight/power • Purpose designed motor • Motor Speeds 240/480 rpm (under load) • Spindle equipped with MT2 • Innovative smart magnet with reduced weight • Rigid design to extend tool life • Large stroke enables the use of long tools • Motor cable with additional protective cover • Magnetic Field Shape Control (MFSC) provides maximum holding power on thin materials • Magnetic Power Adhesion Control (MPAC) detects adhesive force of electromagnetic base and protects both the machine and the operator from work on too thin work piece • Energy Saving Base (ESB) uses only 50% of its power when motor is not running Standard shipping set: • Drilling machine • Plastic box • Handle (3pcs) • MT2 arbor with 19 mm (3/4”) Weldon tool holder • Safety strap • Cooling system • Protective spring for cooling system hose • MT2 drift • 2.5 mm hex wrench Bodpsyrhp Nsfx Ahdelp • 5 mm hex wrench • 5 mm hex wrench with a handle • 8 mm combination wrench • Operator’s manual OPTIONS (PRICES ON REQUEST): Pipe adjustment Pressure cooling system Vacuumpad Vackuumpump Compressed air ejector

Condition: new, functionality: fully functional, Year of construction: 2026, overall weight: 900 kg, loading space width: 2,400 mm, loading space length: 5,000 mm, loading space height: 2,600 mm, Villex Medium Cube Nero 1.0 – Plenty of space. Many possibilities. The versatile 5-meter container! Are you looking for a compact, highly functional, and modern space solution? The Villex Medium Cube Nero 1.0 from Villex Container GmbH impresses with its optimal intermediate size of 5.0 meters in length and offers the perfect balance between space and flexibility. Whether as an office container, construction container, break room, mobile home office, or storage extension – the elegant anthracite-colored panels and matching base frame in RAL 7016 give the container an all-around elegant and contemporary look. Inspection and collection are possible at any time by arrangement. 🔹 HIGHLIGHTS & DATA AT A GLANCE Model: Villex Medium Cube Nero 1.0 Manufacturer: Villex Container GmbH Condition: New & ready for immediate use External dimensions: 5.00 m x 2.40 m x 2.60 m (L x W x H) Weight: approx. 900 kg (particularly easy to transport & flexible to relocate) Color: Elegant base frame & panels completely in anthracite (RAL 7016) Construction: Robust steel construction – extremely durable & stable Insulation: 50 mm thick insulation for a comfortable indoor climate (suitable for year-round use) 🔹 EQUIPMENT & ELECTRICAL SYSTEM Door: 1x sturdy steel door (secure, durable & weatherproof) Windows: 2x standard windows (each 1,000 x 1,000 mm) for plenty of natural light Electrical system (complete package): External connection: 32A CEE plug (power supply) 3x double sockets for workplaces, tools & electrical appliances 2x LED lights for optimal room illumination 1x light switch & fuse 🛠 CUSTOM MANUFACTURING & SPECIAL REQUESTS POSSIBLE Do you need individual adjustments, additional sockets, or sanitary options? We also manufacture containers precisely to your specific requirements! 🚚 DELIVERY & PAYMENT PROCESSING Delivery: Fast, nationwide delivery with our own special vehicles / crane truck Delivery time: In-stock standard models: approx. 1–2 weeks Individual special design: approx. 4–6 weeks Payment options: PayPal Bank transfer (advance payment) Bjdpfx Asz Irwxjhdslp 📞 REQUEST A NON-BINDING OFFER NOW! Get free advice! Write to us directly via online advertisement or call us – we will create your individual offer. (Villex Medium Cube Nero 1.0, office container 5m, construction container 5x2.4, room module, modular construction, living container, break room, anthracite RAL 7016, construction site container, compact container, lightweight container 900kg, Villex Container GmbH)

Year of construction: 2023, condition: ready for operation (used), travel distance X-axis: 1,000 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 500 mm, controller manufacturer: SIEMENS, overall weight: 5,500 kg, total width: 2,840 mm, total height: 2,700 mm, product length (max.): 5,440 mm, table length: 1,000 mm, table width: 500 mm, number of axes: 3, This 3-axis KNUTH HFS 50100 F NC was manufactured in 2023. It features a magnetic table measuring 1000 mm x 500 mm and a powerful total power of 14 kW. The machine includes a coolant system with a paper belt filter and magnetic separator, along with essential accessories such as grinding wheel flanges and precision vises. If you are looking to get high-quality surface grinding capabilities, consider the KNUTH HFS 50100 F NC machine we have for sale. Contact us for further details. Bsdpoz D Tb Rjfx Ahdolp - Control: Siemens Smart Line Touch- Magnetic table: 1000 mm x 500 mm- Total Power: 14 kW- Voltage: 400 V- Frequency: 50/60 Hz- Grinding wheel size: D350 x 40 mm- Coolant System: Coolant system with paper belt filter and magnetic separator- Included Accessories: 2x grinding wheel flanges, grinding wheel dresser, balancing stand with balancing shaft, 1x Röhm precision vise (PL-120S), 2x Röhm precision vise (PL-70S), hydraulic oil (approx. 80 L in canister)- Documentation: Complete machine documentation and service reports available

Condition: used, Year of construction: 2021, operating hours: 198 h, Equipment: all wheel drive, Komatsu WA 70M-8E0 Wheel Loader | Year of Manufacture 2021 | Only 198 Operating Hours | Top Condition Vehicle Data: * Manufacturer: Komatsu * Model/Type: WA 70M-8E0 * Category: Wheel Loader Bodpfs Aa Eq Aex Ahdjlp * Year of Manufacture: 2021 * Operating Hours: 198 hrs * Power: 46.2 kW (approx. 63 hp) * Color: Yellow * Permissible Total Weight: 6,000 kg * Axles: 2 * Tires: 15.5/60-18 (Tread Depth: Axle 1: 50%, Axle 2: 50%) Equipment & Highlights: * Attachments included: Pallet forks + Original Komatsu bucket (Type: 42U-70-40110) with 0.85 m³ capacity * Comfort & Cabin: Integrated radio with USB connection for comfortable operation * Tire Condition: Approximately 50% tread remaining all around (Size 15.5/60-18) * Special Features: Emissions class "Low Noise" - ideal for use in urban or noise-sensitive areas. ----For sale is an absolutely new and well-maintained Komatsu WA 70M-8E0 wheel loader from the year 2021 with extremely low operating hours of only 198! The machine is in excellent optical and technical condition and is ready for immediate use for your next project. With a permissible total weight of 6,000 kg and a powerful 46.2 kW engine, the wheel loader offers the perfect balance between compactness and strong lifting power. The machine can be inspected and tested on our premises after prior arrangement. We look forward to your contact if you have any questions or are interested!----New main inspections / safety checks or weight reductions/increases are possible upon request. We will gladly assist you in obtaining export/transfer license plates, and we can also arrange for the transfer of your purchased vehicles within Germany. Contact us!----We speak the following languages: German, English and Russian!----No liability for printing and typesetting errors, changes, prior sales and errors reserved!----Who are we? Leible Nutzfahrzeuge is a family-owned company based in Kehl am Rhein. Thanks to our many years of experience in the processing and sale of commercial vehicles, we are a reliable partner for customers worldwide. The particular strength of Leible Nutzfahrzeuge lies in the sale of new and used commercial vehicles. A large variety of vehicles can be found on 11,000 m². Our corporate philosophy is characterized by fairness and seriousness. As customer satisfaction is very important to us, we offer our customers an excellent all-round service package and provide them with a competent contact person who will assist them in the purchase or sale of vehicles. Convince yourself! Our service for you: Loading of vehicles We will gladly assist you in loading your purchased vehicles. Organization of special transports We will gladly assist you in organizing special transports. Day licenses / export license plates We will gladly assist you in obtaining export license plates/short-term license plates. Handling of customs formalities We will gladly assist you in handling customs matters.

Condition: used, Year of construction: 2026, machine/vehicle number: 0101-260040, BEHRINGER EISELE VMS 350 – Vertical Metal Cutting Circular Saw The BEHRINGER EISELE VMS 350 is a robust, manually operated industrial metal cutting circular saw for precise cutting of steel pipes, profiles, and solid materials. The powerful worm gear with EISELE rotational balancer ensures low-vibration sawing, high cutting quality, and long saw blade life. The precise miter adjustment, simple operation, and integrated coolant system make it a reliable circular saw for steel construction, metalworking, and workshops. Key technical data: Saw blade diameter 350 mm Motor power 1.4 / 1.9 kW Speeds 17/34 or 34/68 rpm Cutting range 90° round Ø 120 mm Cutting range 90° rectangular 170 × 100 mm Cutting range 45° round Ø 120 mm Miter adjustment Up to 45° on both sides, 30° to the right Bsdpfx Ahs Afagcsdelp Material clamping / Feed Manually Dimensions (L × W × H) 895 × 665 × 1,750 mm Weight approx. 300 kg

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, rotary table diameter: 450 mm, position of the milling head: Schwenkbar (45°), table diameter: 450 mm, total length: 5,600 mm, gear diameter: 500 mm, total height: 3,100 mm, total width: 3,600 mm, input frequency: 50 Hz, type of input current: three-phase, spindle speed (max.): 340 rpm, table bore: 125 mm, spindle speed (min.): 80 rpm, travel distance X-axis: 325 mm, travel distance Y-axis: 200 mm, travel distance Z-axis: 400 mm, overall weight: 14,800 kg, distance table to spindle center: 350 mm, tool diameter: 200 mm, controller manufacturer: Siemens Sinumerik 840D sl, drive type: Sinamics S120, control type: CNC control, Equipment: documentation/manual, rotational speed infinitely variable, A Pfauter PE 500 for the economical production of straight and helical spur gears up to module 12 and 500 mm in diameter – completely overhauled by SerWeMa with Siemens Sinumerik 840D sl, equipped with a gripper unit and a 32-position workpiece storage for unmanned operation. The machine is ready for operation in our hall in Chemnitz: you can inspect it under power, and if desired, we will mill your own sample part and you can take delivery of the machine here. No delivery time, no risk. Sold by Serwema Retrofit Solutions, the company that carried out the overhaul and knows the machine inside out. The general overhaul included complete geometric overhaul by grinding and scraping, new roller bearings in the main drive and in the milling head, measuring and reconditioning the worm gear, overhauled or new ball screw drives, overhaul of hydraulics, lubrication and coolant system, and new electrical equipment with Sinumerik 840D sl, Sinamics S120 and new axis motors. An electronic generating gear controls all generating and single-part machining processes, and an NC-controlled crash recovery protects the tool and workpiece in the event of a power or phase failure. New paint in RAL 7035/5015 with oil and coolant resistant two-component paint, acceptance of geometry according to SerWeMa protocol based on DIN ISO 6545. Bljdpfxoz Et E Ee Ahdsp The machine controls six CNC axes: X radial, Y tangential, Z axial, A milling head swivel, B milling cutter drive and C table drive. The SerWeMa gear cutting software guides you through workpiece and tool data via masks, without the need for programming: up to three position-oriented gearings per workpiece, each with its own tool, up to three cuts per gearing with simultaneous or counter-rotating movement, form corrections for convex, conical and convex-conical profiles, lead-in and lead-out phase correction, chamfer milling, dimension correction via tooth width, two-roll or two-ball gauge, measuring stop, shift strategy with defect management per generating cutter and cutting force monitoring with automatic retraction. Technologies: generating milling, single-part milling and worm gear milling both radially and tangentially. A hand-held device with a handwheel allows setup directly in the working area. Technical data: max. workpiece Ø 500 mm, max. module 12, max. milling cutter Ø 200 mm, max. milling cutter length 240 mm, shift travel 200 mm, milling cutter speed 100–450 rpm, swivel angle +25°/−45°, travel radial 325 mm (axis distance 25–350 mm), travel axial 400 mm (310–710 mm), table diameter 450 mm, table bore 125 mm, connection power approx. 60 kVA. Installation dimensions incl. automation approx. 7.2 × 4.5 × 3.3 m, weight approx. 16.8 t. Equipment: machine enclosure, chip conveyor, gripper unit with two grippers, workpiece storage with 32 positions, preparation for emission extraction (150 mm nozzle, Harting connector on the machine roof). Documentation complete in German: operating manual, electrical diagrams with parts lists, hydraulic and lubrication diagrams. Serwema optionally offers: trial part milling in our factory, additional milling arbors, assembly and commissioning at your location, operator training and a control system upgrade to Sinumerik ONE. Spare parts and service come from a single source, worldwide, even after the purchase.

Condition: as good as new (ex-display), Year of construction: 2022, Wood-Mizer MS300 High-precision table saw Machine used for training and demonstrations, checked and factory-adjusted. Bljdeyr Dfajpfx Ahdsp Processing parameters: Max. thickness at perpendicular cut: 100 mm Max. thickness at 45° cut: 65 mm Technical specifications: Circular saw Arbor diameter: 30 mm Saw blade diameter: 315 mm Max. blade width: 4 mm Blade tilt adjustment range: 0–45° Distance between blade and parallel fence: 800 mm Saw blade speed: 4,500 rpm Sliding table (aluminum): Table length: 1,400 mm Table width: 350 mm Sliding stroke: 1,235 mm Sliding table extension: 500 x 360 mm Working table (cast iron): Table length: 900 mm Table width: 750 mm Table height: 850 mm Table extension: 520 x 150 mm Motor: 3 kW Extraction ports: 1x100 mm, 1x60 mm Weight: 260 kg

Condition: new, functionality: fully functional, mileage: 1 km, power: 47.81 kW (65.00 HP), fuel type: diesel, color: yellow, empty load weight: 6,530 kg, operation weight: 6,530 kg, tire condition: 100 %, drive condition: 100 %, chain condition: 100 %, axle configuration: 2 axles, number of seats: 1, emission class: euro5, Year of construction: 2025, Equipment: cabin, crane, Wheeled Excavator G70X Wheeled Excavator The G70X wheeled excavator is a powerful, precise, and highly mobile machine, ideal for all types of construction work. Powered by a Euro 5 Yuchai F3065-S580 engine delivering 48 kW (65 hp), the G70X offers excellent performance, reliability, and low emissions. Advanced hydraulic technology and efficient operational parameters make this excavator indispensable on any professional job site. Blsdpfx Ahexr Rwhjdsp Engine and Hydraulic Efficiency Equipped with the Euro 5 Yuchai F3065-S580 engine, the G70X delivers 48 kW (65 hp) and complies with stringent Euro 5 emission standards for environmental friendliness. The engine provides a balance between high power and fuel efficiency, enabling prolonged operation without frequent refueling. The hydraulic oil flow rate of 85 L/min and a main relief valve pressure of 24.5 MPa ensure powerful work performance for rapid, precise movements and high digging force. Excellent Work Parameters The G70X offers a wide operational range, with a maximum digging reach of 6,535 mm, minimizing the need for frequent repositioning. It achieves a maximum digging depth of 3,530 mm, digging height of 6,715 mm, and dumping height of 4,905 mm, making it suitable for deep excavation and efficient material handling at height. Speed and Maneuverability Engineered for high mobility, the G70X attains a maximum travel speed of 30 km/h for rapid transit on the job site. The platform rotation speed is 8.5 rpm, enabling precise control in confined spaces. With a minimum front turning radius of 2,275 mm and a rear turning radius of 1,665 mm, the excavator offers excellent maneuverability, ideal for work in narrow or challenging terrains. Technical Data Weight: 6,530 kg Engine: Euro 5 Yuchai F3065-S580 Engine power: 48 kW (65 hp) Oil flow rate: 85 L/min Main relief valve pressure: 24.5 MPa Maximum digging force: 35 kN Maximum travel speed: 30 km/h Platform rotation speed: 8.5 rpm Fuel tank capacity: 135 L Hydraulic oil tank capacity: 120 L Maximum digging reach: 6,535 mm Maximum digging depth: 3,530 mm Maximum digging height: 6,715 mm Maximum dumping height: 4,905 mm Minimum front turning radius: 2,275 mm Minimum rear turning radius: 1,665 mm Overall length: 5,950 mm Overall width: 2,010 mm Overall height: 2,800 mm Wheelbase: 2,410 mm Tire size: 195/85-20 Ground clearance: 430 mm Blade width: 1,980 mm Blade height: 390 mm Bucket width: 700 mm Boom length: 3,400 mm

Condition: used, functionality: fully functional, Grinding wheel flange with counter flange and balancing weights Two-part, consisting of: Bljdpfxsy Nlh Ej Ahdjp • Flange cone with cone featuring the marking 508x10 - 90x203.2 and 015 022 001 0 • Counter flange with marking 610x10 - 110x203.2 and 015 333 001 0, as well as mounted adjustable balancing weights Precision grinding wheel mounts for Karstens K56 external cylindrical grinding machine, wheel bore H 203.20, large cone 60 mm 3 grinding wheel flanges with counter flange and balancing weights available The flanges are used. Price negotiable. Our asking price is €540 net, ex works, plus packaging costs. All technical data is subject to printing errors and omissions. Sale exclusively to countries within the EU.

Condition: excellent (used), CATALOGUE NUMBER 6650 TECHNICAL DATA - max cutting height 200mm - track width 450mm - shaft width 450mm - blade arbor diameter 80mm - shaft diameter 60mm - min blade diameter 250mm - max blade diameter 350mm - max blank width 870mm - min blank length 1500mm from above: - pawls - driving shaft, toothed, metal - pawls - driving shaft, toothed, metal - pressure roller - shaft with blades - 2 driving shafts, metal, pneumatically pressed from below: - guide - metal sliding roller - pawls Bedjzxqvdjpfx Ahdolp - track - shaft with blades - track - stepless feed speed adjustment via frequency inverter 4-40m/min - main motors 2x75kW - feed motor 3kW - electric lifting of the machine body up/down 0.55kW - electric adjustment of the blade shafts 2×0.25kW - central lubrication - diameter of the extraction nozzle 2x300mm - dimensions L/W/H 3100x2600x2000mm - weight approximately 6500kg - Centering device included - toothed driving rollers 3 pcs - smooth driving rollers 8 pcs - motor 2×1.5kW - pneumatic pressure roller (from above) - side pressure roller - dimensions L/W/H 4850/1100/1800mm - weight approximately 1000kg ADVANTAGES - made in the Czech Republic - twin-shaft - centering device - DTR documentation - year of manufacture 2010 - multi-blade saw, used, very good condition Net price: 262900 PLN Net price: 61140 EUR Net price calculated according to the exchange rate of 4.3 PLN/EUR (in case of significant exchange rate fluctuations, the price may change)